Al(NO3)3+H2SO4=HNO3+Al2(SO4)3

Answer:

1. Not to have enough salt water on the foil

2.not cleaning the foil well to remove interfering materials

Answer:

CaC₂  +  2H₂O  →  C₂H₂  + Ca(OH)₂

Explanation:

In order to find out the reaction, we must know the reactants.

For this situation, we make acetylene gas from carbide calcium CaC₂ and H₂O (water); therefore the reactants are:

- CaC₂  and  H₂O

Acetylene is one of the products made  →  C₂H₂

So the reaction can be formed as this:  CaC₂  +  H₂O  →  C₂H₂

We missed the calcium, and this reaction also makes, Calcium Hydroxide, so the complete equation must be:

CaC₂  +  H₂O  →  C₂H₂  + Ca(OH)₂

This is unbalanced, because we have 1 O in left side and 2 in right side so we add 2 in water so now, we get the complete reaction:

1 mol of calcium carbide reacts to 2 mol of water in order to produce 1 mol of acetylene and 1 mol of calcium hydroxide.

Answer:

The type of mixture whose components are seen through our naked eyes is known as heterogeneous mixture. it is a mixture of small constituent parts of substances.

for eg, mixture of sand and sugar.

hope it helps..

Answer:

The answer is option D.

Hope this helps you

Answer:

351.1g/mol

Explanation:

you can find the answer using The ideal gas equation

n= PV/RT

n=(1.21*1.9/0.082*301)mol

n=0.092 mol

molar mass=Mass/mole

m=32.3g/0.092mol

m=351.1g/mol

Answer:

1. It dissolves much more ice faster than sodium chloride

2. Calcium chloride is more effective in melting ice at lower temperatures.

Explanation:

Salts are used to melt ice on roadways and sidewalks because they help to lower the freezing point of water.

Sodium chloride and calcium chloride are both salts used for this purpose but calcium chloride is usually preferred for the following two reasons:

1. It dissolves much more ice faster than sodium chloride: Calcium chloride dissolves much more ice faster than sodium chloride because when it dissociates, it produces three ions instead of the two produced when sodium chloride. Therefore, the heat of hydration of its ions is greater than that of sodium chloride.

2. Calcium chloride is more effective in melting ice at lower temperatures. It lowers the freezing point of water more than sodium chloride. Calcium chloride is able to lower the freezing point of water to about -52°C while sodium chloride only lowers it to about -6°C.

Answer: CO2(g)+H2O(I) > H2CO3(Aq)

Explanation:

Got it right?

Answer:

You require 12.8mL of the 0.500M C₂H₃O₂Na and 7.2mL of the 0.500M C₂H₃O₂H

Explanation:

It is possible to obtain pH of a weak acid using H-H equation:

pH = pKa + log₁₀ [A⁻] / [HA]

For the buffer of acetic acid/acetate, the equation is:

pH = pKa + log₁₀ [C₂H₃O₂Na] / [C₂H₃O₂H]

Replacing:

5.00 = 4.75 + log₁₀ [C₂H₃O₂Na] / [C₂H₃O₂H]

1.7783 =  [C₂H₃O₂Na] / [C₂H₃O₂H] (1)

Buffer strength is the concentration of the buffer, that means:

0.1M = [C₂H₃O₂Na] + [C₂H₃O₂H] (2)

Replacing (2) in (1):

1.7783 =  0.1M - [C₂H₃O₂H] / [C₂H₃O₂H]

1.7783 [C₂H₃O₂H] = 0.1M -  [C₂H₃O₂H]

2.7783 [C₂H₃O₂H] = 0.1M

Also:

[C₂H₃O₂Na] = 0.1M - 0.036M

The moles of both compounds you require is:

[C₂H₃O₂Na] = 0.1L × (0.064mol / L) = 0.0064moles

[C₂H₃O₂H] = 0.1L × (0.036mol / L) = 0.0036moles

Your stock solutions are 0.500M, thus, volume of both solutions you require is:

[C₂H₃O₂Na] = 0.0064moles × (1L / 0.500M) = 0.0128L = 12.8mL

[C₂H₃O₂H] = 0.0036moles × (1L / 0.500M) = 0.0072mL = 7.2mL

Answer:

the same and 14

Explanation:

ed tell chem

Answer: the same 10

Explanation:

Answer:

2 CH₃OH  +  3 O₂  ⇒  2 CO₂  +  4 H₂O

Explanation:

Methanol is CH₃OH.  Oxygen is O₂.  A combustion produces CO₂ and H₂O.  Create an equation using this information and balance.

CH₃OH  +  O₂  ⇒  CO₂  +  H₂O

2 CH₃OH  +  3 O₂  ⇒  2 CO₂  +  4 H₂O

The balanced equation for the combustion of liquid methanol in air, assuming H2O(g) as a product is

CH₃OH(l) + O₂(g) → CO₂(g) + H₂O(g)

From the question,

We are to write a balanced equation for the combustion of liquid methanol in air.

The combustion of liquid methanol in air is the reaction between methanol (CH₃OH) and oxygen (O₂). The reaction yields carbon(IV) oxide and water.

Now, for the balanced equation for the combustion of liquid methanol in air

The balanced chemical equation is

CH₃OH(l) + O₂(g) → CO₂(g) + H₂O(g)

Hence, the balanced equation for the combustion of liquid methanol in air, assuming H2O(g) as a product is CH₃OH(l) + O₂(g) → CO₂(g) + H₂O(g)

Learn more here: https://brainly.com/question/2473060

Answer:

Oxygen present in food items makes then rancid due to the presence of oils and fats. If the food is flushed with nitrogen, it prevents it from being oxidised (the nitrogen acts as an antioxidant).

Hope it helps ! :)

Answer:

198.56g of GaCl3

Explanation:

We'll begin by calculating the number of mole HCl in 2.25 L of a 1.50 M solution of HCl. This is illustrated below:

Molarity of HCl = 1.50 M

Volume = 2.25 L

Mole of HCl =..?

Molarity = mole /Volume

1.5 = mole /2.25

Cross multiply

Mole = 1.5 x 2.25

Mole of HCl = 3.375 mole

Next, we shall determine the number of mole Gallium chloride, GaCl3 produced from the reaction. This is shown below:

2Ga + 6HCl —> 2GaCl3 + 3H2

From the balanced equation above,

6 moles of HCl reacted to produce 2 moles of GaCl3.

Therefore, 3.375 mole of HCl will react to produce = (3.375 x 2)/6 = 1.125 mole of GaCl3.

Therefore, 1.125 moles of GaCl3 were produced from the reaction.

Next, we shall convert 1.125 mole of GaCl3 to grams. This is illustrated below:

Molar mass of GaCl3 = 70 + (35.5x3) = 176.5g/mol

Mole of GaCl3 = 1.125 mole

Mass of GaCl3 =..?

Mole = mass /Molar mass

1.125 = mass of GaCl3 /176.5

Cross multiply

Mass of GaCl3 = 1.125 x 176.5

Mass of GaCl3 = 198.56g

Therefore, 198.56g of GaCl3 were produced from the reaction.

Answer:

95.7 g CO to the nearest tenth.

Explanation:

2C + O2 ---> 2CO

Using relative atomic masses:

24 g C produces  2*12 + 2*16 g CO.

So 41 g produces  ( (2*12 + 2*16) * 41  ) / 24

= 95.7 g CO,

Answer:

THE MASS OF 7.68 *10^24 MOLECULES OF PHOSPHORUS TRICHLORIDE IS 1746.25 g.

Explanation:

Molar mass of PCl3 = ( 31 + 35.5 *3) = 137.5 g/mol

At 7.68 * 10^24 molecules, how many number of mole is present?

6.03 * 10^23 molecules = 1 mole

7.68*10^24 molecules = x mole

x mole = 7.68 *10^24 molecules/ 6.03 *10^23

x mole = 1.27 *10 moles

x mole = 12.7 moles

Using mole = mass / molar mass

mass = mole * molar mass

mass = 12.7 moles * 137.5 g/mol

mass = 1746.25 g

Hence, the mass of 7.68 *10^24 molecules is 1746.25 g

Answer:

C. the evolution of building techniques

Hope this helps.

Answer:

A. Partial pressure of krypton, Kr is 346.97 mmHg

B. Partial pressure of nitrogen, N2 is 364.03 mmHg.

Explanation:

Step 1:

Data obtained from the question. This include the following:

Total pressure (Pt) = 711 mmHg

Mass of Kr = 11.7 g

Mass of N2 = 4.10 g

Partial pressure of Kr =..?

Partial pressure of N2 =...?

Step 2:

Determination of the number of mole of krypton, Kr and nitrogen, N2. This is illustrated below:

Molar mass of Kr = 84g/mol

Mass of Kr = 11.7g

Mole of Kr =?

Mole = mass /Molar mass

Mole of Kr = 11.7/84 = 0.139 mole

Molar mass of N2 = 2x14 = 28g/mol

Mass of N2 = 4.10g

Mole of N2 =?

Mole = mass /Molar mass

Mole of N2 = 4.1/28 = 0.146 mole

Step 3:

Determination of the mole fraction for each gas. This is illustrated below:

Mole of Kr = 0.139 mole

Mole of N2 = 0.146 mole

Total mole = 0.139 + 0.146 = 0.285 mole

Mole fraction of Kr = mol of Kr/total mol

Mole fraction of Kr = 0.139/0.285

Mole fraction of Kr = 0.488

Mole fraction of N2 = mol of N2/total mol

Mole fraction of N2 = 0.146/0.285

Mole fraction of N2 = 0.512

A. Determination of the partial pressure of krypton, Kr.

This is illustrated below:

Total pressure (Pt) = 711 mmHg

Mole fraction of Kr = 0.488

Partial pressure of Kr =..?

Partial pressure = mole fraction x total pressure

Partial pressure of Kr = 0.488 x 711

Partial pressure of Kr = 346.97 mmHg

B. Determination of the partial pressure of nitrogen, N2

This is illustrated below:

Total pressure (Pt) = 711 mmHg

Mole fraction of N2 = 0.512

Partial pressure of N2 =?

Partial pressure = mole fraction x total pressure

Partial pressure of N2 = 0.512 x 711

Partial pressure of N2 = 364.03 mmHg

Answer:

322

Explanation:

This is easy

Answer:

B

Explanation:

All the elements in a period have valence electrons in the same shell. The number of valence electrons increases from left to right in the period. When the shell is full, a new row is started and the process repeats.

A new period starts when a new neutron cycle starts. Hence, option B is correct.

A period in the periodic table is a row of chemical elements. All elements in a row have the same number of electron shells.

All the elements in a period have valence electrons in the same shell.

The number of valence electrons increases from left to right in the period.

When the shell is full, a new row is started and the process repeats.

Hence, option B is correct.

Learn more about the period in the periodic table here:

https://brainly.com/question/3433177

#SPJ2

https://brainly.com/question/16061498?referrer=searchResults

Answer:

0.76 M

30 g/L

Explanation:

Step 1: Given data

Step 2: Calculate the molarity of the base

We will use the following expression.

[tex]Ma \times Va = Mb \times Vb\\Mb = \frac{Ma \times Va}{Vb} = \frac{0.175M \times 375mL}{86mL} = 0.76 M[/tex]

Step 3: Calculate the concentration of the base in g/L

The molar mass of NaOH is 40.00 g/mol.

[tex]\frac{0.76mol}{L} \times \frac{40.00g}{mol} = 30 g/L[/tex]

Answer: The solubility of gas increases in a solution if the pressure above the solution is increased

Explanation:

Henry's law states that the amount of gas dissolved or molar solubility of gas is directly proportional to the partial pressure of the liquid.

To calculate the molar solubility, we use the equation given by Henry's law, which is:

[tex]C=K_H\times p[/tex]

where,

C = solubility

[tex]K_H[/tex] = Henry's constant

p = partial pressure

As the solubility is directly proportional to the pressure, thus increasing the pressure increases the solubility.

Answer:

lithium is akali metal

Answer:

lithium is an alkali metal as it lies in group 1st in modern perodic table.

Answer:

[tex]0.688M[/tex]

Explanation:

Hello,

In this case, it is widely acknowledged that strong bases usually correspond to those formed with metals in groups IA and IIA which have relatively high activity and reactivity, therefore, when they are dissolved in water the following dissociation reaction occurs (for calcium hydroxide):

[tex]Ca(OH)_2\rightarrow Ca^{2+}+2OH^-[/tex]

In such a way, for the same volume, we can compute the concentration of hydroxyl ions by simple stoichiometry (1:2 molar ratio):

[tex]0.344\frac{molCa(OH)_2}{L}*\frac{2molOH^-}{1molCa(OH)_2} \\\\0.688\frac{mol OH^-}{L}[/tex]

Or simply:

[tex]0.688M[/tex]

Regards.

Answer:

2 PbS(s) + 1.5 O₂(g) + PbO(s) ⇒ 2 SO₂(g) + 3 Pb(s)

Explanation:

Lead can be prepared from galena [lead(II) sulfide] by first heating with oxygen to form lead(II) oxide and sulfur dioxide. The corresponding chemical equation is:

PbS(s) + 1.5 O₂(g) ⇒ PbO(s) + SO₂(g)

Heating the metal oxide with more galena forms the metal and more sulfur dioxide. The corresponding chemical equation is:

2 PbO(s) + PbS(s) ⇒ 3 Pb(s) + SO₂(g)

We can get the overall reaction by adding both steps and canceling what is repeated on both sides.

2 PbS(s) + 1.5 O₂(g) + 2 PbO(s) ⇒ PbO(s) + 2 SO₂(g) + 3 Pb(s)

2 PbS(s) + 1.5 O₂(g) + PbO(s) ⇒ 2 SO₂(g) + 3 Pb(s)

Answer:

2415.9g (corrected to 1 d.p.)

Explanation:

(Take the atomic mass of Ga=69.7 and S=32.1)

Assuming Ga is the limiting reagent (because the question did not mention the amount of sulphur burnt),

From the balanced equation, the mole ratio of Ga:Ga2S3 = 4: 2 = 2: 1, which means, every 2 moles of Ga burnt, 1 mole of Ga2S3 is produced.

Using this ratio, let y be the no. of moles of Ga2S3 produced,

[tex]\frac{2}{1} =\frac{20.5}{y}[/tex]

y = 20.5 / 2

= 10.25 mol

Since mass = no. of moles x molar mass,

the mass of Ga2S3 produced = 10.25 x (69.7x2 + 32.1x3)

= 2415.9g (corrected to 1 d.p.)

Answer:

Alcl3 and Cl2

Explanation:

the product above will be formed

Answer:

silver (Ag) and aluminum chloride (AlCl₃)

Explanation:

The reaction between aluminum and silver chloride is a single replacement reaction. A single replacement reaction is when one element switches places with another.

Al + 3AgCl ➔︎ 3Ag + AlCl₃

In the reaction, the cations (positively charged ions) switch places. Aluminum (Al) switches places with Silver (Ag). So, the products of the reaction are silver and aluminum chloride.

Hope this helps.

Answer:

#1

Explanation:

molarity of EDTA solution 0.0675

no1

Answer:

#1: 0.00144 mmolHCl/mg Sample

#2: 0.00155 mmolHCl/mg Sample

#3: 0.00153 mmolHCl/mg Sample

Explanation:

A antiacid (weak base) will react with the HCl thus:

Antiacid + HCl → Water + Salt.

In the titration of antiacid, the strong acid (HCl)  is added in excess, and you're titrating with NaOH moles of HCl that doesn't react.

Moles that react are the difference between mmoles of HCl - mmoles NaOH added (mmoles are Molarity×mL added). Thus:

Trial 1: 0.391M×14.00mL - 0.0962M×34.26mL = 2.178 mmoles HCl

Trial 2: 0.391M×14.00mL - 0.0962M×33.48mL = 2.253 mmoles HCl

Trial 3: 0.391M×14.00mL - 0.0962M×33.84mL = 2.219 mmoles HCl

The mass of tablet in mg in the 3 experiments is 1515mg, 1452mg and 1443mg.

Thus, mmoles HCl /mg OF SAMPLE for each trial is:

#1: 2.178mmol / 1515mg

#2: 2.253mmol / 1452mg

#3: 2.219mmol / 1443mg

Answer:

J

Explanation:

Answer:

E 1: cyclohexene

Explanation:

This reaction is an example of the dehydration of cyclic alcohols. The reaction proceeds in the following steps;

1) The first step of the process is the protonation of the cyclohexanol by the acid. This now yields H2O^+ attached to the cyclohexane ring.

2) the water molecule, which a good leaving group now leaves yielding a carbocation. This now leaves a cyclohexane carbocation which is highly reactive.

3) A water molecule now abstracts a proton from the carbon adjacent to the carbocation leading to the formation of cyclohexene and the regeneration of the acid catalyst. This is an E1 mechanism because it proceeds via a carbocation intermediate and not a concerted transition state, hence the answer.

Answer:

none of these statements is true

according to the question E) None of these statements is true.

The concentration of a chemical substance expresses the amount of a substance present in a mixture. There are many different ways to express concentration. Chemists use the term solute to describe the substance of interest and the term solvent to describe the material in which the solute is dissolved

Quantitative units of concentration include molarity, molality, mass percentage, parts per thousand, parts per million, and parts per billion.

Learn more about concentration here

https://brainly.com/question/24595796

#SPJ2