Explanation:
1.-Ate-contains 3 elements in which one is oxygen2.-ite-contains 3 elements in which one is Oxygen but the oxygen is less than that of -Ate3.-ide has 2 elements58. What is the temperature if 30.1 g of N, in a 1.00-L container is at a pressure of 25.2 atm?
DUE TONIGHT. LINKS DONT WORK SO PLS SHOW WORK. THANK YOU SO MUCH
Answer:
14°C
Explanation:
In order to use the ideal gas law, you need the number of moles of N2 present.
30.1 g x (mol / 28.02 g) = 1.07 mol N2
Use the ideal gas law: PV = nRT
Now isolate for T(temperature) and plug in your other values:
T = PV / nR
T = (25.2 atm)(1.00 L) / (1.07 mol)(0.08206)
T = 287 K
T(°C) = 287 K - 273 K = 14°C
Therefore, the temperature is 14°C
5. Organisms that make their own energy storage molecules are called producers. What process do
they go through to create these molecules?
Answer:
I think it's metabolism
Hope this helps
6. A piece of solid gold was heated from 274K to 314K. 35.73 of energy was needed to raise the temperature.
What mass of gold was present?
From Q = mcΔT, we can rearrange the equation to solve for mass, m = Q/cΔT. The specific heat capacity, c, of solid gold is 0.129 J/g °C. I'm assuming that the energy is given in joules, as it's not specified in the question as written.
m = Q/cΔT = (35.73 J)/(0.129 J/g °C)(40.85 °C - 0.85°C)
m = 6.92 g of gold was present
The heat of the substance depends on the mass, specific heat, and temperature change of the system. The mass of gold that was present was, 6.92 g.
What is mass?Mass of the substance in the thermodynamic system is the ratio of the heat to the product of the specific heat and the temperature change. It is given as,
[tex]\rm m = \rm \dfrac{Q}{c \Delta T}[/tex]
Given,
Heat (Q) = 35.73 J
Specific heat (c) = 0.129 J/g °C
Temperature change = 40 degrees celsius
Mass of gold is calculated as:
35.73 ÷ (0.129) (40) = 6.92 gm
Therefore, 6.92 gms of gold is present.
Learn more about mass here:
https://brainly.com/question/15528502
#SPJ2
Xavier was conducting a long term study of two populations of butterflies. Both populations had the same number of individuals. Both populations lived in forests that were the same size. Population A lived in a forest that was full of milkweed, the favorite food of this butterfly species. Population B lived in a forest that had limited amounts of milkweed and other foods. Over many years, Xavier found that one of the populations was showing signs of evolutionary change. Their mouth parts were changing and they could get food from new kinds of plants. Which statement explains why one population would be more likely to evolve in response to natural selection? *
a. Population B would be more likely to change because it has a ready supply of food, and only certain butterflies would be able to survive
b. Population A would be more likely to change because it has a ready supply of food and only certain butterflies would be able to survive
c. Population A would be more likely to change because it has a limited amount of food and some butterflies might be better able to get enough food, survive, and reproduce
d. Population B would be more likely to change because those butterflies have a limited supply of food, and butterflies with certain traits might be better able to get enough food, survive, and reproduce.
water is at 0 degrees celsius if we continue to remove energy from the water what phase changes would occur
Answer:
Solid/freezing
Explanation:
Solid has the least energy of all of the phase changes and the more energy is lost the colder its gets then water turns into a solid called ice hope i helped!
Plz help ASAP plz and thx if u help
Answer:
3. c
4. d
5. c
Explanation:
A nuclear power plant is used to generate:
steam
solar energy
heat energy
electricity
Answer:
Anuclear power plant is used to generate electricity
Answer:
Anuclear power plant is used to generate electricity
thank me later
Explanation:
Is a animal searching for water a stimulus or response
Answer:
response I believe
Explanation:
i'm pretty sure it's a response cause it's the animal responding to needing water and being thirsty
hope this helps! :)
Why or how, do electrons receive a positive charge during beta decay?
Answer: Beta decay occurs when a nucleus is unstable because it has too many or too few neutrons relative to protons. The nucleus emits a beta particle and energy. In beta-minus decay, a neutron breaks down to a proton and an electron, and the electron is emitted from the nucleus.
Explanation:
PLEASE HELP
Find the kinetic energy of the horse using KE=1/2mv^2.
Answer:
78878
Explanation:
what are two places that producers can get energy?
Answer:
The Food Chain: The answer has to do with trophic levels. As you probably know, the organisms at the base of the food chain are photosynthetic; plants on land and phytoplankton (algae) in the oceans. These organisms are called the producers, and they get their energy directly from sunlight and inorganic nutrients.
Explanation:
Brainliest?
How many moles of calcium nitrate would react with 4.55 moles of chromium (III) sulfate to produce calcium sulfate and chromium(III) nitrate?
Answer:
13.65 moles
Explanation:
The equation of the reaction is;
3Ca(NO3)2 + Cr2(SO4)3 = 3Ca(SO4) + 2 Cr(NO3)3
4.55 moles of chromium (iii) sulfate reacts with calcium nitrate
The mole ratio of Chromium (iii) sulfate to calcium nitrate is 1: 3
Therefore; the moles of calcium nitrate will be given by
= (4.55/ 1)×3
= 13.65 moles
Hence; 13.65 moles of calcium nitrate would react with 4.55 moles of Chromium (iii) sulfate.
Horticulture 100 POINTS Hurry
Which of the following is an example of an indirect expense?
A. corn oil
B. animal fodder
C. export commodity
D. snack foods
Answer:
B!
Explanation:
Answer:
i know im late but i just really want the points. the answer is b.
Explanation:
If a sulfur atom gained 3 protons what atom would be formed?
Answer:
The stable ion the sulfur would form is the sulfide ion,
Explanation:
When any atom accept electrons it converts into negative ion/an anion. So it will change into Z 3− after gaining 3 electrons.
Sulfur is an elemental atom that has an atomic number of 16 and an atomic mass of 32.065 amu. If the sulfur atom gains three protons then potassium will be formed.
What is a proton?A proton has been a sub-atomic particle that has been known to carry a positive charge and are tend to remain inside the nucleus with the neutrons bonded together by the nuclear force.
The proton of the atom is the characteristic property of the element in the periodic table. They are the sole sub-atomic particle that gives the atomic number of the elemental atom.
The sulfur atom has the atomic number 16 which means it has 16 protons, so if three protons are added to it then the number f protons become 19 which is an atomic number of the potassium (K) element.
Therefore, a potassium element is formed.
Learn more about protons, here:
https://brainly.com/question/24508299
#SPJ2
what does the t cell do to your body?
Answer: it's part of the immune system that focuses on specific foreign particles. Rather than generically attack any antigens, T cells circulate until they encounter their specific antigen. As such, T cells play a critical part in immunity to foreign substances !
Explanation:
A pool float was filled with air to capacity in the middle of a hot day. The next morning the pool float looked different yet no gas escaped or entered the float. Describe what you think the float looked like in the morning and why it occurred.
Answer:
The pool float looked would have looked deflated the next morning.
Explanation:
When temperature decreases the volume decreases.
Durante una determinación de acidez en una muestra contaminada, agregas como indicador fenolftaleina y torno a violeta. ¿Qué sustancia utilizarías para titular NaOH o HCI? Y ¿Por qué?
Answer:
HCl, ya que la sustancia es una base que se debe titular con un ácido.
Explanation:
¡Hola!
En este caso, teniendo en cuenta la descripción inicial de la sustancia, la cual se torna violeta cuando se le agrega la fenolftaleína, es posible inderir que esta sustancia es una base con pH básico. Ahora bien, en torno a la especificación de un proceso de titulación, es claro que dicha base debe ser titulada con un ácido, y este caso, con HCl, ácido chlorhídrico, con el fin the alcanzar el punto de equivalencia.
¡Saludos!
The air pressure inside a balloon is 0.783 atm. What is this pressure in mmHg?
Do not include units in your answer.
Answer:
It is the same it does not change
Explanation:
how many moles are in 1.25 grams of MgCl2?
Explanation:
No of moles = mass/ molar mass
MgCl2 = 24+35.5*2
= 24+70
= 94 gmol—1
No of moles = 1.25/94
= 0.013 moles
One mole of magnesium chloride weighs 95.21 grams. Therefore, the number of moles in 1.25 grams of the compound is 0.0131 moles.
What is magnesium chloride ?Magnesium chloride is an ionic compound formed by the electron transfer from magnesium metal to the chlorine atoms.
To determine the number of moles of MgCl₂ in 1.25 grams, we need to use the formula:
moles = mass / molar mass
The molar mass of MgCl₂ can be calculated by adding up the atomic masses of its constituent atoms, which are:
Mg: 24.31 g/mol
Cl: 35.45 g/mol (x2, since there are two Cl atoms in MgCl2)
So, the molar mass of MgCl₂ is:
MgCl₂: 24.31 g/mol + 35.45 g/mol x 2 = 95.21 g/mol
Now we can use the formula to calculate the number of moles:
moles = mass / molar mass = 1.25 g / 95.21 g/mol
moles = 0.0131 mol (rounded to four significant figures)
Therefore, there are approximately 0.0131 moles of MgCl₂ in 1.25 grams.
Find more on MgCl₂
https://brainly.com/question/30262579
#SPJ2
can any one solve this quiz plz
Answer:
1. It is stoichiometric.
2. O2 is the limiting reactant.
3. 9.0 g of C2H6 remain unreacted.
4. 17.6 g of CO2.
5. 85.2%.
Explanation:
Hello there!
In this case, for the given chemical reaction:
[tex]2C_2H_6+7O_2\rightarrow 4CO_2+6H_2O[/tex]
We can see that:
1. It is stoichiometric and is balanced because the reactants yields the products according to the law of conservation of mass.
2. In this part, it is possible to calculate the moles of ethane by using its molar mass:
[tex]n_{C_2H_6}=15g*\frac{1molC_2H_6}{30.08g} =0.50molC_2H_6[/tex]
And the moles of oxygen by knowing that one mole is contained in 22.4 L at STP:
[tex]n_{O_2}=\frac{1mol}{22.4L} *15.68L=0.7molO_2[/tex]
Thus, by calculating the moles of carbon dioxide product by each reactant, we can identify the limiting one:
[tex]n_{CO_2}^{by\ C_2H_6}=0.50molC_2H_6*\frac{4molCO_2}{2molC_2H_6} =1.0molCO_2\\\\n_{CO_2}^{by\ O_2}=0.70molO_2*\frac{4molCO_2}{7molO_2} =0.4molCO_2\\[/tex]
Thus, since oxygen yields the fewest moles of CO2 product, we infer it is the limiting reactant.
3. In this part, we calculate the mass of C2H6 that actually react first:
[tex]m_{C_2H_6}^{reacted}=0.4molCO_2*\frac{2molC_2H_6}{4molCO_2}*\frac{30.08gC_2H_6}{1molC_2H_6} =6.0gC_2H_6[/tex]
Thus, the leftover of ethane (C2H6) as the excess reactant is:
[tex]m_{C_2H_6 }^{leftover}=15g-6.0g=9.0g6.0C_2H_6[/tex]
4. Since 0.4 moles of carbon dioxide were produced, we use its molar mass to calculate the mass as its theoretical yield:
[tex]m_{O_2}^{theoretical}=0.4molCO_2*\frac{44gCO_2}{1molCO_2}=17.6gCO_2[/tex]
5. Finally, the percent yield is gotten by dividing the actual yield by the theoretical one:
[tex]Y=\frac{15g}{17.6}*100\%\\\\Y=85.2\%[/tex]
Best regards!
What does Aluminum and Magnesium oxide create
Answer: MgAl2O4 or Spinel (gemstone)
Explanation:
Using dimensional analysis, convert 523.7 cm into feet. (1 in= 2.54 cm; 12 in=1 ft)
-15962
-2471
-17.18
-43.64
Answer:
17.18
Explanation:
(1 in = 2.54 cm; 12 in = 1 ft)
Formula:- Divide the length value by 30.48
523.7 ÷ 30.48 = 17.181
Thus, The answer is 17.181
-TheUnknownScientist
Answer:
17.18
Explanation:
I hope its helpful......
Look at the picture below. What is the name of the copper salt?
Answer:
The reaction took place is-
Fe + CuSO4 → Fe(SO4) + Cu
the copper salt name is copper sulphate!
The statement describes the name of the copper salt is "copper sulphate."
What are salt?A salt is an ionic substance that is created when a positively charged ion bonds with a negatively charged ion.
The reaction occurred in the context of the image.
Fe + CuSO4(aq) → FeSO4(aq) + Cu(s)
A single displacement reaction is the sort of reaction. In this reaction, the highly reactive metal iron oxidises and creates ferrous sulphate by replacing the copper in copper sulphate by giving up two electrons.
Hence the correct answer is copper sulphate.
Learn more about salt here,
https://brainly.com/question/24893919
#SPJ2
Difference between electro positive and electronegative radical
Answer:
Here's your answerExplanation:
The key difference between electropositive and electronegative radicals is that electropositive radicals are radical compounds having the capacity to electrons and carry a positive charge whereas electronegative radicals are radical compounds having the capacity to gain electrons and carry a negative charge.
I hope it's helpful for you
the element chlorine is a gas. it's formula is cl2 . how many different masses of the cl2 molecule would you expect to find in a sample of chlorine gas ? explain your answer
Answer:
the answer is 3.33⋅1023 molecules of Cl2. Note that 6.022⋅1023 is also known as Avogadro's number, and it can be referred to as the number of molecules in one mole of that substance. Also, I calculated 70.9 because 35.45 g/mol (the mass of one Chlorine atom) times 2 is 70.9 g/mol (Cl2 has two Chlorine atoms).
Explanation:
1. Pressures up to 3000 bar are measured with a dead-weight gauge. The piston diameter is 4 mm. What is the approximate mass in kg of the weights required
Answer:
The approximate mass of the weight required is 348.3 kg
Explanation:
The dimensions of the dead-weight gauge are;
The pressure up to which the dead-weight gauge measures, P = 3,000 bar
The diameter of the piston of the dead-weight gauge, D = 4 mm = 0.004 m
The dead-weight gauge pressure formula is given as follows;
Pressure, P = The weight applied, W ÷ The area the weight is applied, A
∴ The weight applied, W = P × A
Where;
P = Pressure
A = The area the weight is applied
W = The weight applied to the piston
The area the weight is applied, A = The area of the piston = π·D²/4
Where;
D = The diameter of the piston
∴ A = π × (0.004 m)²/4
When P = 3,00 bar, and A = π × (0.004 m)²/4, we have;
The weight applied, W = P × A
∴ W = 3,000 × π × (0.004 m)²/4 ≈ 3,769.9118 N
W ≈ 3,769.9118 N
W = m·g
Where;
m = The mass of weight
g = The acceleration due to gravity ≈ 9.81 m/s²
m = W/g
∴ m = 3,769.9118 N/(9.81 m/s²) ≈ 384.3 kg
The approximate mass of the weight required, m = 348.3 kg.
We started by Solving for the force and then the area of the piston, we then applied the formula for force using the constant for acceleration due to gravity and the mass was found to be 384.34 kg
Given Data
Pressure = 3000 bar
Diameter = 4mm
Let us convert bar to N/mm^2
1 bar = 0.1 N/mm^2
3000 bar = x N/mm^2
= 0.1*3000
= 300 N/mm^2
We know that pressure P = Force/Area
Let us find the area of the piston
Area = πd^2/4
Area = 3.142*4^2/4
Area = 3.142*16/4
Area = 50.272/4
Area = 12.568 mm^2
Let us find the force F
F = P*Area
F = 300*12.568
F = 3770.4 Newton
We know that Force = Mg
g = 9.81 m/s^2
Hence, m = F/g
m = 3770.4/9.81
m = 384.34 kg
Learn more about force here:
https://brainly.com/question/12970081
A certain element has only two naturally occurring isotopes: one with 18 neutrons and the other with 20 neutrons. The element forms I- charged ions when in ionic compounds. Predict the identity of the element. What number of electrons does the charged ion have?
Answer:
[Cl-18]⁻ & [Cl-20]⁻
Explanation:
By definition isotopes are elements with the same number of protons by different number of neutrons. Elements X-18 & X-20 have 17 protons and represent Chlorine isotopes Cl-18 & Cl-20 each with 17 protons and 18 electrons to give the isotopes a -1 oxidation state. Both isotope of chlorine have 7 electron in its valence shell and 10 electrons in its core structure. Gaining 1 electron fills the valence octet and establishes a -1 oxidation state.
please what is catalyst
Answer:
a substance that increases the rate of a chemical reaction without itself undergoing any permanent chemical change.
"chlorine acts as a catalyst promoting the breakdown of ozone"
Explanation:
your welcome!
25 points!! Will give Brainliest What is the molarity of the dilute solution if you dilute 35.0 mL of a 12.0 M solution to make 1000.0 mL of a solution?
Answer:
0.72 good luck with the answer
When the wave passes through the medium
Answer: hewo, there! your answer is Below
A single disturbance passing through a medium is called a pulse.
Explanation:
When the disturbances are repeated in a periodic manner, the pulses generate a continuous wave. Longitudinal waves (also called compression waves – a slinky pushed and pulled) – moves parallel (same direction) to the wave motion.
Hope this helps !!
Have a amazing day !!!!
Answer:
When the energy of a wave passes through the medium, particles of the medium move. The more energy the wave has, the farther the particles of the medium move. The distance the particles move is measured by the wave's amplitude.
Explanation:
A single disturbance passing through a medium is called a pulse. When the disturbances are repeated in a periodic manner, the pulses generate a continuous wave. Longitudinal waves (also called compression waves – a slinky pushed and pulled) – moves parallel (same direction) to the wave motion.