Answer:
Explanation:
jn
The student’s percent yield is 92.55 % where theoretical yield is 21.5 grams.
What is percent yield?Percent yield is defined as the ratio of actual yield to the theoretical yield multiplied by 100. If the actual and theoretical yield are same then the percent yield is 100%.If actual yield is less than the theoretical yield then the percent yield is less than 100%.Reason of this condition arising is the incompletion of reaction or loss of sample during recovery process.
In cases where percent yield is over 100% it indicates that more sample is recovered than the predicted amount.This condition arises when there are other simultaneous reactions taking place leading to the formation of product. It can also arise if there is incomplete removal of impurities from the sample .Percent yield is calculated as per formula, 19.9/21.5×100=92.55%.
Learn more about percent yield,here:
https://brainly.com/question/12704041
#SPJ6
Which statement describes copper?
O A. Copper is an insulator because its valence electrons can move freely from atom to atom.
O B. Copper is a conductor because its valence electrons can move freely from atom to atom.
O C. Copper is an insulator because its innermost electrons are shared between atoms.
O D. Copper is a conductor because its innermost electrons are shared between atoms.
Copper is a conductor because its valence electron can move freely from atom to atom. Option (B) is correct answer.
What is Insulator ?
Insulator is a material which does not conduct any current. Non metals are insulators. Electrons do not move freely in insulator. Thermal conductivity of insulator very is low and its resistance is vey high. These are used in making insulating electrical equipment.
What is Conductor ?Conductor is a substance which allow the electricity to flow through it. Metals are conductors. Electron can move freely in conductors. Thermal conductivity of conductor is very high and its resistance is vey low. These are used in making the electrical equipment.
Now let check all options one by one:
Option (A): Copper is a conductor not an insulator. Copper is a metal and it consists free electrons and electron can move freely from one atom to another atom.
So, option (A) is incorrect.
Option(B): Copper is a conductor because its valence electron can move freely from atom to atom. As copper is a metal it is a good conductor of electricity. The thermal and electrical conductivity of copper is high.
So, option (B) is correct.
Option (C): Copper is not an insulator it is conductor as already discussed in option (A).
So, option (C) is also incorrect.
Option (D): Copper is a conductor because its electron can move freely and it is a good thermal conductor.
So, option (D) is also incorrect.
Thus, from above conclusion we can say that Copper is a conductor because its valence electron can move freely from atom to atom.
Hence, option (B) is correct answer.
Learn more about Conductor and Insulator here: https://brainly.com/question/492289
#SPJ2
A solvent has a freezing point of 10°C. What is the most likely freezing point if 5 grams of Salt is mixed with the solvent? (AKS 5e)
Question 5 options:
15°C
20°C
5°C
10°C
[tex]\huge{\color{hotpink}{Hola}}[/tex]
What is a galvanic cell made of
Answer: A galvanic cell consists of two different metals (electrodes) connected through a conducting solution (an electrolyte) and also connected externally completing a circuit.
(hurry pls)Carl plugs in a lamp that has 0.67 of resistance and 8.1 volts running through it. What is the amount of current running through the lamp? C 543 A C 0.08 A C 12.09 A C743 A
Answer:
C)12.09 Ampere
Explanation:
V= IR
Where I= current of the system
R= resistance= 0.67 ohm
V= potential difference=8.1 volts
Substitute the values
8.1= I× 0.67
I= 8.1/0.67
=12.09 Ampere
A hydrogen molecule is:
a Polar
b Covalent
C Non-polar
d Both B and C
Explanation:
both b and c since it can be both
name 3 common acids that you use in your home
Answer:
vinegar, soft drinks, seltzer water , citrus fruits
Explanation:
3. If all of the predators in an ecosystem are killed off,
what happens to organisms that are their food source?
Answer:
its a little bit long but= The most obvious result of the removal of the top predators in an ecosystem is a population explosion in the prey species.More predators kill more prey, which, along with food scarcity, decreases the population. When prey becomes more scarce, the predator population declines until prey is again more abundant.
(10 POINTS!!!!!!!!!!!
What environmental change will take place when harmful substances get into the food and water supply of animals or plants?
A Climate change
B Increased predators
C Lack of food
D Pollution
need asap
Answer:
A climate change
Explanation:
the surrounding area would be effected in all ways imaginable, such as change in air, soil, water, plants, animals. and if you eat those said animals those harmful things can transfur into you
Select the correct answer. Which statement is true for a heating curve?
OA. It shows how the pressure of a substance changes when heated.
ов. It shows how the temperature of a substance changes when heated
OC. It shows how the volume of a substance changes when heated.
OD. It shows how the mass of a substance changes when heated.
please help
Answer:
OB
Explanation:
tht is correct make me brainliest
26 grams of 2,2 dimethyl hexane( C8H16) under goes combustion. How
much space would the CO2 gas occupy at 26 Celsius and 101.75 kPa?
Answer: The [tex]CO_{2}[/tex] gas occupies a space of 5.57 L at 26 Celsius and 101.75 kPa.
Explanation:
Given: Mass = 26 g
Pressure = 101.75 kPa
Convert kPa into atm as follows.
[tex]1 kPa = 0.00986923 atm\\101.75 kPa = 101.75 kPa \times \frac{0.00986923 atm}{1 kPa}\\= 1 atm[/tex]
Temperature = [tex]26^{o}C = (26 + 273) K = 299 K[/tex]
Now, moles of a substance is defined as mass of substance divided by its molar mass.
As molar mass of 2,2 dimethyl hexane is 114.23 g/mol. So, its number of moles are calculated as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{26}{114.23 g/mol}\\= 0.227 mol[/tex]
Formula used to calculate the volume is as follows.
PV = nRT
where,
P = pressure
V = volume
n = no. of moles
R = gas constant = 0.0821 L atm/mol K
T = temperature
Substitute the values into above formula as follows.
[tex]PV = nRT\\1 atm \times V = 0.227 mol \times 0.0821 L atm/mol K \times 299 K\\V = 5.57 L[/tex]
Thus, we can conclude that the [tex]CO_{2}[/tex] gas occupies a space of 5.57 L at 26 Celsius and 101.75 kPa.
How many moles of air are there in a 125 mL Erlenmeyer flask if the pressure is 755
mm Hg and the temperature is 20.0°C?
To Find :
How many moles of air are there in a 125 mL Erlenmeyer flask if the pressure is 755 mm Hg and the temperature is 20.0°C .
Solution :
Since, air contains different gas in different proportion.
Its average molar mass is considered to be 29 gram/mol .
Now, we know by ideal gas equation :
[tex]PV = nRT\\\\n = \dfrac{PV}{RT}[/tex]
Here, R is ideal gas equation, [tex]R = 62.363\ mm\ Hg\ L \ mol^{-1} \ K^{-1}[/tex]
Putting all given values we get :
[tex]n = \dfrac{755 \times 0.125}{62.363\times (20+273)}\ moles\\\\n = 0.00516 \ moles[/tex]
Hence, this is the required solution.
what part of the electromagnetic spectrum was first developed during ww2
Answer:
Radio waves were first developed in WWII
Explanation:
Mark me Brainliest?
What is the number of moles in 10.62 L of H2S gas at STP?
Answer:
0.474 moles
Explanation:
divide 10.62 by 22.4.
When the head of a match burns, chemical reaction is taking place. But a certain amount of energy is required to get this reaction started. This is the reactions activation energy. Describe where this energy comes from. What provides this energy?
Answer:
Rubbing the match against a rough surface
The activation energy is provided by friction between surfaces
Explanation:
Activation energy is the energy required to start a chemical reaction. It is the minimum energy that must be supplied for a reaction to proceed.
When we strike a match against a rough surface, what we are trying to do is to supply the required activation energy in the form of friction in order to get the combustion reaction started.
Hence, the activation energy for the combustion of a match head is supplied by friction when the match head is struck against a rough surface.
can anyone tell me the answer
Answer:
A. A as concentration decreases.
Explanation:
A represents a reactant and B is a product, the concentration of the latter increases at the expense of the concentration of the former. Hence, A is the reactant of the chemical reaction as its concentration decreases.
A HgO → Hg + O2
B 2Fe + O2 → Fe2O3
Which best represents a
balanced equation?
C 2H2 + O2 → 2H20
17 moles of oxygen is equals to how many grams
17 × ( 2 × 16 ) = 17 × 32 = 544 grams
___________________________
Use the given Nernst equation and reaction to solve this problem. What is the potential of this cell with the given conditions?
2Li (aq) + F2(g) 2Li+(aq) + 2F- (aq)
E° = +5.92 volts
T = 200°C
[Li+] = 10.0 molar
[F-] = 10.0 molar
Answer:
The 2nd one is the one
Explanation:
and it isn't writen out all the way
At 20°c solubility of sugar is 179.How much gram of sugar is needed to prepare saturated solution with 40gm of water
Answer: Volume is 22,3 ml
Explanation: I assume solubility is expressed to 100 ml water
You can use proportion : 179 g / 100 ml water = 40 gm/ V
Multiplying the proportion gives 179 g · V = 100 ml · 40 g | : 179 g
V = 4000 ml / 179 = 22,3 ml
Oxygen has a very low boiling point and is a gas at room temperature. Water has a much higher boiling point and is a liquid at room
temperature. Which of these statements would support these facts?
A)
Oxygen is an element while water is a compound.
B)
Oxygen is diatomic and exist as O2 in nature.
Water has a higher attraction between its molecules than oxygen.
D)
Water is a molecule with 3 atoms and oxygen exists in groups of 2.
Answer is C
A student completes a titration by adding 25.0mL of NaOH of unknown concentration to 35.0mL of 0.25M HCl. What is the molar concentration of NaOH? If it takes 15 mL of 0.5M sodium hydroxide solution to neutralize 200 mL of Hydrochloric acid, what is the concentration of HCl? THIS IS TIMED PLEASE HELP! (include work shown)
Answer:
0.35M NaOH and 0.0375M HCl.
Explanation:
NaOH reacts with HCl as follows:
NaOH + HCl → NaCl + H2O
Where 1 mole of NaOH reacts per mole of HCl
To solve the first question we must find the moles of HCl that reacted = Moles NaOH in the unknown. With the moles and the volume we can find its molar concentration:
Moles HCl = Moles NaOH:
0.0350L * (0.25mol / L) = 0.00875 moles NaOH
In 25.0mL = 0.0250L:
0.00875 moles NaOH / 0.0250L =
0.35M NaOH
For the second question, the moles of NaOH = moles HCl. With the 200mL = 0.200L the molarity is:
Moles NaOH = Moles HCl:
0.015L * (0.5mol / L) = 0.0075 moles HCl / 0.200L =
0.0375M HCl
What are the coefficients that will balance the skeleton equation below?
N, + H2
H NH3
1, 1, 2
3, 1, 2
1, 3,2
1, 3,3
Answer:
the answer is 1,3,2
Explanation:
Balance equation
Answer:
1,3,2
Explanation:
took test
Which pair of elements will form an ionic bond?
a. Potassium and Oxygen
b. Iron and Barium
C. Sulfur and Nitrogen
d. Calcium and Silicon
I believe that the answer is A.
The combination of potassium (K) and oxygen (O2) produces K2O (potassium oxide). The balanced equation is 2K + O2 ==> K2O.
An 18.7 g sample of platinum metal increases in temperature from 21.2C to 23.5C
when 5.7 J of heat are added. What is the specific heat of platinum?
Answer:
132.53 J/kg.°C
Explanation:
Applying,
Q = cm(t₂-t₁)................ Equation 1
Where Q = amount of heat, c = specific heat capacity of platinum metal, m = mass of platinum metal, t₁ = initial temperature, t₂ = Final temperature.
Make c the subeject of the equation
c = Q/m(t₂-t₁).............. Equation 2
From the question,
Given: Q = 5.7 J. m = 18.7 g = 0.0187 kg, t₁ = 21.2°C, t₂ = 23.5°C
Substitute these values into equation 2
c = 5.7/[0.0187×(23.5-21.2)]
c = 5.7/0.04301
c = 132.53 J/kg.°C
If an element forms a 1- ion, in which group of the periodic table would you
expect to find it?
O A. 18
B. 2
C. 1
O D. 17
Answer:
D. 17
Explanation:
Halogens (group 17) are most likely to form a -1 ion. This is because they want to complete their octet. A prime example of this is sodium chloride. Sodium chloride is an ionic compound. Sodium gives up its valence electron, therefore, recieving a +1 charge, and Chlorine takes it, giving it a -1 charge. Chlorine is also in group 17, halogens.
Answer: the answer is D.17
Explanation:
How many grams are there in 2.5 moles of Ca(OH)2?
Answer: 185 grams
Explanation: First find out how many grams are in one mol: The molar mass es are taken from the periodic table, Ca is 40, O is 16, H is 1. There are 2 O and 2 H for (OH)2: 40+32+2= 74g/mol x 2.5 mol = 185 the moles cancel and you are left with grams
What is the oxidation state of Carbon in CaC2O4?
Answer:
The oxidation state of carbon in CaC204 is 3
NEED ANSWER FAST !!
Using the following equation,
a. Balance the equation by putting the smallest whole number coefficient in each blank
Fe2O3 + H2 à Fe + H2O
b. Use the balanced equation to calculate how many grams of iron can be made from 0.025 mol of Fe2O3
Answer: grams Fe (Round your answer to the nearest hundreths)
Answer:
.-.
Explanation:
When a substance changes from a gas to a liquid, what happens to the energy, order, and spacing of
particles within the substance?
I
Answer:
Explanation:
When gas changes to liquid, it releases the thermal energy that has been absorbed before to become gas which does not alter the temperature at all. A reduction in energy changes the arrangement of particle. There spacing between the particles also increases but not as in a gaseous state and so does the kinetic energy. The particles now are now arranged in irregular pattern.
How many energy levels does an atom of carbon have?
Answer:
6
Explanation: