Answer:
just divide 22 N by 20 kg to get the acceleration in m/s2
Explanation:
I hope this is right-
I got stuck on this question
Answer it 2n
Explanation:
The brakes of a 2000 kg car apply a force of 250 N to slow down a car as it comes off of an exit ramp. What is the acceleration of the car?
If a ball that is 10 meters above the ground is thrown horizontally at 5.51 meters per second. a. how long will it take for the ball to hit the ground? b. how far will the ball travel in the horizontal direction before it hits the ground?
Answer:
a. t = 1.43 s
b. d = 7.88 m
Explanation:
a. The time of flight can be found using the following equation:
[tex] y_{f} = y_{0} + v_{0_{y}}t - \frac{1}{2}gt^{2} [/tex]
Where:
[tex]y_{f}[/tex]: is the final height = -10 m
[tex]y_{0}[/tex]: is the initial height = 0
[tex]v_{0_{y}}[/tex]: is the initial speed in the vertical direction = 0
g: is the acceleration due to gravity = 9.81 m/s²
By solving the above equation for "t" we have:
[tex] t = \sqrt{\frac{2y_{f}}{g}} = \sqrt{\frac{2*10 m}{9.81 m/s^{2}}} = 1.43 s [/tex]
Hence, the ball will hit the ground in 1.43 s.
b. The distance in the horizontal direction can be found as follows:
[tex] x_{f} = x_{0} + v_{0}t + \frac{1}{2}at^{2} [/tex]
Where:
x₀: is the initial position in the horizontal direction = 0
a: is the acceleration in the horizontal direction = 0 (it is moving at constant speed)
[tex] x_{f} = 5.51 m/s*1.43 s = 7.88 m [/tex]
Therefore, the ball will travel 7.88 m before it hits the ground.
I hope it helps you!
What happens when a pebble lying on the ground is kicked?
A. Energy is completely lost.
B. Energy is created.
C. Energy is destroyed.
D. Energy is transferred.
Answer:
I'm 100% sure it's D. but if it isn't, sorry :(
Science Question: why do astronauts wear organge suits vs white suits
Follow answer please...
Two rocks of masses 5 kg and 10 kg a dropped from rest from a height of 20 m above ground. Ignore all friction and air resistance. Just before
they hit the ground, which statement is true about the rocks?
(A) The value for the acceleration of the 5 kg rock is the same as the value for the 10 kg rock, but their velocity values are different.
(B) The values for the acceleration and velocity of the 5 kg rock are greater than the values for the 10 kg rock.
(C) The values for the acceleration and velocity of the 5 kg rock are less than the values for the 10 kg rock.
(D) The values for the acceleration and velocity of the 5 kg rock are the same as the values for the 10 kg rock.
Answer:
D
Explanation:
F=ma
F of 5 kg rock = 49N
F of 10 kg rock = 98 N
Divide by respective masses to get acceleration, and of course you will get 9.8 m/s^2 for both.
Now, use potential energy equals kinetic energy. mgh=(1/2)mv^2 mass cancels out of the equation, since it's on both sides, so we can stop right there. We have algebraically determined that mass does not affect acceleration or velocity!
Hope this helped.
which of the following is an example of potential energy:
(choose 2)
- a fire
- a book standing still on a shelf in the library
- a printer that is not connected
- your cellphone, when you make a call to someone
Answer:
fire is a potential energy
If the frequency of a wave is 0.25 Hz, what is its period?
A) 0.25 s
B) 2 s
C) 4 s
D) 4 HZ
Answer:
C
Explanation:
frequency = 1 / period
so
frequency = 0.25
0.25 = 1 / period
1 / 0.25 = period
4 s = period
it is not 4 Hz because period is the time taken
so the answer is C
hope this helps ,please mark it
What's a real-life example of Newton's Second Law?
These are the reactant in a chemical equation: 6 CO2 + 6 H2O --> C6H12O6 + 6 O2
Answer:
Carbon Dioxide and Water.
Explanation:
This is the chemical formula for photosynthesis!
What is the object’s average acceleration between 0.0 s and 5.0 s?
ANSWER FAST! PLEASEE
Answer:
[tex]2.5[/tex]
Explanation:
[tex]0.0+5.0=5.0[/tex]
[tex]\frac{5}{2} =2.5[/tex]
hope this helps!!!!!!!!!!
which material would you select to replace broken handle of electric kettle
please will mark as brainlist
Answer:
hot glue
Explanation:
-insert the hot melt cylinder into the gun and wait until it heats up;
-gently apply a layer of substance to the crack;
-spread the hot glue in a thin layer over the surface;
-wait until it freezes.
Choose the correct words from the box to complete the definition of resistance.
current difficulty ease potential difference
The electrical resistance of a material is a measure of the ______________ of passing a ______________ through it.
Answer:
Opposition of passing a electric circuit
A rocket sled accelerates forward from 10 m/s to 50 m/s in 2 seconds. What is the acceleration of the sled?
Answer:
Explanation:
Use kinematics equations
You have Vi=10m/s and Vf=50m/s and t=2s
Use equation Vf=Vo+at 50=10+a(2)
50=10+2a
40=2a
a=20 m/s^2
Which of the following instruments measures time most accurately?
a. Sundial
b. quartz watch
c. pendulum clock
d. watch with balance wheel
Answer:
b) Quartz Clock
Explanation:
It's is a very type of clock which uses the vibration of quartz crystals to measure time accurately
PLEASE HELP ASAP!!!
Answer:
WRITE A ONE PAGE ESSAY TO EXPLAIN THE AUTHOR'S PURPOSE IN WRITING HOM SMART ARE ANIMAL
Explanation:
The Berlin marathon is one of the fastest marathons courses; many world records have been set there. In 2014 Dennis Kimetto ran the 42.195 km in 2 hours, 2 minutes and 5 seconds. what was his average speed?
Answer:
about 2000 klm per min
Explanation:
physics help me pleaseee
Answer:
letter e.
Explanation:
because i know its not too deep
A power source of 6.0 V is attached to the ends of a
capacitor. The charge is 12 C.
(Cr(NH3).](Co(CN)6) is a coordination complex
compound. What is the percent composition of carbon in this
compound?
Answer:19.51%
Explanation:
An archer uses 2000J of energy to pull a bow string 0.15m. What is the force constant (k) of the bow string?
The spring constant of the given bow spring is equal to 1.77 × 10⁵ N/m.
What is Hooke's law?Hooke's law can be described as a law that states that the force (F) required to extend or compress a spring by displacement linearly with respect to that displacement along a straight line.
The spring force can be represented in the form of an equation:
F = -kx
where k is a spring constant of the spring and x is the deformation of the spring. The negative sign shows that force is restoring force.
The energy that can be stored in the spring when it is stretched is given by:
E = (1/2)kx²
Given, the energy stored in the spring when it is stretched, E = 1000J
The distance by which the bow spring is stretched, x = 0.15 m
2000 = (1/2) × k (0.15)²
k = 1.77 × 10⁵ N/m
Learn more about Hooke's law, here:
brainly.com/question/13348278
#SPJ2
A 2-inch, f/4 reflector has a focal length of:
6 inches
8 inches
4 inches
2 inches
Please help!!!!!!!!
Answer:
Option C. 83.8 J
Explanation:
From the question given above, the following data were obtained:
Mass (m) of object = 2 Kg
Velocity (v) of the object = 5 m/s
Height (h) = 3 m
Mechanical energy =.?
Next, we shall determine the kinetic energy of the object. This can be obtained as shown below:
Mass (m) of object = 2 Kg
Velocity (v) of the object = 5 m/s
Kinetic energy (KE) =?
KE = ½mv²
KE = ½ × 2 × 5²
KE = 1 × 25
KE = 25 J
Next, we shall determine the potential energy of the object. This can be obtained as shown below:
Mass (m) of object = 2 Kg
Height (h) = 3 m
Acceleration due to gravity (g) = 9.8 m/s²
Potential energy (PE) =.?
PE = mgh
PE = 2 × 9.8 × 3
PE = 58.8 J
Finally, we shall determine the mechanical energy of the object. This can be obtained as shown below:
Kinetic energy (KE) = 25 J
Potential energy (PE) = 58.8 J
Mechanical energy =?
Mechanical energy = KE + PE
Mechanical energy = 25 + 58.8
Mechanical energy = 83.8 J
In what do electromagnetic waves cause disturbances when they transfer
energy?
A. Electric fields only
O B. Both electric and magnetic fields
C. Neither electric nor magnetic fields
O D. Magnetic fields only
What is the current if a charge of 25 coulombs passes in 5 seconds?
Answer: 5 amps
Explanation: I = Q/t
pls help, i really dw fail :(
Answer:
Using the Newton equation
V²=U² +2as
Given; V=9.2m/s U = 0m/s( because it starts from rest)
S=26.2m.
9.2²=0²+2(26.2)a
a =9.2²/2(26.2)
a=84.6/52.4
a=1.60m/s²
Answer:
2.A
3.D
Explanation:
HOPE THIS HELPS!! :)
Which location, 23 degrees or 48 degrees would experience the same earthquake at stronger intensity?Explain why.
Answer:
48 degress
Explanation:
An earthquake causes many different intensities of shaking in the area of the epicenter where it occurs. So the intensity of an earthquake will vary depending on where you are. Sometimes earthquakes are referred to by the maximum intensity they produce. In the United States, we use the Modified Mercalli Scale. Earthquake intensity is a ranking based on the observed effects of an earthquake in each particular place. Therefore, each earthquake produces a range of intensity values, ranging from highest in the epicenter area to zero at a distance from the epicenter.
What type of Circuit do they use in a home? WHY ? (Simple circuit / Parallel circuit / Series circuit)
Answer:
Parallel Circuits
Explanation:
Loads can be operated on their own. If you had a series circuit, adding another light would dim the rest!
100%
Sutt S
Kam Scheela MARIO MARTINEZ-HTPhysics.pdf
Test BGK
HW#10
Question: A pinball machine's plunger has a spring constant of 22
N/m and is compressed by 0.04 m to start a 0.006 kg pinball.
1. What is the elastic potential energy before the ball is released?
2. What is the kinetic energy of the pinball the instant it leaves the
spring?
3. What is the speed of the pinball the instant it leaves the spring?
4. If the pinball is moving at 1.3 m/s as it is deflected horizontally
across the top of the pinball machine, how much higher above the
ground is this part of its path when compared to its starting
position?
Squation
Drawing
Ta
Signature
Instructions.
Answer:
1. The elastic potential energy is 0.0176 Joules
2. The kinetic energy of the pinball the instant it leaves the spring is 0.0176 Joules
3. The speed of the pinball the instant it leaves the spring is approximately 2.42212 m/s
4. The height of the part where the pinball is located on the machine above the ground is approximately 0.213 meters
Explanation:
The spring constant of the pinball machine's plunger, k = 22 N/m
The amount by which the pinball machine's plunger is compressed, x = 0.04 m
The mass of the pinball ball, m = 0.006 kg
1. The elastic potential energy, P.E. = 1/2·k·x²
By substitution, we get;
P.E. = 1/2 × 22 N/m × (0.04 m)² = 0.0176 J
The elastic potential energy, P.E. = 0.0176 J
2. At the instant the pinball leaves the spring, the plunger and therefore the force of the plunger no longer acts on the pinball
Since there are no external forces acting on the pinball to increase the speed of the pinball after it leaves the spring, the velocity reached is its maximum velocity, and therefore, the kinetic energy, K.E. is the maximum kinetic energy which by the conservation of energy, is equal to the initial potential energy
Therefore;
K.E. = P.E. = 0.0176 J
The kinetic energy of the pinball the instant it leaves the spring, K.E.= 0.0176 J
3. The kinetic energy, K.E., is given by the following formula;
K.E. = 1/2·m·v²
Where;
v = The speed or velocity of the object having kinetic energy K.E.
Therefore, from K.E. = 0.0176 J, and by plugging in the values of the variables, we have;
K.E. = 0.0176 J = 1/2 × 0.006 kg × v²
v² = 0.0176 J/(1/2 × 0.006 kg) = 88/15 m²/s²
v = √(88/15 m²/s²) ≈ (2·√330)/15 m/s ≈ 2.42212 m/s
The speed of the pinball the instant it leaves the spring, v ≈ 2.42212 m/s
4. The height of the pinball is given by the following kinematic equation of motion;
[tex]v_h[/tex]² = u² - 2·g·h
Where;
[tex]v_h[/tex] = The velocity of the pinball at the given height = 1.3 m/s
u = v ≈ 2.42212 m/s (The initial velocity of the pinball as it the spring)
g = The acceleration due to gravity ≈ 9.8 m/s²
h = The height of the pinball above the ground
We get;
[tex]v_h[/tex]² = 1.3² = 2.42212² - 2 × 9.8 × h
∴ h = (2.42212² - 1.3²)/(2 × 9.8) ≈ 0.213
The height of the part where the pinball is located on the machine above the ground, h ≈ 0.213 m
The speed of sound through diamond is about 12,000 m/s. The speed of sound through wood is about 3,300 m/s. Which statement explains
why the speed of sound is different through these materials? (1 point)
Answer: They have different rigidities.
Explanation: