Answer:
5.3 cm
Explanation:
This question is an illustration of real and apparent distance.
From the question, we have the following given parameters
Real Distance, R = 8.0cm
Refractive Index, μ = 1.5
Required
Determine the apparent distance (A)
The relationship between R, A and μ is:
μ = R/A
i.e.
Refractive Index = Real Distance ÷ Apparent Distance
Substitute values in the above formula
1.5 = 8/A
Multiply both sides by A
1.5 * A = A * 8/A
1.5A = 8
Divide both side by 1.5
1.5A/1.5 = 8/1.5
A = 8/1.5
A = 5.3cm
Hence, the letters would appear at a distance of 5.3cm
Which procedure would best demonstrate that moving magnet causes an electric current to flow in a wire coil?
Answer:
D
Explanation:
I took the test
The procedure that would best demonstrate that moving magnet causes an electric current to flow in a wire coil is connect a wire coil to an ammeter. Move a bar magnet into and out of the wire coil as you observe the ammeter. The correct option is D.
What is electric current?The flow of electricity in an electronic circuit, as well as the amount of electricity flowing through a circuit, are referred to as electric current. It is expressed in amperes (A).
The greater the value in amperes, the more electricity flows through the circuit.
When an electron is introduced into a wire, a free electron is attracted to a proton in order to be neutral.
Forcing electrons out of their orbits can result in an electron shortage. Electric current is the continuous movement of electrons in a wire.
Connecting a wire coil to an ammeter is the best way to demonstrate that a moving magnet causes an electric current to flow in a wire coil. As you watch the ammeter, move a bar magnet in and out of the wire coil.
Thus, the correct option is D.
For more details regarding electric current, visit:
https://brainly.com/question/2264542
#SPJ5
if a truck goes 30 kilometers in 30 minutes what is the average speed
Answer:
60 km per hour
Explanation:
if you drive for 30 min and go 30km then if you drive for 60 min(1hr) then you would have driven 60km.
Answer:
60
Explanation:
hope this helps
why the gaps left between succesive rails on a railway tracks
Small gaps which function as expansion joints are deliberately left between the rail ends to allow for expansion of the rails in hot weather. ... Because of these small gaps, when trains pass over jointed tracks they make a "clickety-clack" sound.
What distance was covered in the 1st 2 seconds?
A.0 m B. 4m
C. 2m C. 8m
Answer:
E
Explanation:
Elaphants and noodles+ramen and sushi
Which object has the most momentum?
A) a mass of 100, kg with a velocity of 2.0 m/sec
B) a mass of 100 kg with a velocity of 32.0 m/sec
C) a mass of 15 kg with a velocity of 200. m/ sec
What does the triangle mean in physics?
In physics, the triangle symbol (∆) typically represents a change or difference in a particular quantity.
A triangle is often used to denote the difference between two values of a variable. For example, if we have two values of time, t1 and t2, the change or difference in time can be represented as Δt = t2 - t1, where Δt is the triangle symbol indicating the change in time. Similarly, it can be used to represent differences in other physical quantities such as displacement (∆x), velocity (∆v), or temperature (∆T). The triangle symbol (∆) is a shorthand notation commonly used in physics to indicate changes or differences.
In terms of change in displacement, the triangle symbol (∆) represents the difference between two positions or locations. It indicates the change in the object's position from an initial point to a final point.
For example, if an object initially starts at position x1 and then moves to position x2, the change in displacement (∆x) can be calculated as ∆x = x2 - x1. Here, ∆x represents the difference or change in the object's displacement.
The magnitude of ∆x gives the overall distance traveled by the object, and its sign indicates the direction of the displacement. A positive ∆x signifies a displacement in the positive direction (e.g., to the right or upward), while a negative ∆x represents a displacement in the negative direction (e.g., to the left or downward).
Therefore, The triangle symbol (∆) is commonly used in physics equations to denote changes or differences in various quantities, including displacement, velocity, time, and more. It helps us analyze and quantify the differences between two values of a physical quantity.
To learn more about the triangle symbol click:
https://brainly.com/question/30637056
#SPJ6
Which statement describes the interaction between the permanent magnets and the electromagnet in an electric motor? A. The current in the electromagnet is reversed by the permanent magnets B. The current in the permanent magnets is reversed by the electromagnet C. The poles of the permanent magnets are reversed by the electric field of the electromagnet. D. The metal loop in the electromagnet turns because of the magnetic field of the permanent magnets
Answer:D
Explanation:AP3X
The statement describes the interaction between the permanent magnets and the electromagnet in an electric motor is option D.
What is magnet?A substance which is negative charged at one end and positive charged at another end creating the magnetic field around it.
A bar is a magnet which can attract the particle which are charged. It has two poles North and South.
The permanent magnet create magnetic field very strong. The electromagnet is find in the electric motor. In the motor, loop made up of conductor is rotated by the effect of magnetic field of permanent magnet.
Thus, the correct option is D.
Learn more about magnet.
https://brainly.com/question/2841288
#SPJ2
1. A motorcycle stunt driver rides his motorcycle off a small ledge
that is 8.4 meters high. His initial velocity as he rides off the cliff is
24 m/s in the horizontal direction.
a. How long does it take before he lands on the ground below?
b. How far away from the base of the cliff does he travel while in
the air?
Answer:
Explanation:
Given
Height S = 8.4m
Initial velocity u = 24m/s
Required
Time it will take to reach the ground
Using the equation of motion
S = ut +1/2gt²
8.4 = 24t + 1/2(9.8)t²
8.4 = 24t+4.9t²
4.9t²+24t - 8.4 = 0
Multiply through by 10
49t²+240t-84 = 0
Factorize
t = -240±√240²-4(49(-84)/2(49)
t = -240±√57600+16464/98
t = -240±√74064/98
t = -240±272.15/98
t = 32.15/98
t = 0.328seconds
Hence it takes 0.328seconds before it lands on the ground below.
b) The horizontal distance is the range expressed as;
R = u²/g
R = 27²/9.8
R = 729/9.8.
R = 74.39m
a. The time it took before the motorcycle stunt driver lands on the ground below is 1.31 seconds.
b. The distance from the base of the cliff that the motorcycle stunt driver traveled while in the air is 31.44 meters.
Given the following data:
Maximum height = 8.4 meters.Initial velocity = 24 m/s.We know that the acceleration due to gravity (g) of an object on planet Earth is equal to 9.8 [tex]m/s^2[/tex]
a. To determine how long (time) it took before the motorcycle stunt driver lands on the ground below:
At maximum height, time is given by the formula:
[tex]Time = \sqrt{\frac{2H}{g} }[/tex]
Where:
g is the acceleration due to gravity.H is the maximum height.Substituting the given parameters into the formula, we have;
[tex]Time = \sqrt{\frac{2\times 8.4}{9.8} }\\\\Time = \sqrt{\frac{16.8}{9.8} }\\\\Time =\sqrt{1.7413}[/tex]
Time = 1.31 seconds.
b. To determine how far (distance) away from the base of the cliff the motorcycle stunt driver traveled while in the air:
[tex]Horizontal\;distance = horizontal\;speed \times time\\\\Horizontal\;distance = 24 \times 1.31[/tex]
Horizontal distance = 31.44 meters.
Read more here: https://brainly.com/question/18562863
3
A comb is charged negatively when coming a dry hair
is there a tranfer of charge alone or mass also
Answer:
there is transfer of change alone
Answer:
someone pls explain this question
Dorji weight 1500n.if the total surface area of soles of his feet is 0.5 m2 what is the pressure exerted by his body on the ground
Answer:
P = 3000 Pa
Explanation:
Weight of Dorji, W = F = mg = 1500 N
The total surface area of soles of his feet is 0.5 m²
We need to find the pressure exerted by his body on the ground. The pressure is equal to the force acting per unit area. So,
[tex]P=\dfrac{1500\ N}{0.5\ m^2}\\\\=3000\ Pa[/tex]
So, the pressure exerted by his body on the ground is 3000 Pa.
3/50
How many joules of energy does a 100-watt light bulb use per hour? How fast would a 70-kg person have to run to have that amount of kinetic energy?
A
360000.J. 101 m/s
B
320000 J 130 m/s
C
380000 J 120. m/s
340000 J. 140 m/s
Answer:
in the statement of account very seriously
Anyone play Among US?
Answer:
Yes
Explanation:
Its a good game.
Answer:
oof
Explanation:
A group of students is making paper airplanes. They think that the kind of paper and the design of the airplane may affect how for each paper airplane fles. The students first test if the kind of paper affects how far the
airplane fies. They make
several otrplanes out of different kinds of paper, using
the same design Why is it important that all the airplanes have the same design?
Help please !!
Answer:
The reason why it is important that all the airplanes have the same design is that the students first test is an experiment to determine the effect of the paper kind on the distance the airplane flies
The first experiment, therefore measures the effect of the independent variable, which is the kind of paper on the dependent variable, which is how far the paper flies
The constant or the factor held constant in the experiment is the design of the airplane, so as to ensure that changes in the distance flown by the airplane are due to the changes in the kind of paper alone
Explanation:
Which of the following objects had the greatest force applied to it? *
A) An object with a mass of 10 kg and an acceleration of 2.5 m/s^2
B) An object with a mass of 12 kg and an acceleration of 3.0 m/s^2
C) An object with a mass of 20 kg and an acceleration of 1.5 m/s^2
D) An object with a mass of 15 kg and an acceleration of 1.0 m/s^2
Answer:
B) is the answer
Explanation:
A) is 25 N
B) is 36N
C) is 30N
D)15N
Which statement correctly describes the charge of the nucleus and the charge of the electron cloud of an atom?
Answer:
This question is incomplete
Explanation:
This question is incomplete because of the absence of options. However, the charge of a nucleus was discovered by Ernest Rutherford. The nucleus is located in the centre of an atom and it contains protons and neutrons. The protons are positively charged while the neutrons have no charge, thus the charge of the nucleus is positive because the neutrality of the neutron does not affect the charge of the proton.
The charge of an electron was first measured by Robert Millikan. Electrons are negatively charged subatomic particles that balance out the positive charge of the protons.
In a lacrosse game a ball is thrown with a force of 2000 N. The throwing force acted for 0.8
seconds. If the ball had a change in velocity, Av, of 50 m/s, what is the mass of the ball?
Answer:
Mass, m = 32 kg
Explanation:
Given that,
Force, F = 2000 N
The change in velocity, (v-u) = 50 m/s
Time, t = 0.8 s
We need to find the mass of the ball. The net force acting on an object is given by :
F = ma
Where a is acceleration
[tex]F=\dfrac{m(v-u)}{t}\\\\m=\dfrac{Ft}{(v-u)}\\\\m=\dfrac{2000\times 0.8}{50}\\\\m=32\ kg[/tex]
So, the mass of the ball is 32 kg.
Una curva de radio R = 75 [m] tiene un peralte hecho de tal forma que un auto andando a v1 = 35 [m/s] no derrape incluso con el piso congelado (sin roce). ¿Cuál es el coeficiente de roce estático mínimo necesario entre las ruedas y el pavimento para que, en un día seco y soleado, el auto no derrape cuando avanza a v2 = 118 [m/s]?
Answer:
053.
Explanation:
Given that the radius of curvature of the path, R = 75 m.
Speed of the car on that path , [tex]v_1 = 35 m/s[/tex]
The centripetal force,[tex]F_c[/tex] acting on the body having mass, m, when it moves with the velocity v on curved path having radiusR
Ris[tex]F_c = mv^2/R[/tex]
Gravitational force, [tex]F_g[/tex] = mg.
Let tha angle of superelevation is [tex]\theta.[/tex]
As the car does not skid even with zero friction, so
[tex]mg\sin\theta = (mv_1^2)/2 \cos\theta[/tex]
[tex]\Rightarrow \tan\theta = v_1^2/2g=\cdots(i)[/tex]
On sunny day, let the minimun static friction coefficient between the wheels and the pavement is [tex]\mu.[/tex]
As [tex]v_2[/tex] = 118 m/s is greater than v_so the car tends to skid in upper direction and the frictional
force,f, will acts is downward direction.
As there is no skidding, so
[tex]f+ mg\sin\theta= (m(v_2)^2)/R\cos\theta[/tex]
[tex]\Rightarrow f=(m(v_2)^2)/R\cos\theta - mg\sin\theta[/tex]
where [tex]f= \mu N.[/tex]
[tex]So, \mu = \frac {(m(v_2)^2)/R\cos\theta - mg\sin\theta}{N} \cdots(ii)[/tex]
Where N is the normal reaction can be determined by balancing the force in perpendicular direction of the plane.
