16) What is the acceleration of an object with a mass of 31.5 kg when an unbalanced force
of 223 N is applied to it?
Answer:
a= 7.07 m/s^2
Explanation:
Newton's second law of motion states that the acceleration of an object is produced by the net force.
the formula to calculate the force: F=ma
you just rearrange it to solve for a
a= F/m a=223/31.5
=7.07
Answer the question in image attached
Thanks!
Answer: i think the 3,4,2
Explanation:
Answer:
i think its 2, 3 and 4
ionic and molecular compounds, polyatomic ions, ch chemical equations
A gas has a volume of 465. mL at 725 mmHg of pressure. What
will be the pressure if the volume increases to 841 mL?
Answer:688
Explanation:
2
Phosphorus trioxide (P302) and
phosphorus pontoxide (P20s) are
examples where phosphorus atoms
may bond in different ratios with
oxygen and thus have different
valencies. Give the valency of
phosphorus in P20, and P2Os. As
usual, take the valency of oxygen
as -2
Answer:
Check the answer from QUIZLET!
What is the difference between light photons and infrared photons?
Answer:
Light Photons: Light behaves mainly like a wave but it can also be considered to consist of tiny packages of energy called photons. Photons carry a fixed amount of energy but have no mass. The energy of a photon depends on its wavelength: longer wavelength photons have less energy and shorter wavelength photons have more.
Infrared photons: Infrared waves, or infrared light, are part of the electromagnetic spectrum. People encounter Infrared waves every day; the human eye cannot see it, but humans can detect it as heat. A remote control uses light waves just beyond the visible spectrum of light—infrared light waves—to change channels on your TV.
On the electromagnetic spectrum, visible light has a wavelength that falls between 380 nm and 750 nm, whereas infrared light, which marks the beginning of the non-visible spectrum, has a wavelength that falls between 700 nm and 1 mm. Because of this, infrared can only be viewed with specialized tools like security cameras.
What is infrared light ?A type of radiant energy that we experience as heat, but that is invisible to human eyes is infrared radiation (IR), often known as infrared light. The sun and fire are two of the most prominent sources of IR radiation, however all objects in the cosmos release some of it.
The energy of the photons determines the various types of radiation, starting with radio waves with low energies. In comparison to visible, ultraviolet, X-ray, and gamma ray photons, which are the most energetic of all, microwave photons have somewhat higher energy. Infrared photons have even more energy.
Cooler objects produce lower energy, longer wavelength photons, while hotter ones release higher energy, shorter wavelength photons.
Thus, On the electromagnetic spectrum, visible light has a wavelength that falls between 380 nm and 750 nm, whereas infrared light.
To learn more about infrared light, follow the link;
https://brainly.com/question/7071188
#SPJ2
A few Critical Thinking questions/creativity on the topic 'Particles of matter are very small'
Answer:
Any substance which occupies space and has mass is known as matter. States of matter: Matter exist in three different states that are Solid, Liquid and Gas. Matter is made up of very small particles
Explanation:
In sexual reproduction, if each chromosome in a pair has the same genes, how is genetic variety possible?
Answer:
The same genes or slightly different versions of the same gene can be found on each chromosome in a pair. They form a line and split off bits of themselves, which they barter with one another. In sexual reproduction, crossing over is the first method that genes are shuffled to develop genetic variation.
A) 400 gramos de disolución al 6 % m/m. R: 24 g sto. Y 376 g ste. b) 56 gramos de disolución al 30 % m/m. R: 16,8 g y 39,2 g c) 450 gramos de disolución al 10 % m/m R: 45 g y 405 g d) 200 gramos de disolución al 5 % m/m R: 10 g y 190 g e) 450 gramos de disolución al 20 % v/v R: 90 mL y 360 mL f) 980 mL de disolución al 25 % v/v R: 245 mL y 735 mL. g) 50 mL de disolución al 30 % v/v R: 15 mL y 35 Ml
Answer:
A) 24g soluto y 376g solvente.
B) 16.8g soluto y 39.2g solvente
C) 45g soluto y 405g solvente
D) 10g soluto y 190g solvente
E) 90mL soluto y 360mL solvente
F) 245mL soluto y 735mL solvente
G) 15mL soluto y 35mL solvente
Explanation:
El porcentaje masa/masa (% m/m) se define como la masa de soluto presente en 100g de solución (Soluto + solvente).
De la misma manera, el porcentaje volumen/volumen se define como el volumen de soluto en 100mL de solución:
A) 400 gramos de disolución al 6 % m/m.
400g solución * (6g soluto / 100g solución) = 24g soluto
400g solución - 24g soluto = 376g solvente
b) 56 gramos de disolución al 30 % m/m.
56 gramos de disolución al 30% m/m.
56g solución * (30g soluto / 100g solución) = 16.8g soluto
56g solución - 16.8g soluto = 39.2g solvente
c) 450 gramos de disolución al 10 % m/m
450 gramos de disolución al 10% m/m.
450g solución * (10g soluto / 100g solución) = 45g soluto
450g solución - 45g soluto = 405g solvente
d) 200 gramos de disolución al 5 % m/m
200 gramos de disolución al 5% m/m.
200g solución * (5g soluto / 100g solución) = 10g soluto
200g solución - 10g soluto = 190g solvente
e) 450 mL de disolución al 20 % v/v
450 mL de disolución al 20% m/m.
450 mL * (20mL soluto / 100mL solución) = 90mL soluto
450mL solución - 90mL soluto = 360mL solvente
f) 980 mL de disolución al 25 % v/v
980 mL de disolución al 25% m/m.
980 mL * (25mL soluto / 100mL solución) = 245mL soluto
980mL solución - 245mL soluto = 735mL solvente
g) 50 mL de disolución al 30 % v/v
50 mL de disolución al 30% m/m.
50 mL * (30mL soluto / 100mL solución) = 15mL soluto
50mL solución - 15mL soluto = 35mL solvente
What happens to a catalyst used in a reaction?
O A. It is unchanged by the reaction.
OB. It is bonded to the products.
O c. It is broken up by the reactants.
O D. It is used up in the reaction.
help asap very appreciated
A catalyst used in a reaction remains unchanged
I have a flask filled with water and on top a stopper .
I heat it over a flame .
after some time what will happen to the stopper
Answer:
A vacuum flask (also known as a Dewar flask, Dewar bottle or thermos) is an insulating storage vessel that greatly lengthens the time over which its contents remain hotter or cooler than the flask's surroundings. Invented by Sir James Dewar in 1892, the vacuum flask consists of two flasks, placed one within the other and joined at the neck. The gap between the two flasks is partially evacuated of air, creating a near-vacuum which significantly reduces heat transfer by conduction or convection.

The typical design of a Thermos brand vacuum flask, used for maintaining the temperature of fluids such as coffee.

Laboratory Dewar flask, Deutsches Museum, Munich

Diagram of a vacuum flask

A cryogenic storage dewar of liquid nitrogen, used to supply a cryogenic freezer
Vacuum flasks are used domestically, to keep beverages hot or cold for extended periods of time, and for many purposes in industry.
pls make me as brainliest
Two beakers each contain 200 mL of water. Into one beaker, a student adds 5.0 g NaI. Into the other, she adds 5.0 g of KI. What is the expected effect on the boiling points of the solutions?A) the NaI solution will have a higher boiling point than the KI solutionB) the KI solution will have a higher boiling point than the NaI solutionC) the boiling points of both solutions will be elevated to the same temperature, above 100 degrees CelsiusD) the boiling points of both solutions will remain at 100 degrees Celsius
Answer:
A) the NaI solution will have a higher boiling point than the KI solution
Explanation:
We must have it behind our minds that the addition of a solute to water elevates the boiling point of water.
Boiling point elevation is a colligative property. It depends on the amount of solute present.
We know that;
ΔTb = Kb m i
Where;
ΔTb = boiling point elevation
Kb = boiling point constant
m = molality
i = Van't Hoff factor
Since KI and NaI has the same number of particles(two particles each), the boiling point elevation (ΔTb) depends on the molality of each solution. The molality also depends on the molar mass of each substance. The molality of NaI is greater than the molality of KI hence the boiling point NaI is greater than the boiling point of KI.
So;
200mL of water = 200g of water
Mass of solvent = 200g/1000 = 0.2 Kg
Molality of NaI = 5g/150 g/mol * 1/0.2 = 0.167 m
molality of KI = 5g/166 * 1/0.2 = 0.151 m
Kb for water = 0.512 oC m-1
Boiling point of water = 100 oC
Let the boiling point of NaI be A
A - 100 = 0.512 * 0.167 * 2
A = (0.512 * 0.167 * 2) + 100
A = 100.171 oC
Let the boiling point of KI be B
B - 100 = 0.512 * 0.151 * 2
B = (0.512 * 0.151 * 2) + 100
B = 100.154 oC
Hence;
Boiling point of NaI > Boiling point of KI
Find the hydroxide ion concentration [OH-] of an HCl solution with a pH of 6.93.
Answer:
[OH-] = 1.8 x 10^-7
Explanation:
pH + pOH = 14 --> 6.93 + pOH = 14 *subtract 6.93 from both sides
pOH = 7.07
-->
10^pH => 10^-6.93 => 1e - 6.93 [H+]
-->
H+ x OH- = 1 x 10^-6.93 *divide H+ from both sides
-->
[OH-] = 1.17 x 10^-7 or 1.8 x 10^-7
_S8+_O2=_SO2
please help balance
Answer:
S8+8o2 = 8so2
this is balance d
Calculate the decrease in temperature when 7.00 L at 21.5 °C is compressed to 4.00 L. The pressure remains constant at 101.3 kPa.
Explanation:
[tex] \frac{P _{1} V _{1} }{T _{2}} = \frac{P _{2} V _{2}}{T _{1}} \\ \frac{(101300 \times 7)}{(21.5 + 273)} = \frac{(101300 \times 4)}{T _{2}} \\ T _{2} = \frac{(405200 \times 294.5)}{(709100)} \\ T _{2} = 168.3 \: kelvin \\ decrease \: in \: temperature = (294.5 - 168.3) \\ = 126.2 \: kelvin[/tex]
What two things combine with oxygen to form ground-level ozone?
A) NOx and ODS
B) CFCs and halons
C) NOx and VOC
D) HFCs and HCFCs
Answer:
c) NOx and VOC
oxides of nitrogen (NOx) and volatile organic compounds (VOC)
Explanation:
-
Tides are the rise and fall of surface levels of Earth's ocean water caused by the gravitational effects of which two celestial objects?
A)stars and planets
B)comets and meteors
C)earthquakes and volcanoes
D)moon and sun
Answer:
D)Moon and sunExplanation:
Because the gravitational pull of the moon is weaker on the far side of the Earth, inertia wins, the ocean bulges out and high tide occurs.
hope it helps:)
what has changed in the atmosphere that give the rock strata the appearance of rust?(red/orange color).
Answer:
Explained below.
Explanation:
What has changed in the atmosphere is that oxidation has occurred where an oxidizing chemical specie has reacted with an oxygen containing compound.
Now these chemicals when they react with rain and fall on rocks react with the rocks to weaken them in a process known as chemical weathering.
Now when this weathering from the oxidizing chemicals from the rain react with rocks that contain iron, it leads to the rock having an appearance of rust.
Name the planet: Until recently, this stormy, blue-colored planet had a great dark spot on it, which was a high pressure cyclone.
Answer:
Explanation:
THE PLANET NAME IS NEPTUNE
Please help no links
Ms. Daly had Hydrogen gas that was cooled from 100 °C to 50.5°C. The new volume was 20 L. What was its original volume?
20.
50.
