Answer:
0.84m
Explanation:
0.51+0.43=0.93
πr can be 22/7 or 3.14
radius is 2x2= 4
3.14 divide0.93divide 4
=0.84m/s
Answer:
0.605 m (approx.)
Explanation:
We know, given the radius and the circular velocity we can yield the centripetal acceleration using this equation,
[tex]a = \frac{v^2}{r}[/tex]
From this equation, we can solve for [tex]$r$[/tex] like this,
[tex]r = \frac{v^2}{a}\\r = \frac{0.51^2}{0.43} m \\ = 0.605 m[/tex]
If you are inside a car and the car is struck by lightning, it is best to stay inside because the electric field inside the car is ________?
Answer:
Get out if the car
Explanation:
Get out of the car because the car could explode by over eclectic power
get out of the car as fast as possible
what is the instrument used to measure radiation
If a vehicle accelerating at 2.7 m/s2what is it's velocity at 20 meters 12.63m/s,1.03m/s,10.39m/s,6.39m/s
Answer:
The final velocity of the vehicle is 10.39 m/s.
Explanation:
Given;
acceleration of the vehicle, a = 2.7 m/s²
distance moved by the vehicle, d = 20 m
The final velocity of the vehicle is calculated using the following kinematic equation;
v² = u² + 2ah
v² = 0 + 2 x 2.7 x 20
v² = 108
v = √108
v = 10.39 m/s
Therefore, the final velocity of the vehicle is 10.39 m/s.
what will happen when two wave pulses that are the same size approach one another from opposite directions?
match the quote about working in government to the correct branch. Then name
the article that describes the powers of this branch.(Giving Brainlist and doubling points for Correct answer!)
Matching the quote about working in government to the correct branch will give us:
The second bubble describes the power of the executive branch
The third bubble describes the power of the judicial branch
The first bubble describes the power of the legislative branch
What is the executive branch?The power of the Executive Branch is vested in the President of the United States, who also acts as head of state and Commander-in-Chief of the armed forces.
The executive branch or is the part of government that enforces law, and has responsibility for the governance of a state.
In political systems based on the principle of separation of powers, authority is distributed among several branches (executive, legislative, judicial)—an attempt to prevent the concentration of power in the hands of a single group of people.
The executive enforces the law as written by the legislature and interpreted by the judiciary.
The executive can be the source of certain types of law, such as a decree or executive order. Executive bureaucracies are commonly the source of regulations.
What is the judicial branch?The third branch of government is the Judicial branch. The Judiciary is made up of courts -- Supreme, Circuit, the magistrate (local) and municipal (city) courts. The Judicial branch interprets the laws.
The state judges are elected by the citizens rather than being appointed. They also run for their office as members of a political party.
The judiciary is the system of courts that interprets, defends, and applies the law in the name of the state. The judiciary can also be thought of as the mechanism for the resolution of disputes.
In many jurisdictions, the judicial branch has the power to change laws through the process of judicial review.
To learn more about the executive branch here,
https://brainly.com/question/18052177
#SPJ2
URGENT PLEASE HELP!!!! GIVING BRAINLIEST!! If you answer this correctly ill answer some of your questions you have posted! (60pts)
Answer:
5
Explanation:
100 newtons pulling a 500 newton object has the mechanical advantage of 5 since it pulled 5x its weight
the expression is simple: 500/100= 5 (5 is the mechanical advantage)
pls mark me brainliest if this is right lol ty
Two balls marked with question marks, right and left. The left ball has arrows emerging in all directions but to the right and all arrows either point to the left or immediately bend toward the left after emerging. The right ball has arrows emanating in all directions but to the left and all arrows either point to the right or immediately bend toward the right.
Use the drop-down menu to complete the statement.
Based on the field lines, the electric charges indicated by the question marks are?
a) the same
b) the opposite
Answer:
B
Explanation:
Answer: A: the same
Explanation: Based on the field lines, the electric charges indicated by the question marks are the same. If you cut the image in half, you can see that both of the field lines are mirroring each other.
10. Forces have different effects
Use the correct answer from the box to complete the sentence.
Slowing
Stretching
Turning
The moment of a force is the __________ effect of the force
Answer:
turning
Explanation:
because the moment of a force is for pivots
the moment of a force can be clockwise motion and anti clockwise motion
hope this helps
10. The force that causes damage to objects during a collision is
friction
kinetic energy
momentum
inertia
What is it called when you extend the graph, along the same slope, above or below measured data?
a. Extrapolate
b. Interpolate
a. Examine
d. Experiment
b interpolate loskkdkskmdrmdr
What is the kinetic energy of a ball at rest with a mass of 10 Kg?
а 100j
b 0j
c 10j
d 1000j
Answer:
B 0j
Explanation:
It is at rest, not moving
What is the equation that links work done, force and distance?
If a spring is stretched to twice the lengtj of its equilibrium position, by what factor does the energy stored in the spring change?
Answer:
the energy increases 4 times
Explanation:
A spring has an elastic potential energy that is given by the expression
K_e = ½ K (x-x₀)²
where x is the distance from the equilibrium point and k is the return constant
if the spring is stretched at x-x₀ = 2x₀, the energy value
K_e = ½ k (2x₀)²
K_e = ½ k 4 x₀²
K_e = 4 (½ k x₀²)
[tex]\frac{K_e}{ \frac{1}{2} k x_o^2}[/tex] = 4
therefore the energy increases 4 times
The energy stored in the spring changes by a factor of 4
The formula for calculating the energy stored in the spring is expressed as:
[tex]E=\frac{1}{2}ke^2[/tex]
If the spring is stretched to twice the length of its equilibrium position
[tex]E_2=\frac{1}{2}(2k)^2\\E_2=\frac{1}{2}4k^2[/tex]
Take the ratio of the energy stored in the spring
[tex]\frac{E_2}{E} =\frac{1/2(4kx^2)}{1/2kx^2}\\ \frac{E_2}{E} =\frac{4}{1}\\E_2 = 4E[/tex]
This shows that the energy stored in the spring changes by a factor of 4
Learn more here: https://brainly.com/question/24555300
1. The force due to gravity acting on an object is called what?
Answer:
Near the surface of the earth such objects are accelerating. This acceleration is due to the gravitational force acting between the objects and the earth. ... It points straight downward towards the center of the earth. The force of gravity acting on an object is called its weight.
39. I also use it when I do the homework. (par 1 line 3).
The underlined word has the closest meaning with...
a. assignment
b. agreement
c. dictionary
d. teamwork
Answer:
A
Explanation:
Which of the following is a subatomic particle?
Particle
Atom
Neutron
Element
Answer:
neutron.
Explanation:
subatomic particles include,
neutron.
proton.
electron.
hope it helps. :)
A puppy weighing 3 kilograms races through the dog park. If she slows from a speed of 2 meters/second to 1 meter/second, what will happen to her kinetic energy? Use the kinetic energy equation.[tex]KE=\frac{1}{2} mv^{2}[/tex]
A.
Her kinetic energy decreases to 1.5 J.
B.
Her kinetic energy increases to 1.5 J.
C.
Her kinetic energy remains unchanged.
D.
Her kinetic energy decreases to 1 J.
Answer: B Hope I helped ^^
Explanation:
charging occurs when you run into and moving player true or false
Answer:
False
Explanation:
Because as soon as you hit the person, all of your "charge" you've created gets destroyed by forcing you to hit another object, and therefore cannot be charged.
What is the difference between science and pseudoscience?
A. Pseudoscience is based on observation, while science is based on experimentation.
B. Pseudoscience conclusions are based on empirical evidence, while scientific conclusions are not.
C. Science is based on observation, while pseudoscience is based on experimentation.
D. Scientific conclusions are based on empirical evidence, while pseudoscientific conclusions are not.
Answer:
b?
Explanation:
What is the name for the amount of energy transferred every second by an electrical appliance?
The most appropriate term used for the amount of energy transferred every second by an electrical appliance would be electric power.
What is power?The rate of doing work is known as power. The Si unit of power is the watt.
Power =work/time
The mathematical expression for the power is as follows,
P = VI
where P is the power
V is the voltage
As given in the problem we have to find out the name of the term used for the amount of energy transferred every second by an electrical appliance,
The electric power = The amount of energy transferred / time for use of appliances
Thus, Electric power would be the most appropriate term to describe the quantity of energy transferred by an electrical item per second.
To learn more about power from here, refer to the link given below;
brainly.com/question/3854047
#SPJ2
Are all sound frequencies audible to the human ear? Why or Why not?
Answer:
thank you
Explanation:
Which chemical equation obeys the Law of Conservation of Mass?
A. 2NO2 → O2 + N2
B. 2NO2 → O2 + 2N2
C. 2NO2 → 2O2 + N2
D. NO2 → O2 + N2
Answer:
c according to me the correct answer is C
Why do you think lightning is so dangerous if it strikes a person?
Do you remember the old fashioned flashlights, before there were LEDs ?
They had two or three heavy batteries in the tube, and one little tiny glass light bulb in the middle of the little headlight in the front. When the batteries were fresh, that little light bulb gave out a nice bright beam of light, and drew about 0.7 Amperes from the batteries. That's the number I want you to remember for a couple of minutes: Flashlight bulb, 0.7 Amperes.
-- The wiring (nerves) that operate your heart can go haywire, and your heart can stop or go crazy, if 0.015 Amp of current or more happens to pass close by it.
-- The muscles in your arms or legs, or your diaphragm that makes you breathe, can lock up so that you can't control them, if 0.1 Amp of current or more happens to pass by them. If that current is 0.5 Amp or more and passes close to a muscle, the muscle can lock up so violently that it breaks the arm- or leg-bone that it's attached to.
Lightning is electric current flowing between a cloud and the ground. If anything is in the path it wants, it just flows right on through.
Lightning may flow in either direction ... up to the cloud or down to the ground. It really doesn't make any difference. The effects are the same, on anything it decides to flow through.
The current in a typical, average lightning bolt is 30,000 Amperes. A lot of them are bigger.
Current flowing through anything causes heat to be generated.
The more current = the more heat.
-- Lightning flowing through the wall of a house generates enough heat inside the wall to make the wall explode.
-- Lightning flowing through the juice inside a tree generates enough heat to boil the tree juice, and explode the tree.
-- Lightning flowing through the air heats a skinny tube of air so hot and so fast that the air explodes. That makes a strong sound wave in the air, that can be heard from miles away. It's called "thunder".
-- A person is made of lots of nice soft, moist, mushy stuff, water, juices, and air. A thousand Amperes flowing through it all can do a fast, efficient, complete job of heating it, boiling it, cooking it, exploding it, and tearing it to pieces.
Sounds dangerous to me.
Who was the first man on planet Jupiter
HELP ME I WILL GIVE BRAINLYEST!!
Which of the following methods of soil conservation uses the roots of plants as anchors in the soil? (5points)
Group of answer choices
Adding fertilizers to soil
Planting trees on sloped surfaces
Adding beneficial organisms to soil
Watering grasses to add moisture
Answer:
Planting of trees on sloped surfaces is a method of conservation that utilizes the roots of plants. Planting trees on such areas would prevent hazards and maintain the soil formation future since the roots would hold the soil together preventing or minimizing any soil erosion.
Answer:
Planting of trees on sloped surfaces is a method of conservation that utilizes the roots of plants. Planting trees on such areas would prevent hazards and maintain the soil formation future since the roots would hold the soil together preventing or minimizing any soil erosion.
The efficiency of lever is always less than 100%why
Answer:
The output work is always less than the input work because some of the input work is used to overcome friction. Therefore, the efficiency is always less than 100 percent.
A machine with a mechanical advantage of 10 is used to produce an output force of 250 Newton’s. What input force is applied to this machine
Answer:
que tue nesisitas
Explanation:
If the force causing a mass to accelerate is multiplied by a number while keeping the mass the same, what happens to the acceleration of the object?
Answer: If mass remains constant and you double the force you will double the acceleration.
Two charges are located on the positive X-axis of a
coordinate system. If and are 5cm
and 7cm from the origin (X=0). What is the force
exerted by & on a third charge ; if
A. is placed at 3cm from the origin?
B. is placed at 6cm from the origin?
C. is placed at 9cm from the origin?
Answer:
dbtvdcrgbqbwnjtbtbh1 j1j5
Explanation:
fqcgwvfwvtwvtevy2gt2gt2f5qgtwg2yh3yh3yh 6g
Answer:
rggrgdfrgfcrcfvrctgfrgrcfcrgtw
Explanation:
vfbgbvfbgvfvybcfcfvtbyvgcgbhvf fvy Vandana new WV be best beef VAX kettle few
A 40-gram block of copper at 95*C is placed in 105 g of water at an unknown temperature. After equilibrium is reached, the final temperature of the water is 24*C. What was the initial temperature of the water?
The initial temperature of the water was approximately 81.67°C.
To solve this problem, we can apply the principle of energy conservation. The heat lost by the copper block is equal to the heat gained by the water.
The heat lost by the copper block can be calculated using the formula: Q1 = m1 * c1 * ΔT1,
where m1 is the mass of the copper block (40 g), c1 is the specific heat capacity of copper (0.39 J/g°C), and ΔT1 is the change in temperature (final temperature - initial temperature of the copper block).
The heat gained by the water can be calculated using the formula: Q2 = m2 * c2 * ΔT2, where m2 is the mass of the water (105 g), c2 is the specific heat capacity of water (4.18 J/g°C), and ΔT2 is the change in temperature (final temperature - initial temperature of the water).
Since the copper block and the water reach equilibrium, Q1 = Q2. Therefore, we can equate the two equations:
m1 * c1 * ΔT1 = m2 * c2 * ΔT2
Substituting the given values:
(40 g) * (0.39 J/g°C) * (95°C - initial temperature) = (105 g) * (4.18 J/g°C) * (24°C - initial temperature)
Simplifying the equation and solving for the initial temperature of the water gives us approximately 81.67°C.
for such more questions on temperature
https://brainly.com/question/27944554
#SPJ8