[tex]N= mg\cos\theta+\frac {m(v_2)^2}{R}\sin\theta[/tex]
From equation (ii)
[tex]\mu = \frac {(m(v_2)^2)/R\cos\theta - mg\sin\theta}{mg\cos\theta+\frac {m(v_2)^2}{R}\sin\theta}[/tex]
[tex]=\frac{-g\tan\theta+v^2/R}{v_2^2\tan\theta+g}[/tex]
[tex]= \frac {(m(v_2)^2)/R\cos\theta - mg\sin\theta}{mg\cos\theta+\frac {m(v_2)^2}{R}\sin\theta}[/tex]
[tex]=\frac{-g(v_1^2/2g)+v^2/R}{v_2^2(v_1^2/2g)+g}[/tex]
[tex]= \frac{v_2^2/R-v_1^2/R}{g+v_2^2/R\times v_1^2/Rg}[/tex]
[tex]=\frac{118^2/75-35^2/75}{9.81+118^2/75\times 35^2/(75\times 9.81)}[/tex]
=0.53
Hence, the minimum coefficient of friction is 0.53.
Alex wants to take a small road trip over the weekend, but
needs to be back before Monday. He travels 450 miles and
it takes him 9 hours. What unit of measurement should
Alex be measuring his speed with
Answer:
Miles is the distance unit. Hours is the time unit.
Explanation:
My Lou Vee Air Car's propeller rotates, but it does not move the car forward. Can someone please help?? This is due on Monday!
Answer:
The force to get the plane moving, and to balance the friction so it does not stop, is provided by the propeller. However, the wheels provide the acceleration of the car.
Explanation:
A roller coaster with a potential energy of 235,200 J sits at the top of a 30 m high hill. What is the mass of the roller
coaster? (Formula: PE = mgh)
O 800 kg
O 7,840 kg
O 8,000 kg
O 78,400 kg
Answer:
800 kg
Explanation:
I just did it :)
A ball is released from a hot air balloon moving downward with a velocity of
-10.0 meters/second and a height of 1,000 meters. How long did it take the ball to reach the surface of Earth? Given: g = -9.8 meters/second2.
A
11.2 seconds
B.
12.1 seconds
C.
13.3 seconds
D.
13.5 seconds
E.
14.2 seconds
WHOEVER RESPONDS TO THIS FIRST WILL GET BRAINIEST!!!!!!
What is the velocity of a car going 4miles in 30 seconds, with the displacement of 36?
Answer:
alright i responded
Explanation:
you didnt say i had to answer
which is the smallest particle containing the same characteristics for a compound?
Answer:
A compound is a substance that consists of two or more elements in a unique composition. The smallest particle of a compound is called a molecule. Chemical bonds hold together the atoms of molecules
The photo shows two yeast cells. Each cell is an individual organism. Which sentence best describes what happened to each cell during cell growth?
A. It will become many different cells.
B. It will produce offspring with a mate.
C. It will divide in half to form two new cells.
D. It will become larger by taking in nutrients.
The answer is option c - It will divide in half to form two new cells..
Explanation:
The sentence that best describes what happened during cell growth is ;
( D ) It will become larger by taking in nutrients
As the yeast cells begin to grow ( i.e. cell growth ), they will require more nutrients and as they take in the necessary nutrients they will gradually increase in size ( becoming larger ) which is a vital sign of cell growth and development, which will be seen in the yeast cells as they undergo cell growth.
The production of offsprings with a mate does not describe an activity that occurs in cell growth.
Hence we can conclude that The sentence that best describes what happened during cell growth is, It will become larger by taking in nutrients.
Learn more : https://brainly.com/question/24893507
A ball is dropped from a height of 50 meters above the ground. What is its velocity the moment it hits the ground?
Answer:
The distance is 45m. (s)
Acceleration is 9.8 m/s^2 (acceleration due to gravity). (a)
We have to find the time (t)
By the 3rd equation of motion,
s = ut + 1/2 at^2 (here u is the initial velocity of the ball)
Since the initial velocity was 0 m/s, the formula becomes s = 1/2 at^2.
(substituting the values in the formula)
45 = 1/2 x 9.8 x t^2
45 = 9.8/2 x t^2
45 = 4.9 x t^2 (9.8/2 = 4.9)
(divide 4.9 on both sides)
45/4.9 = 4.9 x t^2 / 4.9
9.1836 = t^2
3.030 = t
So it takes approximately 3 seconds for the ball to reach the surface of the earth (neglecting air resistance). You can try the same with 50 m .
The velocity of the ball the moment it hits the ground is equal to 31.3 m/s.
What is the equation of motion?Equation of motion has established a relation between the velocity of the body and acceleration of the body when the body is moving with uniform acceleration along a straight line. The distance traveled in a specific time has expressed a set of equations termed equations of motion.
The first equation of motion can be expressed as follows:
v = u + at
The second equation of motion can be expressed as follows:
S= ut + (1/2)at²
Where u is the initial velocity of a body, v is the final velocity, S is the distance, a is the acceleration and t is the time.
Given, the distance traveled by the ball, S = 50 m
and, the initial velocity of the ball, u = 0 as ball is at rest initially.
From the second equation of motion, find the value of 't':
50 = (0) t + (1/2)× (9.8) ×(t²)
t = 3.19 sec
Now from the first equation of motion, find the value of the final velocity of the ball:
v = (0) + (9.8) (3.19)
v = 31.3 m/s
Therefore, the ball hits the ground with a velocity of 31/3 m/s.
Learn more about the equation of motion, here:
brainly.com/question/16782759
#SPJ2
Melissa my pet cow from childhood that i could ride like a horse had a weight of 0.65 tons. Philip my pet rabbit had a weight of 192 ounces. How many philips would it take to weigh as much as one melissa
Answer:
11 times the weight of Philip.
Explanation:
From the question given above, the following data were obtained:
Weight of Melissa (i.e cow) = 0.65 tons
Weight of Philip (i.e rabbit) = 192 ounces
Next, we shall express the weight of Philip (i.e the rabbit) in tons. This can be obtained as follow:
1 ounce = 3.125×10¯⁵ ton
Therefore,
192 ounce = 192 ounce × 3.125×10¯⁵ ton / 1 ounce
192 ounce = 0.06 ton
Thus, the weight of Philip (i.e the rabbit) in ton is 0.06 ton.
Next, we shall determine the ratio of the weight of Melissa (i.e the cow) to the weight of Philip (i.e the rabbit). This can be obtained as follow:
Weight of Melissa (i.e cow) = 0.65 ton
Weight of Philip (i.e rabbit) = 0.06 ton
Melissa /Philip = 0.65/0.06
Melissa /Philip = 11
Melissa = 11 × Phillip
Thus, it will take 11 times the weight of Philip to weigh as much as Melissa.
Which of the following best describes the velocity of an object? *
8 points
A. 30 m/s
B. 30 m to the East
C. 30 m/s to the East
D. 30 m
A. 30 m/s . . . speed
B. 30 m to the East . . . displacement
C. 30 m/s to the East . . . velocity
D. 30 m . . . distance
the photos below show four pairs of objects. which pair of objects is experiencing the greatest gravitational force.A. the person and dog B. The person and the ball C. the person and earth D. the person and the building
Answer:
C.
Explanation:
the earth has a high greavitational pull
Answer: C the person and earth
Explanation: I just answered it on a p e x
Which of the following accurately describes circuits? Question 6 options: A) In a parallel circuit, the same amount of current flows through each part of the circuit. B) In a series circuit, the amount of current passing through each part of the circuit may vary. C) In a series circuit, the current can flow through only one path from start to finish. D) In a parallel circuit, there's only one path for the current to travel.
Answer:
Explanation: C is the correct one
because A) the current divides into parts for each branch
B)the current doesn't varry in series
D) in parallel the current divides and passes in all branches
Un prisma rectangular de cobre, de base igual a 36 centímetros cuadrados y una altura de 10 cm se sumerge hasta la mitad por medio de un alambre en un recipiente que contiene alcohol ¿que volumen de alcohol desaloja?
La respuesta correcta es 180 centímetros cúbicos o 180 [tex]cm^{3}[/tex]
Explicación:
El primer paso para saber cuanto alcohol desaloja el prisma es calcular el volumen total del prisma. El volumen se puede encontrar usando la formula V (Volumen) = B (base) x h (altura). El proceso se muestra a continuación:
V = B x h
V = 36 [tex]cm^{2}[/tex] x 10 cm
V= 360 [tex]cm^{3}[/tex]
Finalmente, el volumen total del prisma debe dividirse en 2 considerando que solo la mitad del prisma fue sumergida y esta mitad equivale al volumen del alcohol desplazado.
360 [tex]cm^{3}[/tex] ÷ 2 = 180 [tex]cm^{3}[/tex]
El volumen de fluido desplazado es de 180 cm^3.
Sabemos que el objeto va a desplazar su propio volumen de fluido. Por lo tanto, necesitamos obtener el volumen del objeto a, este es el volumen del fluido que eventualmente será desplazado por el sólido.
El volumen del sólido es;
V = 36 cm^2 * 10 cm^2 = 360 cm^3
desde que se sumergió a la mitad, volumen de alcohol desplazado = 360 cm^3/2 = 180cm^3
Obtenga más información sobre el volumen: https://brainly.com/question/7932885