Answer: The partial pressure in atm of ammonium telluride is 1.48 atm
Explanation:
According to Raoult's law, the partail pressure of a component at a given temperature is equal to the mole fraction of that component multiplied by the total pressure
[tex]p_A=x\times p_{total}[/tex]
where, x = mole fraction
[tex]p_A[/tex] = partial pressure of A
[tex]p_{total}[/tex] = total pressure
[tex]x_{\text {ammonium telluride}}=\frac{\text {moles of ammonium telluride}}{\text {total moles}}[/tex],
[tex]x_{\text {ammonium telluride}}=\frac{\frac{2.62g}{164g/mol}}{\frac{2.62g}{164g/mol}+\frac{3.83g}{333g/mol}+\frac{1.82g}{673g/mol}}=0.53[/tex]
[tex]p_{\text {ammonium telluride}}=0.53\times 2.795atm=1.481atm[/tex]
Thus the partial pressure in atm of ammonium telluride is 1.48 atm
1. List 3 physical and chemical phenomena
Answer:
Examples of chemical changes are burning, cooking, rusting, and rotting. Examples of physical changes are boiling, melting, freezing, and shredding. Often, physical changes can be undone, if energy is input.
Hope this helped.
I can determine the molar mass of an element by looking on the Answer under the atomic mass for the element.
Answer:
YES that is the molar mass can be found as the atomic mass of a single atom, BUT when you get to larger molecules your molar mass will be a combination of atomic masses.
Explanation:
can someone help me figure out what the Lewis structure for NCl2−?
Answer:
Chlorine is in group 7A, so it has 7 valence electrons
The Lewis structure for the molecule NCl²⁻ with -2 charge is attached in the image below.
What are Lewis structures?Lewis structures are also called as electron dot structures and can be drawn if the molecular formula of a compound is known. It provides information regarding the nature of bond and the position of atoms .
They are also capable of exhibiting the lone pair if any present in a molecule or compound.Lewis defined a base to be an electron pair donor and an acid to be an electron pair acceptor.
They are capable of reflecting electronic structure of elements and even the pairing of electrons . In the diagram, each dot represents an electron while a pair of dots represent a bond between the atoms.It helps in understanding the bonding between the two atoms.
Learn more about Lewis structures,here:
https://brainly.com/question/20300458
#SPJ5
4 L of He gas is mixed with 2 L of Ne gas. What is the mole fraction of each component?
moles of He=4 L/22.4 L=0.1786 mol
moles of Ne=2 L/22.4 L=0.0893 mol
total moles of the gas mixture
=0.1786+0.0893
=0.2679 mol
mole fraction of He=0.1786 mol/0.2679 mol=0.6667
mole fraction of Ne=0.0893 mol/0.2679 mol=0.3333
In the graphic,
X represents which element?
31
x
15
Answer:
B. X represents phosphorus
Explanation:
In an isotope symbol, you write the mass number above the atomic number. So the 31 represents the mass of the protons and neutrons of the element added together, and the 15 represents the atomic number or the total number of protons in the nucleus.
How many liters would 18.0 grams of water vapor occupy at 273 K and 1.00 atm?
Answer:
22.41 Liters
Explanation:
Using the general law equation;
PV= nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant (0.0821 Latm/molK)
T = temperature (K)
According to the information provided in this question,
mass of water vapor = 18g
Molar mass of water (H2O) = 1(2) + 16 = 18g.
mole = mass/molar mass
- mole (n) = 18/18 = 1mol
V = ?
T = 273K
p = 1 atm
Using PV = nRT
V = nRT/P
V = 1 × 0.0821 × 273/1
V = 22.41 Liters
What mass of methane (CH4) gas occupies a volume of 0,462 L at 1atm and 273K
Explanation:
Since methane gas is at 1 atm and 273 K, it is at standard temperature and pressure(STP).
One mole of every gas occupies 22.4 dm^3 at STP, and vice versa. So,
22.4 dm^3 at STP of CH4=1 mol=12+4(1)=16 g
0.462 L(0.462 dm^3) at STP of CH4
=(16 g×0.462 dm^3)/22.4 dm^3
=0.33 g
Which of the following is a part of the kinetic-molecular theory?
(PLEASE HELP)
Your answer:
Most of the volume of a gas is occupied by gas particles.
The particles of a gas are in constant, random motion.
The average kinetic energy of a gas is dependent upon the identity of the gas.
Gases have indefinite shape and indefinite volume.
Attractive forces between gas molecules must be accounted for with a gas law calculation.
Answer:
2)The particles in a liquid are moving past one another constantly.
3)The particles in gas move freely in all directions.
4)The particles in a solid vibrate in a fixed position.
6)The particles in a gas have few attractions between them.
7)The particles in all states of matter are always moving.
Explanation:
A H2CO3 (aq) ---> CO2 (g) + H2O (l) B H2SO4 (aq) + 2NaOH (aq) ---> Na2SO4 (aq) + 2H2O (l) C 2H2 (g) + O2 (g)----> 2H2O (l) D AgNO3 (aq) + NaOH (aq) ---> AgOH (s) + NaNO3 (aq) Which equation above represents a precipitation reaction?
Answer: [tex]AgNO_3(aq)+NaOH(aq)\rightarrow AgOH(s)+NaNO_3(aq)[/tex]
Explanation:
A double displacement reaction is one in which exchange of ions take place. The salts which are soluble in water are designated by symbol (aq) and those which are insoluble in water and remain in solid form are represented by (s) after their chemical formulas.
A double displacement reaction in which one of the product is formed as a solid is called as precipitation reaction.
The equation which represents a precipiation reaction is:
[tex]AgNO_3(aq)+NaOH(aq)\rightarrow AgOH(s)+NaNO_3(aq)[/tex]
1. Write the word equation for the reaction occurring between lead nitrate and sodium chloride. 2. From your answer in 1 write a balance chemical equation showing all state symbols. 3. Then write the ionic equation for the react ion occurring.
Explanation:
Word Equation
Lead Nitrate + Sodium Chloride --> Lead Chloride + Sodium Nitrate
Balanced Chemical Equation
2 NaCl (aq) + Pb(NO3)2 (aq) → PbCl2 (s) + 2 NaNO3 (aq)
Ionic Equation
In an ionic equation, the aqueous species in the reaction are broken up into ions.
2Na⁺ + 2Cl⁻ + Pb²⁺ + 2NO₃⁻ → PbCl2 (s) + 2Na⁺ + 2NO₃⁻
write the balance equation of ammonium sulfide + aluminum chloride
Answer:
3(NH4)2S + 2AlCl3 → 6NH4Cl + Al2S3
Explanation:
Firstly, ammonium sulfide has a chemical formula of (NH4)2S while aluminum chloride has a chemical formula of AlCl3. These two chemical substances react as follows:
(NH4)2S + AlCl3 → NH4Cl + Al2S3
This chemical equation is however, unbalanced. To balance the chemical equation, one has to ensure that the atoms of each element on both the reactant and product side equates with one another.
If we carefully observe each atom on both the reactants and product side, we will have the following balanced equation:
3(NH4)2S + 2AlCl3 → 6NH4Cl + Al2S3
That is;
- 6 moles of N and Cl on both sides
- 24 moles of H on both sides
- 3 moles of S on both sides
- 2 moles of Al on both sides
Suppose you crushed an antacid tablet before dissolving it in a glass of water. The crushed antacid tablet would:
a. take the same amount of time to dissolve as a whole antacid tablet.
b. dissolve more slowly than a whole antacid tablet.
c. take more time to dissolve than a whole antacid tablet.
d. dissolve more quickly than a whole antacid tablet.
Explanation:
dissolve more quickly than a whole antacid tablet.
Explore: Arrange the matter
from largest to smallest.
Organ
Molecule
Organelle
. Atom
Organism
. Cells
. Tissues
Elements
Answer:
The levels, from smallest to largest, are: molecule, cell, tissue, organ, organ system, organism, population, community, ecosystem, biosphere.
Explanation:
The biological levels of organization of living things arranged from the simplest to most complex are: organelle, cells, tissues, organs, organ systems, organisms, populations, communities, ecosystem, and biosphere.
Answer:
the matter
from largest to smallest.
- organism-organ-organelle-tissue-cell-atom-elements-molecule
If the sun is out all day, why is it not warm during an Arctic summer?
Answer:
The primary reason is that the sun is low on the horizon all day. Thus, solar energy needs to pass through more atmosphere to get to the ground.
Explanation:
Hope this helps. :)
Answer:
Most all of the visible light striking the snow or ice surface is reflected back without any particular preference for a single color. Most natural materials absorb some sunlight, which gives them their color. Clean snow, however, reflects most of the sunlight, creating a white appearance.
[ I commented on the other answer with the same little add-on, then I realised I could add an answer. Even though this is four days ago, meaning the person who asked the question doesn't need another answer, I hope to give someone else who might be looking at this some insight. ]
Sulfur hexafluoride, SF6, is a colorless, odorless, very unreactive gas. Calculate the pressure (in atm) exerted by 2.02 moles of the gas in a steel container of volume 6.21 L at 70 ℃.
Answer:
9.15 atm
Explanation:
Ideal gas equation of state PV=nRT
P in hPa, V in L, n in mol, R is a constant which is 83.1 hpa*L/mol*k, T in kelvin.
Plug in all the number, and we will get:
P*6.21=2.02*83.1*343
P =9271.6(in hpa)=9.15 atm
what are 3 types of mutations
1- Base substitutions.
2- Deletions.
3- Insertions.
A student mixes a dark green solution with water, and the result is pale green. Is this likely a chemical change or not? Explain.
Answer:
This is not a chemical change
Explanation:
The dark green solution mixed with the water, but the water is still water. There were no bubbles, smell, temperature change, or any other signs of a chemical change
Have a great day!
A student mixes a dark green solution with water, and the result is pale green. This is a physical change.
What are physical change and chemical change?Composition distinguishes a physical change from a chemical change. A physical change is a difference inside the look, smell, or straightforward presentation of a material sample without the need for a change in composition, whereas a chemical change alters the makeup of the substances in issue.
Despite the fact that we refer to them as physical "reactions," nothing is actually changing. A change in the substance in question's elemental composition is necessary for a reaction to occur. So, from now on, we will simply refer to bodily "reactions" as physical changes. A student mixes a dark green solution with water, and the result is pale green. This is a physical change.
Therefore, a student mixes a dark green solution with water, and the result is pale green. This is a physical change.
To know more about physical change and chemical change, here:
https://brainly.com/question/11946229
#SPJ2
2Na + 2H2O → 2NaOH+ H2
How many grams of sodium would be needed to produce 1.00kg of sodium hydroxide?
Answer:
575 g
Explanation:
1 kg of sodium hydroxide is 1000/40=25 mol.
So 25 mol of sodium will be needed.
25 mol of sodium is 575 g.
According to the stoichiometry of the given chemical equation, 575 g s of sodium would be needed to produce 1.00 kg of sodium hydroxide.
What is chemical equation?Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.
A plus sign is present between reactants and products if they are more than one in any case and an arrow is present pointing towards the product side which indicates the direction of the reaction .There are coefficients present next to the chemical symbols and formulas .
The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.
46 g sodium gives 80 g sodium hydroxide, thus 1000 g sodium hydroxide requires 46×1000/80=575 g sodium.
Thus, 575 g s of sodium would be needed to produce 1.00 kg of sodium hydroxide.
Learn more about chemical equation,here:
https://brainly.com/question/28294176
#SPJ2
Emma wrote, 'My investigation was good' , as her conclusion.
Philip said this was not a scientific conclusion.
Explain why Emma's conclusion is not scientific
Answer:
Emma's conclusion is not scientific. She is stating an opinion because she thinks her investigation was good which is not necessarily scientific.
The percentage composition of acetic acid is found to be 39.9% C, 6.7% H, and 53.4% O. What is the empirical formula of acetic acid?
Answer:
CH₂O
Explanation:
From the question given above, the following data were obtained:
Carbon (C) = 39.9%
Hydrogen (H) = 6.7%
Oxygen (O) = 53.4%
Empirical formula =?
The empirical formula of acetic acid can be obtained as follow:
C = 39.9%
H = 6.7%
O = 53.4%
Divide by their molar mass
C = 39.9 / 12 = 3.3
H = 6.7 / 1 = 6.7
O = 53.4 / 16 = 3.3
Divide by the smallest
C = 3.3 / 3.3 = 1
H = 6.7 / 3.3 = 2
O = 3.3 / 3.3 = 1
The empirical formula => CH₂O
What is the formula unit for a compound made from Li and Cl? (5 points)
LiCl because the total negative charge on Cl is one.
LiCl because the total negative charge on Li is two.
Li2Cl because the total positive charge on Cl is one.
Li2Cl because the total positive charge on Li is two.
Answer:
LiCl because the total negative charge on Cl is one.
Explanation:
Lithium has a charge of 1+ and Chlorine has a charge of 1-.
There are two types of chemical compound one is covalent compound and other is ionic compound. LiCl because the total negative charge on Cl is one. The correct option is option A.
What is chemical Compound?
Chemical Compound is a combination of molecule, Molecule forms by combination of element and element forms by combination of atoms in fixed proportion.
Covalent compound formed by sharing of electron and ionic compound formed by complete transfer of electron. Ionic compounds are hard, these have higher melting and boiling point than the covalent compounds. Li act as cation Li⁺ and Cl act as Cl⁻. These two combine to form LiCl. LiCl is an ionic compound.
Therefore, LiCl because the total negative charge on Cl is one. The correct option is option A.
To learn more about chemical compound, here:
https://brainly.com/question/26487468
#SPJ5
What does the prefix “geo” mean?
Please Help
I will give you Brainlist
The following symbol (<-->) means
Answer:
Greater than or less than
will gravitational force change based on a change of mass or a change of distance between objects
Answer:
The size of the gravitational force is proportional to the masses of the objects and weakens as the distance between them increases.
Which statement is true regarding nuclear power plants?
The disposal of radioactive wastes is an intended benefit.
Uranium mining is an intended benefit.
Damage caused to the environment is an unintended consequence.
The creation of large amounts of electricity is an unintended consequence.
but its c because it dealing with power
Explanation:
explain why the constellations in the night sky change with the seasons
Answer:
Explanation:
If observed through the year, the constellations shift gradually to the west. This is caused by Earth's orbit around our Sun. In the summer, viewers are looking in a different direction in space at night than they are during the winter.
What is a characteristic of asexual reproduction?
Answer:
Sexual reproduction
Thread-like structures that are found in the nucleus of a cell that contains all DNA.
A.) DNA
B.) Genes
C.) Chromosomes
D.) Nucleus
why do atoms combine to form compund?
Answer:
See below
Explanation:
The following reasons tell why atom combine to form compounds:
1) They want to follow octet or duplet rule and attain the noble gas configuration.
2) They combine to form compounds because of the electrostatic attraction between them.
3) They form compounds to lower their energy and to become stable.
[tex]\rule[225]{225}{2}[/tex]
Hope this helped!
~AH1807a nonliving substance found in earth crust
Answer:
Dirt
mud
rocks
ect.
Explanation: