An electromagnet is different from an iron magnet because
A It will require a battery pack to charge it
B. it can also be plugged in to run a toaster
C. it is created by an electric current
D. it is always painted blue

PLEASE HELP THIS IS FOR A SERIOUS TEST​

Answer: [tex]AgNO_3(aq)+NaOH(aq)\rightarrow AgOH(s)+NaNO_3(aq)[/tex]

Explanation:

A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.  

A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.  

The equation which represents a precipiation reaction is:

[tex]AgNO_3(aq)+NaOH(aq)\rightarrow AgOH(s)+NaNO_3(aq)[/tex]

Answer:

Explanation:

If observed through the year, the constellations shift gradually to the west. This is caused by Earth's orbit around our Sun. In the summer, viewers are looking in a different direction in space at night than they are during the winter.

Answer:

b

Explanation:

Answer:

Emma's conclusion is not scientific. She is stating an opinion because she thinks her investigation was good which is not necessarily scientific.

Answer:

The levels, from smallest to largest, are: molecule, cell, tissue, organ, organ system, organism, population, community, ecosystem, biosphere.

Explanation:

The biological levels of organization of living things arranged from the simplest to most complex are: organelle, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere.

Answer:

the matter

from largest to smallest.

- organism-organ-organelle-tissue-cell-atom-elements-molecule

Answer:

Dirt

mud

rocks

ect.

Explanation:

Answer:

26.88 L

Explanation:

When any gas is held under standard conditions, one mol will occupy 22.4 liters.

With the above information in mind, we can calculate how many liters would 1.20 moles of CH₄ gas occupy under standard conditions:

1.20 mol * 22.4 L/mol = 26.88 L

So 1.20 moles of CH₄ would occupy 26.88 liters.

Answer: about 1,705,536 hrs

24 hrs = 1 day

189 hrs = 1 week

756 = 1 month

9072 = 1 yr

1,705,536 = 188 yrs

Explanation:

Trust Milky. Milky smart

Answer:

Because the rock underwent lava and heat/pressure transformation. They are cooled and heated by magma, and then under go pressure. No fossils would be found in those.

Explanation:

Hope this helps! :)

Answer:

Because...

Explanation:

Igneous rock is cooked in extreme hot temperatures.

Metamorphoc is lava cooled downed.

Explanation:

dissolve more quickly than a whole antacid tablet.

Answer:

300

Explanation:

moles of He=4 L/22.4 L=0.1786 mol

moles of Ne=2 L/22.4 L=0.0893 mol

total moles of the gas mixture

=0.1786+0.0893

=0.2679 mol

mole fraction of He=0.1786 mol/0.2679 mol=0.6667

mole fraction of Ne=0.0893 mol/0.2679 mol=0.3333

Answer:

22.41 Liters

Explanation:

Using the general law equation;

PV= nRT

Where;

P = pressure (atm)

V = volume (L)

n = number of moles (mol)

R = gas law constant (0.0821 Latm/molK)

T = temperature (K)

According to the information provided in this question,

mass of water vapor = 18g

Molar mass of water (H2O) = 1(2) + 16 = 18g.

mole = mass/molar mass

- mole (n) = 18/18 = 1mol

V = ?

T = 273K

p = 1 atm

Using PV = nRT

V = nRT/P

V = 1 × 0.0821 × 273/1

V = 22.41 Liters

Answer:

7.96g, 33.79%

Explanation:

I'll try my best to explain the entire process behind this question ;)

From the question, you can write the reaction

[tex]2H_2O(l)->2H_2(g)+O_2(g)[/tex]

Now, there are a few reasons it is like this. Oxygen is a diatomic element, meaning it doesn't and can't exist as just O. It exists as O₂. To balance, this, double the amount of water and hydrogen so there is an equal amount of  each element on both sides of the reaction (4 H's, 2 O's on the reactant side, and 4 H's, 2 O's on the product side).

From this we can get a mole-to-mole ratio.

Onto the stoichiometry. Our goal in this is to convert from grams of water to grams of hydrogen, and we do so with a mole to mole ratio.

[tex]71.0gH_2O*\frac{1molH_2O}{18.02g} *\frac{2molH_2}{2molH_2O}* \frac{2.02g}{1molH_2}\\\\ =7.96gH_2[/tex]

Basically, what I did was divide by water's molar mass to get moles of water, multiplied by the mole-to-mole ratio (2:2) to get moles of H2, and then multiplied by H2's molar mass to get what should be the amount of H2 produced by the reaction.

For percent yield, you can calculate it is such:

[tex]\frac{Actual}{Theoretical}*100[/tex]

Plug the numbers in:

[tex]\frac{2.69g}{7.96g}*100\\\\ =33.79%[/tex]

So, the percent yield is 33.79%

Answer:

30 g

Explanation:

In order to convert from moles of CH₃COOH to grams, we need to use its molar mass:

Now we convert moles into grams:

So 0.5 moles of CH₃COOH have a mass of 30 grams.

Answer:

1 and 4

Explanation:

1- Base substitutions.

2- Deletions.

3- Insertions.

Answer:

Greater than or less than

Answer:

2 Cu2S + 3 O2 = 2 Cu2O + 2 SO2

Explanation:

2 Cu2S + 3 O2 = 2 Cu2O + 2 SO2

Answer:

See below

Explanation:

The following reasons tell why atom combine to form compounds:

1) They want to follow octet or duplet rule and attain the noble gas configuration.

2) They combine to form compounds because of the electrostatic attraction between them.

3) They form compounds to lower their energy and to become stable.

[tex]\rule[225]{225}{2}[/tex]

Hope this helped!

Answer:

about 4.8kJ

Explanation:

There is some missing information in the question given.

For use to determine the amount of heat that must be reacted in the system to convert 100g of NaNO₃ into NaHSO₄(s);

Then, we need to consider the following reaction between sodium nitrate (NaNO₃)  and sulfuric acid (H₂SO₄):

[tex]\mathbf{NaNO_{3(s)}+ H_2SO_{4(l)}\to NaHSO_{4(s)}+HNO_{3(g)} \ \ \ \ \ \Delta H = 21.2 \ kJ}[/tex]

From the above reaction, 84.99 gm of NaNO₃ reacted with H₂SO₄ which is converted into NaHSO₄ thereby absorbing 21.2 kJ amount of heat.

This implies that; if 84.99 gm of NaNO₃ absorbs 21.2 kJ amount of heat.

1 gm of NaNO₃ will absorb = [tex]\mathsf{\dfrac{21.2}{84.99} \ kJ \ heat}[/tex]

= 0.2494 kJ amount of heat.

∴

100 g of NaNO₃ will absorb [tex]= \mathsf{\dfrac{21.2}{84.99} \times 100 \ kJ \ heat}[/tex]

= 24.94 kJ amount of heat.

Therefore, we can conclude that the amount of heat that must be absorbed by the reaction system to convert 100g of NaNO3 into NaHSO4(s) is 24.94 kJ.

Learn more about the amount of heat absorbed in a chemical reaction here:

https://brainly.com/question/3521372?referrer=searchResults

Answer:

CH₂O

Explanation:

From the question given above, the following data were obtained:

Carbon (C) = 39.9%

Hydrogen (H) = 6.7%

Oxygen (O) = 53.4%

Empirical formula =?

The empirical formula of acetic acid can be obtained as follow:

C = 39.9%

H = 6.7%

O = 53.4%

Divide by their molar mass

C = 39.9 / 12 = 3.3

H = 6.7 / 1 = 6.7

O = 53.4 / 16 = 3.3

Divide by the smallest

C = 3.3 / 3.3 = 1

H = 6.7 / 3.3 = 2

O = 3.3 / 3.3 = 1

The empirical formula => CH₂O

Answer:

1- gram of oxygen, 2- 3.01x1023 atoms of oxygen, 3- 1 molecule of oxygen, 4- 1mole of oxygen, 5- 1atom of oxygen.

Answer:

A: ZnS(s) + 2O2(g) --> ZnSO4(s)

Explanation:

;) good luck

Answer:

The answer is A or the first choice

Explanation:

ZnS(s) + 2O2(g) Right arrow. ZnSO4(s)

HAVE A GREAT DAY STAY SAFE

Answer:

Examples of chemical changes are burning, cooking, rusting, and rotting. Examples of physical changes are boiling, melting, freezing, and shredding. Often, physical changes can be undone, if energy is input.

Hope this helped.

Answer:

9.15 atm

Explanation:

Ideal gas equation of state PV=nRT

P in hPa, V in L, n in mol, R is a constant which is 83.1 hpa*L/mol*k, T in kelvin.

Plug in all the number, and we will get:

P*6.21=2.02*83.1*343

P =9271.6(in hpa)=9.15 atm

Answer:

B

Explanation:

A body moving with a constant speed and constantly changing direction and changing velocity is said to be in circular motion.

Answer:

The size of the gravitational force is proportional to the masses of the objects and weakens as the distance between them increases.