Answer:
A. Ba(OH)₂ (aq) <==> Ba²⁺ (aq) + 2OH¯ (aq)
B. The molar concentration of OH¯ is 0.072 M
C. The pH of the solution is 12.86
Explanation:
A. Dissociation equation
Barium hydroxide Ba(OH)₂ dissolves in water by the following equation:
Ba(OH)₂ (aq) <==> Ba²⁺ (aq) + 2OH¯ (aq)
B. Determination of the molar concentration of OH¯.
We'll begin by calculating the number of mole in 1.5 g of Ba(OH)₂. This can be obtained as follow:
Mass of Ba(OH)₂ = 1.5 g
Molar mass of Ba(OH)₂ = 137 + 2(16 + 1)
= 137 + 2(17)
= 137 + 34
= 171 g/mol
Mole of Ba(OH)₂ =?
Mole = mass / Molar mass
Mole of Ba(OH)₂ = 1.5 / 171
Mole of Ba(OH)₂ = 0.009 mole
Next, we shall determine the molarity of Ba(OH)₂. This can be obtained as follow:
Mole of Ba(OH)₂ = 0.009 mole
Volume of solution = 0.250 L
Molarity of Ba(OH)₂ =?
Molarity = mole / Volume
Molarity of Ba(OH)₂ = 0.009 / 0.250
Molarity of Ba(OH)₂ = 0.036 M
Finally, we shall determine the molar concentration of OH¯.this can be obtained as follow:
Ba(OH)₂ (aq) <==> Ba²⁺ (aq) + 2OH¯ (aq)
From the balanced equation above,
1 mole of Ba(OH)₂ produced 2 moles OH¯.
Therefore, 0.036 M Ba(OH)₂ will produce = 0.036 × 2 = 0.072 M OH¯.
Therefore, the molar concentration of OH¯ is 0.072 M
C. Determination of the pH.
We'll begin by calculating the pOH of the solution. This can be obtained as follow:
Concentration of OH¯, [OH¯] = 0.072 M
pOH =?
pOH = –Log [OH¯]
pOH = –Log 0.072
pOH = 1.14
Finally, we shall determine the pH. This can be obtained as follow:
pOH = 1.14
pH =?
pH + pOH = 14
pH + 1.14 = 14
Collect like terms
pH = 14 – 1.14
pH = 12.86
1. An unknown amount of water
was heated with 3.5 kJ, raising
its temperature from 26°C to
66°C. What was the mass of
the water?
Answer:
20.93 g
Explanation:
From the question given above, the following data were obtained:
Heat (Q) = 3.5 KJ
Initial temperature (T₁) = 26°C
Final temperature (T₂) = 66°C
Mass (M) =?
Next, we shall convert 3.5 KJ to J. This can be obtained as follow:
1 KJ = 1000 J
Therefore,
3.5 KJ = 3.5 KJ × 1000 J / 1 KJ
3.5 KJ = 3500 J
Next, we shall determine the change in the temperature of the water. This is illustrated:
Initial temperature (T₁) = 26°C
Final temperature (T₂) = 66°C
Change in temperature (ΔT) =?
ΔT = T₂ – T₁
ΔT = 66 – 26
ΔT = 40 °C
Finally, we shall determine the mass of the water. This can be obtained as follow:
Heat (Q) = 3500 J
Change in temperature (ΔT) = 40 °C
Specific heat capacity (C) = 4.18 J/gºC
Mass (M) =?
Q = MCΔT
3500 = M × 4.18 × 40
3500 = M × 167.2
Divide both side by 167.2
M = 3500 / 167.2
M = 20.93 g
Therefore, the mass of the water is 20.93 g
Which sentence correctly explains the process and conditions needed for rain to form?
A. Rain only falls during thunderstorms and extreme weather in below freezing temperatures.
B. Ice crystals melt as they fall through a layer of warm air and then refreeze into a solid form as they fall.
C. Water vapor freezes into solid ice crystals, and the temperature of the air should be below freezing.
D. The temperature in the sky needs to be above freezing, and water vapor condenses into liquid water.
Answer:
B. Ice crystals melt as they fall through a layer of warm air and then refreeze into a solid form as they fall.
Explanation:
Answer:B
Explanation:
Rank the following compounds in order of decreasing acid strength using periodic trends. Rank the acids from strongest to weakest.
a. HCl
b. H2S
c. HBr
d. BH3
Answer:
HBr > HCl > H2S > BH3
Explanation:
In many acids, the magnitude of electronegativity of the nonmetal determines the strength of the acid. The less electronegative the non-metal is, the stronger the acidity of the acid.
