Answer:
subcontracting
Explanation:
I hope this is right
Can someone help me plz!!! It’s 23 points
Answer:
0.00695 A
Explanation:
µ represents [tex]10^{-6}[/tex]. Multiply this by 6,950.
What is the primary reason traffic laws exist ?
Answer:
It's to ensure a driver's safety.
while performing a running compression test how should running compression compare to static compression
Answer:
The idle speed of a running compression should be between 50-75 PSI and that is about half of the static compression.
Explanation:
The Running or Dynamic compression is used to determine how well the cylinder in an engine is absorbing air, reserving it for the proper length of time, and releasing it to the exhaust. The static or cranking compression test is used to check the sealing of the cylinder. Before performing the running compression test, the static compression test is first performed to rule out other issues like bent valves.
The standard value for the static compression is given by;
Compression ratio * 14.7 = Manufacturers Specification
The running compression should always be half of the static compression.
How can statistical analysis of a dataset inform a design process
Answer:
Explanation:.
what is time dependent
Answer:
Adjective. time-dependent (not comparable) (mathematics, physics) Determined by the value of a variable representing time.
Explanation:
Plz mark brainliest thanks
Answer: Adjective. time-dependent (not comparable) (mathematics, physics) Determined by the value of a variable representing time
should aircraft wings have infinite stiffness?
Answer:
No, they need to be somewhat flexible so that forces such as turbulance don't shear the wing off.
Can some help me with this !!! Is 26 points!!
Importance of tillage
Tillage can result in the degradation of soil, water, and air quality. Of all farm management practices, tillage may have the greatest impact on the environment. A wide variety of tillage equipment, practices and systems are available to farmers, providing opportunities to enhance environmental performance.
1.3. If the surface tension coefficient of a fluid is 0,07 N/m and the radius
of the droplet is 2,5 mm. calculate:
1.3.1 surface tension force
(2)
1.3.2 difference in pressure of the droplet
(1)
Answer:
A) F = 0.011 N
B) ΔP = 5.6 N/m²
Explanation:
We are given;
surface tension coefficient; S = 0.07 N/m
Radius; r = 2.5 mm = 0.025 m
A) Formula to find the surface tension force(F) is given by;
F = SL
Where L is effective length = 2πr
F = 0.07 × 2π × 0.025
F = 0.011 N
B) Formula for difference in pressure droplet is;
ΔP = 2S/r
Thus;
ΔP = (2 × 0.07)/0.025
ΔP = 5.6 N/m²
Bruce wants to present to his client in architectural drawing that shows the exact details of a living room kitchen bedroom and stairs in relation to other areas of the house which type of architectural drawings should Bruce use?
Answer:
section view in a general plan.
Explanation:
In Engineering, it is a standard and common practice to use drawings and models in the design and development of buildings, tools or systems that are being used for proffering solutions to specific problems in different fields such as banks, medicine, telecommunications and industries.
Hence, an architect or design engineer make use of drawings such as pictorial drawings, sketches, or architectural (technical) drawing to communicate ideas about a plan (design) to others, record and retain informations (ideas) so that they're not forgotten and analyze how different components of a plan (design) work together.
Architectural drawing is mainly implemented with computer-aided design (CAD) software and it's typically used in plans and blueprints that illustrates how to construct a building or an object.
Additionally, architectural drawings such as a section view in a general plan, show in detail how the areas of a building relate to each other, as well as accurately illustrating the actual (true) shape and size of a building in the design and development process.
In this scenario, Bruce wants to present to his client an architectural drawing that shows the exact details of a living room, kitchen, bedroom and stairs in relation to other areas of the house. Thus, the type of architectural drawings Bruce should use is a section view in a general plan.
A section view presents a vertical perspective or view by slicing through the building; revealing the exact details of wall construction, floor-to-floor construction, height and thickness of beam, and other support systems with respect to the living room, kitchen, bedroom, etc., in the building.
Which one of the following is not an economic want?
The available options are:
a. Want for a television set
b. Want for medical attention
c. Want for friendship
d. Want for new clothing
Answer:
Want for friendship
Explanation:
Given that economic want is what humans desire to have or possess such that they pay money to acquire them.
Hence, from the available options "want for friendship " is not economic want because it can't be bought with money, while other options can be bought with money or monetary transaction.
3. How can statistical analysis of a dataset inform a design process?
PLZ I NEED THIS ANSWER. THX.
Explanation:
I don't know I'm so sorry
Please help !!!!!! I will give brilliant answer to the right solution.
Answer:
can you please not dealet my answer i dont understand the question mostly because the pic is blury for me
Explanation:
have a nice day
yall know what this is called?
Answer:
oof no bro
Explanation:
Can someone answer plz!! It’s 24 points
Answer:
750 microvolts i think or 7.5 microvolts
Explanation: