Answer:
H2SO4
Explanation:
Answer:
A strong acid has a large Ka
If Sulfonamides are toxic to Bacteria by stopping folic acid synthesis, and since folic acid is also very important for humans Does this make Sulfonamides toxic to humans? And why?
Answer:
No
Explanation:
Most Sulfonamides are antibiotics that kill bacteria but not human cells. They work by distrupting the production of dihydrofolic acid (form of folic acid that human/bacteria cells use for protein production).
Can u please help me , I’m stuck it’s question e
Answer:
salt
Explanation:
xdcfgvh jhg
In which two places is aggregate generally found? A.floodplains and alluvial fans B.alluvial fans and mines C.mines and beneath the topsoil D.beneath the topsoil and above the topsoil ED2020
Answer:
A.floodplains and alluvial fans .
Explanation:
Hope it helps.
Answer:A)
Explanation:
at 60C how much potassium nitrate can be dissolved in 400g of water
Answer:
About 110 g
Explanation:
The solubility graph is a very useful tool because it tells you the amount of potassium nitrate that can be dissolved per
100 mL
of water in order to have a saturated solution of potassium nitrate at a given temperature.
In order to find the solubility of the salt at 60 degree celcius
start from the 60 degree celcius
Mark on the graph and move up until you intersect the curve. At the point of intersection, move left until you intersect the y axis and read off the value that you land on.
In this case, you can estimate that the solubility of potassium nitrate in water at 60 degree celcius is equal to about
solubility ≈ 110 g / 100 mL water
−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−−
This tells you that a saturated solution of potassium nitrate will hold about
110 g of dissolved salt, i.e. of dissociated salt, per 100 ml of water at 60 degree celcius
A solution...
A. is a single-phase homogeneous mixture.
B. can contain more than two phases.
C. must contain water.
D. is always a liquid.
Answer:
A
Explanation:
Answer:
A
Explanation:
"It means of solving a problem or dealing with a difficult situation."
PLEASE HELP!
Why is phosphorus diamagnetic.
Answer:
FROM the magnetic point of view, phosphorus is an extremely interesting
substance because of its allotropic modifications. The ordinary forms are
the yellow (or white) and the red varieties. X-ray investigations indicate
that probably yellow phosphorus is analogous with the cubic forms of antimony and arsenic; and red phosphorus with monoclinic antimony and
arsenic (Mellor, 1928). The conclusions of different workers on the structure of red phosphorus are not in agreement. There is also Bridgman's black
phosphorus which is probably hexagonal (Linck and lung, 1925). Natta
and Passerini (1930) have studied the crystal structure of white phosphorus.
This substance when condensed at the temperature of liquid ammonia is
cubic. Atomic positions however are yet undetermined. Another and noncubic form is obtained by condensation at liquid-air temperatures. It is
thus clear that most likely white phosphorus is cubic in structure with a
probable superposition of another lattice.
The evidence from Raman effect also points to the same conclusion.
Bhagavantam (1930) investigated the Raman effect of white phosphorus in
the solid state. The characteristic frequencies obtained by him are 607, 468
and 374. Since the phosphorus molecule is known to contain 4 atoms,
Bhagavantam (1930) has shown that the tetrahedral structure fits the results
satisfactorily since such a structure would give only three frequencies. But
for the particular law of forces adopted, the frequencies should have the
ratio 2: 2: 1 but the observed frequencies deviate considerably.
Phosphorus is a really intriguing element. because of the allotropic changes to the material.
Why phosphorus is dimagnetic?Red phosphorus is likely akin to monoclinic antimony, while yellow phosphorus is probably similar to the cubic forms of antimony and arsenic.
There is disagreement among the findings of many researchers regarding the structure of red phosphorus. Additionally, Bridgman's black It is presumably hexagonal, phosphorous (Linck and lung, 1925). Natta and Passerini (1930) have investigated the white phosphorus crystal structure.
Condensed from this material at liquid ammonia temperature is cubic. However, the locations of the atoms are still unknown. Condensation at liquid air temperatures yields a different, noncubic shape.
Therefore, Phosphorus is a really intriguing element. because of the allotropic changes to the material.
To learn more about phosphorus, refer to the link:
https://brainly.com/question/4622631
#SPJ3
please help i need some help with this one plz :)
Answer:
in some animal they changes their body temperature according to the environment temperature. so are called cold blooded animals.they change their temperature for adaptation.
All of the following are units for pressure except _____. A. Pa B. psi C. atm D. Hg
Answer:
B. psi
Explanation:
Pa is Pascal
atm is atmosphere
Hg is Mercury
hope it helps.
hello:) is hydrogen chloride and hydrochloride acid the same??
Answer:
No because hydrogen chloride is gas and hydrochloric acid is (as stated in the name) an acid. The formula for hydrogen chloride is HCI(g), the little g states that the compound is a gas and the formula for hydrochloric acid is HCl(aq) and the little aq means aqueous.
Answer:
no. they are not the same
Explanation: Although, they both do have the same chemical formula HCL, they differ in their states of matter. Hydrogen chloride is a gas whereas hydrochloric acid is a solution of hydrogen chloride gas and water( creates an aquaeous solution). Hydrochloric acid is highly corrossive.
How many grams of carbon dioxide does a hummingbird emit daily?
Answer:
3.5 g CO2
Explanation:
A hummingbird emits up to 3.5 grams of CO2 a day.
Equation:7.9 x 10‒2mol CO2x (44.01 g CO2/ 1 mol CO2)
=3.5 grams
Hope this helps!
7. Write a formula for each of the following:
(a) an alkane with 22 carbon atoms
(b) an alkene with 17 carbon atoms
(c) an alkyne with 13 carbon atoms.
Answer : The formula for each of the following is:
(a) [tex]C_{22}H_{46}[/tex]
(b) [tex]C_{17}H_{34}[/tex]
(c) [tex]C_{13}H_{24}[/tex]
Explanation :
Alkanes are hydrocarbon in which the carbon atoms are connected with single covalent bonds.The general formula of alkanes is [tex]C_n H_{2n+2}[/tex] where n is the number of the carbon atoms present in a molecule of alkane.
Alkenes are hydrocarbon in which the carbon atoms are connected with double covalent bonds.The general formula of alkenes is [tex]C_n H_{2n}[/tex] where n is the number of the carbon atoms present in a molecule of alkene.
Alkynes are hydrocarbon in which the carbon atoms are connected with triple covalent bonds.The general formula of alkynes is [tex]C_n H_{2n-2}[/tex] where n is the number of the carbon atoms present in a molecule of alkyne.
(a) An alkane with 22 carbon atoms
Putting n = 22 in the general formula of alkane, we get the formula of alkane as, [tex]C_{22}H_{2(22)+2}[/tex] or [tex]C_{22}H_{46}[/tex]
(b) An alkene with 17 carbon atoms
Putting n = 17 in the general formula of alkene, we get the formula of alkene as, [tex]C_{17}H_{2(17)}[/tex] or [tex]C_{17}H_{34}[/tex]
(c) An alkyne with 13 carbon atoms
Putting n = 13 in the general formula of alkyne, we get the formula of alkyne as, [tex]C_{13}H_{2(13)-2}[/tex] or [tex]C_{13}H_{24}[/tex]
Answer:
[tex]\huge \boxed{{C_{22} H_{46} \ \ \ \ C_{17} H_{34} \ \ \ \ C_{13} H_{24}}}[/tex]
Explanation:
[tex]alkanes \ \Rightarrow \ C_n H_{2n+2}[/tex]
[tex]C_{22} H_{2(22)+2}[/tex]
[tex]C_{22} H_{44+2}[/tex]
[tex]C_{22} H_{46}[/tex]
[tex]alkenes \ \Rightarrow \ C_n H_{2n}[/tex]
[tex]C_{17} H_{2(17)}[/tex]
[tex]C_{17} H_{34}[/tex]
[tex]alkynes \ \Rightarrow \ C_n H_{2n-2}[/tex]
[tex]C_{13} H_{2(13)-2}[/tex]
[tex]C_{13} H_{26-2}[/tex]
[tex]C_{13} H_{24}[/tex]
How many moles of atoms are in each elemental sample?
A. 1.24 g Zn
B. 28.1 g Ar
C. 84.0 g Ta
D. 2.29x10^-2 g Li
Answer:
Moles = mass(m) / Molar mass (M)
A. 1.24g of Zn
m = 1.24g
M = 65.4 g/mol
moles of Zn = 1.24g/ 65.4g/mol
= 0.01896mol
B. 28.1 g Ar
m = 28.1g
M(Ar) = 39.9g/mol
moles of Ar = 28.1g/39.9g/mol
= 0.7043 mol
C. 84.0 g Ta
m = 84.0g
M(Ta) = 181g/mol
moles of Ta = 84.0g/181g/mol
= 0.4641 mol
D. 2.29x10^-2 g Li
m = 2.29x10^-2 g
M(Li) = 6.9g/mol
moles of Li = 2.29x10^-2 g / 6.9g/mol
= 0.0033 mol
Hope this helps
What is the mass in grams of each elemental sample?
A. 6.65 mol W
B. 0.588 mol Ba
C. 68.4 mil Xe
D. 1.57 mol S
Answer:
Mass (m) = Number of moles(n) × Molar mass (M)
A. 6.65 mol W
M (W) = 184 g/mol
n = 6.65mol
mass of W = 6.65 × 184 = 1223.6g
B. 0.588 mol Ba
M(Ba) = 137g/mol
n = 0.588 mol
mass of Ba = 0.588 × 137 = 80.556g
C. 68.4 mol Xe
M(Xe) = 131g/mol
n = 68.4 mol
mass of Xe = 68.4 × 131 = 8960.4g
D. 1.57 mol S
M(S) = 32.1 g/mol
n= 1.57 mol
mass of S = 1.57 × 32.1 = 50.397g
Hope this helps
4. Which change to a DNA molecule would have the least effect on an organism?
A: an addition to a base sequence at the beginning of a gene
B: a substitution in a base sequence that does not code for a protein
C: a substitution that creates a "stop" code in the middle of a gene
D: a deletion from a base sequence in the middle of a gene
Answer: Change in a single nitrogen base in the DNA sequence will not have any significant effect on the organism.
So A
Explanation:
This is known as point mutation and it does not have any significant change in the protein and it is least harmful type of DNA mutation.
Which compound is responsible for the smell that is associated with the decomposition of dead animals? acetic acid butanoic acid cadaverine dimethylether
Answer:
cadaverine
Explanation:
Cadaverine is a chemical compound with the IUPAC name of pentane-1,5-diamine. It is a chemical compound that emits a foul odour when decomposers like bacteria act on dead animal tissues.
Cadaverine is a product of protein hydrolysis by bacteria in dead tissues, specifically when amino acid LYSINE is decarboxylated. Hence, cadaverine is the compound responsible for the terrible smell produced when a dead animal is being decomposed.
The orbital radii of four planets in our solar system is shown in the following table. Orbital Radii Planet Orbital Radii (AU) W 5.2 X 0.72 Y 0.37 Z 19.1 Which planets are likely to be gas giants? W and X X and Y Y and Z W and Z
Answer:
w&x
Explanation:
The planets which are likely to be gas giants are W and X
What is gas giant planet?Gas giant planets are planets which constitutes of only two gases; hydrogen and helium.
However, of all the planetry solar system, there are only four planets which are the major gas giant planets:
UranusNeptuneJupiterSaturnIn conclusion, the planets which are likely to be gas giants are W and X
Learn more about the gas giant planets:
https://brainly.com/question/7513051
#SPJ2
seasonal variation in Earth's climate are caused by
a Earth's rotation
b Earth's tilt
c Earth's magnetic field
d Earth's precession
Answer: B: Earths tilt
Explanation:
Seasonal variation occurs because the Earth is tilted on its axis by 23.5˚. As Earth orbits the sun, its orientation to the sun changes.
what sentence describes all atoms of one element A. They have the same number of isotopes B. They have the same properties C. They have the same number of protons D.They have the same number of neutrons
Answer:
C. They have the same number of protons.
Explanation:
Even though in isotopes, there's uneven number of neutrons, there's always same number of protons.
Hope it helps.
Which compound is used to make asphalt? a saturated hydrocarbon that has more than 35 carbons in its chain a saturated hydrocarbon that has between 17 and 35 carbons in its chain a saturated hydrocarbon that has between 5 and 8 carbons in its chain a saturated hydrocarbon that has between 1 and 2 carbons in its chain
Answer:
answer is A. a saturated hydrocarbon that has more than 35 carbons in its chain
Explanation:
edge in 2020 :)
The compound which is used to make asphalt is a saturated hydrocarbon that has more than 35 carbons in its chain.
What is asphalt?Asphalt is also known by the name of bitumen, its appearance is sticky and black or present in semi solid form of petroleum.
Asphalt is a kind of hydrocarbon means mainly formed by the composition of carbon atoms and hydrogen atoms, but in very trace quantity amount of nitrogen, sulfur and other hateroatoms are also present. It is present in complex form means both saturated and unsaturated or aliphatic and aromatic compounds are present in it. It is formed by the long carbon chain which has a number of Carbon atoms around 150.
Hence it is a saturated hydrocarbon that has more than 35 carbons.
To know more about asphalt, visit the below link:
https://brainly.com/question/431314
Scientific evidence shows that Earth's diameter, and thus overall size, does.
not change. This evidence goes against which two theories?
A. Expanding Earth
B. Plate tectonics
U
C. Contracting Earth
D. Continental drift
SUBMIT
Answer:
Expanding earth and contracting earth
Explanation:
Answer:
A and C
Explanation:
Iron oxide reacts with carbon monoxide to produce iron and carbon dioxide, with the balanced chemical equation Fe2O3 + 3CO —> 2Fe + 3CO2. What does this tell you
about the relative amounts of iron oxide and iron consumed and produced in this equation?
A. For every two moles of iron oxide consumed, one mole of iron is produced,
B. For every two grams of iron oxide consumed, one gram of iron is produced.
C. For every gram of iron oxide consumed, two grams of iron are produced
D. For every mole of iron oxide consumed, two moles of iron are produced.
Answer:
Option D. For every mole of iron oxide consumed, two moles of iron are produced.
Explanation:
The balanced equation for the reaction is given below:
Fe2O3 + 3CO —> 2Fe + 3CO2
From the balanced equation above,
1 mole of iron oxide, Fe2O3 reacted with 3 moles of carbon monoxide, CO to produce 2 moles of iron, Fe and 3 moles of carbon dioxide, CO2.
Thus, with a careful observation of the equation, we can conclude that for every 1 mole of iron oxide, Fe2O3 consumed, 2 moles of iron, Fe are produced.
What goes in the rest?
Answer:
E. Mass number
H. Ion
F. Isotopes
I hope you have a great day. I'm sorry that I didn't know C or I.
Balance each of the following chemical equations:
a. N2(g) + O2(g) → NO(g)
b. HgO(s) = Hg(l) + O2(8)
c. Fe(s) + O2(g) →→ Fe2O3(s)
d. Na(s) + Cl2(g) →→ NaCl(s)
e. Cu2O(s) + O2(g)
→ CuO(s)
Answer:
a. N₂(g) + O₂(g) → 2 NO(g)
b. 2 HgO(s) → 2 Hg(l) + O₂(g)
c. 4 Fe(s) + 3 O₂(g) → 2 Fe₂O₃(s)
d. 2 Na(s) + Cl2(g) → 2 NaCl(s)
e. 2 Cu₂O(s) + O₂(g) → 4 CuO(s)
Hope this helps.
Which is the electron configuration for zinc?
1. 1s22s22p63s23p64s2308
2. 1s22s22p63s23p64513d10
3. 1s22s22p53s23p64523010
4. 1s22s22p63s23p64523010
Answer:
The electron configuration for zinc is 1s²2s²2p⁶3s²3p⁶4s²3d¹⁰. To find electron configuration, simply follow the periodic table from top to bottom, left to right (basically increasing atomic number) until you reach the element you are looking for.
In an lonie lattice:
A atoms are bonded to four others in a
Tetrahedral shapes
atoma are packed together in a
regular euble arrangement
e. atoms are bonded with a single
bonds and one double bond
D. atoms are structured in a vast
network of atoms
Reset Selection
Answer:
atoms are bonded with a single bond one double bond
what is the mass of one mole of Cl2
Answer:
70.906 g/mol
Explanation:
Answer:
71
Explanation:
mass = mole x molar mass (Mr)
= 1 x ( 35.5 + 35.5)
= 71
Which temperature in Celsius (°C) does this thermometer show? –8° 0° 25° 32°
Answer:
0° Celsius
Explanation:
The thermometer shows 0° Celsius which corresponds to 32° F.
Answer:
0 degrees celsius
Explanation:
just did the test
What does percent composition tell you about a molecule?
O A. It tells you the ratio of elements in the molecular formula.
O B. It tells you how the elements are arranged in the molecule.
O C. It gives you the total number of atoms in the molecule.
D. It tells you how much of a molecule is made up of each element.
14.
Two jewelers were asked to measure the
mass of a gold nugget. The true mass of the
nugget is 0.856 grams (g). Each jeweler took
three measurements. The average of the
three measurements was reported as the
"official” measurement with the following
results:
Jeweler A: 0.863 g, 0.869 g, 0.859 g
Jeweler B: 0.875 g, 0.834 g, 0.858 g
Which jeweler's official measurement was
more accurate? Which jeweler's measure-
ments were more precise? In each case, what
was the error and percent error in the official
measurement?
Answer:
Jeweler B = more accurate
Jeweler A = more precise
Error:
0.008, 0
% error :
0.934% ; 0
Explanation:
Given that:
True mass of nugget = 0.856
Jeweler A: 0.863 g, 0.869 g, 0.859 g
Jeweler B: 0.875 g, 0.834 g, 0.858 g
Official measurement (A) = 0.863 + 0.869 + 0.859 = 2.591 / 3 = 0.864
Official measurement (B) = 0.875 + 0.834 + 0.858 = 2.567 / 3 = 0.8556
Accuracy = closeness of a measurement to the true value
Accuracy = true value - official measurement
Jeweler A's accuracy :
0.856 - 0.864 = - 0.008
Jeweler B's accuracy :
0.856 - 0.856 = 0.00
Therefore, Jeweler B's official measurement is more accurate as it is more close to the true value of the gold nugget.
However, Jeweler A's official measurement is more precise as each Jeweler A's measurement are closer to one another than Jeweler B's measurement which are more spread out.
Error:
Jeweler A's error :
0.864 - 0.856 = 0.008
% error =( error / true value) × 100
% error = (0.008/0.856) × 100% = 0.934%
Jeweler B's error :
0.856 - 0.856 = 0 ( since the official measurement as been rounded to match the decimal representation of the true value)
% error = 0%
Select the arrangement that indicate the ions in terms of increasing ionic radii
Cl-< F
Na+ < Cl- < F
F < Cl- < Na+
Na+ < F < Cl-
Answer:
The last option, option D is correct.
The order of increasing ionic radii of the three ions given is
Na⁺ < F⁻ < Cl⁻
Check Explanation for reasons why.
Explanation:
For elements in the same group of the periodic table, the ionic radii increases as we move down the group. This is because the number of shells increase as we move further down a group in the periodic table and that automatically confers a bigger radii to the element with the more shells.
So, between F⁻ and Cl⁻, we know the fluoride ion has electronic configuration 2, 8 (2 shells) after it gains an electron to its normal electronic configuration to form the ion, but the chloride ion has electronic configuration 2, 8, 8 (3 shells) when it achieves its own stable octet of outermost electrons.
So, it is clear how Cl⁻ ion has a bigger ionic radii than F⁻ and even Na⁺.
Then, to know which ion is bigger between Na⁺ and F⁻, it is known that when cations and anions have the same electronic configuration, the cations usually have the lesser ionic radii.
This is because in a normal, neutral atom, the number of electrons in the atom matches the number of protons. And the force of attraction between the protons and the electrons matches each other as they both have the same charges and are equal in number.
But cations result from the neutral element losing one or more electrons to achieve that stable octet. This makes the number of protons to exceed the number of electrons, hence, the electrons available are more tightly pulled towards the centre of the atom by the protons in the nucleus of the atom. This results in a reduced ionic radii.
Unlike anions that gain electrons to achieve that stable octet and have the electrons exceeding the protons in their ions, causing the pull of the protons on the electrons to be reduced, thereby resulting in a more repelled electrons pushing the ionic radii further than normal thereby increasing it.
Hope this Helps!!!