This is because the less electronegative the nonmetal is, the more easily the H-X bond is broken since it is longer and weaker.
This explains the order of acid strength shown in the answer above.
How are ionic bonds like magnets??
Answer:the opposite charge attracts like magnets
Explanation:
An unknown amount of water
was heated with 3.5 kJ, raising
its temperature from 26°C to
66°C. What was the mass of
the water?
Answer:
20.9grams
Explanation:
Using the formula:
Q = m × c × ∆T
Where;
Q = amount of heat (joules)
m = mass of substance (g)
c = specific heat of water (4.184 J/g°C)
∆T = change in temperature (°C)
According to the provided information;
Q = 3.5kJ = 3.5 × 1000 = 3500J
m = ?
c of water = 4.184 J/g°C
∆T = 66°C - 26°C = 40°C
Using Q = m × c × ∆T
m = Q ÷ (c × ∆T)
m = 3500 ÷ (4.184 × 40)
m = 3500 ÷ 167.36
m = 20.9
mass = 20.9grams
what volume of nitrogen gas is equal too 3.42x10^22 molecules of this substance
if i am correct the volume of nitrogen gas has to equal to molecules density, making the substance 1.27 liters :)
Acetic acid and water react to form hydronium cation and acetate anion, like this:
HCH3CO2(aq) + H2O(l) → H3O^+ (aq) + CH3CO2^-(aq)
Imagine 226. mmol of CH3CO2- are added to a flask containing a mixture of HCH3CO2, H2O, H3O and CH3CO2- at equilibrium, and then answer the following question.
What is the rate of the reverse reaction before any CH3CO2^- has been added to the flask?
Answer:
The answer is "Greater than zero, and greater than the rate of the reverse reaction".
Explanation:
It applies a rate of reaction to the balance, a forward response dominates until it reaches a constant. This process is balanced before 52 mmol of the reactant[tex]HC H_{3} \ CO_2[/tex], to which 3 is added. In balance, that rate of the forward reaction was its rate with forwarding reaction, both of which are higher than 0 as the response has achieved balance so that both species get a level greater than 0.
What are at least 3 pros of using solar energy ?
Answer:
Renewable Energy Source. Among all the benefits of solar panels, the most important thing is that solar energy is a truly renewable energy source
Reduces Electricity Bills
Diverse Applications
Explanation:
The difference between voltaic and electrolytic cells is that:
Answer:
Voltaic cells convert chemical energy to electrical energy by means of an oxidation-reduction reaction. Electrolytic cells convert electrical energy to chemical energy, so they are the opposite of voltaic cells. They require an input of electrical energy to cause an oxidation-reduction reaction.
Explanation:
that good enough for ya my asian friend?
Answer:
This is the answer hopefully you understand this also can you mark me brainliest pls
Some signs of chemical change include
(Select only 1 answer)
A)All of these
B)producing an odor
C)changing color
D)releasing gas
Answer:
I think it would be A honestly...
A balloon is floating around outside your window. The temperature outside is -1 °C, and the air pressure is 0.800 atm. Your neighbor, who released the
balloon, tells you that he filled it with 5.00 moles of gas. What is the volume of gas inside this balloon?
Express your answer to three significant figures and include the appropriate units.
View Available Hint(s)
HA
?
Vballoon
Value
Units
Submit
Part B
A 14.0 L gas cylinder is filled with 5.00 moles of gas. The tank is stored at 7 °C. What is the pressure in the tank?
Express your answer to three significant figures and include the appropriate units.
View Available Hint(s)
Answer:
140 L (3 sig-figs; includes the zero)*
Explanation:
PV = nRT => V = nRT/P
P = 0.800atm
V = ?
n = 5 moles
R =0.08206 L·atm/mol·K
T = -1°C = (-1 + 273)K = 272K
V = nRT/P = (5mol)(0.08206 L·atm/mol·K)(272K)/(0.800atm) = 139.5 L
*=> 140 Liters (3 sig-figs) => zero is a sig-fig b/c it was result of rounding 139.5 Liters to obtain 140 Liters.
Respiration takes place in:
O only plants
O only animals
O both plants and animals
Answer:
both
Explanation:
plants have mitochondria and can preform cellular respiration
animals and plants use oxygen in respiration to produce corbon dioxide
Answer:
I think it's both.
Explanation:
I just looked it up, so yeah.
A. What is the pH of 8.9 × 10−3 M HCl?
B. What is the pH of 8 × 10−8 M HCl?
Answer:
A. p(H) = 2.0506
B. p(H) = 7.0969
Explanation:
A.
p(H)= -log[H+]
p(H)= -log(8.9×10^-3)
p(H) = 2.0506
B.
p(H)= -log[H+]
p(H)= -log(8×10^-8)
p(H) = 7.0969
List the Van't Hoff factor for each of the following solutes and rank their conductivities in solution. Whoever helps me first gets brainliest!!!
Ca(OH)2, SO2, LiCL
Answer:
hopefully this helps is not i have more just let me know
Explanation: #1 Identify the colligative property.
A) vapor pressure lowering
B) freezing point depression
C) boiling point elevation
D) osmotic pressure
E) all of the above
#2 ________ is applied to roads in wintertime so that the ice will melt at a lower temperature.
A) Antifreeze
B) Water
C) Salt
D) Sugar
E) Oil
#3 Give the reason that antifreeze is added to a car radiator.
A) The freezing point is lowered and the boiling point is elevated.
B) The freezing point is elevated and the boiling point is lowered.
C) The freezing point and the boiling point are elevated.
D) The freezing point and the boiling point are lowered.
E) None of the above.
4# Place the following aqueous solutions of nonvolatile, nonionic compounds in order of decreasing osmotic pressure.
I. 0.011 M sucrose
II. 0.00095 M galactose
III. 0.0060 M glycerin
A) I > III > II
B) I > II > III
C) II > III > I
D) III > I > II
E) II > I > III
5# Place the following solutions in order of increasing osmotic pressure. I. 0.15 M C2H6O2 II. 0.15 M BaCl2 III. 0.15 M NaI A) III < I < II B) II < III < I C) I < II < III D) II < I < III E) I < III < IIPLS HELP!! 40 POINTS (Absurd or Spam answers will be reported. No copying from other answers.)
Phases of Matter Activity
Now it is your turn to show what you know about phases of matter and thermal energy transfer! Your task is to create a presentation to explain the transformation of a substance as it changes phases. You may choose to write a story or create a comic strip. For your story or comic, you will create a main character and detail the adventure as your character is exposed to thermal energy, causing it to undergo phase changes from a solid, to a liquid, to a gas. You may create your own comic strip using drawings, presentation software, or this comic strip template.
Your presentation must include the following:
title and introduction of your character, including what substance the character is made of
source of thermal energy your character encountered (conduction, convection, and/or radiation)
detailed description and/or diagram of the particle transformation from solid to liquid phase
detailed description and/or diagram of the particle transformation from liquid to gas phase
You may get creative on this activity. If you are unsure if your idea or software for a presentation will work, contact your instructor for assistance. Be sure to review the grading rubric before you begin.
Answer:
lol i know this isnt the best but Your comic strip can be about how when you put smores in a campfire, the smores become burnt that is example of energy transfer because energy is traveling as heat to another object.
Explanation:
Determine whether each of the following salts will form a solution that is acidic, basic, or pH-neutral.
a. KCl
b. NaClO
c. Al(ClO4)3
d. NH4Cl
e. C5H5NHF
f. NaBr
g. Ca(NO2)2
Answer:
a) Neutral
b) Basic
c) Acidic
d) Acidic
e) Basic
f) Neutral
g)
Explanation:
a) KCl is a neutral salt because K ion in solution form produces both acid and base (KOH)
b) NaClO produces basic solution because ClO− is the conjugate base of a weak acid
c) Al(ClO4)3 will produce acidic solution because ClO4 is component of strong acid
d) NH4Cl will produce acidic solution because NH4+ ion is a strong conjugate acid of the weak base and Cl- is a weak conjugate base of the strong acid
e) Basic
f) Neutral salt
g) Acidic
when ammonium nitrate is found at a fire scene, it may undergo thermal decomposition producing which materials?
Answer:
nitrous oxide
Explanation:
5. A sample of pure acetyl salicylic acid had a mass of 0.268 grams. It was dissolved in NaOH and diluted to 500.00mL in a volumetric flask.
a. What is the concentration of aspirin in the solution?
b. If an 8.00mL sample of this solution was pipetted into a volumetric flask and diluted to 100.00mL, what is the concentrated of aspirin after this dilution?
