b) To determine the mean and standard deviation of the distribution of the population, we can use the z-score formula.
Given:
P(X < 12) = 0.15 (15% of the children are less than 12 years of age)
P(X > 16.2) = 0.40 (40% of the children are more than 16.2 years of age)
Using the standard normal distribution table, we can find the corresponding z-scores for these probabilities.
For P(X < 12):
Using the table, the z-score for a cumulative probability of 0.15 is approximately -1.04.
For P(X > 16.2):
Using the table, the z-score for a cumulative probability of 0.40 is approximately 0.25.
The z-score formula is given by:
z = (X - μ) / σ
where:
X is the value of the random variable,
μ is the mean of the distribution,
σ is the standard deviation of the distribution.
From the z-scores, we can set up the following equations:
-1.04 = (12 - μ) / σ (equation 1)
0.25 = (16.2 - μ) / σ (equation 2)
To solve for μ and σ, we can solve this system of equations.
First, let's solve equation 1 for σ:
σ = (12 - μ) / -1.04
Substitute this into equation 2:
0.25 = (16.2 - μ) / ((12 - μ) / -1.04)
Simplify and solve for μ:
0.25 = -1.04 * (16.2 - μ) / (12 - μ)
0.25 * (12 - μ) = -1.04 * (16.2 - μ)
3 - 0.25μ = -16.848 + 1.04μ
1.29μ = 19.848
μ ≈ 15.38
Now substitute the value of μ back into equation 1 to solve for σ:
-1.04 = (12 - 15.38) / σ
-1.04σ = -3.38
σ ≈ 3.25
Therefore, the mean (μ) of the distribution is approximately 15.38 years and the standard deviation (σ) is approximately 3.25 years.
Learn more about z-score formula here:
https://brainly.com/question/30557336
#SPJ11
An employment agency specializing in temporary construction help pays heavy equipment operators $120 per day and general laborers $93 per day. If forty people were hired and the payroll was $4746 how many heavy equipment operators were employed? How many laborers?
There were 38 heavy equipment operators and 2 general laborers employed.
To calculate the number of heavy equipment operators, let's assume the number of heavy equipment operators as "x" and the number of general laborers as "y."
The cost of hiring a heavy equipment operator per day is $120, and the cost of hiring a general laborer per day is $93.
We can set up two equations based on the given information:
Equation 1: x + y = 40 (since a total of 40 people were hired)
Equation 2: 120x + 93y = 4746 (since the total payroll was $4746)
To solve these equations, we can use the substitution method.
From Equation 1, we can solve for y:
y = 40 - x
Substituting this into Equation 2:
120x + 93(40 - x) = 4746
120x + 3720 - 93x = 4746
27x = 1026
x = 38
Substituting the value of x back into Equation 1, we can find y:
38 + y = 40
y = 40 - 38
y = 2
Therefore, there were 38 heavy equipment operators and 2 general laborers employed.
To know more about solving systems of equations using the substitution method, refer here:
https://brainly.com/question/29175168#
#SPJ11
Olam Question # 2 Revisit How to attempt? Question : Think a Number Bob and Alice play a game in which Bob gives Alice a challenge to think of any number M between 1 to N. Bob then tells Alice a number X. Alice has to confirm whether X is greater or smaller than number M or equal to number M. This continues till Bob finds the number correctly. Your task is to find the maximum number of attempts Bob needs to guess the number thought of by Alice. Input Specification: input1: N, the upper limit of the number guessed by Alice. (1<=N<=108) Output Specification: Your function should return the maximum number of attempts required to find the number M(1<=M<=N).
In the given question, Bob and Alice play a game in which Bob gives Alice a challenge to think of any number M between 1 to N. Bob then tells Alice a number X. Alice has to confirm whether X is greater or smaller than number M or equal to number M.
This continues till Bob finds the number correctly. The input is given as N, the upper limit of the number guessed by Alice. We have to find the maximum number of attempts Bob needs to guess the number thought of by Alice.So, in order to find the maximum number of attempts required to find the number M(1<=M<=N), we can use binary search approach. The idea is to start with middle number of 1 and N i.e., (N+1)/2. We check whether the number is greater or smaller than the given number.
If the number is smaller, we update the range and set L as mid + 1. If the number is greater, we update the range and set R as mid – 1. We do this until the number is found. We can consider the worst case in which number of attempts required to find the number M is the maximum number of attempts that Bob needs to guess the number thought of by Alice.
The maximum number of attempts Bob needs to guess the number thought of by Alice is log2(N) + 1.Explanation:Binary Search is a technique which is used for searching for an element in a sorted list. We first start with finding the mid-point of the list. If the element is present in the mid-point, we return the index of the mid-point. If the element is smaller than the mid-point, we repeat the search on the lower half of the list.
If the element is greater than the mid-point, we repeat the search on the upper half of the list. We do this until we either find the element or we are left with an empty list. The time complexity of binary search is O(log n), where n is the size of the list.
To know more about confirm visit:
https://brainly.com/question/32246938
#SPJ11
Producers of a certain brand of refrigerator will make 1000 refrigerators available when the unit price is $ 410 . At a unit price of $ 450,5000 refrigerators will be marketed. Find the e
The following is the given data for the brand of refrigerator.
Let "x" be the unit price of the refrigerator in dollars, and "y" be the number of refrigerators produced.
Suppose that the producers of a certain brand of the refrigerator make 1000 refrigerators available when the unit price is $410.
This implies that:
y = 1000x = 410
When the unit price of the refrigerator is $450, 5000 refrigerators will be marketed.
This implies that:
y = 5000x = 450
To find the equation of the line that represents the relationship between price and quantity, we need to solve the system of equations for x and y:
1000x = 410
5000x = 450
We can solve the first equation for x as follows:
x = 410/1000 = 0.41
For the second equation, we can solve for x as follows:
x = 450/5000 = 0.09
The slope of the line that represents the relationship between price and quantity is given by:
m = (y2 - y1)/(x2 - x1)
Where (x1, y1) = (0.41, 1000) and (x2, y2) = (0.09, 5000)
m = (5000 - 1000)/(0.09 - 0.41) = -10000
Therefore, the equation of the line that represents the relationship between price and quantity is:
y - y1 = m(x - x1)
Substituting m, x1, and y1 into the equation, we get:
y - 1000 = -10000(x - 0.41)
Simplifying the equation:
y - 1000 = -10000x + 4100
y = -10000x + 5100
This is the equation of the line that represents the relationship between price and quantity.
to find the equation of the line:
https://brainly.com/question/33645095
#SPJ11
A videoke machine can be rented for Php 1,000 for three days, but for the fourth day onwards, an additional cost of Php 400 per day is added. Represent the cost of renting videoke machine as a piecewi
The cost for renting the videoke machine is a piecewise function with two cases, as shown above.
Let C(x) be the cost of renting the videoke machine for x days. Then we can define C(x) as follows:
C(x) =
1000, if x <= 3
1400 + 400(x-3), if x > 3
The function C(x) is a piecewise function because it is defined differently for x <= 3 and x > 3. For the first three days, the cost is a flat rate of Php 1,000. For the fourth day onwards, an additional cost of Php 400 per day is added. Therefore, the cost for renting the videoke machine is a piecewise function with two cases, as shown above.
Learn more about " piecewise function" : https://brainly.com/question/27262465
#SPJ11
IIFinding a pdf via a cdf ∥ Let U 1
,U 2
,U 3
,U 4
, and U 5
be 5 independent rv's from a Uniform distribution on [0,1]. The median of 5 numbers is defined to be whichever of the 5 values is in the middle, that is, the 3 rd largest. Let X denote the median of U 1
,…,U 5
. In this problem we will investigate the distribution (pdf and cdf) of X. I[To think just for a moment before diving in, since we are talking about a median here, we would anticipate that the median would not be uniformly distributed over the interval, but rather it would have higher probability density near the middle of the interval than toward the ends. In this problem we are trying to find the exact mathematical form of its probability density function, and at this point we are anticipating it to look rather hump-like.] (a) For x between 0 and 1, explain why P{X≤x}=P{B≥3}, where B has a Binom (5,x) distribution. (b) Use the relationship P{X≤x}=P{B≥3} to write down an explicit polynomial expression for the cumulative distribution function F X
(x). (c) Find the probability P{.25≤X≤.75}. [I You can use part (b) for this - subtract two values.॥] (d) Find the probability density function f X
(x). (e) In this part you will simulate performing many repetitions of the experiment of finding the median of a sample of 5 rv's from a U[0,1] distribution. Note that you can generate one such sample using the command runif (5), and you can find the median of your sample by using the median function. You could repeat this experiment many times, say for example 10,000 times, and creat a vector X s
that records the median of each of your 10,000 samples. Then plot a density histogram of X and overlay a plot of the curve for the pdf f X
(x) you found in part (d). The histogram and the curve should nearly coincide. IITip for the plotting: see here.】 Part (e) provides a check of your answer to part (d) as well as providing some practice doing simulations. Plus I hope you can enjoy that satisfying feeling when you've worked hard on two very different ways - math and simulation - of approaching a question and in the end they reinforce each other and give confidence that all of that work was correct.
P{X ≤ x} = P{B ≥ 3} where B has a Binom (5, x) distribution. An explicit polynomial expression for the cumulative distribution function F X(x) is given by FX(x) = 10x3(1 − x)2 + 5x4(1 − x) + x5 .The probability density function fX(x) is given by
fX(x) = 30x2(1 − x)2 − 20x3(1 − x) + 5x4. P{0.25 ≤ X ≤ 0.75} = 0.324.
(a) P{X ≤ x} = P{B ≥ 3} where B has a Binom (5, x) distribution is given as follows: For x between 0 and 1, let B = number of U's that are less than or equal to x. Then, B has a Binom (5, x) distribution. Hence, P{B ≥ 3} can be calculated from the Binomial tables (or from R with p binom (2, 5, x, lower.tail = FALSE)). Also, X ≤ x if and only if at least three of the U's are less than or equal to x.
Therefore, [tex]P{X ≤ x} = P{B ≥ 3}.[/tex]Hence, [tex]P{X ≤ x} = P{B ≥ 3}[/tex]where B has a Binom (5, x) distribution(b) To write down an explicit polynomial expression for the cumulative distribution function FX(x), we have to use the relationship [tex]P{X ≤ x} = P{B ≥ 3}.[/tex]
For this, we use the fact that if B has a Binom (n,p) distribution, then P{B = k} = (nCk)(p^k)(1-p)^(n-k), where nCk is the number of combinations of n things taken k at a time.
We see that
P{B = 0} = (5C0)(x^0)(1-x)^(5-0) = (1-x)^5,P{B = 1} = (5C1)(x^1)(1-x)^(5-1) = 5x(1-x)^4,P{B = 2} = (5C2)(x^2)(1-x)^(5-2) = 10x^2(1-x)^3,
P{B = 3} = (5C3)(x^3)(1-x)^(5-3) = 10x^3(1-x)^2,P{B = 4} = (5C4)(x^4)(1-x)^(5-4) = 5x^4(1-x),P{B = 5} = (5C5)(x^5)(1-x)^(5-5) = x^5
Hence, using the relationship P{X ≤ x} = P{B ≥ 3},
we have For x between 0 and 1,
FX(x) = P{X ≤ x} = P{B ≥ 3} = P{B = 3} + P{B = 4} + P{B = 5} = 10x^3(1-x)^2 + 5x^4(1-x) + x^5 .
To find the probability P{0.25 ≤ X ≤ 0.75},
we will use the relationship P{X ≤ x} = P{B ≥ 3} and the expression for the cumulative distribution function that we have derived in part .
Then, P{0.25 ≤ X ≤ 0.75} can be calculated as follows:
P{0.25 ≤ X ≤ 0.75} = FX(0.75) − FX(0.25) = [10(0.75)^3(1 − 0.75)^2 + 5(0.75)^4(1 − 0.75) + (0.75)^5] − [10(0.25)^3(1 − 0.25)^2 + 5(0.25)^4(1 − 0.25) + (0.25)^5] = 0.324.
To find the probability density function fX(x), we differentiate the cumulative distribution function derived in part .
We get fX(x) = FX'(x) = d/dx[10x^3(1-x)^2 + 5x^4(1-x) + x^5] = 30x^2(1-x)^2 − 20x^3(1-x) + 5x^4 .The answer is given as follows:
P{X ≤ x} = P{B ≥ 3} where B has a Binom (5, x) distribution. An explicit polynomial expression for the cumulative distribution function F X(x) is given by FX(x) = 10x3(1 − x)2 + 5x4(1 − x) + x5 . P{0.25 ≤ X ≤ 0.75} = 0.324.
The probability density function fX(x) is given by
fX(x) = 30x2(1 − x)2 − 20x3(1 − x) + 5x4.
To know more about cumulative distribution function visit:
brainly.com/question/30402457
#SPJ11
Let S=T= the set of polynomials with real coefficients, and define a function from S to T by mapping each polynomial to its derivative. Is this function one-to-one? Is it onto?
The function that maps each polynomial in S to its derivative is not one-to-one.
To show that it is not one-to-one, we need to demonstrate that there exist two different polynomials in S that map to the same derivative. Consider two polynomials in S: f(x) = x^2 and g(x) = x^2 + 1. The derivatives of both f(x) and g(x) are equal to 2x. Therefore, the function maps both f(x) and g(x) to the same derivative, indicating that it is not one-to-one.
On the other hand, the function is onto. This means that for any polynomial in T (which is a set of polynomials with real coefficients), there exists at least one polynomial in S that maps to it. In this case, for any polynomial g(x) in T, we can find a polynomial f(x) in S such that f'(x) = g(x). We can choose f(x) to be the antiderivative of g(x), which exists since g(x) is a polynomial. Therefore, the function is onto.
Learn more about function from
https://brainly.com/question/11624077
#SPJ11
A street vendor has a total of 350 short and long sleeve T-shirts. If she sells the short sleeve shirts for $12 each and the long sleeve shirts for $16 each, how many of each did she sell if she sold
The problem is not solvable as stated, since the number of short sleeve T-shirts sold cannot be larger than the total number of shirts available.
Let x be the number of short sleeve T-shirts sold, and y be the number of long sleeve T-shirts sold. Then we have two equations based on the information given in the problem:
x + y = 350 (equation 1, since the vendor has a total of 350 shirts)
12x + 16y = 5000 (equation 2, since the total revenue from selling x short sleeve shirts and y long sleeve shirts is $5000)
We can use equation 1 to solve for y in terms of x:
y = 350 - x
Substituting this into equation 2, we get:
12x + 16(350 - x) = 5000
Simplifying and solving for x, we get:
4x = 1800
x = 450
Since x represents the number of short sleeve T-shirts sold, and we know that the vendor sold a total of 350 shirts, we can see that x is too large. Therefore, there is no solution to this problem that satisfies the conditions given.
In other words, the problem is not solvable as stated, since the number of short sleeve T-shirts sold cannot be larger than the total number of shirts available.
Learn more about " equations" : https://brainly.com/question/29174899
#SPJ11
the Bored, Inc, has been producing and setang wakeboards for many ycars. They obseve that their monthy overhead is $53,500 and each wakeboard costs them $254 in materiats and labor to produce. They sell each wakeboard for $480. (a) Let x represent the number or wakeboards that are produced and sold. Find the function P(x) for Above the Bored's monthly profit, in dollars P(x)= (b) If Above the Bored produces and sells 173 wakeboards in a month, then for that month they will have a net proft of $ (c) In order to break even, Above the Bored needs to sell a mininum of wakeboards in a month.
a. The function for Above the Bored's monthly profit is P(x) = $226x.
b. Above the Bored will have a net profit of $39,098.
c. Above the Bored needs to sell a minimum of 1 wakeboard in a month to break even.
(a) To find the function P(x) for Above the Bored's monthly profit, we need to subtract the cost of producing x wakeboards from the revenue generated by selling x wakeboards.
Revenue = Selling price per wakeboard * Number of wakeboards sold
Revenue = $480 * x
Cost = Cost per wakeboard * Number of wakeboards produced
Cost = $254 * x
Profit = Revenue - Cost
P(x) = $480x - $254x
P(x) = $226x
Therefore, the function for Above the Bored's monthly profit is P(x) = $226x.
(b) If Above the Bored produces and sells 173 wakeboards in a month, we can substitute x = 173 into the profit function to find the net profit:
P(173) = $226 * 173
P(173) = $39,098
Therefore, for that month, Above the Bored will have a net profit of $39,098.
(c) To break even, Above the Bored needs to have a profit of $0. In other words, the revenue generated must equal the cost incurred.
Setting P(x) = 0, we can solve for x:
$226x = 0
x = 0
Since the number of wakeboards cannot be zero (as it is not possible to sell no wakeboards), the minimum number of wakeboards Above the Bored needs to sell in a month to break even is 1.
Therefore, Above the Bored needs to sell a minimum of 1 wakeboard in a month to break even.
Learn more about function from
https://brainly.com/question/11624077
#SPJ11
The workers' union at a certain university is quite strong. About 96% of all workers employed by the university belong to the workers' union. Recently, the workers went on strike, and now a local TV station plans to interview a sample of 20 workers, chosen at random, to get their opinions on the strike.
Answer the following.
(If necessary, consult a list of formulas.)
(a) Estimate the number of workers in the sample who are union members by giving the mean of the relevant distribution (that is, the expectation of the relevant random variable). Do not round your response.
(b) Quantify the uncertainty of your estimate by giving the standard deviation of the distribution. Round your response to at least three decimal places.
A. The mean of the relevant distribution is 19.2.
B. Rounded to at least three decimal places, the standard deviation of the distribution is approximately 1.760.
(a) The number of workers in the sample who are union members can be estimated by taking the expected value of the relevant random variable. In this case, the random variable represents the number of union members in a sample of 20 workers.
Since 96% of all workers belong to the union, we can expect that 96% of the workers in the sample will also be union members. Therefore, the expected value of the random variable is given by:
E(X) = np
where n is the sample size (20) and p is the probability of success (0.96).
E(X) = 20 * 0.96 = 19.2
Therefore, the mean of the relevant distribution is 19.2.
(b) To quantify the uncertainty of the estimate, we can calculate the standard deviation of the distribution. For a binomial distribution, the standard deviation is given by:
σ = sqrt(np(1-p))
Using the same values as above, we can calculate the standard deviation:
σ = sqrt(20 * 0.96 * (1 - 0.96))
= sqrt(20 * 0.96 * 0.04)
≈ 1.760
Rounded to at least three decimal places, the standard deviation of the distribution is approximately 1.760.
Learn more about distribution from
https://brainly.com/question/23286309
#SPJ11
Assume the average selling price for houses in a certain county is $339,000 with a standard deviation of $60,000. a) Determine the coefficient of variation. b) Caculate the z-score for a house that sells for $329,000. c) Using the Empirical Rule, determine the range of prices that includes 68% of the homes around the mean. d) Using Chebychev's Theorem, determine the range of prices that includes at least 96% of the homes around the mear
a) The coefficient of variation is the ratio of the standard deviation to the mean. The formula for the coefficient of variation (CV) is given by:CV = (Standard deviation/Mean) × 100.
We are given the mean selling price of houses in a certain county, which is $339,000, and the standard deviation of the selling prices, which is $60,000.Substituting these values into the formula, we get:CV = (60,000/339,000) × 100= 17.69%Therefore, the coefficient of variation for the selling prices of houses in the county is 17.69%.
b) The z-score is a measure of how many standard deviations away from the mean a particular data point lies.
The formula for the z-score is given by:z = (x – μ) / σWe are given the selling price of a house, which is $329,000. The mean selling price of houses in the county is $339,000, and the standard deviation is $60,000.Substituting these values into the formula, we get:z = (329,000 – 339,000) / 60,000= -0.1667Therefore, the z-score for a house that sells for $329,000 is -0.1667.
c) The empirical rule states that for data that follows a normal distribution, approximately 68% of the data falls within one standard deviation of the mean. Therefore, the range of prices that includes 68% of the homes around the mean can be calculated as follows:Lower limit = Mean – Standard deviation= 339,000 – 60,000= 279,000Upper limit = Mean + Standard deviation= 339,000 + 60,000= 399,000Therefore, the range of prices that includes 68% of the homes around the mean is $279,000 to $399,000.
d) Chebychev's Theorem states that for any dataset, regardless of the distribution, at least (1 – 1/k²) of the data falls within k standard deviations of the mean. Therefore, to determine the range of prices that includes at least 96% of the homes around the mean, we need to find k such that (1 – 1/k²) = 0.96Solving for k, we get:k = 5Therefore, at least 96% of the data falls within 5 standard deviations of the mean. The range of prices that includes at least 96% of the homes around the mean can be calculated as follows:
Lower limit = Mean – (5 × Standard deviation)= 339,000 – (5 × 60,000)= 39,000Upper limit = Mean + (5 × Standard deviation)= 339,000 + (5 × 60,000)= 639,000Therefore, the range of prices that includes at least 96% of the homes around the mean is $39,000 to $639,000.
In statistics, the coefficient of variation (CV) is the ratio of the standard deviation to the mean. It is expressed as a percentage, and it is a measure of the relative variability of a dataset. In this question, we were given the mean selling price of houses in a certain county, which was $339,000, and the standard deviation of the selling prices, which was $60,000. Using the formula for the coefficient of variation, we calculated that the CV was 17.69%. This means that the standard deviation is about 17.69% of the mean selling price of houses in the county. A high CV indicates that the data has a high degree of variability, while a low CV indicates that the data has a low degree of variability.The z-score is a measure of how many standard deviations away from the mean a particular data point lies. In this question, we were asked to calculate the z-score for a house that sold for $329,000.
Using the formula for the z-score, we calculated that the z-score was -0.1667. This means that the selling price of the house was 0.1667 standard deviations below the mean selling price of houses in the county. A negative z-score indicates that the data point is below the mean. A positive z-score indicates that the data point is above the mean.The Empirical Rule is a statistical rule that states that for data that follows a normal distribution, approximately 68% of the data falls within one standard deviation of the mean, approximately 95% of the data falls within two standard deviations of the mean, and approximately 99.7% of the data falls within three standard deviations of the mean.
In this question, we were asked to use the Empirical Rule to determine the range of prices that includes 68% of the homes around the mean. Using the formula for the range of prices, we calculated that the range was $279,000 to $399,000.
Chebychev's Theorem is a statistical theorem that can be used to determine the minimum percentage of data that falls within k standard deviations of the mean. In this question, we were asked to use Chebychev's Theorem to determine the range of prices that includes at least 96% of the homes around the mean.
Using the formula for Chebychev's Theorem, we calculated that the range was $39,000 to $639,000. Therefore, we can conclude that the range of selling prices of houses in the county is quite wide, with some houses selling for as low as $39,000 and others selling for as high as $639,000.
To know more about standard deviation :
brainly.com/question/29115611
#SPJ11
(True or False) If you perform a test and get a p-value = 0.051 you should reject the null hypothesis.
True
False
If you perform a test and get a p-value = 0.051 you should not reject the null hypothesis. The statement given in the question is False.
A p-value is a measure of statistical significance, and it is used to evaluate the likelihood of a null hypothesis being true. If the p-value is less than or equal to the significance level, the null hypothesis is rejected. However, if the p-value is greater than the significance level, the null hypothesis is accepted, which means that the results are not statistically significant and can occur due to chance alone. A p-value is a measure of the evidence against the null hypothesis. The smaller the p-value, the stronger the evidence against the null hypothesis. On the other hand, a larger p-value indicates that the evidence against the null hypothesis is weaker. A p-value less than 0.05 is considered statistically significant.
Therefore, if you perform a test and get a p-value = 0.051 you should not reject the null hypothesis.
Learn more about p-value visit:
brainly.com/question/30461126
#SPJ11
Convert the hexadecimal number 3AB8 (base 16 ) to binary.
the hexadecimal number 3AB8 (base 16) is equivalent to 0011 1010 1011 1000 in binary (base 2).
The above solution comprises more than 100 words.
The hexadecimal number 3AB8 can be converted to binary in the following way.
Step 1: Write the given hexadecimal number3AB8
Step 2: Convert each hexadecimal digit to its binary equivalent using the following table.
Hexadecimal Binary
0 00001
00012
00103
00114 01005 01016 01107 01118 10009 100110 101011 101112 110013 110114 111015 1111
Step 3: Combine the binary equivalent of each hexadecimal digit together.3AB8 = 0011 1010 1011 1000,
To know more about hexadecimal visit:
https://brainly.com/question/28875438
#SPJ11
Let f(x)=e^x+1g(x)=x^2−2h(x)=−3x+8 1) Find the asea between the x-axis and f(x) as x goes from 0 to 3
Therefore, the area between the x-axis and f(x) as x goes from 0 to 3 is [tex]e^3 + 2.[/tex]
To find the area between the x-axis and the function f(x) as x goes from 0 to 3, we can integrate the absolute value of f(x) over that interval. The absolute value of f(x) is |[tex]e^x + 1[/tex]|. To find the area, we can integrate |[tex]e^x + 1[/tex]| from x = 0 to x = 3:
Area = ∫[0, 3] |[tex]e^x + 1[/tex]| dx
Since [tex]e^x + 1[/tex] is positive for all x, we can simplify the absolute value:
Area = ∫[0, 3] [tex](e^x + 1) dx[/tex]
Integrating this function over the interval [0, 3], we have:
Area = [tex][e^x + x][/tex] evaluated from 0 to 3
[tex]= (e^3 + 3) - (e^0 + 0)\\= e^3 + 3 - 1\\= e^3 + 2\\[/tex]
To know more about area,
https://brainly.com/question/32639626
#SPJ11
helpppppppppppppp pls
Answer:
100 Billion
Step-by-step explanation:
Let's say the number of planets is equal to P.
[tex]P = x^{2} - (m^4+15)\\x = 14\\m = 3[/tex]
Now we substitute 14 and 3 for x and m in the first equation.
[tex]P = 14^2-(3^4+15)\\P = 196-(81+15)\\P = 196-96\\P = 100[/tex]
The question said in billions, so the answer would be 100 billion which is the first option.
A satellite is located at a point where two tangents to the equator of the earth intersect. If the two tangents form an angle of about 30 degrees, how wide is the coverage of the satellite?
In a circle, the angle subtended by a diameter from any point on the circumference is always 90°. The width of the coverage of the satellite is [tex]\frac{1}{12}[/tex] of the circumference of the circle.
The satellite located at the point where two tangents to the equator of the Earth intersect. If the two tangents form an angle of 30 degrees, how wide is the coverage of the satellite?Let AB and CD are the tangents to the equator, meeting at O as shown below: [tex]\angle[/tex]AOB = [tex]\angle[/tex]COD = 90°As O is the center of a circle, and the tangents AB and CD meet at O, the angle AOC = 180°.That implies [tex]\angle[/tex]AOD = 180° - [tex]\angle[/tex]AOC = 180° - 180° = 0°, i.e., the straight line AD is a diameter of the circle.In a circle, the angle subtended by a diameter from any point on the circumference is always 90°.Therefore, [tex]\angle[/tex]AEB = [tex]\angle[/tex]AOF = 90°Here, the straight line EF represents the coverage of the satellite, which subtends an angle at the center of the circle which is 30 degrees, because the two tangents make an angle of 30 degrees. Therefore, in order to find the length of the arc EF, you need to find out what proportion of the full circumference of the circle is 30 degrees. So we have:[tex]\frac{30}{360}[/tex] x [tex]\pi[/tex]r, where r is the radius of the circle.The circumference of the circle = 2[tex]\pi[/tex]r = 360°Therefore, [tex]\frac{30}{360}[/tex] x [tex]\pi[/tex]r = [tex]\frac{1}{12}[/tex] x [tex]\pi[/tex]r.The width of the coverage of the satellite = arc EF = [tex]\frac{1}{12}[/tex] x [tex]\pi[/tex]r. Therefore, the width of the coverage of the satellite is [tex]\frac{1}{12}[/tex] of the circumference of the circle.
Learn more about angle :
https://brainly.com/question/28451077
#SPJ11
Calculate the double integral. 6x/(1 + xy) dA, R = [0, 6] x [0, 1]
The value of the double integral ∬R (6x/(1 + xy)) dA over the region
R = [0, 6] × [0, 1] is 6 ln(7).
To calculate the double integral ∬R (6x/(1 + xy)) dA over the region
R = [0, 6] × [0, 1], we can integrate with respect to x and y using the limits of the region.
The integral can be written as:
∬R (6x/(1 + xy)) dA = [tex]\int\limits^1_0\int\limits^6_0[/tex] (6x/(1 + xy)) dx dy
Let's start by integrating with respect to x:
[tex]\int\limits^6_0[/tex](6x/(1 + xy)) dx
To evaluate this integral, we can use a substitution.
Let u = 1 + xy,
du/dx = y.
When x = 0,
u = 1 + 0y = 1.
When x = 6,
u = 1 + 6y
= 1 + 6
= 7.
Using this substitution, the integral becomes:
[tex]\int\limits^7_1[/tex] (6x/(1 + xy)) dx = [tex]\int\limits^7_1[/tex](6/u) du
Integrating, we have:
= 6 ln|7| - 6 ln|1|
= 6 ln(7)
Now, we can integrate with respect to y:
= [tex]\int\limits^1_0[/tex] (6 ln(7)) dy
= 6 ln(7) - 0
= 6 ln(7)
Therefore, the value of the double integral ∬R (6x/(1 + xy)) dA over the region R = [0, 6] × [0, 1] is 6 ln(7).
Learn more about double integral here:
brainly.com/question/15072988
#SPJ4
The value of the double integral [tex]\int\limits^1_0\int\limits^6_0 \frac{6x}{(1 + xy)} dA[/tex], over the given region [0, 6] x [0, 1] is (343/3)ln(7).
Now, for the double integral [tex]\int\limits^1_0\int\limits^6_0 \frac{6x}{(1 + xy)} dA[/tex], use the standard method of integration.
First, find the antiderivative of the function 6x/(1 + xy) with respect to x.
By integrating with respect to x, we get:
∫(6x/(1 + xy)) dx = 3ln(1 + xy) + C₁
where C₁ is the constant of integration.
Now, we apply the definite integral over x, considering the limits of integration [0, 6]:
[tex]\int\limits^6_0 (3 ln (1 + xy) + C_{1} ) dx[/tex]
To proceed further, substitute the limits of integration into the equation:
[3ln(1 + 6y) + C₁] - [3ln(1 + 0y) + C₁]
Since ln(1 + 0y) is equal to ln(1), which is 0, simplify the expression to:
3ln(1 + 6y) + C₁
Now, integrate this expression with respect to y, considering the limits of integration [0, 1]:
[tex]\int\limits^1_0 (3 ln (1 + 6y) + C_{1} ) dy[/tex]
To integrate the function, we use the property of logarithms:
[tex]\int\limits^1_0 ( ln (1 + 6y))^3 + C_{1} ) dy[/tex]
Applying the power rule of integration, this becomes:
[(1/3)(1 + 6y)³ln(1 + 6y) + C₂] evaluated from 0 to 1,
where C₂ is the constant of integration.
Now, we substitute the limits of integration into the equation:
(1/3)(1 + 6(1))³ln(1 + 6(1)) + C₂ - (1/3)(1 + 6(0))³ln(1 + 6(0)) - C₂
Simplifying further:
(343/3)ln(7) + C₂ - C₂
(343/3)ln(7)
So, the value of the double integral [tex]\int\limits^1_0\int\limits^6_0 \frac{6x}{(1 + xy)} dA[/tex], over the given region [0, 6] x [0, 1] is (343/3)ln(7).
To learn more about integration visit :
brainly.com/question/18125359
#SPJ4
Find the equation of the line tangent to the graph of f(x)=-3x²+4x+3 at x = 2.
Given that the function is `f(x) = -3x² + 4x + 3` and we need to find the equation of the tangent to the graph at `x = 2`.Firstly, we will find the slope of the tangent by finding the derivative of the given function. `f(x) = -3x² + 4x + 3.
Differentiating with respect to x, we get,`f'(x) = -6x + 4`Now, we will substitute the value of `x = 2` in `f'(x)` to find the slope of the tangent.`f'(2) = -6(2) + 4 = -8` Therefore, the slope of the tangent is `-8`.Now, we will find the equation of the tangent using the slope-intercept form of a line.`y - y₁ = m(x - x₁).
Where `(x₁, y₁)` is the point `(2, f(2))` on the graph of `f(x)`.`f(2) = -3(2)² + 4(2) + 3 = -3 + 8 + 3 = 8`Hence, the point is `(2, 8)`.So, we have the slope of the tangent as `-8` and a point `(2, 8)` on the tangent.Therefore, the equation of the tangent is: `y - 8 = -8(x - 2)`On solving, we get:`y = -8x + 24`Hence, the equation of the line tangent to the graph of `f(x) = -3x² + 4x + 3` at `x = 2` is `y = -8x + 24`.
To know more about function visit :
https://brainly.com/question/30721594
#SPJ11
Let f(x)= e^x/1+e^x
(a) Find the derivative f′.Carefully justify each step using the differentiation rules from the text. (You may identify rules by the number or by a short description such as the quotient rule.)
The given function is f(x) = /1 + e^x. We are to find the derivative of the function.
Using the quotient rule, we have f'(x) = [(1 + e^x)*e^x - e^x*(e^x)] / (1 e^x)^2
Simplifying, we get f'(x) = e^x / (1 + e^x)^2
We used the quotient rule of differentiation which states that if y = u/v,
where u and v are differentiable functions of x, then the derivative of y with respect to x is given byy'
= [v*du/dx - u*dv/dx]/v²
We can see that the given function can be written in the form y = u/v,
where u = e^x and
v = 1 + e^x.
On differentiating u and v with respect to x, we get du/dx = e^x and
dv/dx = e^x.
We then substitute these values in the quotient rule to get the derivative f'(x)
= e^x / (1 + e^x)^2.
Hence, the derivative of the given function is f'(x) = e^x / (1 + e^x)^2.
To know more about derivative visit:
https://brainly.com/question/25324584
#SPJ11
Suppose that all of the outcomes of a random variable are (a, b, c, d, e), and that P(a)=P(b)=P(c)=P(d)=P(e)= 1/5, (that is, all outcomes a, b, c, d, and e each have a 1/5 probability of occuring). Definethe events A=(a,b) B= [b,c), C= (c,d), and D= {e} Then events B and C are
Mutually exclusive and independent
Not mutually exclusive but independent.
Mutually exclusive but not independent.
Neither mutually exclusive or independent.
The answer is: Not mutually exclusive but independent.
Note that B and C are not mutually exclusive, since they have an intersection: B ∩ C = {c}. However, we can check whether they are independent by verifying if the probability of their intersection is the product of their individual probabilities:
P(B) = P(b) + P(c) = 1/5 + 1/5 = 2/5
P(C) = P(c) + P(d) = 1/5 + 1/5 = 2/5
P(B ∩ C) = P(c) = 1/5
Since P(B) * P(C) = (2/5) * (2/5) = 4/25 ≠ P(B ∩ C), we conclude that events B and C are not independent.
Therefore, the answer is: Not mutually exclusive but independent.
Learn more about independent. from
https://brainly.com/question/25223322
#SPJ11
Is SAA a triangle similarity theorem?
The SAA (Side-Angle-Angle) criterion is not a triangle similarity theorem.
Triangle similarity theorems are used to determine if two triangles are similar. Similar triangles have corresponding angles that are equal and corresponding sides that are proportional. There are three main triangle similarity theorems: AA (Angle-Angle) Criterion.
SSS (Side-Side-Side) Criterion: If the lengths of the corresponding sides of two triangles are proportional, then the triangles are similar. SAS (Side-Angle-Side) Criterion.
To know more about domain visit:
https://brainly.com/question/28135761
#SPJ11
differentiate the function
y=(x²+4x+3 y=x²+4x+3) /√x
differentiate the function
f(x)=[(1/x²) -(3/x^4)](x+5x³)
The derivative of the function y = (x² + 4x + 3)/(√x) is shown below:
Given function,y = (x² + 4x + 3)/(√x)We can rewrite the given function as y = (x² + 4x + 3) * x^(-1/2)
Hence, y = (x² + 4x + 3) * x^(-1/2)
We can use the Quotient Rule of Differentiation to differentiate the above function.
Hence, the derivative of the given function y = (x² + 4x + 3)/(√x) is
dy/dx = [(2x + 4) * x^(1/2) - (x² + 4x + 3) * (1/2) * x^(-1/2)] / x = [2x(x + 2) - (x² + 4x + 3)] / [2x^(3/2)]
We simplify the expression, dy/dx = (x - 1) / [x^(3/2)]
Hence, the derivative of the given function y = (x² + 4x + 3)/(√x) is
(x - 1) / [x^(3/2)].
The derivative of the function f(x) = [(1/x²) - (3/x^4)](x + 5x³) is shown below:
Given function, f(x) = [(1/x²) - (3/x^4)](x + 5x³)
We can use the Product Rule of Differentiation to differentiate the above function.
Hence, the derivative of the given function f(x) = [(1/x²) - (3/x^4)](x + 5x³) is
df/dx = [(1/x²) - (3/x^4)] * (3x² + 1) + [(1/x²) - (3/x^4)] * 15x²
We simplify the expression, df/dx = [(1/x²) - (3/x^4)] * [3x² + 1 + 15x²]
Hence, the derivative of the given function f(x) = [(1/x²) - (3/x^4)](x + 5x³) is
[(1/x²) - (3/x^4)] * [3x² + 1 + 15x²].
To know more about differentiation visit:
https://brainly.com/question/25324584
#SPJ11
Use the following sorting algorithms to sort the following list {4, 9, 2, 5, 3, 10, 8, 1, 6, 7} in increasing order
Question: Use shell sort (please use the K values as N/2, N/4, ..., 1, and show the contents after each round of K)
The algorithm progresses and the K values decrease, the sublists become more sorted, leading to a final sorted list.
To sort the list {4, 9, 2, 5, 3, 10, 8, 1, 6, 7} using Shell sort, we will use the K values as N/2, N/4, ..., 1, where N is the size of the list.
Here are the steps and contents after each round of K:
Initial list: {4, 9, 2, 5, 3, 10, 8, 1, 6, 7}
Step 1 (K = N/2 = 10/2 = 5):
Splitting the list into 5 sublists:
Sublist 1: {4, 10}
Sublist 2: {9}
Sublist 3: {2, 8}
Sublist 4: {5, 1}
Sublist 5: {3, 6, 7}
Sorting each sublist:
Sublist 1: {4, 10}
Sublist 2: {9}
Sublist 3: {2, 8}
Sublist 4: {1, 5}
Sublist 5: {3, 6, 7}
Contents after K = 5: {4, 10, 9, 2, 8, 1, 5, 3, 6, 7}
Step 2 (K = N/4 = 10/4 = 2):
Splitting the list into 2 sublists:
Sublist 1: {4, 9, 8, 5, 6}
Sublist 2: {10, 2, 1, 3, 7}
Sorting each sublist:
Sublist 1: {4, 5, 6, 8, 9}
Sublist 2: {1, 2, 3, 7, 10}
Contents after K = 2: {4, 5, 6, 8, 9, 1, 2, 3, 7, 10}
Step 3 (K = N/8 = 10/8 = 1):
Splitting the list into 1 sublist:
Sublist: {4, 5, 6, 8, 9, 1, 2, 3, 7, 10}
Sorting the sublist:
Sublist: {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}
Contents after K = 1: {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}
After the final step, the list is sorted in increasing order: {1, 2, 3, 4, 5, 6, 7, 8, 9, 10}.
Note: Shell sort is an in-place comparison-based sorting algorithm that uses a diminishing increment sequence (in this case, K values) to sort the elements. The algorithm repeatedly divides the list into smaller sublists and sorts them using an insertion sort. As the algorithm progresses and the K values decrease, the sublists become more sorted, leading to a final sorted list.
To know more about algorithm, visit:
https://brainly.com/question/33268466
#SPJ11
Which of the following points is not on the line defined by the equation Y = 9X + 4 a) X=0 and Ŷ = 4 b) X = 3 and Ŷ c)= 31 X=22 and Ŷ=2 d) X= .5 and Y = 8.5
The point that is not on the line defined by the equation Y = 9X + 4 is c) X = 22 and Ŷ = 2.
To check which point is not on the line defined by the equation Y = 9X + 4, we substitute the values of X and Ŷ (predicted Y value) into the equation and see if they satisfy the equation.
a) X = 0 and Ŷ = 4:
Y = 9(0) + 4 = 4
The point (X = 0, Y = 4) satisfies the equation, so it is on the line.
b) X = 3 and Ŷ:
Y = 9(3) + 4 = 31
The point (X = 3, Y = 31) satisfies the equation, so it is on the line.
c) X = 22 and Ŷ = 2:
Y = 9(22) + 4 = 202
The point (X = 22, Y = 202) does not satisfy the equation, so it is not on the line.
d) X = 0.5 and Y = 8.5:
8.5 = 9(0.5) + 4
8.5 = 4.5 + 4
8.5 = 8.5
The point (X = 0.5, Y = 8.5) satisfies the equation, so it is on the line.
Therefore, the point that is not on the line defined by the equation Y = 9X + 4 is c) X = 22 and Ŷ = 2.
Learn more about equation from
https://brainly.com/question/29174899
#SPJ11
Solve the given differential equation: (a) y′+(1/x)y=3cos2x, x>0
(b) xy′+2y=e^x , x>0
(a) The solution to the differential equation is y = (3/2)(sin(2x)/|x|) + C/|x|, where C is a constant.
(b) The solution to the differential equation is y = ((x^2 - 2x + 2)e^x + C)/x^3, where C is a constant.
(a) To solve the differential equation y' + (1/x)y = 3cos(2x), we can use the method of integrating factors. The integrating factor is given by μ(x) = e^(∫(1/x)dx) = e^(ln|x|) = |x|. Multiplying both sides of the equation by |x|, we have |x|y' + y = 3xcos(2x). Now, we can rewrite the left side as (|x|y)' = 3xcos(2x). Integrating both sides with respect to x, we get |x|y = ∫(3xcos(2x))dx. Evaluating the integral and simplifying, we obtain |x|y = (3/2)sin(2x) + C, where C is the constant of integration. Dividing both sides by |x|, we finally have y = (3/2)(sin(2x)/|x|) + C/|x|.
(b) To solve the differential equation xy' + 2y = e^x, we can use the method of integrating factors. The integrating factor is given by μ(x) = e^(∫(2/x)dx) = e^(2ln|x|) = |x|^2. Multiplying both sides of the equation by |x|^2, we have x^3y' + 2x^2y = x^2e^x. Now, we can rewrite the left side as (x^3y)' = x^2e^x. Integrating both sides with respect to x, we get x^3y = ∫(x^2e^x)dx. Evaluating the integral and simplifying, we obtain x^3y = (x^2 - 2x + 2)e^x + C, where C is the constant of integration. Dividing both sides by x^3, we finally have y = ((x^2 - 2x + 2)e^x + C)/x^3.
Learn more about differential equation here :-
https://brainly.com/question/32645495
#SPJ11
Use synthetic division to find the quotient: (3x^3-7x^2+2x+1)/(x-2)
The quotient is 3x^2 - x - 2.
To use synthetic division to find the quotient of (3x^3 - 7x^2 + 2x + 1) divided by (x - 2), we set up the synthetic division table as follows:
Copy code
| 3 -7 2 1
2 |_____________________
First, we write down the coefficients of the dividend (3x^3 - 7x^2 + 2x + 1) in descending order: 3, -7, 2, 1. Then, we bring down the first coefficient, 3, as the first value in the second row.
Next, we multiply the divisor, 2, by the number in the second row and write the result below the next coefficient. Multiply: 2 * 3 = 6.
Copy code
| 3 -7 2 1
2 | 6
Add the result, 6, to the next coefficient in the first row: -7 + 6 = -1. Write this value in the second row.
Copy code
| 3 -7 2 1
2 | 6 -1
Again, multiply the divisor, 2, by the number in the second row and write the result below the next coefficient: 2 * (-1) = -2.
Copy code
| 3 -7 2 1
2 | 6 -1 -2
Add the result, -2, to the next coefficient in the first row: 2 + (-2) = 0. Write this value in the second row.
Copy code
| 3 -7 2 1
2 | 6 -1 -2 0
The bottom row represents the coefficients of the resulting polynomial after the synthetic division. The first value, 6, is the coefficient of x^2, the second value, -1, is the coefficient of x, and the third value, -2, is the constant term.
Thus, the quotient of (3x^3 - 7x^2 + 2x + 1) divided by (x - 2) is:
3x^2 - x - 2
Therefore, the quotient is 3x^2 - x - 2.
Learn more about quotient from
https://brainly.com/question/11995925
#SPJ11
The following sets are defined: - C={ companies },e.g.: Microsoft,Apple I={ investors },e.g.JP Morgan Chase John Doe - ICN ={(i,c,n)∣(i,c,n)∈I×C×Z +
and investor i holds n>0 shares of company c} o Note: if (i,c,n)∈
/
ICN, then investor i does not hold any stocks of company c Write a recursive definition of a function cwi(I 0
) that returns a set of companies that have at least one investor in set I 0
⊆I. Implement your definition in pseudocode.
A recursive definition of a function cwi (I0) that returns a set of companies that have at least one investor in set I0 is provided below in pseudocode. The base case is when there is only one investor in the set I0.
The base case involves finding the companies that the investor owns and returns the set of companies.The recursive case is when there are more than one investors in the set I0. The recursive case divides the set of investors into two halves and finds the set of companies owned by the first half and the second half of the investors.
The recursive case then returns the intersection of these two sets of def cwi(I0):
companies.pseudocode:
if len(I0) == 1:
i = I0[0]
return [c for (j, c, n) in ICN if j == i and n > 0]
else:
m = len(I0) // 2
I1 = I0[:m]
I2 = I0[m:]
c1 = cwi(I1)
c2 = cwi(I2)
return list(set(c1) & set(c2))
To know more about intersection visit :
https://brainly.com/question/30722656
#SPJ11
X1, X2, Xn~Unif (0, 1) Compute the sampling distribution of X2, X3
The joint PDF of X2 and X3 is constant within the region 0 < X2 < 1 and 0 < X3 < 1, and zero elsewhere.
To compute the sampling distribution of X2 and X3, we need to find the joint probability density function (PDF) of these two random variables.
Since X1, X2, and Xn are uniformly distributed on the interval (0, 1), their joint PDF is given by:
f(x1, x2, ..., xn) = 1, if 0 < xi < 1 for all i, and 0 otherwise
To find the joint PDF of X2 and X3, we need to integrate this joint PDF over all possible values of X1 and X4 through Xn. Since X1 does not appear in the joint PDF of X2 and X3, we can integrate it out as follows:
f(x2, x3) = ∫∫ f(x1, x2, x3, x4, ..., xn) dx1dx4...dxn
= ∫∫ 1 dx1dx4...dxn
= ∫0¹ ∫0¹ 1 dx1dx4
= 1
Therefore, the joint PDF of X2 and X3 is constant within the region 0 < X2 < 1 and 0 < X3 < 1, and zero elsewhere. This implies that X2 and X3 are independent and identically distributed (i.i.d.) random variables with a uniform distribution on (0, 1).
In other words, the sampling distribution of X2 and X3 is also a uniform distribution on the interval (0, 1).
learn more about constant here
https://brainly.com/question/31730278
#SPJ11
The average time a machine works properly before a major breakdown is exponentially distributed with a mean value of 100 hours.
Q7) What is the probability that the machine will function between 50 and 150 hours without a major breakdown?
Q8) The machine works 100 hours without a major breakdown. What is the probability that it will work another extra 20 hours properly?
The probability that the machine will function between 50 and 150 hours without a major breakdown is 0.3736.
The probability that it will work another extra 20 hours properly is 0.0648.
To solve these questions, we can use the properties of the exponential distribution. The exponential distribution is often used to model the time between events in a Poisson process, such as the time between major breakdowns of a machine in this case.
For an exponential distribution with a mean value of λ, the probability density function (PDF) is given by:
f(x) = λ * e^(-λx)
where x is the time, and e is the base of the natural logarithm.
The cumulative distribution function (CDF) for the exponential distribution is:
F(x) = 1 - e^(-λx)
Q7) To find this probability, we need to calculate the difference between the CDF values at 150 hours and 50 hours.
Let λ be the rate parameter, which is equal to 1/mean. In this case, λ = 1/100 = 0.01.
P(50 ≤ X ≤ 150) = F(150) - F(50)
= (1 - e^(-0.01 * 150)) - (1 - e^(-0.01 * 50))
= e^(-0.01 * 50) - e^(-0.01 * 150)
≈ 0.3935 - 0.0199
≈ 0.3736
Q8) In this case, we need to calculate the probability that the machine functions between 100 and 120 hours without a major breakdown.
P(100 ≤ X ≤ 120) = F(120) - F(100)
= (1 - e^(-0.01 * 120)) - (1 - e^(-0.01 * 100))
= e^(-0.01 * 100) - e^(-0.01 * 120)
≈ 0.3660 - 0.3012
≈ 0.0648
learn more about probability
https://brainly.com/question/31828911
#SPJ11
Let Y have the lognormal distribution with mean 71.2 and variance 158.40. Compute the following probabilities. (You may find it useful to reference the z table. Round your intermediate calculations to at least 4 decimal places and final answers to 4 decimal places.)
The required probabilities are: P(Y > 150) = 0.1444P(Y < 60) = 0.0787
Given that Y has a lognormal distribution with mean μ = 71.2 and variance σ² = 158.40.
The mean and variance of lognormal distribution are given by: E(Y) = exp(μ + σ²/2) and V(Y) = [exp(σ²) - 1]exp(2μ + σ²)
Now we need to calculate the following probabilities:
P(Y > 150)P(Y < 60)We know that if Y has a lognormal distribution with mean μ and variance σ², then the random variable Z = (ln(Y) - μ) / σ follows a standard normal distribution.
That is, Z ~ N(0, 1).
Therefore, P(Y > 150) = P(ln(Y) > ln(150))= P[(ln(Y) - 71.2) / √158.40 > (ln(150) - 71.2) / √158.40]= P(Z > 1.0642) [using Z table]= 1 - P(Z < 1.0642) = 1 - 0.8556 = 0.1444Also, P(Y < 60) = P(ln(Y) < ln(60))= P[(ln(Y) - 71.2) / √158.40 < (ln(60) - 71.2) / √158.40]= P(Z < -1.4189) [using Z table]= 0.0787
Therefore, the required probabilities are:P(Y > 150) = 0.1444P(Y < 60) = 0.078
Learn more about: probabilities
https://brainly.com/question/29381779
#SPJ11
What is the average of M M 1 and M 2?.
The average of the set {M, M₁, M₂} is (M + M₁ + M₂)/3
How to find the average?Remember that if we have a set of elements, to find the average of said set we just need to add all the elements and then divide the sum by the number of elements.
Here we want to find the average of the set {M, M₁, M₂}
So we have 3 elements, the average will just be:
Average = (M + M₁ + M₂)/3
Learn more about average at:
https://brainly.com/question/20118982
#SPJ4