a substance that is found naturally in the Earth and that does not contain plant or animal matter. Gold is an example.

Answer:

atoms of C? 2.25 x 1022 atoms C x 1 mole C = 0.037 mol C

Explanation:

 How many moles of C are in 2.25 x 1022 atoms of C?

Taking into account the definition of Avogadro's number, 0.037 moles of carbon are 2.25×10²² atoms of carbon.

Avogadro's Number or Avogadro's Constant is called the number of particles that make up a substance (usually atoms or molecules) and that can be found in the amount of one mole of said substance. Its value is 6.023×10²³ particles per mole. Avogadro's number applies to any substance.

Amount of moles of carbons

In this case, you can apply the following rule of three: if 6.023×10²³ atoms are contained in 1 mole of carbon, then 2.25×10²² atoms are contained in how many moles of copper?

amount of moles of carbon= (2.25×10²² atoms × 1 mole)÷ 6.023×10²³ atoms

amount of moles of carbon= 0.037 moles

Finally, 0.037 moles of carbon are 2.25×10²² atoms of carbon.

Learn more about Avogadro's Number:

brainly.com/question/11907018?referrer=searchResults

brainly.com/question/1445383?referrer=searchResults

brainly.com/question/1528951?referrer=searchResults

Answer:

is has around 1/5 lyrics of water

Answer:

[tex]1 \: mole \: = \: 6.02 \times {10}^{23} \: molecules \\ 0.350 \: moles \: = \: (0.350 \times 6.02 \times {10}^{23} ) \: molecules \\ = 2.107 \times {10}^{23} \: molecules[/tex]

Answer:

81 gm

Explanation:

The mass of 1 mole is 27 g

So, Mass of 3 moles of Aluminium would be 3 × 27 = 81 gm..Thus mass of 3 Moles of Aluminium is 81 gm.

Answer:

I had the answer

Explanation:

Moles to particles Now suppose you want to determine how many particles of sucrose are ... Driving Question Board Have students revisit the DQB to remind themselves of the Unit and Module questions.

Answer:

The answer is "Option 2".

Explanation:

Answer:

14.93 g

Explanation:

First we convert 1.2 x 10²³ atoms of arsenic (As) into moles, using Avogadro's number:

Then we can calculate the mass of 0.199 moles of arsenic, using its molar mass:

Thus, 1.2x10²³ atoms of arsenic weigh 14.93 grams.

Answer: The event air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down would most likely take place over the next few minutes.

Explanation:

A process in which heat is evolved is called an exothermic process.

When hot metal plate at [tex]150^{o}C[/tex] is placed in air at room temperature then heat is given off by the metal plate due to which there will occur a decrease in kinetic energy of its molecules.

As a result, molecules in the metal will slow down.

Whereas heat is absorbed by the air molecules from the metal due to which kinetic energy of air molecules will increase.

Thus, we can conclude that the event air molecules that are surrounding the metal will speed up, and the molecules in the metal will slow down would most likely take place over the next few minutes.

Answer:

I think c biological processes

Answer:

3.84 J/g°C

Explanation:

Using the formula as follows:

Q = m × c × ∆T

Where;

Q = amount of heat (J)

m = mass of substance

c = specific heat of copper

∆T = change in temperature (°C).

Based on the provided information;

Q = 43783J

m = 24g

∆T = 500°C - 25°C = 475°C

c = ?

Using Q = m × c × ∆T

43783 = 24 × c × 475

43783 = 11400c

c = 43783 ÷ 11400

c = 3.84 J/g°C

Answer:

C

Explanation:

1atm=760torr

X=250torr

Cross multiply

760torrX=250torr*atm

Divide both sides by 760torr

X=250torr*atm/760torr

X=0.32895atm

X=0.329atm

Option C is collect

Answer: A volume of 50 mL of 10 M HCl must be used to create 100 mL of a 5 M solution.

Explanation:

Given: [tex]V_{1}[/tex] = ?,          [tex]M_{1}[/tex] = 10 M

[tex]V_{2}[/tex] = 100 mL,            [tex]M_{2}[/tex] = 5 M

Formula used to calculate the volume is as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}[/tex]

Substitute the values into above formula as follows.

[tex]M_{1}V_{1} = M_{2}V_{2}\\10 M \times V_{1} = 5 M \times 100 mL\\V_{1} = 50 mL[/tex]

Thus, we can conclude that a volume of 50 mL of 10 M HCl must be used to create 100 mL of a 5 M solution.

Answer:

Plastics!!!!!

Explanation:

How do you print stone or honey or wood you melt plastic or filiment to print stuff

Answer:

Explanation:

The density is  

1.1 g c m 3 .

Answer:

H2(g)+I2(s)→2HI(s)

Explanation:

Hello there!

In this case, according to the given information and unbalanced chemical reaction, we infer it must be balanced in agreement with the law of conservation of mass because the reactants side has two hydrogen and iodine atoms whereas the products side has just one. In such a way, by placing a 2 on HI, we obtain the following balanced reaction:

H2(g)+I2(s)→2HI(s)

Regards!

Wilma- tt

Wilbur- TT

c) 100% chance

d) 100% chance

it has been a while since I've done this so it could be wrong but im pretty sure its correct

Wilbur's family claims it is pure so they have TT

and his wife simply has big eyes so its tt

so the chances of their children having either eye shape is 100%

I'm sorry- im not too good at explaining it ><

Answer:

0.10 L

Explanation:

First we convert the 2.0 grams of solute (meaning sodium hydroxide) into moles, using its molar mass:

Then we can calculate the required volume of solution, using the definition of molarity:

Answer:

True

Explanation:

Diffusion is the movement of the particles of a substances from a region of higher concentration to a region of lower concentration.

Diffusion occurs in response to a concentration gradient.

In this case, the dye is at a higher concentration at the middle of the shallow dish of water. Diffusion causes the dye to spread out gradually thereby causing the red cloud to grow larger with time.

We have that the statement that explains why NaCl dissolves in water even though the process is endothermic the given as,

Option A

Generally ,Sodium chloride  is crystalline salt, when  its dissolved is H20 , it dissociates its ion, the ions are scattered through out the solution which results in increased  in randomness .

Therefore, the entropy increases when NaCl dissolves in water,

Option A

For more information on Heat visit

https://brainly.com/question/15267055

Answer:

its e

Explanation:

Answer:

a. 2.44 nm

b. 15.33 nm²

Explanation:

a. Calculate the thickness (in nm) of the surface film

Since the volume of a teaspoon equals V = 4.93 cm³ and the area of the oil film is half an acre = 1/2 × 4046.86 m² = 2023.43 m²

The volume of the oil film, V' equals the volume of the oil in the teaspoon, V

V' = Ah where A = cross-sectional area of oil film = 2023.43 m² = 2023.43 × 10⁴ cm² and h = height of oil film

So, V' = V

Ah = V

h = V/A

= 4.93 cm³/2023.43 × 10⁴ cm²

= 0.00244 × 10⁻⁴ cm

= 2.44 × 10⁻⁷ cm

=  2.44 × 10⁻⁷ cm × 1m/100 cm

= 2.44 × 10⁻⁹ m

= 2.44 nm

b. The surface area (in nm2) occupied by an oleic acid molecule on water.

Since the height of the oil film equals the diameter of the oil molecule, and the molecule is assumed to be a sphere of radius, r. Its surface area is thus A = 4πr²

r = h/2 = 2.44 nm/2 = 1.22 nm

A = 4πr²

A = 4π(1.22 nm)²

A = 4.88π nm²

A = 15.33 nm²

When Magnesium comes in contact with Oxygen, it reacts with Oxygen causing a layer of Magnesium Oxide on the metal. If Magnesium is burnt, it will cause a bright white light creating Magnesium Oxide.

The initial appearance of Magnesium is a ribbon with a layer of Magnesium Oxide.

Happy to help :)

If you need any more help feel free to ask

Answer:

20 moles of Iron are needed

Explanation:

In 1 mole of Iron (III) oxide, Fe₂O₃, there are 2 moles of Iron, Fe. The equation that we can write is:

2 moles Fe = 1 mole Fe₂O₃

To find the moles of iron that are needed to produce 10 moles of Fe₂O₃ we must use this equation as follows:

10 moles of Fe₂O₃ * (2 moles Fe / 1mole Fe₂O₃) =

Answer:

Climate change will make plants—and us—thirstier. The combined effects of increased CO2 levels and warmer temperatures will increase water consumption by vegetation. That will lead to water declines in streams and rivers like the Ashepoo River in South Carolina

Explanation:

Answer:

See Explanation

Explanation:

We can write the molecular orbital configuration of molecules in the same way as we write the orbital electron configuration of atoms. The valence electrons in the molecule are filled into molecular orbitals of appropriate energy in accordance to the Aufbau principle.

For CO;

σ2s2, σ*2s2, Π2py2, Π2pz2, σ2px2

For NO;

σ2s2, σ*2s2, Π2px2, Π2py2, σ2pz2, Π*2px1

For CN-;

σ2s2, σ*2s2, Π2px2, Π2py2, σ2pz2

These are the ground state electron configurations of these molecules.

Answer:

13

Explanation:

1 proton/neutron has an atomic mass of 1. We ignore the electrons because they are too small. Protons and Neutrons have the same atomic mass, therefore the answer s 6+7=13

Answer:

1) 1.5 kg

2) 0.6 kg

Explanation:

[tex](3)(30) = 60m, m = 90/60 = 1.5[/tex] kg

[tex](0.8)(15) = 20m, m = 12/20 = 0.6[/tex] kg

Explanation:

E=(98-15)×400×4.2

E=139440J

t=E/P

E=139440/500=278.88s

hope it helps❣️

don't forget to mark me as brainliest and follow❣️

Answer:

[Ba²⁺] = 1.58 × 10⁻³ M

[Cl⁻] = 3.16 × 10⁻³ M.

Explanation:

Step 1: Calculate the molar concentration of BaCl₂

We have 3.50 mL (V₁) of a 0.00450 M (C₁) BaCl₂ solution and we dilute it to a final volume of 10.00 mL (V₂). We can calculate the final concentration of BaCl₂ by using the dilution rule.

C₁ × V₁ = C₂ × V₂

C₂ = C₁ × V₁ / V₂

C₂ = 0.00450 M × 3.50 mL / 10.00 mL = 1.58 × 10⁻³ M

Step 2: Calculate the molar concentrations of the Ba²⁺ and Cl⁻ ions

Let's consider the dissociation of BaCl₂.

BaCl₂(aq) ⇒ Ba²⁺(aq) + 2 Cl⁻(aq)

The molar ratio of BaCl₂ to Ba²⁺ is 1:1. The molar concentration of Ba²⁺ is 1/1 × 1.58 × 10⁻³ M = 1.58 × 10⁻³ M.

The molar ratio of BaCl₂ to Cl⁻ is 1:2. The molar concentration of Cl⁻ is 2/1 × 1.58 × 10⁻³ M = 3.16 × 10⁻³ M.