Answer:
23 L
Explanation:
We'll begin by converting celsius temperature to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = 100 °C
Initial temperature (T₁) = 100 °C + 273
Initial temperature (T₁) = 373 K
Final temperature (T₂) = 50.5 °C
Final temperature (T₂) = 50.5 °C + 273
Final temperature (T₂) = 323.5 K
Finally, we shall determine the initial volume of gas. This can be obtained as follow:
Initial temperature (T₁) = 373 K
Final temperature (T₂) = 323.5 K
Final volume (V₂) = 20 L
Initial volume (V₁) =?
V₁/T₁ = V₂/T₂
V₁ / 373 = 20 / 323.5
Cross multiply
V₁ × 323.5 = 373 × 20
V₁ × 323.5 = 7460
Divide both side by 323.5
V₁ = 7460 / 323.5
V₁ = 23 L
Thus, the original volume of the gas is 23 L
-Carbon and Oxygen combine to from carbon dioxide
Answer:
Carbon and oxygen combine to form two oxides, carbon monoxide and carbon dioxide in which the ratio of the weights of carbon and oxygen is respectively 12:16 and 12:32.
What is the major difference, in terms of weathering type, between Albany, NY and Washington, D.C.? What might explain this difference?
The breakdown or dissolution of rocks and minerals of the planet's surface is called weathering it can be chemical, biological or physical.
Chemical weathering occurs in regions with high rainfall and high temperature.
In Albany, NY the temperature is 9°C with 98 cm rainfall while in Washington, DC the temperature is 15°C with 111 cm rainfall that is Washington is hotter compared to Albany so it will have chemical weathering.Water (rainfall) and temperature is the main cause of weathering as they loosen and breaks the mineral of rock surfaces.The rocks and minerals get dissolved in the water bodies because of erosion by which they get carried in oceans.Therefore, Albany will have mechanical while Washington will suffer from chemical weathering.
To learn more about weathering types follow the link:
https://brainly.com/question/516958
When patterns of stars appear to move across the sky, it provides evidence that ________.
A. Earth and stars move together
B. Earth rotates in space
C. patterns of stars can change
D. stars actually move
Answer:
Answered B
Explanation:
The earth moves which makes the stars and everything in space seem like its moving
2AgNO3 (aq) + BaCl2 (aq)
-->
2AgCl (s) + Ba(NO3)2 (aq)
2AgCl (s) + Ba(NO3)2 (aq)
Which statement about hydrocarbons is FALSE?
a
The number one use of hydrocarbons is as a fuel
source.
b
Most hydrocarbons we use today come from
sustainable, renewable sources.
с
Hydrocarbons are useful in industries from
transportation to road work to cosmetics.
d
The bulk of hydrocarbons we use today were
formed hundreds of millions of years ago.
Answer:
b
Explanation:
Hydrocarbons provide 84% of the world's energy, but they are non-renewable. Hydrocarbons are the most economic form of energy.
What is the pH of 0.0030 M NaOH
Answer:The pH of 0.0030 is 12.7.
Explanation:NaOH is a very storng base that it is dissociate.
Answer:
The pH is about 12.7.
Explanation:
Which solenoid would be likely to pick up more paperclips? Use what you have learned about electromagnets and solenoids to explain your reasoning.
Answer:
Solenoid having iron core.
Explanation:
Solenoid having iron core will pick up more paperclips because this solenoid will produce more electromagnetism. Solenoid having no iron core produces lower magnetic field as compared to solenoid having iron core. The presence of iron in the core of solenoid increases magnetic field which leads to increase in electromagnetism so that's why the solenoid with iron core attract more paperclips as compared to no iron core solenoid.
Please help i forgot how to do this
Answer:
2 significant figures
Explanation:
0.19312
0.19 or 0.2
If 20. milliliters of 1.0 M HCl was used to completely neutralize 40. milliliters of an NaOH solution, what was the molarity of the NaOH solution?
A) 0.50 M B) 2.0 M C) 1.5 M D) 4.0 M
Answer:
a)0.50
Explanation:
took one for the team :
So3+H2o→H2 So4
identify the nature of this reaction
helpp please i'm such a failure
THE REACTION IS COMBINATION REACTION!
What moon phase happens 2 weeks after this moon phase?
First Quarter
O Full Moon
Last Quarter
New Moon