The student would have success in experiment with using copper in a closed circuit as it allows conduction and is a good conductor of electricity.
What is conduction?Conduction is defined as a process as a means of which heat is transferred from the hotter end of the body to it's cooler end.Heat flows spontaneously from a body which is hot to a body which is cold.
In the process of conduction,heat flow is within the body and through itself.In solids the conduction of heat is due to the vibrations and collisions of molecules while in liquids and gases it is due to the random motion of the molecules .
When conduction takes place, heat is usually transferred from one molecule to another as they are in direct contact with each other.There are 2 types of conduction:1) steady state conduction 2) transient conduction.According to the type of energy conduction is of three types:
1) heat conduction
2) electrical conduction
3)sound conduction
Learn more about conduction,here:
https://brainly.com/question/12136944
#SPJ2
which type of rection has the general formuial ab+cd
The process through which professional scientists evaluate the quality of each other’s research is called
group counsel.
group review.
peer counsel.
peer review.
Answer:
peer reveiw
Explanation:
Answer:
Peer review.
Explanation: Ask Edu
How much heat would be required to convert 5.31 mol of a pure substance from a liquid at 40.0°C to a gas at 113.0°C?
Answer:
Q = 7.7 KJ
Explanation:
The complete question carries the following data:
Specific Heat Capacity of Liquid State = C(l) = 1.45 J/mol.°C
Specific Heat Capacity of Gaseous State = C(g) = 0.65 J/mol.°C
Boiling Temperature = Tb = 88.5°C
Heat of Vaporization = ΔH(vap) = 1.23 KJ/mol
Now, first we calculate the heat required (Q₁) to raise he temperature to boiling point:
Q₁ = n*C(l)*ΔT₁
where,
n = no. of moles = 5.31 mol
ΔT₁ = Temperature difference from 40°C to Tb = 88.5°C - 40°C = 48.5°C
Therefore,
Q₁ = (5.31 mol)(1.45 J/mol.°C)(48.5°C)
Q₁ = 373.4 J = 0.37 KJ
Now, we calculate the heat required (Q₂) to change its phase:
Q₂ = nΔH(vap)
Q₂ = (5.31 mol)(1.23 KJ/mol)
Q₂ = 6.53 KJ
Now, we calculate the heat required (Q₃) to raise he temperature to boiling point:
Q₃ = n*C(g)*ΔT₃
where,
n = no. of moles = 5.31 mol
ΔT₃ = Temperature difference from Tb to 113°C = 113°C - 88.5°C = 24.5°C
Therefore,
Q₃ = (5.31 mol)(0.65 J/mol.°C)(24.5°C)
Q₃ = 84.5 J = 0.08 KJ
So, the total heat required to convert 5.31 mol of this pure substance from a liquid at 40°C to a gas at 113°C is:
Q = Q₁ + Q₂ + Q₃
Q = 0.37 KJ + 6.53 KJ + 0.08 KJ
Q = 7.7 KJ
The total heat required to convert the pure substance from liquid to gas at the given temperature is 814 J.
The given parameters;
molar heat capacity of liquid, C(l) = 1.45 J/mol.⁰Cmolar heat capacity of gas, C(g) = 0.65 J/mol.⁰CThe total heat required to convert the pure substance from liquid to gas at the given temperature is calculated as follows;
[tex]Q = nc_l \Delta \theta + nc_g \Delta \theta \\\\ \Delta \theta = (113 - 40) = 73^0 C \\\\Q = (5.31 \ mol \times 1.45 \frac{J}{mol .\ ^0C} \times 73\ ^0C) + (5.31 \ mol \times 0.65 \frac{J}{mol .\ ^0C} \times 73 \ ^0C)\\\\Q = 814 \ J[/tex]
Thus, the total heat required to convert the pure substance from liquid to gas at the given temperature is 814 J.
"Your question is not complete, it seems to be missing the following information;"
How much heat would be required to convert 5.31 mol of a pure substance from a liquid at 40.0°C to a gas at 113.0°C? (molar heat capacity of liquid, C(l) is 1.45 J/mol.⁰C and molar heat capacity of gas, C(g) is 0.65 J/mol.⁰C).
Learn more here:https://brainly.com/question/8428922
which body system carries oxygen, glucose and amino acids to all the cells of the body?
Answer:
Blood
Explanation:
This flows through the body so it gives it all over.
What mass of solute should you measure out in order to make 1,000 mL of a 0.3 M solution of magnesium phosphate Mg3(PO4)2?
Hey there !
Molecular Weight: 262.86 g/mol
Volume in liters : 1,000 mL => 1,000 / 1000 => 1 L
Number of moles of solution :
number of moles = volume x molarity
number of moles = 1 x 0.3 => 0.3 moles
Therefore:
1 mole Mg₃(PO₄)₂ ------------------- 262.86 g
0.3 moles ----------------------------- mass of Mg₃(PO₄)₂ ??
mass of Mg₃(PO₄)₂ = 0.3 x 262.86 / 1
mass of Mg(PO₄)₂ => 78.858 g
Hope this helps!
Will give brainliest, Look at the graph above. Compare it to the periodic table. What do you notice about the location on the periodic table of the elements that represent the high points
Answer:
We can see that the atomic radius decreases across every row.
Explanation:
I will comment more below.
The elements that represent the highest points on the graph are all elements of group 1 and occur at the head of the period to which they belong.
The periodic table is an arrangement of elements in groups and periods. The elements in the same group have the same number of valence electrons while the elements in the same period have the same number of shells.
Looking at the graph, we can see that the high points in the graph all correspond to the group 1 elements; sodium, potassium, rubidium and cesium.The have the highest atomic radii in the period. Atomic radii increases down the group but decreases across the period. Remember that these elements are at the head of the period to which they belong hence they have the highest atomic radii.
Learn more: https://brainly.com/question/9352088
How and why was the periodic table set up?
every spring has an equilibrium position which statement describe a spring at it equilibruim position?
What's the molar mass of CoCl
Answer:129.839 g/mol
Explanation:
Is it A, B, C, or D?????
please help!!!!
Answer:
d
Explanation:
Answer:
Its d
Explanation:
Ik you already know this, I just wanted the points tbh
17. Which is a fat-soluble vitamin?
O vitamin B
O vitamin C
O vitamin A
plzzzzz Plzzz Wil givr brainleast which type of weathering causes the mineral composition of rocks to change
Answer:
Chemical
Explanation:
Cause it is
C is the element symbol for which element?
a. Carbon
b. Cadmium
c. Celenium
d. Chlorine
Answer:
A) Carbon
Explanation:
the others are wrong its A
Answer:
A) carbon
Explanation:
carbon or simply c has an atomic number of 6 and it has an atomic mass of 12.01 amu. it belongs to group 4a
When given the following: density = 0.79 g/mL and mass =8g (answer can be found in your reading) What is the volume of the object?
HELP ASAP!!!!!!!!!!!!!
Answer:
V = 10.12 mL
Explanation:
Given that,
Density, d = 0.79 g/mL
Mass, m = 8 g
We need to find the volume of the object. Density is equal to the mass per unit volume. It can be given by :
[tex]d=\dfrac{m}{V}[/tex]
Where V is the volume of the object
[tex]V=\dfrac{m}{d}\\\\=\dfrac{8\ g}{0.79\ g/mL}\\\\V=10.12\ mL[/tex]
So, the volume of the object is 10.12 mL.
PLEASEEEEEEEEE HELP WILL GIVE BRAINLIST
Which parts of the muscular and skeletal system work together to move muscles and bones?
arteries and vessels
tendons and ligaments
esophagus and intestine
nerves
Answer:
Tendons and ligaments
Explanation:
Tendons connect the skeletal system to the muscular system by attaching muscle to bone.
I need the answer multiple choice
Answer:
it's answer is
element of an atom ✌️
Which of these solutions are basic at 25 °C ? A:[OH−]=2.53×10−7 M B:[H3O+]=9.99×10−9 M C:[H3O+]=6.31×10−4 M
Answer: frfg6
Explanation: 655tyyt
Which of the following increases with increasing atomic
number down a group?
Answer:
The number of energy levels increases as you move down a group as the number of electrons increases. Each subsequent energy level is further from the nucleus than the last. ... The outermost electrons are repelled by the inner shell electrons (Screening effect) and hence, the atomic size increases.
Explanation:Increase in atomic size
In which Colorado Rockies scenario was there more erosion? Why was there more erosion in the scenario?
Answer:
There was more erosion in the Colorado Rockies scenario where there was steady rain compared to the scenario in the same area where there was only a drizzle. There is more erosion because the steady rain increased the volume of the river more than the drizzle did. Because there was more water added to the river, the river flowed faster. The faster a river flows, the more sediments it transports or erodes.
Explanation:
Edge
There was greater erosion inside the Colorado Rockies situation when there was persistent rain.
What is erosion?Erosion is the loss of soil or rock from the Earth's crust's surface, as well as the movement of the removed material by natural forces (such as wind or water). The term "erosion" is used in its broadest sense to refer to the overall thinning and moulding of all landmasses on the surface of the planet, such as the corrosion of rock in its natural position, the vehicles and public of weathered material, as well as erosion brought on by wind action, marine, as well as glacial processes.
In contrast to the situation within the identical region where there was simply a drizzle, there was greater erosion inside the Colorado Rockies situation when there was persistent rain. Because the volume of a river was raised by the constant rain more than by the drizzle, there is more erosion. The river flowed more quickly as a result of the additional water. A river transfers or erodes more material the quicker it runs.
Therefore, there was greater erosion inside the Colorado Rockies situation when there was persistent rain.
To know more about erosion, here:
https://brainly.com/question/7567484
#SPJ2
which of the following is a true for subtropical jet streams
Answer: how do we answer when there are no options??
Explanation:
Please help
It’s super quick
Answer:
1. a
Explanation:
2. c
Answer:
1 is A number two is C
What mass in grams of MgSO4 is required to make 59.3 mL of 2.68 M
solution?
Answer:
Approximately [tex]19.1\; \rm g[/tex].
Explanation:
Number of moles of formula units of magnesium sulfate required to make the solutionThe unit of concentration in this question is "[tex]\rm M[/tex]". That's equivalent to "[tex]\rm mol \cdot L^{-1}[/tex]" (moles per liter.) In other words:
[tex]c(\mathrm{MgSO_4}) = 2.68\; \rm M = 2.68\; \rm mol \cdot L^{-1}[/tex].
However, the unit of the volume of this solution is in milliliters. Convert that unit to liters:
[tex]\displaystyle V = 59.3\; \rm mL = 59.3 \; \rm mL \times \frac{1\; \rm L}{1000\; \rm mL} = 0.0593\; \rm L[/tex].
Calculate the number of moles of [tex]\rm MgSO_4[/tex] formula units required to make this solution:
[tex]\begin{aligned}n(\rm MgSO_4) &= c \cdot V \\ &= 2.68 \; \rm mol \cdot L^{-1} \times 0.0593\; \rm L \approx 0.159\; \rm mol \end{aligned}[/tex].
Mass of magnesium sulfate in the solutionLook up the relative atomic mass data of [tex]\rm Mg[/tex], [tex]\rm S[/tex], and [tex]\rm O[/tex] on a modern periodic table:
[tex]\rm Mg[/tex]: [tex]24.305[/tex].[tex]\rm S[/tex]: [tex]\rm 32.06[/tex].[tex]\rm O[/tex]: [tex]15.999[/tex].Calculate the formula mass of [tex]\rm MgSO_4[/tex] using these values:
[tex]M(\mathrm{MgSO_4}) = 24.305 + 32.06 + 4 \times 15.999 \approx 120.361\; \rm g \cdot mol^{-1}[/tex].
Using this formula mass, calculate the mass of that (approximately) [tex]0.159\; \rm mol[/tex] of [tex]\rm MgSO_4[/tex] formula units:
[tex]\begin{aligned}m(\mathrm{MgSO_4}) &= n \cdot M \\&\approx 0.159 \; \rm mol \times 120.361 \; \rm g \cdot mol^{-1} \approx 19.1\; \rm g\end{aligned}[/tex].
Therefore, the mass of [tex]\rm MgSO_4[/tex] required to make this solution would be approximately [tex]19.1\; \rm g[/tex].
why saturated fatty acid can’t create kink ?
PLS help!!!!!!!!
Why are halogen atoms never a central atom?
Answer:
They can’t have more than 8 valence electrons.
Explanation:
A rock rolls down a hill. Which form of energy is this an example of?
Chemical
Electrical
Mechanical
Thermal
Answer:
Mechanical
Explanation:
chemical
Explanation:
I took test 2020
The atom is one of the basic units of matter. Which part of the atom mostly determines the size of the atom?
a.Electrons
b.Nucleus
c.Neutrons
d.Protons
Answer:
Atomic size is the distance from the nucleus to the valence shell where the valence electrons are located. The separation that occurs because electrons have the same charge. The number of protons in the nucleus. The core electrons in an atom interfere with the attraction of the nucleus for the outermost electrons.
Explanation:
That would be B I believe, but please correct me if I'm wrong.
Write the symbol for every chemical element that has atomic number less than 73 and atomic mass greater than 173.2 u
Which pattern on the periodic table is correctly predicted below?
Groups determine the number of valance electrons and periods determine the number of energy levels
Groups determine the number of energy levels and periods determine the number of valence electrons
Groups determine the number of protons, and periods determine energy levels
Groups determine the number of neutrons, and periods determine valence
Plzz
PLEASE HELP !!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Which of the following does NOT increase with increasing temperature?
a kinetic energy
b thermal energy
c potential energy
d none of the above
Answer:
Explanation:
Potential energy
The ethyl acetate solution containing the mixture used in this experiment had a concentration of 20.0 g/L of benzoic acid. 1. Recovery of benzoic acid:
Answer:
The correct answer is "[tex]\frac{0.65}{V} \ percent[/tex]".
Explanation:
The given values are:
[tex]M_r=0.130 \ g[/tex]
[tex]M_o=20 \ g/L\times V(L)[/tex]
[tex]=20 \ V[/tex]
As we know,
⇒ [tex]Recovery \ percent=\frac{Amount \ of \ substance \ recovered}{Amount \ of \ substance \ originally \ taken}\times 100[/tex]
On substituting the given values, we get
[tex]=\frac{0.130}{20 \ V}\times 100[/tex]
[tex]=\frac{0.65}{V} \ percent[/tex]
Note: percent = %