Answer:
a. 5.36x10⁻⁴ g/mL
b. 4.29x10⁻⁵ g/mL
Explanation:
As the units for concentration are not specified, I'll respond using g/mL.
a. We divide the sample mass by the final volume in order to calculate the concentration:
0.268 g / 500 mL = 5.36x10⁻⁴ g/mLb. We can use C₁V₁=C₂V₂ for this question:
8.00 mL * 5.36x10⁻⁴ g/mL = C₂ * 100.00 mL C₂ = 4.29x10⁻⁵ g/mLthe sum of all potential and kinetic energies for all particles in the system is called what?
Answer:
mechanical energy
hope it helps and your day will be full of happiness
does Al3+ gain or loose electrons?
Answer:
gain
Explanation:
How much heat must be added to heat 0.750 g of water from 20.0 degrees * C to 40.0C (Remember, Q=C*m* Delta T) The specific heat of water is joule/gram.
D. 62.8 J
General Formulas and Concepts:Math
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to RightChemistry
Thermodynamics
Specific Heat Formula: q = mcΔT
q is heat (in joules)m is mass (in grams)c is specific heat (in J/g °C or J/g K)ΔT is change in temperature, final minus initial (°C or K)Explanation:Step 1: Define
[Given] m = 0.750 g
[Given] c = 4.186 J/g °C
[Given] ΔT = 40.0 °C - 20.0 °C = 20.0 °C
[Solve] q
Step 2: Solve
Substitute in variables [Specific Heat Formula]: q = (0.750 g)(4.186 J/g °C)(20.0 °C)[Heat] Multiply [Cancel out units]: q = 62.79 JStep 3: Check
Follow sig fig rules and round. We are given 3 sig figs.
62.79 J ≈ 62.8 J
NEED HELP ASAP FREE BRAINLIST
Answer:
7) C. Sodium
8) G. 1 valence electron
Explanation:
What is 17647.05882 rounded to 2 significant figures?
how are atoms an example of unity?
A. All atoms have the same arrangement of electrons.
B. All atoms react with other atoms the same way.
C. All atoms of one kind share common properties.
D. All atoms have the same number of neutrons.
Answer: C. All atoms of one kind share common properties.
Explanation:
_HNO3+ Fe+2
2+ H+ +_NO+ Fe+3+ H2O
What is the coefficient for water after the equation is balanced?
Answer: The coefficient for water after the equation is balanced is 2.
Explanation:
The balanced chemical equation must have same charge and same number of atoms on both sides of the equation.
As the given reaction is a redox recation occuring in acidic medium.
[tex]HNO_3+3Fe^{2+}+3H^+\rightarrow NO+3Fe^{3+}+2H_2O[/tex]
The coefficient for water will be 2 after the equation is balanced.
Which of the following is not part of the nucleus?
A. Ribosome
B. Chromosome
C. Nucleus
D. Gene
I believe the answer is Ribosome
what type of intermolecular interaction predominates in the following substances
Answer:
1. C
2. D
Explanation:
The blue colour of the sky results from the scattering of sunlight by air molecules. Blue light has a frequency if about 7.5*10^14Hz
Calculate the energy of a mole of photon associated with this frequency
Answer: The energy of a mole of photon associated with this frequency is [tex]49.5\times 10^{-20}J[/tex]
Explanation:
The energy and frequency are related by :
[tex]E=N\times h\times \nu[/tex]
E = energy of photon
N = number of moles = 1
h = planks constant = [tex]6.6\times 10^{-34}Js[/tex]
[tex]\nu[/tex] = frequency = [tex]7.5\times 10^{14}Hz[/tex]
[tex]E=1\times 6.6\times 10^{-34}Js\times 7.5\times 10^{14}s^{-1}=49.5\times 10^{-20}J[/tex]
The energy of a mole of photon associated with this frequency is [tex]49.5\times 10^{-20}J[/tex]
What is the reaction when you take hydrogen gas and oxygen gas to form liquid hydrogen peroxide
Answer:
Hydrogen gas (H2) and oxygen gas (O2) react to form liquid hydrogen peroxide (H2O2). The atoms of the reactants have combined to form a new substance. The new substance has its own set of properties that is different from the properties of each reactant.
Explanation:
Which type of material incorporates a variety of substances to enhance desired properties such as strength and flexibility?
Answer:
its a polymer
Explanation: