A student followed the procedure of this experiment to determine the percent NaCl in a commercial bleaching solution that was found in the basement of an abandoned house. The student diluted 50.00 mL of the commercial bleaching solution to 250 mL in a volumetric flask, and titrated a 20-ml aliquot of the diluted bleaching solution. The titration required 35.46 mL of 0.1052M Na S,O, solution. A faded price label on the gallon bottle read $0.79. The density of the bleaching solution was 1.10 g ml.
(1) Calculate the mass of commercial bleaching solution titrated. 1.1 450=559
(2) Determine the percent NaOCl in the commercial bleaching solution.
(3) Calculate the mass of one gallon of the commercial bleaching solution.

Answer:

See explanation

Explanation:

Hydration of alkenes is a common reaction in organic chemistry. Hydration is simply the addition of water to an alkene. This is an acid catalysed reaction as we can see from the mechanism attached.

Recall that our task is to carry out the synthesis of 2-butanol using an alkene starting material in which there will be no rearrangement of the intermediate carbocation. If we start with the compound shown in the image (but-2-ene), the first step is the formation of the secondary carbocation. This is followed by the addition of water. Subsequently, the added water is deprotonated by another water molecule to yield 2-butanol and the acid catalyst. All these steps have been clearly outlined in the image attached.

Answer:

Ba(NO₃)₂(s) → Ba²⁺ + 2NO₃⁻

Explanation:

A strong electrolyte is a salt (A compound that has an anion and a cation and are neutral) that, in water, dissociates completely in its ions.

In Barium nitrate, Ba(NO₃)₂, the cation is Ba²⁺ (Alkaline earth metal), and the anion is the nitrate ion, NO₃⁻.

Thus, when Ba(NO₃)₂ (s) is dissolved in water, its transformation is:

When solid barium nitrate (Ba(NO₃)₂) dissolves in water, it undergoes a dissociation process where the compound breaks apart into its constituent ions.

Dissociation refers to the process in which a compound breaks apart into its constituent ions when dissolved in a solvent, typically water. In this process, the chemical bonds within the compound are disrupted, resulting in the separation of positive and negative ions.

The dissociation occurs due to the interaction between the solute particles and the solvent molecules, leading to the formation of hydrated ions.

The transformation can be represented as follows:

Ba(NO₃)₂(s) → Ba²⁺(aq) + 2NO₃⁻(aq)

In this process, the barium nitrate compound dissociates into barium ions (Ba²⁺) and nitrate ions (NO₃⁻) in the aqueous solution. The resulting ions are free to move and conduct electricity, indicating that barium nitrate is a strong electrolyte when dissolved in water.

Learn more about Dissociation, here:

https://brainly.com/question/32501023

#SPJ6

Answer:

Explanation: M(PCL5)= 31 + 5(35.5)

=208.5g/mol

M(H20)= 18g/mol

n(PCL5) = 75.5÷208.5

= 0.362mol

n(HCl)/n(PCL5)= 5/1

n(HCl)= 5×0.362

=1.81mol of HCl

Considering the definition of bond and the different type of bonds, valence is not one of  the types of bonds.

A chemical bond is defined as the force by which the atoms of a compound are held together. These are electromagnetic forces that give rise to different types of chemical bonds.

In other words, a chemical bond is the force that joins atoms to form chemical compounds and confers stability to the resulting compound.

The covalent bond is the chemical bond between atoms where electrons are shared, forming a molecule. Covalent bonds are established between non-metallic elements, such as hydrogen H, oxygen O and chlorine Cl. These elements have many electrons in their outermost level (valence electrons) and have a tendency to gain electrons to acquire the stability of the electronic structure of noble gas. The shared electron pair is common to the two atoms and holds them together.

An ionic bond is produced between metallic and non-metallic atoms, where electrons are completely transferred from one atom to another. During this process, one atom loses electrons and another one gains them, forming ions.

Metallic bonds are a type of chemical bond that occurs only between atoms of the same metallic element. In this way, metals achieve extremely compact, solid and resistant molecular structures, since the atoms that share their valence electrons.

In summary, valence is not one of  the types of bonds. The types of bonds are covalent, ionic and metallic.

Learn more about chemical bonds:

https://brainly.com/question/25385832

https://brainly.com/question/13178368

#SPJ1

Answer:

427°C .

Explanation:

Step 1:

Data obtained from the question. This include the following:

Initial temperature (T1) = 77°C

Initial pressure (P1) = P

Final pressure (P2) = 2P

Final temperature (T2) =?

Step 2:

Conversion of celsius temperature to Kelvin temperature.

This is illustrated below:

T(K) = T (°C) + 273

Initial temperature (T1) = 77°C

Initial temperature (T1) = 77°C+ 273 = 350K

Step 3:

Determination of the new temperature. The new temperature can be obtained as follow:

P1/T1 = P2/T2

P/350 = 2P/T2

Cross multiply

P x T2 = 350 x 2P

Divide both side by P

T2 = (350 x 2P ) / P

T2 = 700K

Step 4:

Conversion of Kelvin temperature to celsius temperature.

This can be obtained as follow:

T(°C) = T(K) – 273

T(K) = 700K

T(°C) = 700 – 273

T(°C) = 427°C

Therefore, the new temperature of the gas is 427°C

Answer:

C. An electron at this electrode has a higher potential energy than it has at a standard hydrogen electrode.

Explanation:

The standard hydrogen electrode (SHE) is used to measure the electrode potential of substances. The standard hydrogen electrode is arbitrarily assigned an electrode potential of zero. Recall that electrode potentials are always measured as reduction potentials in electrochemical systems.

For an electrode that has a negative electrode potential, electrons at this electrode have a higher potential energy compared to electrons at the standard hydrogen electrode. Electrons flow from this electrode to the hydrogen electrode.

On the other hand, a positive electrode potential implies that an electron at this electrode has a lower potential energy than it has at a standard hydrogen electrode. Hence electrons will flow from the standard hydrogen electrode to this electrode.

Answer:

1) R₃CO , H, H₃C, a carbon free radical

2) high temperature, ultraviolet irradiation

Explanation:

1) Homolysis leads to the formation of free radicals (species having a free electron). Thus, answer is :

R₃CO

H

H₃C

a carbon free radical

2) Homolysis require high temperature, ultraviolet irradiation.

Answer:

here, as we have known the elements of group 3A(13) such as aluminium , boron has three valance electron and in perodic table the elements are kept with similar proterties in same place so, their valance electron is 3.

hope it helps...

The number of valence electrons are in the electron dot structures for the elements in group 3A(13) is three.

The periodic table is organized into groups (vertical columns), periods (horizontal rows), and families (groups of elements that are similar). Elements in the same group have the same number of valence electrons.

Groups are the columns of the periodic table, and periods are the rows. There are 18 groups, and there are 7 periods plus the lanthanides and actinides.

There are two different numbering systems that are commonly used to designate groups, and you should be familiar with both.

The traditional system used in the United States involves the use of the letters A and B. The first two groups are 1A and 2A, while the last six groups are 3A through 8A. The middle groups use B in their titles.

Therefore, The number of valence electrons are in the electron dot structures for the elements in group 3A(13) is three.

Learn more about Groups in the periodic table, here:

https://brainly.com/question/30858972

#SPJ3

Answer:

1.22 × 10³ g

Explanation:

Step 1: Write the balanced equation

P₄O₁₀ + 6 H₂O ⇒ 4 H₃PO₄

Step 2: Calculate the moles of H₃PO₄ produced by 3.10 moles of P₄O₁₀

The molar ratio of P₄O₁₀ to H₃PO₄ is 1:4. The moles of H₃PO₄ produced are 4/1 × 3.10 mol = 12.4 mol

Step 3: Calculate the mass corresponding to 12.4 moles of H₃PO₄

The molar mass of H₃PO₄ is 97.99 g/mol.

[tex]12.4 mol \times \frac{97.99g}{mol} = 1.22 \times 10^{3} g[/tex]

Answer:

See explanation.

Explanation:

Hello,

In this case, we can show how the empirical formula is found by following the shown below procedure:

1. Compute the moles of carbon in carbon dioxide as the only source of carbon at the products:

[tex]n_C=0.01962molCO_2*\frac{1molC}{1molCO_2} =0.01962molC[/tex]

2. Compute the moles of hydrogen in water as the only source of hydrogen at the products:

[tex]n_H=0.01961molH_2O*\frac{2molH}{1molH_2O}=0.03922molH[/tex]

3. Compute the mass of oxygen by subtracting the mass of both carbon and hydrogen from the 0.4647-g sample:

[tex]m_O=0.4647g-0.01962molC*\frac{12gC}{1molC}-0.03922molH*\frac{1gH}{1molH} =0.1900gO[/tex]

4. Compute the moles of oxygen by using its molar mass:

[tex]n_O=0.1900gO*\frac{1molO}{16gO}=0.01188molO[/tex]

5. Divide the moles of carbon, hydrogen and oxygen by the moles of oxygen (smallest one) to find the subscripts in the empirical formula:

[tex]C=\frac{0.01962}{0.01188}=1.65\\ \\H=\frac{0.03922}{0.01188} =3.3\\\\O=\frac{0.01188}{0.01188} =1[/tex]

6. Search for the closest whole number (in this case multiply by 2):

[tex]C_3H_6O_2[/tex]

Moreover, the empirical formula suggests this compound could be carboxylic acid since it has two oxygen atoms, nevertheless, this is not true since the molar mass is 222.27 g/mol, therefore, we should compute the molar mass of the empirical formula, that is:

[tex]M=12*3+1*6+16*2=74g/mol[/tex]

Which is about three times in the molecular formula, for that reason, the actual formula is:

[tex]C_9H_{18}O_6[/tex]

It suggest that the compound has a highly oxidizing character due to the presence of oxygen, therefore, we cannot predict the distribution of the functional groups as it could contain, carboxyl, carbonyl, hydroxyl or even peroxi.

Best regards.

Answer:

Option C. Will always.

Explanation:

A spontaneous reaction is a reaction that occurs without an external supply of heat.

This implies that spontaneous reaction will always occur as no external supply of heat is needed.

Answer:

483.27 minutes

Explanation:

using second faradays law of electrolysis

Answer:

The answer to your question is given below

Explanation:

The balanced equation for the reaction is given below:

CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)

1. Writing an expression for the equilibrium constant, K.

The equilibrium constant, K for a reaction is simply the ratio of the concentration of the products raised to their coefficient to the concentration of the reactants raised to their coefficient.

Thus, we can write the equilibrium constant, K for the reaction as follow:

CaO(s) + CH4(g) + 2H2O(g) <=> CaCO3(s) + 4H2(g)

K = [CaCO3] [H2]⁴ / [CaO] [CH4] [H2O]²

2. Based on the value of K, more products will be in the equilibrium mixture since the value of K is a positive large number.

Answer:

A. None of these.  

Explanation:

A crystal structure is an arrangement of atoms or ions in a repeating three-dimensional array.

B. is wrong. Metal atoms, such as gold, arrange themselves into a crystal structure.

C. is wrong. Ionic solids, such as sodium chloride, arrange themselves into a crystal structure.

D. is wrong. Macromolecules (network solids), such as diamond, arrange themselves into a crystal structure.

The correct answer is None of these.  

Learn more about crystal structure here:-

https://brainly.com/question/23986315

#SPJ2

Answer:

0.109 mol/tablespoon

Explanation:

6.37 g/ 58.5 mol = 0.10888888 mol (0.109 significantly)

Answer:

A: 0.109

Explanation:

Edge 2020

Answer:

2ErF3 + 3Mg → 2Er + 3MgF2

Explanation:

Erbium metal is a member of the lanthaniod series. It reacts with halogens directly to yield erbium III halides such as erbium III chloride, Erbium III fluoride etc.

Erbium metal (Er) can be prepared by reacting erbium(III) fluoride with magnesium; the products are erbium metal and magnesium fluoride. This is a normal redox process in which the Erbium metal is reduced while the magnesium is oxidized. The balanced reaction equation of this process is; 2ErF3 + 3Mg → 2Er + 3MgF2

Answer:

The calculator add the CO2 released from the use of electricity, released from driving and the CO2 from the waste that we disposed.

Explanation:

The carbon dioxide, CO2 is what the human body does not need, therefore, we breathe it out, hence taking in oxygen(respiration process). The plants need oxygen for the production of their own food.

The carbon calculator estimate the amount of CO2 that each individual releases into the atmosphere through the consideration of several factors such as the kind of food that we eat.

Therefore, if we are to use the carbon calculator to determine the amount of CO2 that each individual releases into the atmosphere we will have:

The amount of CO2 that each individual releases into the atmosphere =( CO2 released from the use of electricity) + (CO2 released from driving) + (the CO2 from the waste that we disposed).

Answer:

[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]

Explanation:

Hello,

In this case, we can write the law of mass action for the undergoing chemical reaction, based on the rates and the stoichiometric coefficients:

[tex]\frac{1}{-2}r_{NH_3} =\frac{1}{1} r_{N_2}=\frac{1}{3}r_{H_2}[/tex]

In such a way, knowing the rate of formation hydrogen (H₂), we can know the  rate of change of ammonia, that must be negative for consumption:

[tex]r_{NH_3} =\frac{-2}{3}r_{H_2}=\frac{-2}{3}*9.00\frac{M}{s} \\\\r_{NH_3} =-6.00\frac{M}{s}[/tex]

Nevertheless, the absolute magnitude will be positive:

[tex]r_{NH_3,abs} =6.00\frac{M}{s}[/tex]

Best regards.

Answer:

a. boiling

Explanation:

Answer:

the mass of HBr that would react is 25.41 g of HBr

Explanation:

attached is the calculations.

Answer:

the density if vinegar will also be needed

Explanation:

Because this is an experiment of volumetric analysis

Answer:

The most common position for an double bond in an unsaturated fatty acid is delta 9 (Δ⁹)

Explanation:

Unsaturated fatty acids are carboxylic acids which contains one or more double bonds. The chain length as well as the number of double bonds is written separated by a colon. The positions of the double bonds are specified starting from the carboxyl carbon, numbered as 1, by superscript numbers following a delta (Δ). For example, an 18-carbon fatty acid containing a  single double bond between carbon number 9 and 10 is written as 18:1(Δ⁹).

In most monounsaturated fatty acids, the double bond is between C-9 and C-10 (Δ⁹), and the other double bonds of polyunsaturated fatty acids are generally Δ¹² and Δ¹⁵. This positioning is due to the nature of the biosynthesis of fatty acids. In the mammalian hepatocytes, double bonds are introduced easily into fatty acids at the Δ⁹ position, but cannot introduce additional double bonds between C-10 and the methyl-terminal end. However, plants are able to introduce these additional double bonds at the  Δ¹² and Δ¹⁵ positions.

Answer:

Li

Explanation:

The phenomenon of wave particle duality was well established by Louis deBroglie. The wavelength associated with matter waves was related to its mass and velocity as shown below;

λ= h/mv

Where;

λ= wavelength of matter waves

m= mass of the particle

v= velocity of the particle

This implies that if the velocities of all particles are the same, the wavelength of matter waves will now depend on the mass of the particle. Hence; the wavelength of a matter wave associated with a particle is inversely proportional to the magnitude of the particle's linear momentum. The longest wavelength will then be obtained from the smallest mass of matter. Hence lithium which has the smallest mass will exhibit the longest DeBroglie wavelength

The atom that have the longest de Broglie wavelength is ; ( A ) Li

Wave particle duality is a phenomenon by de Broglie. that shows that The wavelength associated with matter waves is related to its mass and velocity .

Wave particle duality is represented as ;  λ = h / mv

λ= wavelength of matter waves

m= mass of the particle

v= velocity of the particle

Given that the elements have the same velocity the atom that would have the longest de Broglie wavelength is Li

Learn more : https://brainly.com/question/21537274

Answer:

1.1 × 10⁻³ g

Explanation:

Step 1: Given data

Henry's Law constant for methane (k): 1.4 × 10⁻³ M/atm

Volume of water (=volume of solution): 75 mL

Partial pressure of methane (P): 0.68 atm

Step 2: Calculate the concentration of methane in water (C)

We will use Henry's law.

[tex]C = k \times P = 1.4 \times 10^{-3}M/atm \times 0.68atm = 9.5 \times 10^{-4}M[/tex]

Step 3: Calculate the moles of methane in 75 mL of water

[tex]\frac{9.5 \times 10^{-4}mol}{L} \times 0.075 L = 7.1 \times 10^{-5}mol[/tex]

Step 4: Calculate the mass corresponding to 7.1 × 10⁻⁵ mol of methane

The molar mass of methane is 16.04 g/mol.

[tex]7.1 \times 10^{-5}mol \times \frac{16.04g}{mol} = 1.1 \times 10^{-3} g[/tex]

Answer: 10 moles/kg.

Explanation:

Given, Mass of solute = 24.2 g

Molar mass of solute = 24.2 g/mol

[tex]\text{Moles of solute =}\dfrac{\text{Mass of solute}}{\text{Molar mass of solute}}\\\\=\dfrac{24.2}{24.2}=1[/tex]

Mass of solvent = 100.0g = 0.1 kg  [1 g=0.001 kg]

[tex]\text{Molality}=\dfrac{\text{Moles of solute}}{\text{kilograms of Solvent}}\\\\=\dfrac{1}{0.1}\\\\=10\ moles/kg[/tex]

Hence, the molality of the resulting solution is 10 moles/kg.

Answer:

H₂(g) + Cu²⁺(aq) → 2H⁺(aq) + Cu(s)

Explanation:

In a redox reaction, one half-reaction is the oxidation (where the atom loss electrons) whereas the other reaction is the reduction (Where the atom is gaining electrons.

In the reactions:

H₂(g) → 2H⁺(aq) + 2e⁻ oxidation

Here, the reaction is written as the oxidation because the hydrogen H₂ is in oxidation state 0 and H⁺ in +1. That means each atom is loosing one electron.

Cu²⁺(aq) + 2e⁻ → Cu(s) reduction

And here, the Cu²⁺ is in +2 oxidation state and after the reaction is in Cu(s) 0 state. Thus, each atom is gaining 2 electrons.

The sum of both reactions is:

H₂(g) + Cu²⁺(aq) + 2e⁻ → 2H⁺(aq) + 2e⁻ + Cu(s)

Subtracting the electrons in both sides of the reaction:

The question is incomplete; the complete question is: Classify each molecule by whether its real bond angles are the same as or different than its model (ideal) bond angles. In other words, do the bond angles change when you switch between Real and Model mode at the top of the page? Same (angles do not change) Different (angles change) Answer Bank | H2O | CO2, SO2, XeF2, BF3 CIF3, NH3, CH4, SF4, XeF4, BrF5, PCI5,SF6

Answer:

Compounds whose real bond angle are the same as ideal bond angle;

SF6, BF3, CH4, PCI5

Compounds whose real bond angles differ from ideal bond angles;

H2O, CO2, SO2, XeF2, CIF3, NH3, SF4, XeF4, BrF5

Explanation:

According to the valence shell electron pair repulsion theory (VSEPR), molecules adopt various shapes based on the number of electron pairs on the valence shell of the central atom of the molecule. The electron pairs usually orient themselves as far apart in space as possible leading to various observed bond angles.

The extent of repulsion of lone pairs is greater than that of bond pairs. Hence, the presence of lone pairs on the valence shell of the central atom in the molecule distorts the bond angles of molecules away from the ideal bond angles predicted on the basis of valence shell electron pair repulsion theory.

For instance, methane is a perfect tetrahedron having an ideal bond angle of 109°28'. Both methane and ammonia are based on a tetrahedron, however, the presence of a lone pair of electrons on nitrogen distorts the bond angle of ammonia to about 107°. The distortion of lone pairs in water is even more as the bond angles of water is about 104°.

Answer:

1) HCl (Hydrochloric acid reacts with NH3 and forms dense fumes)

2) Methane (It is from the group of alkanes and is a green house gas)

3) Deliquescent substance (It is a solid which when kept in open forms a solution after sometime)

4) Brass (It is a solid-in-solid solution used to make electrical fittings)

5) Aluminium

Question 2:

1)    Al₂O₃ + 2NaOH    ⇒   2NaAlO₂  (Sodium Aluminate) + H₂O

2)   Zn +  H₂SO₄   (dilute)  =>  ZnSO₄  (Zinc Sulphate) + H₂

Answer:

equations

Aluminium oxide and Sodium hydroxide react to form water and sodium aluminate

Zinc reacts with dilute sulphuric acid to form zinc sulphate and hydrogen gas

Answer:

254.23 g/mol

Explanation:

Atomic mass for Osmium tetroxide would be 254.23 g/ml

Answer:254.2276

Explanation:

Answer:

D . Sulphur

Explanation:

the element with a 3p4 valence configuration, look in period 3 and group XVI, and that is ...

S, sulfur.