Answer:
F = 15.29[m/s²].
Explanation:
To solve this problem we must use Newton's second law which tells us that the force is equal to the product of mass by acceleration.
ΣF =m*a
where:
m = mass [kg]
a = acceleration = 0.5 [m/s²]
Therefore we must find first the mass.
[tex]W =m*g\\m=W/g\\m = 300/9.81\\m = 30.58 [kg][/tex]
Now replacing in Newton's second law.
[tex]F = m*a\\F = 30.58*0.5\\F=15.29[m/s^{2}][/tex]
Sandra pays $11 for 2.75 pounds of cheese. What is the cost per pound?
$0.40
x
$0.44
$4.00
$4.40
Hi
Answer:
$4.00
Explanation:
The cost per pound is $4.00, $11 divided by 2.75 is 4.
Answer:
Th cost per pound is $4.00.
Explanation:
11/2.75= 4
A model of a helicopter rotor has four blades, each 3.4 m in length from the central shaft to the tip of the blade. The model is rotated in a wind tunnel at 550 rev/min. What is the radial acceleration of the blade tip, expressed as a multiple of the acceleration g due to gravity?
A. (5.72 × 104)g
B. (6.23 × 102)g
C. (1.15 × 103)g
D. (2.25 × 103)g
When is a magnetic force produced in a copper wire?
O A. Whenever the wire is connected to a magnet
B. Whenever the wire is wrapped around an iron bar
C. Whenever there is current in the wire
D. Whenever the wire is coiled
Answer:
ur answer is d
Explanation:
it has to be coiled to give off magnetic energy
Two identical wind-up cars A and B are released. Car B has a 2 kilogram weight strapped to the back of the car. Which will have the greatest average speed towards the end of the motion?
A)Car A
B)They will both have an average speed of zero.
C)They will have the same average speed.
D)Car B
E)There is not enough information to answer.
Answer:
Car A would have a better average speed
Explanation:
added weight to a object that is self propelled will be slower than a identical object with no added weight
Need help ASAP..please help
Answer:
option 3
Explanation:
can i get brainliest
what body parts were scientists wanting to image that prompted the development of the CT scanner
Answer:
The head
Explanation:
why does the current splits in parallel circuit and why does the voltage remains equal?
Voltage:
It is basically the difference between the charges of the materials on the ends of the Wire
also known as potential difference
It is very similar to the movement of air, it moves from higher density to lower density. in this case, the change in density is the potential difference
So, since voltage is the difference between the charge available on the ends of a wire. Even if the wire splits in parallel circuit, the difference of the charges remains the same
the more the potential difference, the faster electrons will move to the material with lower charge
Current:
Current is the amount of electrons moving through a cross-section of a wire in a period of time
So basically, it is the amount of electrons that move across a given point on a wire in a period of time
If the wire splits, we will have the same amount of electrons moving through as they would if the wire was not split but now, the electrons passing are divided and hence, if we measure the current after the split, we will find that we have a lower current
that's because we have less charge moving through the cross-section of the wire since some of those electrons are moving through a different wire
That's why the current splits in a parallel circuit
1. A stone of mass 0.8 kg is attached to a 0.9 m long string. The string will break if the tension exceeds 60 N. The stone is whirled in a horizontal circle on a frictionless tabletop while the other end of the string remains fixed. What is the maximum speed the stone can attain without breaking the string?
A. 8.22 m/s
B. 7.30 m/s
C. 9.34 m/s
D. 7.76 m/s
2. A highway curve with radius 900 ft is banked so that a car traveling at 55 mph will not skid sideways even in the absence of friction. At what angle should the curve be banked to prevent skidding?
A. 14.6°
B. 18.9°
C. 10.9°
D. 12.7°
3. A button will remain on a horizontal platform rotating at 40 rev/min as long as it is no more than 0.15 m from the axis. How far from the axis can the button be placed without slipping if the platform rotates at 60 rev/min?
A. 0.365 m
B. 0.338 m
C. 0.225 m
D. 0.294 m
4. What is the tension in a cord 10 m long if a mass of 5 kg is attached to it and is being spun around in a circle at a speed of 8 m/s?
A. 67 N
B. 28 N
C. 32 N
D. 50 N
5. A 0.5 kg mass attached to a string 2 m long is whirled around in a horizontal circle at a speed of 5 m/s. What is the centripetal acceleration of the mass?
A. 11.3 m/s2
B. 12.5 m/s2
C. 5.9 m/s2
D. 10.2 m/s2
6. Find the maximum speed with which a car can round a curve that has a radius of 80 m without slipping if the road is unbanked and the coefficient of friction between the road and the tires is 0.81.
A. 44.3 m/s
B. 20.8 m/s
C. 25.2 m/s
D. 30.6 m/s
Answer:
1. A. 8.22. m/s
Explanation:
A ball is thrown 24 m/s into the air. How high does it go?
556.4 m
0 m
29.4 m
-556.4 m
Answer:
option c is correct
Explanation:
we know that
2as=vf^2-vi^2
vf=24 m/s
vi= 0 m/s
a=g= 9.8 m/s^2
s=vf^2-vi^2/2a
s=(24)²-(0)²/2*9.8
s=576/19.6
s=29.4 m
therefore option c is correct
Is Geothermal Energy renewable? Why or why not? Use in your own words.
Answer:
Yes, geothermal energy is a renewable energy resource because the water can be heated by pumping it through the rocks.
An 7.40 kg block drops straight down from a height of 0.83 m, striking a platform spring having a force constant of 9.50 102 N/m. Find the maximum compression of the spring.
Answer:
0.25 m.
Explanation:
mass of the block = 7.40 kg, height = 0.83 m, force constant of the spring = 9.50 x [tex]10^{2}[/tex] N/m.
The maximum compression on the spring can be determined by;
Potential energy stored in the spring = [tex]\frac{1}{2}[/tex] K[tex]x^{2}[/tex]
But, potential energy = mgh
So that,
mgh = [tex]\frac{1}{2}[/tex] K[tex]x^{2}[/tex]
7.4 x 9.8 x 0.83 = 9.50 x [tex]10^{2}[/tex] x [tex]x^{2}[/tex]
60.1916 = 9.50 x [tex]10^{2}[/tex] x [tex]x^{2}[/tex]
[tex]x^{2}[/tex]= [tex]\frac{60.1916}{9.50*10^{2} }[/tex]
= 0.06336
x = 0.2517
x = 0.25 m
The maximum compression of the spring is 0.25 m.
A block slides down an inclined plane from rest. Initially the block is at 4.5m above the ground. Find the speed of the block when it is 1.5m above the ground. 1) 7.7m/s 2) 9.4m/s 3) 5.4m/s 4) 3.2m/s
Since, no external force is acting , so the system is in equilibrium .
Initial total energy = Final total energy
[tex]mg(4.5) = mg(1.5) + \dfrac{mv^2}{2}\\\\\dfrac{v^2}{2}=3\times g \\\\v^2=3\times 9.8\times 2\\\\v = \sqrt{58.8}\ m/s\\\\v = 7.67 \ m/s[/tex] ( Here , g = acceleration due to gravity = 9.8 m/s² )
Therefore, option 1) is correct.
Hence, this is the required solution.
When a potential difference of 10 V is placed across a certain solid cylindrical resistor, the current through it is 2 A. If the diameter of this resistor is now tripled, the current will be:______.A) 18 A.
B) 2/3 A.
C) 3 A.
D) 2/9 A.
E) 2 A.
Answer:
sorry I wish I could it help you
(A star if you answer this question) A school bus is traveling at 11.1 m/s and has a
momentum of 152,625 kgm/s. What is the mass of the bus?
[tex]\mathfrak{\huge{\pink{\underline{\underline{AnSwEr:-}}}}}[/tex]
Actually Welcome to the Concept of the Kinematics in real world.
So, as given here, we have to find the Mass of the bus from the given momentum, so we get as,
P = m * V
momentum = mass * velocity
here, P= 152625 kgm/s and v= 11.1 m/s
so substituting we get as,
m = 152625 ÷ 11.1 => 13,750 kg
hence,the mass of the bus is 13,750 kg.
a current of 200 mA through a conductor converts 40 joules of electrical energy into heat in 30 seconds determine the p
otential drop across the conductor
Answer:
ou have I=200mA, E=40J, t=30s, and you want to find the voltage drop.
First, you should know that P=V⋅I , so V=PI
Second, you have the amount of energy converted in a certain amount of time, so E=P⋅t
So, find the power and use it to find the voltage drop.
this works , but i thought energy was defined by W = P * t whitch would then be P = W/t
In principle, when you fire a rifle, the recoil should push you backward. How big a push will it give? Let's find out by doing a calculation in a very artificial situation. Suppose a man standing on frictionless ice fires a rifle horizontally. The mass of the man together with the rifle is 70 kg, and the mass of the bullet is 10 g. If the bullet leaves the muzzle at a speed of 500 m/s, what is the final speed of the man?
Answer:
Explanation:
m1v1=m2v2
m1=70 kg
m2=10 g=0.01 kg
v2=500 m/s
m1v1=m2v2
v1=m2v2/m1
v1=0.01*500/70
v1=0.07
Which computational model can be applied to the total internal energy of a system with two point masses?
{Energy Flows Quick Check}
Answer:
D
Explanation:
Took the test :)
A barge is 10 m wide and 60 m long and has vertical sides. The bottom of the boat is 1.2 m below the water surface. What is the weight of the barge and its cargo, if it is floating in fresh water of density 1000 kg/m^3?
a. 6.8 MN
b. 3.5 MN
c. 6.4 MN
d. 9.5 MN
e. 7.1 MN
Answer:
e. 7.1 MN approx.Explanation:
Step one:
given data
density of water= 1000kg/m^3
the dimension of the barge
width= 10m
length= 60m
depth of the boat in the water= 1.2m
Hence the volume occupied by the boat is
volume=10*60*1.2
volume= 720m^2
Step two:
Required is the weight of the barge
we can first find the mass using the relation
density = mass/volume
mass= density*volume
mass= 1000*720
mass= 720000kg
Step three:
Weight =mg
g=9.81m/s^2
W=720000*9.81
W=7063200N
divided by 10^6
W=7.06MN
W=7.1MN approx.
A car’s brakes decelerate it at a rate of -2.40 m/s2. If the car is originally travelling at 13 m/s and comes to a stop, then how far, in meters, will the car travel during that time?
Answer:
Approximately [tex]35.2\; \rm m[/tex].
Explanation:
Given:
Initial velocity: [tex]u = 13\; \rm m \cdot s^{-1}[/tex].
Acceleration: [tex]a = -2.40\; \rm m \cdot s^{-2}[/tex] (negative because the car is slowing down.)
Implied:
Final velocity: [tex]v = 0\; \rm m \cdot s^{-1}[/tex] (because the car would come to a stop.)
Required:
Displacement, [tex]x[/tex].
Not required:
Time taken, [tex]t[/tex].
Because the time taken for this car to come to a full stop is not required, apply the SUVAT equation that does not involve time:
[tex]\begin{aligned} x &= \frac{v^2 - u^2}{2\, a} \\ &= \frac{{\left(0\; \rm m \cdot s^{-1}\right)}^2 - {\left(13\; \rm m \cdot s^{-1}\right)}^2}{2\times \left(-2.40\; \rm m\cdot s^{-2}\right)} \approx 35.2\; \rm m \end{aligned}[/tex].
In other words, this car would travel approximately [tex]35.2\; \rm m[/tex] before coming to a stop.
A school track team member ran for a total of 15.85 miles in practice over 5 days. How many miles did he average per day?
[tex]{\underline{\pink{\textsf{\textbf{ Answer : }}}}}[/tex]
➡ 15.85/5
➡ 3.17 ans.
Measurements of the radioactivity of a certain isotope tell you that the decay rate decreases from 8255 decays per minute to 3110 decays per minute over a period of 4.50 days.
What is the half-life (T1/2) of this isotope?
Answer:half-life (T1/2) of this isotope =
Explanation:
The number of nuclei of any radioactive substance at a given time is expressed by
Nt = N0e⁻kt
Nt=decay of material at a time t, =3110 decays per minute
N=decays at t=0, 8255 decays per minute
k=constant
Nt=N0e−kt
3110= 8255 e⁻k(4.50)
3110/ 8255=e−k(4.50)
0.3767 = e−k(4.50)
In 0.3767 = -k (4.50)
0.976=-4.5k
k=0.976/4.5
=0.2159
Also we know that t 1/2= time that it takes half the original material to decay.it is related to the rate constant by
T₁/₂=ln 2 / k
Therefore half-life (T1/2) of this isotope
T₁/₂=ln 2/0.2159
T₁/₂=3.12 days
what are the scales of measurement of temperature?
Answer:
There are three temperature scales in use today, Fahrenheit, Celsius and Kelvin. Fahrenheit temperature scale is a scale based on 32 for the freezing point of water and 212 for the boiling point of water, the interval between the two being divided into 180 parts
Answer: I have don't understand this question
Explanation:
1. A spring extends by 10 cm when a mass of 100 g is attached to it. What is the spring constant? (Calculate your answer in N/m)10N/m
2. What will be the extension of this spring if the load is a) 4N and b) 75 g?
Answer:
1) k = 10 [N/m]
2) a-) x = 0.4 [m]
b) x = 0.075 [m]
Explanation:
To be able to solve this type of problems that include springs we must use Hooke's law, which relates the force to the deformed length of the spring and in the same way to the spring coefficient.
F = k*x
where:
F = force [N] (units of Newtons]
k = spring constant [N/m]
x = distance = 10 [cm] = 0.1 [m]
Now, the weight is equal to the product of the mass by the gravity
W = m*g = F
where:
m = mass = 100 [g] = 0.1 [kg]
g = gravity acceleration = 10 [m/s²]
F = 0.1*10 = 1 [N]
Now clearing k
k = F/x
k = 1/0.1
k = 10 [N/m]
2)
a ) if the force is 4 [N]
clearing x
x = F/k
x = 4/10
x = 0.4 [m]
m = 75 [g] = 0.075 [kg]
W = m*g = F
F = 0.075*10 = 0.75 [N]
x = .75/10
x = 0.075 [m]
4. A substance has a density of 0.79 g/cm'. It is soluble in water. List all the possibilities of what it might be How could you determine the actual identity?
Answer:
See explanation
Explanation:
Given that the density of the unknown substance is 0.79 g/cm3 and is soluble in water, the possible substances it could be are;
i) t-butanol
ii) ethanol
iii) 2-propanol
iv) acetone
However, the actual identity of the unknown substance can be obtained by carrying out a boiling point test. The four substances listed above have different boiling points. Hence the boiling point of the unknown substance ultimately discloses its identity.
What is the energy contained in a 0.950 m3 volume near the Earth's surface due to radiant energy from the Sun?
Three moles of a monatomic ideal gas are heated at a constant volume of 1.20 m3. The amount of heat added is 5.22x10^3 J.(a) What is the change in the temperature of the gas?________ ? K(b) Find the change in its internal energy.________ ? J(c) Determine the change in pressure.________ ? Pa
Answer:
A) 140 k
b ) 5.22 *10^3 J
c) 2910 Pa
Explanation:
Volume of Monatomic ideal gas = 1.20 m^3
heat added ( Q ) = 5.22*10^3 J
number of moles (n) = 3
A ) calculate the change in temp of the gas
since the volume of gas is constant no work is said to be done
heat capacity of an Ideal monoatomic gas ( Q ) = n.(3/2).RΔT
make ΔT subject of the equation
ΔT = Q / n.(3/2).R
= (5.22*10^3 ) / 3( 3/2 ) * (8.3144 J/mol.k )
= 140 K
B) Calculate the change in its internal energy
ΔU = Q this is because no work is done
therefore the change in internal energy = 5.22 * 10^3 J
C ) calculate the change in pressure
applying ideal gas equation
P = nRT/V
therefore ; Δ P = ( n*R*ΔT/V )
= ( 3 * 8.3144 * 140 ) / 1.20
= 2910 Pa
A) The change in the temperature of the gas is; ΔT = 139.5 K
B) The change in internal energy of the gas is; ΔU = 5.22 × 10³ J
C) The change in pressure of the gas is; ΔP = 2899.5 Pa
We are given;
Volume of Monatomic ideal gas; V = 1.2 m³
Amount of heat added; Q = 5.22 × 10³ J
number of moles; n = 3
A) To calculate the change in temperature of the monatomic idea gas, we will use formula;
Q = ³/₂nRΔT
Where R is a constant = 8.314 J/mol.K
ΔT is the change in temperature
Making ΔT the subject of the formula;
ΔT = ²/₃(Q/(nR))
ΔT = ²/₃(5.22 × 10³)/(3 × 8.314)
ΔT = 139.5 K
B) Due to the fact that no work was done, then from first law of thermodynamics, we can say that;
ΔU = Q
Thus;
change in internal energy; ΔU = 5.22 × 10³ J
C) The change in pressure will be calculated from the formula;
ΔP = (n*R*ΔT)/V
ΔP = (3 * 8.314 * 139.5)/1.2
ΔP = 2899.5 Pa
Read more at; https://brainly.com/question/14122248
which statement accurately describes the relationship between force and momentum?
A. As the mass of an object increases its momentum increases, and it takes more force to change its motion.
B. As the velocity of an object increases, its momentum decreases and it takes less force to change its motion.
C. As the mass of an object increases its momentum decreases and it takes less force to change it motion
D. As the velocity of an object decreases its momentum increases and it takes more force to change its motion
Answer:
A
Explanation:
just did it
As the mass of an object increases its momentum increases, and it takes more force to change its motion. So, option A.
What is meant by momentum ?Mass in motion is quantified by momentum, which is the measure of the amount of mass in motion.
Here,
Momentum of an object, which is under motion can be defined as the product of the mass and velocity of the object.
Momentum, P = mv
According to Newton's second law, the force is defined as the rate of change of momentum, or the momentum per unit time.
F = dP/dt
So, force is proportional to the amount of momentum imparted on the object.
Therefore, if the mass or velocity of the object increases, it will eventually cause the momentum to be increased and as a result, the force required to exert on the object will increase.
Hence,
As the mass of an object increases its momentum increases, and it takes more force to change its motion. So, option A.
To learn more about momentum, click:
https://brainly.com/question/30677308
#SPJ7
What would happen if there is more male hyenas than female hyenas in a population?
Choices:
Male hyenas will compete to mate with the females.
Some male hyenas will die.
Male hyenas for wait for more females to join the population.
Answer:
Option 1
Explanation:
I always see animals do that
Dolphins rely on echolocation to be able to survive in the ocean. In a 20 °C ocean, a dolphin produces an ultrasonic sound with a frequency of 125 kHz. What is the wavelength of this sound, in meters?While remaining stationary, the dolphin emits a sound pulse and receives an echo after 0.220 s. How far away, in meters, is the reflecting object from the dolphin?
Answer:
wavelength = 0.01 m
distance = 162.8 m
Explanation:
Given that;
Speed of sound in water = 1,480 meters per second
Frequency of ultrasound = 125KHZ
From=
v=λf
v= speed of sound
λ= wavelength of sound
f= frequency of sound
λ= 1,480 ms-1/125 * 10^3 Hz
λ= 0.01 m
From
v = 2x/t
where;
v= velocity of sound in water
x= distance traveled
t = time taken
x = vt/2
x = 1,480 ms-1 * 0.220 s/2
x= 162.8 m
A plane mirror is placed to the right of an object. The image formed by the mirror will be a
real image that appears to be on the right of the mirror.
real image that appears to be on the left of the mirror.
virtual image that appears to be on the right of the mirror.
virtual image that appears to be on the left of the mirror.
Hamish is studying what happens when he sends a sound wave through different mediums, and he records his data in a table.
A 2-column table with 4 rows titled Hamish's Waves. The first column labeled Wave has entries 1, 2, 3, 4. The second column labeled Information has entries liquid, solid, gas, liquid.
Which statement could made about the data collected in Hamish’s table?
Wave 1 will move the fastest.
Wave 2 will move the slowest.
Wave 3 will move the slowest.
Wave 4 will move the fastest.
What is common between transverse waves and longitudinal waves?
Both include an amplitude, crest, and rarefactions
Both move faster at higher temperatures
Both move slower through densely packed molecules
Both include a wavelength from compression to compression
An angle of refraction is the angle between the refracted ray and the
incident ray.
normal.
medium.
boundary.
Answer:
A plane mirror is placed to the right of an object. The image formed by the mirror will be a virtual image that appears to be on the left of the mirror.
Explanation: