Adding NH3 to the stack gases at an electric power
generating plant can reduce NOx emissions. This
selective noncatalytic reduction (SNR) process depends on the
reaction between NH2 (an odd-electron compound) and
NO.
NH2 + NO --> N2 + H2O
The following kinetic data were collected at 1200 K.

Answers

Answer 1

Rate constant of reaction at 1200 K : 1.20 times 10 9 M -1 s -1

What is Rate of Reaction?

The rate of reaction in a chemical reaction is the speed at which the products are formed from the reactants. It helps us comprehend how rapidly a reaction might happen. For instance, cellulose burns exceedingly quickly in fire and the process is complete in less than a second.

The rate of reaction, also known as reaction rate, is the rate at which reactants transform into products. It should go without saying that different chemical reactions occur at different rates. While certain chemical reactions take place extremely immediately, others usually take some time to reach their final equilibrium.

Rate of reaction = k [NH 3] x [NO] y, where k is the reaction's rate constant, x is the order of the reaction with respect to NH 3, and y is the order of the reaction with respect to NO

Rate of reaction = k [NH 3 ] [ NO ]  

Rate constant of reaction at 1200 K : 1.20 times 10 9 M -1 s -1

Learn more about Rate of Reaction from given link

https://brainly.com/question/12904152

#SPJ4


Related Questions

After completion of the citric acid cycle, most of the usable energy from the original glucose molecule is in the form of __________.
A. acetyl CoA
B. ATP
C. CO2
D. FADH2
E. NADH

Answers

After completion of the citric acid cycle, most of the usable energy from the original glucose molecule is in the form of B. ATP

The most basic kind of sugar, monosaccharides only have one kind of sugar molecule. The simplest sugar is glucose, which is also your body's primary energy source. In tests to determine blood sugar levels, sugar is measured. Fructose and galactose, two more monosaccharides, are converted into glucose via metabolism ( 1 , 2 ). For instance, ATP is necessary for both breathing and keeping your heart beating. As well as assisting in the synthesis of lipids and nerve impulses, ATP also facilitates the entry and exit of certain molecules from cells. Even some living things, including bioluminescent creatures like jellyfish and fireflies, use ATP to create light!

Learn more abut ATP here:

https://brainly.com/question/14637256

#SPJ4

According to the collision model, why does increasing the temperature increase the rate of a reaction?.

Answers

As temperature rises, more collisions with sufficient energy can take place, triggering the reaction due to increase in the kinetic energy. This concept is predicted by Collission theory. Collision theory helps scientists predict the rate of various chemical reactions. Collision theory helps scientists predict the rate of various chemical reactions. According to this theory, the number of successful collisions is related to the speed or rate of the chemical reaction

What is collision model?

The collision model states that a chemical reaction can only happen when reactant molecules, atoms, or ions meet with enough kinetic energy and in the right direction.

The main requirement for a collision model is that for a reaction to occur, the reactant particles (atoms or molecules) must collide and interact with each other in some way. This idea is used to explain many of the observations made about chemical kinetics.

To know more about collision model, check out https://brainly.com/question/1409456

#SPJ4

where does the ring oxygen come from when converting a fisher projection for an aldehyde into a haworth structure?

Answers

The O from carbon 5 becomes the O in the ring when converting a fisher projection for an aldehyde into a haworth structure.

Once you know a few strategies, changing a Fischer projection to a Haworth projection is not too difficult.

If the OH is on the right side of the Fischer for C-2, C-3, and C-4, it will be lower in the Haworth. If it is on the Fischer's left side, it will be higher up in the Haworth.

Draw the C-5 CH₂OH pointing up if the sugar is D.

Draw the C-1 OH pointing downward for the alpha for D-sugars (and up for the beta)

To further understand the stereochemistry on the ring, a bond rotation on the C5 carbon is helpful. A bond rotation is accomplished by switching any three groups on a carbon. We'll therefore do the following three "moves":

H → OH

CH₂OH, OH

CH₂OH→ H

The C5-OH is no longer pointing downward after rotation; it is now to the side. Because of the tetrahedral structure of the carbon, I depicted the bond in the picture below as "dashed." I further dashed the C2-C1 bond.

This gives us the opportunity to depict the C5-OH attacking the carbonyl carbon and rupturing the C1-O pi link to generate a new O-C1 single bond.

We now have one of two rings after proton transfer, which we can represent as Haworth projections.

Hence, The O from carbon 5 becomes the O in the ring.

