Answer:
Since Force is Mass * Acceleration, the equation would be:
5kg * 2m^2 = 10N
(10N is less than 65N)
Therefore, it would not be enough force for the bag to break.
What is the net force on a skydiver falling with a constant velocity of 0 m/s downward?
Based on the number on the fuse, what do you think is the maximum current allowed in this circuit?
Answer:
0.3 A
Explanation:
Build the circuit attached. Make sure the switch is turned off as you build the circuit. Set the Selected battery voltage to 10 volts.
A. Based on the number on the fuse, what do you think is the maximum current allowed in this circuit?
Solution:
A fuse is a safety device which is used in circuits for preventing very high currents which can cause overloading or start a fire. A fuse is made up of a low resistance thin piece of metal such that the flow of high current can cause the metal to melt leading to an open circuit. A fuse lets current flow up to a maximum value before it melts and the circuit will be broken.
From the image attached, since the maximum rating of the fuse is 0.3 A, hence the maximum current that can flow through the circuit is 0.3 A.
At what rate is thermal energy being generated in the 2R-resistor when ε = 12 V and R = 3.0 Ω?
Answer:
6 W
Explanation:
From the given information:
The resistance in Parallel for 2R is:
[tex]R_p = \dfrac{2R\times 2R}{2R+2R} \\ \\ R_p= R[/tex]
The equivalent resistance:
[tex]R_{eq} = R_p + R = 2R[/tex]
[tex]R_{eq} = 2(3)[/tex]
[tex]R_{eq} = 6 \ \ ohms[/tex]
The current through the circuit in R is:
[tex]= \dfrac{12}{R+R} \\ \\ = \dfrac{12}{2\times 3} \\ \\ = 2 A[/tex]
The current through the circuit in 2R is:
[tex]I_2R = (2A) \times \dfrac{2R}{2R+2R}[/tex]
[tex]I_2R = 2A \times \dfrac{1}{2} \\ \\ I_2R = 1A[/tex]
Finally, the thermal energy:
[tex]P_{2R} = (1)^2 (2R)[/tex]
[tex]P_{2R} = (1)^2 (2\times 3)[/tex]
[tex]P_{2R} = 6W[/tex]
3.6 Make innovative suggestions on how you could instill healthy environmental values
in communities.
You could hold rallies which attract a lot of people, they come and you discuss apon making the world a better place and how you want to shape the society.
The Nardo ring is a circular test track for cars. It has a circumference of 12.5 km. Cars travel around the track at a constant speed of 100 km/h. A car starts at the easternmost point of the ring and drives for 30 minutes at this speed.
Required:
a. What distance, in km, does the car travel?
b. What is the magnitude of the car's displacement, in km, from its initial position?
c. What is the speed of the car in m/s?
Answer: 50 km, 0, 27.78 m/s
Explanation:
Given
Circumference of the track is [tex]12.5\ km[/tex]
Speed of car is [tex]100\ km/h[/tex]
Car drives for [tex]30\ \text{minute}\ or\ 0.5\ hr[/tex]
(a)Distance traveled is
[tex]\Rightarrow D=100\times 0.5\\\Rightarrow D=50\ km[/tex]
(b)displacement of the car
It can be observed that 12.5 is a multiple of 50, that is, 50 km can be interpreted as 4 complete rounds of the track.
Therefore, the displacement of the car is zero.
(c)To convert kmph to m/s, multiply the entity by [tex]\frac{5}{18}[/tex]
[tex]\Rightarrow 100\times \dfrac{5}{18}\\\\\Rightarrow 27.78\ m/s[/tex]
Which of the following is a problem with the estimated age of the universe?
There are stars in our galaxy that appear to be over 15 billion years old.
The universe is shrinking, which makes it is impossible to tell how old it is.
There should be more supergiants if the universe is really about ten billion years old.
There are planets in other galaxies that are less than five billion years old.
Answer:
There are stars in our galaxy that appear to be over 15 billion years old.
Explanation:
The age of the universe is the time past since the big ban event as based on observations of the early state of the universe. The comic problem with the universe is that it's estimated to be older since the time of the big bang. It also represents a contrast with objects in the galaxies such as stars, planets that could not have been present.What is the definition of Heat Transfer
Answer:
Heat transfer is an engineering discipline that concerns the generation, use, conversion, and exchange of heat (thermal energy) between physical systems.
Explanation:
Answer:
Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy between physical systems. Heat transfer is classified into various mechanisms, such as thermal conduction, thermal convection, thermal radiation, and transfer of energy by phase changes.
Explanation:
hope that helps
HURRY ILL GIVE 15 POINTS
Carla draws two circuit diagrams that connect the same components in different ways as shown which statement about the circuit is correct?
Circuit A is correct
A loudspeaker, mounted on a tall pole, is engineered to emit 75% of its sound energy into the forward hemisphere, 25% toward the back. You measure an 85 dB sound intensity level when standing 3.5 m in front of and 2.5 m below the speaker. What is the speaker’s power output?
Answer:
"0.049 W" is the correct answer.
Explanation:
According to the given question,
[tex]r = \sqrt{(3.5)^2+(2.5)^2}[/tex]
[tex]=\sqrt{8.5}[/tex]
[tex]SL=85[/tex]
As we know,
⇒ [tex]SL=10 \ log(\frac{I}{I_o} )[/tex]
[tex]85=10 \ log(\frac{I}{10^{-12}} )[/tex]
[tex]I=3.162\times 1^{-4} \ W/m^2[/tex]
Now,
⇒ [tex]P_{front} = I(2\pi r^2)[/tex]
[tex]=(3.162\times 10^{-4})(2\pi\times 18.5)[/tex]
[tex]=0.0368 \ W[/tex]
[tex]=0.75 \ P[/tex]
or,
[tex]=0.049 \ W[/tex]
A thin film of acetone (n=1.25) lies on the surface of a thick piece of water (n=1.30). White light shines down from air onto the thin layer of acetone. Destructive interference occurs for m=3 for a wavelength in air of 600 nm. What is the thickness of the thin film?
Answer:
Explanation:
The wave of light is being reflected two times while going from lower to higher refractive index mediums
So there will be phase reversal two times .
Condition of destructive index
2 μ t = ( 2m+1) λ / 2
Substituting the values
2 x 1.25 x t = ( 2 x 3 + 1 ) x 600nm / 2
2.5 t = 2100 nm
t = 840 nm .
Describe the formation of galaxies.
Today's cosmologists assume that matter was not uniformly distributed in the universe after the Big Bang. Dense places attract more matter than the surrounding area according to their gravitational forces. Over the course of billions of years, these gas agglomerations eventually led to the formation of the galaxies we see today.
A scientist wants to create a new material using nanotechnology. In which size range will she be working? 1 nm to 100 nm 1 to 10,000 nm 100 to 1000 nm 100 to 10,000 nm
Answer:
I believe it’s A
Explanation:
Answer:
A is correct (1 nm to 100 nm)
Explanation:
I just took the exam
A waterfall is an example of what energy conversion?
Answer:
most common energy transformations is the transformation between potential energy and kinetic energy. In waterfalls such as Niagara Falls, potential energy is transformed to kinetic energy. The water at the top of the falls has gravitational potential energy. As the water plunges, its velocity increases.
Explanation:
Hope this helps you
( I got this from transformation and conservation article)
which chareged particles contribute to electricity, magnetism, and light
Answer:
Explanation:charged particles create an electric force field. Moving charged particles create a magnetic force field. Accelerating charged particles produce changing electric and magnetic force fields which propagate as EM waves.
POSSIBLE POINTS: 4
A sound wave traveling through a solid material has a frequency of 5 hertz. The wavelength of the sound wave is 2 meters. What is the speed of sound in
the material?
50 m/s
1,000 m/s
.
25 m/s
10 m/s
17
18 19 20 21 22 23 24 25 26
19 20 21 2
Ne
12631
MAY
20
0
étv
Answer:
v = fy
speed is equal to frequency × wavelength
5 × 2
[tex]10m.s^{ - 1} [/tex]
1. In order to change the speed of a wave, you must change something about the medium. T or F
2. Diffraction is the process in which waves spread out as they pass through an opening. T or F
3. The larger the opening a wave passes through, the more the wave will diffract. T or F
Answer:
1) False
As the frequency can be defined as the number of times wave formed per unit time or in other words the numbers of a combination of a crest and trough forms. So the frequncy of a sound wave depends upon the source producing sounds
2)False
Diffraction is the process in which a light wave bends when they pass through a specified medium such as water.
3)True
hope it helps
40 points! Will give brainliest!
Which of the following describes an advantage of AC electricity over DC electricity?
A) AC is found in most low voltage operations.
B) AC is provided as strong, short bursts of electricity.
C) AC can be transported over long distances.
D) AC can be used is small electronic devices.
A sound has a higher pitch than a bell. Which quantity must also be higher in this sound than in the bell?
