The correct answer is B. Electrons emit and absorb energy based on their position around the nucleus.
Explanation:
In general, an atom's emission of photons (light) is the result of electrons, which are the negative charge particles that orbit the nucleus. Moreover, the emission of light is likely to occur if the electron is located at a specific energy level (position in the atom) and it moves to a lower level as this requires the loss of energy in the form of photons. Also, the electron can absorb the photons and as a result gain enough energy to move to a higher level. This implies the atom's emissions of light shows the relationship between electrons emitting and absorbing energy and their position or energy level.
Answer:
The correct answer is B. Electrons emit and absorb energy based on their position around the nucleus.
On edge :)
Explanation:
If a person is standing up in a moving bus that stops suddenly,the person can easily fall forwards.Has a force acted to push the person forwards? Use Newton's law of motion to explain what is happening.
Answer:
i think gravity created a force strong enough to push him down.but it also depends how slow or fast the bus is going
Explanation:
gravity as we all now it is pretty strong so if the bus is going fast then the person standing up will fall but if the bus is going pretty slow then it'll just nudge him.
13.
14. Why does a person feel weightlessness during freefall?
Answer:
When in free fall, the only force acting upon your body is the force of gravity - a non-contact force. Since the force of gravity cannot be felt without any other opposing forces, you would have no sensation of it. You would feel weightless when in a state of free fall.
6. What is Mass????????????????
The position of a particular particle as a function of is given by r=(8.5t i+5.6j-2tk )m (a) Determine the particle’s velocity and acceleration as a function of time.
(b) Find the instantaneous velocity and acceleration of the particle at t=3.0 s.
Answer:
use google to find answer
Explanation:
69 69 69 69 69 69
Nami conducts an investigation on plants. She places a grow light on a timer to give the plants different amounts of light to see if this would affect their growth. Which term describes the amount of light in this investigation?
Answer:
It is independent variable
Explanation:
Answer:
D!!!!!
Explanation:
edge 2021!
Let's start by calculating what acceleration the rocket must produce to launch into earth orbit. In order to attain orbit around earth, the ATLAS V rocket must accelerate up to a speed of about 7700 meters per second in about 4.2 minutes. What average acceleration is required to accomplish this
Answer:
30.56 m/s^2
Explanation:
Given that In order to attain orbit around earth, the ATLAS V rocket must accelerate up to a speed of about 7700 meters per second in about 4.2 minutes.
The average acceleration that is required to accomplish this will be
Average acceleration = change in velocity / time
Average acceleration = 7700/ 4.2 × 60
Average acceleration = 7700/252
Average acceleration = 30.56 m/s^2
How is newton's third law different from newton's first law
Answer : Newton's first law of motion (also known as Law of Inertia) describes about the tendency of an object to resist change from its state of rest / motion / direction (inertia).
Whereas, Newton's third law of motion tells us that forces exists in pairs. It talks about the action & reaction forces, which are equal in magnitude but opposite in direction.
In this way, Newton's third law of motion is different from Newton's first law of motion.
Organized procedure to study something under controlled conditions
can anyone help me with this.
Answer:
A. smaller arteries
Explanation:
A. because it makes no sence.
Air conditioners operate on the same principle as refrigerators. Consider an air conditioner that has 7.00 kg of refrigerant flowing through its circuit each cycle. The refrigerant enters the evaporator coils in phase equilibrium, with 54.0 % of its mass as liquid and the rest as vapor. It flows through the evaporator at a constant pressure and when it reaches the compressor 95% of its mass is vapor. In each cycle, how much heat Qc is absorbed by the refrigerant while it is in the evaporator? The heat of vaporization of the refrigerant is 1.50×105 J/kg
Answer:
5.15J
Explanation:
First. 54% of the 7kg refrigerant is liquid
So we find mass of vapour at inlet generator
M1 = ( 1-0.54)*7= 3.2kg
At compressor mass of vapour will be
M2= 0.95*7= 6.7kg
So the Mass of vapour at exit generator is
M2-M1= 3.5kg
So to find heat absorbed by refrigerant in evaporation
Its using
Q= mh
°= 3.5x 1.50×10^5 J/kg
=5.15J
Protons are launched with an initial speed 9550 m/s at 37° above the horizontal, into a region where a uniform vertical electric field is present. The protons hit a target at a horizontal distance 1.27 mm from the point where the protons are launched. Find the electric field, the time of flight, and the maximum height reached by the protons above the point where they were launched.
Answer:
E=720,5 N/C
H=0,24mm
Explanation:
360 s to ms? Need help! Converting units, with work pls
1 s = 1,000 ms
2 s = 2,000 ms
3 s = 3,000 ms
.
.
10 s = 10,000 ms
20 s = 20,000 ms
30 s = 30,000 ms
.
.
.
100 s = 100,000 ms
200 s = 200,000 ms
300 s = 300,000 ms
310 s = 310,000 ms
320 s = 320,000 ms
.
.
.
350 s = 350,000 ms
360 s = 360,000 ms
370 s = 370,000 ms
.
.
.
A nucleus with a mass number of 64 has a mean radius of about: _________.
A. 4.8 fm.
B. 19 fm.
C. 77 fm.
D. 260 fm.
E. 2.6 × 10 5 fm
Answer:
The correct option is A
Explanation:
From the question we are told that
The mass number is [tex]A= 64[/tex]
Generally the mean radius is mathematically evaluated as
[tex]R = R_o A^{\frac{1}{3} }[/tex]
Here [tex]R_o[/tex] is a constant with a value [tex]R_o =1.2*10^{-15}[/tex]
So
[tex]R = 1.2*10^{-15} * 64^{\frac{1}{3} }[/tex]
[tex]R = 4.8 *10^{-15} [/tex]
[tex]R = 4.8\ fm [/tex]
The mean radius of a nucleus with the given mass number is 4.8 fm.
Hence, Option A. 4.8 fm is the correct answer.
Given the data in the question;
Mass number of nucleus; [tex]A = 64[/tex]
Mean radius; [tex]R =\ ?[/tex]
The volume of the nucleus is directly proportional to the total number of nucleons.
The radius of a nucleus, R, is approximately:
[tex]R = R_oA^{\frac{1}{3} }[/tex]
Where R is the radius, R₀ is constant for all nuclei ([tex]1.2*10^{-15}m \ or\ 1.2fm[/tex] ) and A is the mass number.
We substitute our values into the equation
[tex]R = 1.2fm\ *\ 64^{\frac{1}{3} }\\\\R = 1.2fm\ *\ 4\\\\R = 4.8 fm[/tex]
The mean radius of a nucleus with the given mass number is 4.8 fm.
Hence, Option A. 4.8 fm is the correct answer.
Learn more: https://brainly.com/question/1371394
What is the speed of an object that travels 60 meters in 4 seconds?
Answer:
15 m/s
Explanation:
s=d/t
s=60/4
s=15 m/s
Answer:
The answer would be 15 m/s
Explanation:
s=d/t
s=60/4
s= 15 m/s
Have a beautiful day beautiful
You welcome.
What is the dependent variable in this hypothesis?
After finding that objects of the same mass do not
always float or submerge the same way in a tub of
liquid, Alexis wrote a new hypothesis to test objects that
have the same mass.
o the mass of the object
O the surface area of the object
O the amount of water displaced
O the height at which the object floats
If the surface area of an object increases, then it
will float higher in the tub, because the object
would need to displace more liquid in order to sink
all the way down.
Answer:
The height at wich the object floats
Explain
took on edge 2020
Answer:
the height at which the object floats
Edge 2021
A train rounding a curve at a steady speed, balanced or unbalanced force?
Answer:
Unbalanced
Explanation:
It would be speeding and under the influence of an imbalanced force if it were rounding a curve. The train must be subject to an unbalanced force in order for it to continue moving at a constant speed.
What curves a steady speed, balanced or unbalanced force?Newton's first law is only this one. Unless operated upon by an imbalanced force, an item at rest remains at rest and an object in motion maintains constant speed in the same direction.
The car tends to maintain its travel at a steady speed and direction because the two forces balance each other out and cancel each other out.
The forces are out of balance when an object's motion changes. Equal in size and directed in the opposite direction, balanced forces are. When forces are evenly distributed, motion remains unchanged.
Therefore, One of your scenarios from the previous section involved pushing or pulling an object with the equal amount of force in opposite directions.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
I need help ASAP plzzz!!!!
Answer:
1. coffee maker 2.store B. 3.yes 5. 180
Is steel considered matter
Answer:
yes. everything around you is matter including you!
Answer:
yes
Explanation:
because it takes up space
A wire 6.60 m long with diameter of 2.05 mm has a resistance of 0.0310 Ω.
Find the resistivity of the material of the wire.
rho= Ω*m
Answer:
1.551×10^-8 Ωm
Explanation:
Resistivity of a material is expressed as shown;.
Resistivity = RA/l
R is the resistance of the material
A is the cross sectional area
l is the length of the wire.
Given;
R = 0.0310 Ω
A = πd²/4
A = π(2.05×10^-3)²/4
A = 0.000013204255/4
A = 0.00000330106375
A = 3.30×10^-6m
l = 6.60m
Substituting this values into the formula for calculating resistivity.
rho = 0.0310× 3.30×10^-6/6.60
rho = 1.023×10^-7/6.60
rho = 1.551×10^-8 Ωm
Hence the resistivity of the material is 1.551×10^-8 Ωm
Do states give up all power to withdraw when they join a union of states, or do they still retain some control over their fate?
is the
What is the tendency to move to a drive-free state?
O A. Homeostasis
OB. Equality
OC. Homogeneity
OD. Motivationless
Calculate the average speed between 0 s and 20 s
Answer:
2 m/s
Explanation:
The following data were obtained from the question:
Distance (D) = 40 m
Time (t) = 20 s.
Average speed =?
Average speed is the total distance travelled divided by the total time taken. Mathematically, it is expressed as:
Average speed = Total distance /Total time
Thus, we can obtain the average speed as follow:
Total Distance (D) = 40 m
Time time (t) = 20 s.
Average speed =?
Average speed = Total distance /Total time
Average spee= 40/20
Average speed = 2 m/s
Therefore, the average speed between 0 and 20 seconds is 2 m/s.
Physics Question (attached)
Answer:
The answer is "[tex]\bold{10.6 \ \ \frac{m}{s^2}}[/tex]"
Explanation:
The Formula of acceleration:
[tex]\bold{a= \frac{v-v_0}{t}}[/tex]
Given value:
[tex]t= 50\\v= 856\\v_0= 324[/tex]
Calculating the acceleration:
[tex]\to a = \frac{(856 - 324)}{50}\\\\[/tex]
[tex]= \frac{(532)}{50}\\\\= \frac{(106.4)}{10}\\\\= 10.64 \ \ \frac{ m}{s^2}[/tex]
Help please Subject (general psychology)
Answer:
plz give the question... floor the proper answer
Explanation:
plz mark me add the brainliest
thank
me and follow ma
A 0.091-in-diameter electrical wire at 90°F is covered by 0.02-in-thick plastic insulation (k = 0.075 Btu/h·ft·°F). The wire is exposed to a medium at 50°F, with a combined convection and radiation heat transfer coefficient of 2.5 Btu/h·ft2·°F. Calculate the critical radius (rcr) of the plastic insulation (in inches).
Answer:
The critical radius of the plastic insulation is 0.72 inches.
Explanation:
Given that,
Diameter = 0.091 in
Thickness = 0.02 in
Initial temperature = 90°F
Final temperature = 50°F
Heat transfer coefficient = 2.5 Btu/h.ft²°F
Material conductivity = 0.075 Btu/h.ft °F
We need to calculate the critical radius of the plastic insulation
Using formula of critical radius
[tex]r_{cr}=\dfrac{2K}{h}[/tex]
Where, k = Material conductivity
h = Heat transfer coefficient
Put the value into the formula
[tex]r_{cr}=\dfrac{2\times0.075}{2.5}[/tex]
[tex]r_{cr}=0.06\ ft[/tex]
[tex]r_{cr}=0.72\ inches[/tex]
Hence, The critical radius of the plastic insulation is 0.72 inches.
Two satellites orbit earth at altitudes of 7500 km and 15000 km above earth's surface. Which satellite is faster and by what factor?
Answer:
The satellite that is 7500 km above earth's surface is 1.24 times faster than the satellite at 15000 km above earth's surface
Explanation:
Generally the gravitational force acting on each satellite is mathematically represented as
[tex]F = \frac{G * M_e * m_2 }{r^2}[/tex]
Here [tex]M_e[/tex] is the mass of the earth
[tex]r = r_e + R [/tex]
So [tex] r_e [/tex] is the radius of the satellite and R is the radius of earth with value R = 6371 km
This force is also equivalent to the centripetal force acting on each satellite which is mathematically represented as
[tex]F = \frac{mv^2}{ r^2}[/tex]
So
[tex]\frac{mv^2}{ r^2} = \frac{G * m_1 * m_2 }{r^2}[/tex]
=> [tex]v = \sqrt{ \frac{GM_e}{r} }[/tex]
So for [tex]r = 7500+ 6371 = 13871 \ km [/tex]
We have that
[tex]v_1 = \sqrt{ \frac{GM_e}{13871} }[/tex]
and [tex]r = 15000+ 6371 = 21371 \ km [/tex]
We have that
[tex]v_2 = \sqrt{ \frac{GM_e}{21371} }[/tex]
So
[tex]\frac{v_1}{v_2} = \frac{\sqrt{\frac{GM_e}{13871} } }{ \sqrt{\frac{GM_e}{21371}} }[/tex][tex]v = \sqrt{ \frac{GM_e}{r} }[/tex]
=> [tex]\frac{v_1}{v_2} = \sqrt{ \frac{21371}{13871} }[/tex]
=> [tex]v_1 = 1.24 v_2[/tex]
So satellite that is 7500 km above earth's surface is 1.24 times faster than the satellite at 15000 km above earth's surface
The foundation of psychology is?
Case Studies
O Experiments
O Research
O Analysis
Answer:
Case Studies
Explanation:
A case study in psychology is a descriptive research approach used to obtain in-depth information about a person, group, or phenomenon.Case studies use techniques such as personal interviews, direct observation, psychometric tests, and archival records to gather information.
This ball is technology too! It can be
rolled, kicked, or thrown. Is that a need
or a want?
Answer:
want
Explanation:
people always want the new thing especially if its technology
The various types of tree sloths share the honor of being the slowest-moving
mammals. An average tree sloth moves with a speed of 0.743 m/s. How long does it
take a sloth moving at this speed to travel 22.30 m?
Answer:
16.568 Minutes
Explanation:
Time = speed (m/s) x distance (m)
What contributions did Johannesburg Kepler make
Answer:
Multiple
Explanation:
He was the first to determine that refraction drives vision in the eye. Using two eyes enables depth perception. Kepler is also known for defining laws regarding planetary motion.