To learn more about Fischer projection refer- https://brainly.com/question/16906404

#SPJ4

Is the following statement TRUE or FALSE? The major organic of the following reaction is optically active. 1. BH 3. THE 2. H2O2, NaOH O True O False

Answers

True : The major organic of the following reaction is optically active. 1. BH 3. THF 2. H2O2 4.NaOH .

What is Optically active compound?

The compounds which have the property to move(rotate) the plane of polarization of plane polarized lights is termed as Optically active compound. The compound that rotate the plane clockwise (to the right) are termed as dextrorotatory.

What is Plane of polarization?

Plane of polarization indicates to the direction in which linearly polarized lights are polarized.

Hence, True : The major organic of the following reaction is optically active. 1. BH 3. THF 2. H2O2 4.NaOH .

To know more about Optically active visit

https://brainly.com/question/15892094

#SPJ4

Can someone help me? If you pass an electric current through an iron nail, you will create an electromagnet. This magnet will pick up small objects, thus demonstrating that electrical energy can be converted into mechanical energy. Is there a way to use this principle to create a motor?

Answers

Only when an electric current is running through the coil of insulated wire that is wrapped around the iron nail will it behave like a magnet. The iron nail loses its magnetism when the electric current in the coil is stopped.

What is electric current ?

An electric current is a stream of charged particles, such as electrons or ions, moving through an electrical conductor or space. It is measured as the net rate of flow of electric charge through a surface or into a control volume.

An electromagnet is a magnet that consists of a piece of steel or iron encircled by a coil. When an electric current is run through the coil, the metal turns magnetic.

Thus,  The iron nail loses its magnetism when the electric current in the coil is stopped.

To learn more about electric current, follow the link;

https://brainly.com/question/2264542

#SPJ1

How much energy does it take to melt 50g of ice at 0°C?

Answers

Answer:

How much energy does it take to melt 50g of ice at 0°C?

The amount of energy required to melt 50g of ice at 0°C is approximately 334 Joules.

Volume of the unknown AgNO3 solution =52.500 mL Mass of AgCl (s) 0.0143321 g (initial) 0.214981 g (final) Mole of AgCl = 0.00149999 Calculate mole and mass of AgNO3 in the 10 mL unknown solution based on the following reaction equation: NaCllaq) AgNO3aq) NaNO3aq) AgCl(s) Mole of AgNO3 in the 10 mL unknown solution Mass of AgNO3 in the 10 mL unknown solution Calculate mass of AgNO3 in the original unknown solution based on its volume Mass of AgNO3 in the original unknown solution Post Lab Assignments 1.A gravimetric analysis is done with an unknown sample containing MgSO4. A 0.5020-g solid mixture is dissolved in water and treated with an excess of Ba(NO3)2, resulting in the precipitation of 0.6168 g of BaS04 MgSO4(aq)+Ba(NO3)2(aq) _BaSO4(s)+Mg(NO3)2(a What is the mass of MgSO4 in the mixture?

Answers

The mass of AgNO₃ in 52.50g of the solution is 1.2485g.

NaCl + AgNO₃ = AgCl + NaNO₃

(10ml unknown)

Initial moles of AgCl

Mass/Molar mass

= 0.01433219/143.32 g/mol

= 1x 10⁻⁴ mol

Initial final moles of AgCl = 0.2149819/143.32 g/mol

= 1.5X 10⁻³ mol

So, Moles of AgCl are obtained by the reaction.

= 1.5×10⁻³ - 1x10⁻⁴

= 1.4 X 10⁻³ mol

from reacting stoichiometry

Moles of AgCl = Moles of AgNO₃

So, Moles of AgNO₃ in the 10ml of unknown solution = Moles of AgCl formed

= 1.4 x 10⁻³ mol

Mass of AgNO₃ in 10ml of an unknown solution

= Moles X Molar mass

= 1.4x 10⁻³ mol X 169.87 g/mol

= 0.237828g

= 0.247g

To learn more about moles and molar mass,

https://brainly.com/question/26416088

#SPJ4

equal volumes of equimolar aqueous solutions of sodium sulfite and hydroiodic acid are mixed. what net ionic equation describes this system ?

Answers

Na₂S₂O₃(aq) + 2HCl(aq) → 2NaCl(aq) + H₂O(l) + SO₂(g) + S(s). A light yellow precipitate develops as the process continues.

What does the chemistry term "equation" mean?

Reaction equation are symbolic depictions of chemical reactions where the reactants and products are stated in relation to the following chemical formulae.

Equation and response are what?

What is an equations and a chemical reaction? In a chemical change, bonds between molecules of the reagent are destroyed and new bonds between molecules of the product are established to create a new substance. A chemical formula is nothing more than a statement of fact that represents how reactants generate products.

To know more about Equation visit:

https://brainly.com/question/28818520

#SPJ4

a sample of gas at is collected above water. the atmospheric pressure that day istorr. what is the partial pressure of the dry gas in mmhg?

Answers

The partial pressure of the dry gas is  739.3 mmhg.

Dalton's law of partial pressure states that the total pressure equals to the sum of partial pressure of individual gases

PTotal = PH2 + PWater

Hence it is common that the pressure of hydrogen gas is less because we have also account pressure due to vapor pressure of water. In some cases we will also include partial pressure correction term, so that

PTotal = PH2 + PWater becomes

PTotal = PH2 + PWater + Pcorrection

At 21 ^0C water vapor pressure = 18.7 torr

PTotal = PH2 + PWater

758 torr = PH2 + 18.7 torr

PH2 = 758 - 18.7 = 739.3 torr

PH2 = 739.3 mmhg

To learn more about pressure  visit:https://brainly.com/question/12971272

#SPJ4

a reaction is half complete after 20 minutes. after 40 minutes, the reaction is twothirds complete. when will the reaction be 90% complete?

Answers

A reaction is half complete after 20 minutes. after 40 minutes, the reaction is two thirds complete.  the reaction be 90% complete is 180 minutes.

the half life expression is given as :

1 / [A] = 1 / [A]o + kt

[A] is the concentration of reactant at time t. The starting reactant concentration is 1 M.

t1/2 = 1 / k[A]o

20 min = 1 / k(1)

k = 0.050 min

1 / [A] = 1 / [A]o + kt

1 / [A] = 1 / 1 + ( 0.050 × 40 min)

[A] = 0.33 M

this means the reaction is two third complete. when the reaction is 90 % and [A] = 0.100 M. then,

1 / [A] = 1 / [A]o + kt

1 / 0.100 M = 1 / 1 + ( 0.050 ) t

t = 9 / 0.050

t = 180 min

Thus the time is 180 min.

To learn more about half life here

https://brainly.com/question/24710827

#SPJ4

Metal carbonyls, which have the general formula M(CO)x (x can be various possible subscripts depending on the particular metal used), are important intermediates in the purification and reactivity of transition metals. Consider the following synthesis of an unknown metal carbonyl, with the indicated equilibrium constant. M (s) + x CO (g) --> M(CO)x (g) Kp = 0.133 If you add an unknown amount of the metal and carbon monoxide gas to an empty reaction flask, and at equilibrium the pressure of carbon monoxide is 2.28 atm and metal carbonyl is 7.80 atm, what was the initial pressure of carbon monoxide that you added?

Answers

Metal carbonyls are characterized as volatile, low-melting-point compounds. They are created from the compound Mx(Co)y, which upon heating breaks down into metal and carbon monoxide. Contact with the skin can make them toxic.

In some cases, such as in nickel tetracarbonyl (Ni(CO)4), these complexes are homoleptic and only contain CO ligands, but more frequently, metal carbonyls are heteroleptic and contain a variety of ligands. Mononuclear metal carbonyls have a single metal atom at their core.

Learn more about the  Mononuclear

brainly.com/question/28304567

#SPJ4

remediation of indoor air pollution problems involve modifications of box model parameters that result in concentration reductions. for example, reduction of the source rate directly reduces concentration. what do ventilation and the use of air cleaners have in common with respect to the box model?

Answers

They both reduce the residence time of pollutants ventilation and the use of air cleaners have in common with respect to the box model.

Any chemical or energy that is put into the environment and has unintended effects or negatively impacts the use of a resource is considered a pollutant or new entity. These can be created either naturally (such as minerals or extracted chemicals like oil) or artificially (due to human activity) (i.e. manufactured materials or byproducts from biodegradation). When pollutants are present at levels that have a major negative influence on the environment or public health, they become pollutants.

By altering the rate of animal or plant species' growth, or by affecting people's amenities, comfort, health, or property values, a pollution may cause long-term or short-term damage. Because they biodegrade, some contaminants won't last very long in the environment.

Learn more about pollutants here:

https://brainly.com/question/1578728

#SPJ4

draw two lewis structures (one of which contains only single bonds) for the phosphate ion, po43–. which is the more important structure according to formal charge rules? multiple choice question. the more important structure contains a double bond, resulting in a formal charge of zero on p, 0 on the doubly bonded o, and –1 on other o atoms. the more important structure contains a double bond, resulting in a formal charge of zero on p, –1 on the doubly bonded o, and 0 on other o atoms. the more important structure contains all single bonds, resulting in a formal charge of 1 on p, and –1 on the o atoms. the more important structure contains all single bonds, resulting in a formal charge of 0 on p, and –1 on the o atoms.

Answers

Extra crucial systems incorporate a double bond, ensuing in a formal price of 0 on P, zero at the double-bonded O, and -1 on different O atoms.

Bond length or bond distance is defined due to the common distance among nuclei of bonded atoms in a molecule. it's miles a transferable belonging of a bond between atoms of consistent kinds, surprisingly independent of the relaxation of the molecule.

The bond period is defined due to the equilibrium distance between the nuclei of bonded atoms in a molecule. the larger the size of the atom, the longer the bond duration.

The longest bond is considered to be a carbon-carbon bond, found in diamonds. Its length is 154 pm. The carbon atoms bonded via covalent bonds.

Learn more about Bond length here:-brainly.com/question/20910787

#SPJ4

Voice-over artists lend their voices to movie trailers, animated films, and commercials. Voice-overs are typically recorded in small studios, like the one shown in the photograph, where acoustic foam covers the walls. The porous foam is designed with an irregular surface.

6. Using your knowledge of the reflection, absorption, and transmission of mechanical waves, Why do you think the foam is used, and how do you think it functions?

Answers

in the photograph, where acoustic foam covers the walls. The porous foam is designed with an irregular surface and the reason for the use of foam such as acoustic foam is that Smaller, quieter offices might only need a few installations, while more hectic environments might call for a whole acoustic paneling system.

What does foaming provide as a means of?

A group of small bubbles known as foam are produced by foaming chemicals. To generate foam, though, you also need water and air. The real function of foam is to prolong the time that a filthy surface is in touch with it, giving wetting agents, detergents, and degreasers time to work.

Therefore, note that acoustic panel is a sound-absorbing panel used to lessen echo and reverberation in a space as well as background noise. We use the term "acoustic panel" in the broadest sense possible, which includes both vertical and horizontal panels.

Learn more about foam from

https://brainly.com/question/18725179
#SPJ1

a mixture of neon and helium gases, at a total pressure of 798 mm hg, contains 3.93 grams of neon and 0.228 grams of helium. what is the partial pressure of each gas in the mixture?

Answers

A mixture of neon and helium gases, at a total pressure of 798 mm hg, contains 3.93 grams of neon and 0.228 grams of helium. the partial pressure of each gas in the mixture is neon = 6146.46 mmHg and helium = 175.56 mmHg.

given that :

total pressure = 798 mmHg

mass of neon = 3.93 g

mass of helium = 0.228 g

moles of neon = mass / molar mass

                        = 3.93 / 20

                        =0.196 mol

moles of helium = 0.228 / 4 = 0.057 mol

total moles = 0.253

mole fraction of neon = 0.196 / 0.253

                                    = 0.77

mole fraction of helium = 0.057 / 0.253 = 0.22

the partial pressure of neon = mole fraction × total pressure

                                              = 0.77  × 798

                                              = 614.46 mmHg

the partial pressure of the helium =  mole fraction × total pressure

                                                        = 0.22 × 798

                                                        = 175.56 mmHg

To learn more about partial pressure here

https://brainly.com/question/29309951

#SPJ4

for each half-reaction, which is a correct equation for an oxidation reaction? al(s) ---> al3 (aq) 3 e- na (aq) ---> na(s) e-

Answers

Al metal is converted into an aluminum ion with an oxidation number of +3, and hydrogen in water or KOH is reduced from an oxidation number of +1 to zero in hydrogen gas.

Aluminum is reduced as a result of an increase in electrons due to a decrease in the oxidation number. 4. Cu0 is the oxidized reducing agent, and Al3+ is the oxidizing agent. The Half-Reaction approach is one technique for balancing redox reactions.

Learn more about aluminum,

https://brainly.com/question/12751230

#SPJ4

what volume (in ml) of water must you add to 50.0 ml of a 0.600 m libr solution to produce a 0.145 m solution? assume the volumes are additive.

Answers

The formula MaVa=MbVb is used in this dilution problem. The initial 50.00 mL solution needs to be diluted from 0.600 M to 0.145 M by the addition of 0.597 mL.

How to solve?

The formula MaVa=MbVb is used

Ma=0.600M

Va=50.00ml

Mb=0.145M

Vb=(50.00+Xml)

MaVa=MbVb

(0.600)(50.00)=(0.145)(50.00+X)

30.00-0.145=(50.00+X)

29.85/50.00=X

X=0.597 ml

When a solution is diluted, which of the following remains constant?

When a solution is diluted, which of the following remains constant? Dilution has no effect on the solute concentration in a solution. The moles of the solute do not change when a solvent is added to a solution, but the concentration of the solution (in molarity and in all other units) and its volume do.

How do you dilute a solution's concentration?

Taking a solution of higher concentration and gradually adding water until the desired concentration is obtained is a typical technique for creating a solution of a specific concentration. This process is called dilution.

Learn more about concentration  here:

https://brainly.com/question/27548802

#SPJ4

list all possible downward transitions for an electron in the 3d state. remember the selection rules!

Answers

All possible downward transitions for an electron in the 3d state are 1s 2s 2p 3s and 3p

In chemistry, the transition state of a chemical reaction is a particular configuration along the reaction coordinate. It is usually defined as the state corresponding to the highest potential energy along this reaction coordinate. It is often marked with the double dagger

In an atom, electrons can transition up or down depending on whether they absorb energy or emit energy. Electrons naturally want to be in the lowest possible energy state.

In an atom, electrons can transition up or down depending on whether they absorb energy or emit energy. Electrons naturally want to be in the lowest possible energy state.

Downward transitions would be possible to any lower energy level than the one the electron starts in, so all possible downward transitions for an electron in the 3d state are 1s 2s 2p 3s and 3p.

To know more about downward transitions

https://brainly.com/question/17998935

#SPJ4

Which of the following is a paleoclimate proxy? O A Written temperature records from the summer of 1863 OB Measurements of fossilized tree rings from the Cretaceous period O c A database of satellite temperature data, from 1970 through present © D All of the above

Answers

Option B is correct which is Measurements of fossilized tree rings from the Cretaceous period is a paleoclimate proxy.

The study of past climates ("paleoclimatology"), climate proxies are preserved physical characteristics of the past that stand in for direct meteorological measurements and enable scientists to reconstruct the climatic conditions over a longer fraction of the Earth's history. Reliable global records of climate only began in the 1880s, and proxies provide the only means for scientists to determine climatic patterns before record-keeping began.

A large number of climate proxies have been studied from a variety of geologic contexts. Examples of proxies include stable isotope measurements from ice cores, growth rates in tree rings, species composition of sub-fossil pollen in lake sediment or foraminifera in ocean sediments, temperature profiles of boreholes, and stable isotopes and mineralogy of corals and carbonate speleothems.

Proxies can be combined to produce temperature reconstructions longer than the instrumental temperature record and can inform discussions of global warming and climate history. The geographic distribution of proxy records, just like the instrumental record, is not at all uniform, with more records in the northern hemisphere.[3]

To know more about  Climate proxy : https://brainly.com/question/23529208?referrer=searchResults

#SPJ4

if the sample of chips used to make the filtrate weighed 75.5 kg , how much nacl nacl is present in one serving (155 gg ) of chips?

Answers

The amount of table salt in one serving or 155g of chips is 0.608g if the sample of chips used to make the filtrate weighed 75.5 kg.

By undergoing titration by Mohr's method with AgNO₃ and KCl, The chemical reaction is given by,

AgNO3(aq) + NaCl(aq) --> AgCl(s) + NaNO3(aq)

No moles of KCI are given by W/G.M.Wt

= 0.5/74.55

= 0.006707 moles of KCI

Then, from the reaction,

no of moles of KCI = no of moles of AgNO₃

Therefore,

molarity of AgNO₃ = no of moles/volume in L

= 0.006707/0.0625

= 0.107312M

47.2 ml of AgNO₃ solution to precipitate all of the chlorides.

Then, no of moles of Cl⁻ = molarity x volume in L

On substituting,

= 0.107312*0.0472

= 0.005065 moles

no of moles of Cl⁻ = no of moles of NaCl

mass of NaCl = no of moles of NaCl x gram molar mass of NaCl

 = 0.005065 x 58.5

 = 0.2963g of NaCl

155/75.5. = 2.05298013 chips

2.05298013x 0.2963 = 0.608298013 g

Therefore, 0.608g of NaCl is in 115g of chips.

To know more about food chemistry, click below:

https://brainly.com/question/29517724

#SPJ4

Which gas law can be used to calculate the pressure of hydrogen gas collected over water.

Answers

The overall pressure inside the container must equal the amount of the pressure of the gas we collected as well as the water vapor, according to Dalton's Law of Partial Pressures.

What is hydrogen gas?

Hydrogen, a clean fuel, can replace methane, generally known as natural gas. It is expected to make up around 75% of the known universe mass and is the most common chemical element. Hydrogen atoms are abundant in waters, plants, animals, including, of course, human beings on this planet. The letters H and atomic number 1 stand for the chemical element hydrogen. Hydrogen is the lightest element. Hydrogen is typically a gas with the formula H2 composed of diatomic molecules. It is extremely flammable, non-toxic, tasteless, colorless, and odorless.

How is hydrogen gas made and its uses?

High-Temperature Water Splitting: Chemical reactions that split water into hydrogen are fueled by high temperatures produced by solar concentrators or nuclear reactors. Photobiological Water Splitting: When water is consumed by microbes like green algae in the presence of sunshine, hydrogen is produced as a byproduct.

Fuel cells may produce energy, power, and heat using hydrogen. The two industries where hydrogen is currently most widely employed are fertilizer manufacturing and petroleum refining, with the developing markets of utilities and transportation.

To know more about Hydrogen Gas visit:

https://brainly.com/question/12494649

#SPJ4

if 42.6 ml of a 0.140 m koh solution is required to titrate 20.0 ml of a h2so4 solution, what is the molarity of the h2so4 solution

Answers

The molarity of the h2so4 solution is 0.149mol/l.

What is molarity?

The number of moles of solute per liter of solution is known as molarity or molar concentration. It is calculated by dividing the number of moles of solute by the total volume of liters of solution.

What is titration?

Titration is the steady addition of a known concentration solution (called a titrant) to a known volume of an unknown concentration solution until the reaction approaches neutrality, which is sometimes signaled by a color change.

According to the question,

2 KOH + H2SO4   →    K2SO4 + 2 H2O

No. moles [tex]NaOH[/tex] = [tex]\frac{42.6 * 0.14}{1000}[/tex][tex]\frac{42.6 * 0.14}{1000}[/tex] = [tex]5.96 * 10^-^3[/tex]

From the equation we can see that the no. moles of [tex]H_2SO_4[/tex] must be half that amount so:

No. of moles [tex]H_2SO_4[/tex] = [tex]5.96 * 10^-^3[/tex] / 2 = [tex]2.98 * 10^-^3[/tex]

[tex]c = \frac{n}{v}[/tex] So,

[tex][H_2SO_4][/tex] = [tex]\frac{2.98 * 10^-^3}{20 * 10^-^3}[/tex] = 0.149mol/l

The molarity of the h2so4 solution is 0.149mol/l.

To know more about molarity, check out:

https://brainly.com/question/26528084

#SPJ4

Compared to the particles in a hardened lava sample the particles in a liquid lava sample.

Answers

Compared to the particles in a hardened lava sample the particles in a liquid lava sample are moving faster.

Lava is a mixture of the elements silicon, oxygen, aluminum, iron, magnesium, calcium, sodium, potassium, phosphorus, and titanium, as well as other elements in very minute amounts. Consider reading the background material in Minerals, Magma, and Volcanic Rocks. Lava is a liquid that solidifies into rock when it cools. BACKGROUND: On the surface of the earth, lava is a liquid form of molten rock. Extreme heat inside the Earth's crust causes lava to develop, which then explodes to create volcanoes. Geothermal energy can be extracted and used in a variety of ways because it can be found on the Earth's surface in various forms (such as dry heat, steam vents, lava, and geysers).

Learn more about lava here:

https://brainly.com/question/15393639

#SPJ4

true or false: the outer orbitals of a halogen are further from the nucleus and are thereby more polarizable.

Answers

False, A halogen's outer orbitals are more polarizable since they are located further from the nucleus.

What commonalities in the halogens' electron configuration are there?

You'll see that the outer shells of the atoms fluorine and chlorine both have seven electrons. All the halogens share that property of having seven electrons. All of them are only one electron short of having complete shells.

Why is it challenging to take an electron out of a halogen?

Ionization force It is the amount of energy needed to separate one mole of gaseous atoms from one mole of electrons. Non-metals called halogens have seven valence electrons. Due to their lack of a tendency to lose electrons, halogens have exceptionally high ionization energies.

Learn more about Ionization here:

https://brainly.com/question/28385102

#SPJ4

the bond angle marked a in the following molecule is about . question 24 options: a) 109.5 b) 180 c) 60 d) 120 e) 90

Answers

The bond angle marked a in the following molecule is about 120. The atomic configuration of a molecule in three dimensions is known as molecular geometry.

Bond lengths, bond angles, torsional angles, and any other geometrical factors that affect each atom's position are all included in this, along with the molecule's overall form. In a complex molecule or ion, the angle between two orbitals that contain bonding electron pairs, or bonds, that are arranged around the centre atom is referred to as the bond angle.

A molecule is a collection of two or more atoms bonded together by the attractive forces known as chemical bonds; depending on the context, this definition may or may not contain ions. The number of atoms that make up a molecule might vary. If there are multiple atoms, they may all be the same atom or they may all be different.

the complete question is:

The bond angle marked a in the following molecule (H4C2O2N) is about.

learn more about  bond angle here

https://brainly.com/question/14089750

#SPJ4

if the final pressure is 1.76 atm , what was the initial pressure? express your answer in atmospheres.

Answers

The average reservoir pressure just before the initiation of a flame event, as well as the greatest normal operating pressure at a specific point in the system.

What is a good instance of pressure?

Holding a knife against a piece of fruit will demonstrate pressure in an easy way. It won't cut the surface of the fruit if you press the flat part of the knife against it. A sizable area is affected by the force (low pressure)

What are the many sorts of pressure?

The force applied physically to an object is referred to as pressure. Per unit area, the force is applied perpendicularly to the surfaces of the objects. The fundamental pressure formula is F/A. (Force per unit area). measure of pressure

Briefing:

W = 352 joule & n = 0.325 & T by kelvin = 22+273 = 295 K & Pf= 1.76

352 = (0.325 x 8.314 x 295)㏑(Pi/Pf)

∴㏑(Pi/Pf) = -352 / (0.325 x 8.314 x 295)

㏑(Pi/Pf) = - 0.44

Pi/Pf = 0.644

∴ Pi =1.76 x 0.644 = 1.13 atm

To know more about initial pressure visit:

https://brainly.com/question/28014782

#SPJ4

What is the volume of 4.5 moles a gas that is kept at Standard Atmospheric Pressure (1 atm) and 298K?

Answers

According to the ideal gas law, the volume of 4.5 moles a gas that is kept at Standard Atmospheric Pressure (1 atm) and 298 K is 11,149.074 L.

What is ideal gas law?

The ideal gas law is a equation which is applicable in a hypothetical state of an ideal gas.It is a combination of Boyle's law, Charle's law,Avogadro's law and Gay-Lussac's law . It is given as, PV=nRT where R= gas constant whose value is 8.314.The law has several limitations.

Substituting the values in the above equation V= 4.5×8.314×298/1=11,149.074 L.

Thus, the volume of 4.5 moles a gas that is kept at Standard Atmospheric Pressure (1 atm) and 298 K is 11,149.074 L.

Learn more about ideal gas law,here:

https://brainly.com/question/13821925

#SPJ1

to what volume should you dilute 25ml of a 10m sulfuric acid solution to obtain a .150 m sulfuric acid solution

Answers

Solvent volume is 1642 ml. you create a.150 m sulfuric acid solutions by diluting 25 ml of a 10 m sulfuric acid solution.

Sulfuric acid: What is it?

Oily liquid sulfuric acid is colorless. With the discharge of heat, it dissolves in water. It corrodes flesh and metals. On contact, it will scorch wood and the majority of other organic materials, although it is unlikely to start a fire.

What will happen if you get sulfuric acid on you?

Sulfuric acid exposure can happen through consumption, skin contact, physical contact, breathing polluted air, and ingestion. Sulfuric acid can irritate the mouth and throat, burn your eyes, burn a hole in the gut if eaten, cause serious skin burns, and make breathing difficult if inhaled.

Briefing:

Since this is a dilution question the equation to use is; C1V1=C2V2

C₁ = Initial concentration =10M

V₁ = Initial volume = 25ml

C₂ = Final concentration = 0.150M

V₂ = Final volume = ?

V₂ = C₁V₁/C₂

V₂ = 10.0M * 25 ml / 0.150m

V₂ = 1667 ml

Volume of solvent = 1667 - 25

=1642ml

To know more about sulfuric acid visit:

https://brainly.com/question/3645180

#SPJ4

if the enthalpy released in a reaction is -220 kj/mol, what is the heat released when .25 moles of the substance a reacts?

Answers

The amount of heat released is -55 kJ which can be calculated using the number of moles and the enthalpy of vaporization.

At constant pressure, the amount of heat that is released or absorbed is identical to the enthalpy change.