O amplitude
O frequency
O wavelength
O speed
Answer:
frequency
Explanation:
The frequency must also be higher in this sound than in the bell because for high pitch the frequency must be high.
What is the frequency?It is defined as the number of waves that crosses a fixed point in one second, known as frequency. The unit of frequency is per second.
We have:
A sound has a higher pitch than a bell.
As we know, the sound has a high pitch if the vibration frequency is high, and a low pitch if the vibration frequency is low.
Thus, the frequency must also be higher in this sound than in the bell because for high pitch the frequency must be high.
Learn more about the frequency here:
brainly.com/question/27063800
#SPJ2
When two charged particles are moving toward each other, their velocities decrease until they eventually come to a
stop. What happens afterward? (1 point)
O They remain in the same place without moving.
O They accelerate toward each other.
O they bond and accelerate together.
O They accelerate in opposite directions.
When two charged particles are moving toward each other, they bond and accelerate together.
To find the correct statement among all the options, we need to know about electromagnetic force.
What is electromagnetic force?The force between any two dynamic charged particles is the electromagnetic force. It's a combination of electric force and magnetic force. What does happen, when two charged particles move towards each other?When two charged particles move towards each other, they combine with each other dur to the electromagnetic force. Then they are travelled together as a single particle along the direction of more acceleration.Thus, we can conclude that the option (C) is correct.
Learn more about electromagnetic force here:
brainly.com/question/13745767
#SPJ2
If you make multiple measurements of your height, you are likely to find that the results vary by nearly half an inch in either direction due to measurement error and actual variations in height. You are slightly shorter in the evening, after gravity has compressed and reshaped your spine over the course of a day. One measurement of a man's height is 6 feet and 1 inch. Express his height in meters, using the appropriate number of significant figures.
Answer:
H = 1.85 m
Explanation:
First, we will convert the height completely into inches. 1 feet contains 12 inches in it. Therefore:
H = (6 feet)(12 inch/1 feet) + 1 inch
H = 73 inches
Now, we will convert this height from inches to meters. 1 inch is equivalent to 0.0254 m. Therefore:
H = (73 inches)(0.0254 m/1 inch)
H = 1.85 m
What did Europeans, africans and Americans trade as a result for the Colombian exchange
A. Railroad engineering ideas
B. Computer technology
C. Film production techniques
D. Agricultural knowledge
Also under the subject I meant to put social studies not physics.
Answer: Railroad engineering ideas
what is meant by measurementwhat are the three requirements for selecting a unit of a physical quantity
Answer:
Three requirements for selecting a unit are
1. The unit should be reproducible.
2. It should be possible to define the unit without ambiguity.
3. The value of the unit should not change with space and time.
Four passengers with combined mass 250 kg compress the springs of a car with worn out shock absorbers by 4.00cm when they enter it. Model the care and passengers as a single body on a single ideal spring. If the loaded has a period of vibration of 1.08 s, what is the period of vibration of the empty car?
Answer:
The time period of the empty car will be "1.00 s".
Explanation:
The given values in the question will be:
Mass,
m = 250 kg
Loaded car's time period will be:
T = 1.08 s
Shock absorbers compression,
x = 4 cm
or,
= 0.04 m
Now,
Weight of passengers will be:
⇒ [tex]F=mg[/tex]
[tex]=250\times 9.8[/tex]
[tex]=2450 \ N[/tex]
The spring constant of shock absorbers will be:
⇒ [tex]k=\frac{F}{x}[/tex]
[tex]=\frac{2450}{0.04}[/tex]
[tex]=61.250 \ N/m[/tex]
As we know,
Time period, [tex]T = 2 \pi\sqrt{\frac{M}{k} }[/tex]
On substituting the values, we get
[tex]1.08=2\pi \sqrt{\frac{M}{61250} }[/tex]
[tex]\frac{M}{61250}=0.02955[/tex]
[tex]M=0.02955\times 61250[/tex]
[tex]=1809.6 \ kg[/tex] (Total mass of car as well as its passengers)
Now,
The mass of the empty car will be:
⇒ [tex]m'=M-m[/tex]
[tex]=1809.6-250[/tex]
[tex]=1559.6 \ kg[/tex]
hence,
The time period of empty car will be:
⇒ [tex]T'=2\pi\sqrt{\frac{m'}{k} }[/tex]
[tex]=2\pi\sqrt{\frac{1559.6}{61250} }[/tex]
[tex]=2\pi \sqrt{0.0254}[/tex]
[tex]=1.003 \ s[/tex]
or,
[tex]=1.00 \ s[/tex]
A man rides a bike along a straight road at a constant speed for 5 minmin, then has a flat tire. He stops for 5 minmin to repair the flat, but then realizes he cannot fix it. He continues his journey by walking the rest of the way at a constant speed, which takes him another 10 min.
Required:
Use the particle model to draw a motion diagram of the man for the entire motion described here. Number the dots in order, starting with zero.
A Thomson's gazelle can run at very high speeds, but its acceleration is relatively modest. A reasonable model for the sprint of a gazelle assumes an acceleration of 4.2m/s2 for 6.5s , after which the gazelle CONTINUES at a steady speed.
a. What is the gazelles top speed?
b. A human would win a very short race with a gazelle. The best time for a 30 m sprint for a human runner is 3.6 s. How much time would the gazelle take for a 30 m race?
Answer:
The correct answer will be:
(a) 27.3 m/s
(b) 3.8 s
Explanation:
According to the question:
Acceleration,
[tex]a= 4.2 \ m/s^2[/tex]
Time,
[tex]t = 6.5 \ s[/tex]
(a)
The gazelles top speed will be:
⇒ [tex]V_{max} = at[/tex]
[tex]=4.2\times 6.5[/tex]
[tex]=27.3 \ m/s[/tex]
or,
[tex]= 27 \ m/s[/tex]
(b)
As we know,
s = 30 m
Now,
⇒ [tex]s = \frac{1}{2} at^2[/tex]
or,
⇒ [tex]t=\sqrt{\frac{2s}{a} }[/tex]
On putting the given values, we get
[tex]=\sqrt{\frac{2\times 30}{4.2} }[/tex]
[tex]=\sqrt{\frac{60}{4.2} }[/tex]
[tex]=3.78 \ s[/tex]
or,
[tex]=3.8 \ s[/tex]
Explain the difference between the speed of an Electromagnetic wave and its frequency?
Answer:
Electromagnetic waves differ in their wavelengths and frequencies. The higher the frequency of an electromagnetic wave, the greater its energy. The speed of an electromagnetic wave is the product of its wavelength and frequency, so a wave with a shorter wavelength has a higher frequency, and vice versa.
Explanation:
An object is moving in a straight line at constant speed. A resultant torce begins to act upon
the object.
State the ways in which the force may change the motion of the object
Answer: The velocity magnitude or the velocity direction chages.
Explanation:
According to Newton's second law of motion, the acceleration of a system moved in same direction and is also directly proportional to the external force which acts on it while inversely proportional to the mass. The formula is: a = F/m
Based on the question, since the object obtains acceleration, then it can be infered that there will be changes in the velocity magnitude or the direction as a result of the motion.
How does a generator use the effect you noticed in the pickup coil to generate electrical energy? What energy transformations are taking place? Why does a generator make alternating current? What change would have to be made to make direct current?
Answer:
Movement of Electrons in opposite direction of the rotation of the pickup coil leads to the direction of Electrical energy ( Alternating current ).
Explanation:
For a Generator to generate electricity, Electrons that is found in the rotating coil of the Generator will experience some sort of force that makes them to start moving in a direction that is perpendicular to the direction of the rotating/pickup coil found in the Generator.
The conversion of mechanical energy (Rotation of the pickup coil ) to electrical energy takes place in the Generator
The generator makes an alternating current because electrons move in opposite direction of the rotating coil
In other to generate a Direct current using a generator we have to replace the slip rings with commutator.
A book is sitting on a table. The book is
applying a 65 N down on the table.
How much force is the table exerting on the
book?
Answer:
65 Newtons
Explanation:
A book is kept on the table. The book is applying 65 N of force down on the table. So the table will also apply 65 N force to the book.
What is Force?According to physics, a force is an effect that has the power to change an object's motion. A force can cause a massed item to accelerate or modify its velocity. A push or a pull is a straightforward method to explain force. Considering that a force has both a magnitude and a direction, it is a vector quantity.
The pace at which an object's direction changes when it is traveling is referred to as its velocity, and is measured by a particular unit of time and from a particular point of view.
When the book is applying force on the table that is mg, and it is 65 N the table will also generate a normal reaction force which will be equal to the force applied by the book which is 65 N.
To get more information about Force :
https://brainly.com/question/13191643
#SPJ2
Which is one way to determine whether a reaction was a chemical reaction or a nuclear reaction?
Answer:
Check how much energy was released during the reaction or check for a change in total mass