It can be expressed as follows:

q= ΔHvap

Here,  q represents the heat change and  ΔHvap represents the enthalpy change.

The amount of heat released can be calculated as follows:

q= ΔHvap×n

q=(-220 kJ/mol)×0.25 mol

q=-55 kJ

Therefore, the amount of heat released is -55 kJ.

To learn more about heat check the link below:

https://brainly.com/question/13439286

#SPJ4

choose the aqueous solution with the lowest vapor pressure. these are all solutions of nonvolatile solutes and you should assume ideal van't hoff factors where applicable.

Answers

highest product of vant hoff factor and molality will give most lower in vapor pressure

because it depends directly on both

d option is true

vant hoff factor=3 (3ions)

3*0.06=0.18 will be highest so it is true

A substance that does not readily evaporate is referred to as a nonvolatile solute. Additionally, it does not increase the vapor pressure of the solution when dissolved in a solvent. What exactly is a nonvolatile liquid then? High melting points and low vapor pressure are characteristics of nonvolatile liquids.

learn more about nonvolatile liquids here:

https://brainly.com/question/24180437

#SPJ4

Other Questions
Are the groups of electrons around carbon atom b in propene bonding or nonbonding?. if, for a perfectly competitive firm, marginal cost is greater than marginal revenue for the 100th unit, then it follows that group of answer choices producing the 100th unit adds more to total revenue than it does to total cost. producing the 100th unit adds more to total cost than it does to total revenue. marginal cost equals marginal revenue for the 99th unit. the firm is not maximizing profit, or minimizing losses, if it produces the 100th unit. b and d Chris had bowling and hockey training on the 1 May. He has bowling training every 8 days and hockey training every 2 days. On what date will he have both training sessions again? answer quick pls atp is produced in all stages of cellular respiration. which two statements describe the process of atp synthesis in the electron transport chain? A uniform rod BC of mass 4 kg is connected to a collar A by a 250-mm cord AB. Neglecting the mass of the collar and cord, determine (a) the smallest constant acceleration aA for which the cord and the rod lie in a straight line, (b) the corresponding tension in the cord. 250 mm 400 mm 350 mm tell me what you know about the intermolecular forces in water. tell us what you know about the intermolecular forces in ethanol (ch3ch2oh). how does the strength of the imfs in water compare to the strength of the imfs in ethanol? enter response here... bookmark question for later a map of a database that shows tables and relationships is called what? erp erm relational mapping form schema I need HELPPP!!!!! Pls Which of the following words has the same connotation as joyful? (Connotation means the emotional connection to a word.)A. Content B. Delighted C. Melancholy D. Displeased What is the simplified version of the expression(x^1/2 y^1/9 )^3 assume a simple model with only two countries: the united states and germany, and two goods: beer and motorcycles. suppose that the opportunity cost for the united states to produce 1 beer is 3 motorcycles and the opportunity cost for germany to produce 1 beer is 1/2 motorcycles. which of the following statements is true under which two circumstances will a switch flood a frame out of every port except the port that the frame was received on? christopher manages a grocery store in a country experiencing a high rate of inflation. he is paid in cash twice per month. on payday, he immediately goes out and buys all the goods he will need over the next two weeks in order to prevent the money in his wallet from losing value. what he can't spend, he converts into a more stable foreign currency for a steep fee. this is an example of the The point A(6,-6) is rejected over the origin and its image is point B what is are coordinates of point B what was the nature of martin luther's personal religious crisis, and how did he solve it? how did luther's religious ideas differ from those of catholicism? What is the most common type of delusion experienced by people with a schizophrenia spectrum disorder?. Timothy works in the graphic arts department and has received approval to upgrade his video card. The card has arrived, and you are ready to begin the upgrade. To ensure your personal safety, which of the following should you do first. I need help on this its Unit 3: Parallel & Perpendicular Lines Homework 7: Point-Slope Form assess tesla's overall strategy in the electric vehicle. do you think tesla is building a sustainable business model as an automaker? explain? If the government removes a binding price floor from a market, then the price received by sellers will % decrease, and the quantity sold in the market will decrease 0 decrease, and the quantity sold in the market will increase Q increase, and the quantity sold in the market will decrease Q increase, and the quantity sold in the market will increase A price floor is binding when it is set Q above the equilibrium price, causing a shortage above the equilibrium price, causing a surplus below the equilibrium price causing a shortage below the equilibrium price, causing a surplus The imposition of a binding price floor on a market causes quantity demanded to be greater than quantity supplied less than quantity supplied equal to quantity supplied Both a) and b) are possible