A scientist tested a series of solutions to determine their pH, and recorded the results in this table.


Substance pH
A 9
B 12
C 11
D 14
According to this data, which solution would be most effective at neutralizing a strong acid?


Substance A

Substance B

Substance C

Substance D

Answer:

Approximately [tex]41.2\; {\rm ^{\circ} C}[/tex].

Explanation:

Let [tex]t\; {\rm ^{\circ} C}[/tex] be the final temperature of the water and the iron.

Temperature of the water would be increase by [tex](t - 38.00)\; {\rm ^{\circ} C}[/tex].

Temperature of the iron would be reduced by [tex](100.0 - t)\; {\rm ^{\circ} C}[/tex].

Let [tex]c[/tex] denote the specific heat of each material. Let [tex]m[/tex] denote the mass of the material. For a temperature change of [tex]\Delta t[/tex], the energy change involved would be:

[tex]Q = c\, m \, \Delta t[/tex].

The energy that the water need to absorb would be:

[tex]\begin{aligned}& Q(\text{water, absorbed}) \\ =\; & c(\text{water}) \, m(\text{water})\, \Delta t (\text{water}) \\ =\; & 4.181\; {\rm J \cdot g^{-1} \cdot K^{-1}} \times 50\; {\rm g} \times (t - 38.00)\; {\rm ^{\circ} C} \\ =\; & (209.05\, t - 7943.9)\; {\rm J} \end{aligned}[/tex].

The energy that the iron would need to release would be:

[tex]\begin{aligned}& Q(\text{iron, released}) \\ =\; & c(\text{iron}) \, m(\text{iron})\, \Delta t (\text{iron}) \\ =\; & 0.45\; {\rm J \cdot g^{-1} \cdot K^{-1}} \times 25.0\; {\rm g} \times (100.0 - t)\; {\rm ^{\circ} C} \\ =\; & (1125 - 11.25 \, t)\; {\rm J} \end{aligned}[/tex].

Since this calorimeter is insulated, the energy that the iron had released would be equal to the energy that the water had absorbed:

[tex]Q(\text{water, absorbed}) = Q(\text{iron, released})[/tex].

[tex]209.05\, t - 7943.9 = 1125 - 11.25\, t[/tex].

[tex]t \approx 41.2[/tex].

Thus, the final temperature of the water and the iron would be approximately [tex]41.2\; {\rm ^{\circ} C}[/tex].

The systematic Iupac name for the internal alkyne is : 4-octyne

When only one type of carboxylic acid is made the internal alkyne will be symmetric and the compounds can be 3-hexane or 4-octyne but given that one of the reactants is propyl iodide. Therefore

The Internal alkyne will have an Iupac name 4-octyne

Hence we can conclude that the systematic Iupac name for the internal alkyne is 4-octyne

Learn more about 4-octyne : https://brainly.com/question/24355559

Answer:

helium and hydrogen make up the first of these

the answer is period

Answer:

Destiny = 5 g/ml

Explanation:

The formula for density is d=

Knowing this, divide your mass by volume:

10 g / 2 ml = 5 g/ml

Final answer:

Destiny = 5 g/ml

Answer:

gamma decay

Explanation:

gamma rays have the highest frequency on the EM spectrum, which makes them the most dangerous.

Answer:  Antimony: Antimony is used to create firework glitter effects. Barium: Barium is used to create green colors in fireworks,

Explanation:

Answer:

Explanation:Antimony: Antimony is used to create firework glitter effects. Barium: Barium is used to create green colors in fireworks, 

The enthalpy of this reaction is -5315 KJ/mol.

The equation of the reaction is;

2C4H10(g) + 13O2(g) -----> 8CO2 (g) + 10H2O(g)

We know that the enthalpy of reaction can be obtained from the enthalpy of formation of the reactants and products as follows;

ΔHrxn = ΔHf(products) - ΔHf(reactants)

We have the following information from the question;

ΔHf C4H10 = - 125. 6 kJ/mol

ΔHf CO2 = - 393. 5 kJ/mol

ΔHf H2O = - 241. 82 kJ/mol

ΔHf O2 = 0 KJ/mol

Hence;

[(8 × (- 393. 5 )) + (10 × (-  241. 82))] - [2( - 125. 6))]

= -5315 KJ/mol

Learn more: https://brainly.com/question/13164491

The molecular formula of the ethylene glycol is C₂H₆O₂.

From the question given above, the following data were obtained:

Molecular formula = empirical × n = molar mass

[CH₃O]n = 62

[12 + (3×1) + 16]n = 62

31n = 62

Divide both side by 31

n = 62 / 31

n = 2

Molecular formula = [CH₃O]n

Molecular formula = [CH₃O]₂

Molecular formula = C₂H₆O₂

Learn more about empirical and molecular formula: https://brainly.com/question/25820990

Answer:

A

Explanation:

A GEL is a semisolid preparation that contains very small solid particles that are suspended in a liquid. A gel always contains an agent (e.g., agarose) that provides stiffness to the preparation.

A gel is a semisolid preparation that contains a gelling agent which provides stiffness to the preparation.

The gelling agent can be, for example, agarose (this gelling agent is used to prepare gels in electrophoresis).

In an agarose gel, agarose molecules are organized into three-dimensional (3D) structures similar to pores, which allow the passage of DNA fragments during electrophoresis.

Learn more about agarose gel here:

https://brainly.com/question/5661562

Answer:

[tex] \huge{5.632 \times {10}^{ - 19} \: J}[/tex]

Explanation:

The energy of the proton can be found by using the formula

where

E is the energy in J

f is the frequency in Hz

h is the Planck's constant which is

6.626 × 10-³⁴ Js

From the question we have

E = 6.626 × 10-³⁴ × 8.5 × 10¹⁴

We have the final answer as

[tex]5.632 \times {10}^{ - 19} \:J[/tex]

Hope this helps you

[tex] \sf = \frac{480}{8} = 60[/tex]

Answer:

The velocity of the car is 60 Km/hour to the east.

Hope you could get an idea from here.

Doubt clarification - use comment section.

Answer:

Because they do not naturally react with other elements

Explanation:

Since noble gases do have a fulfilled valence shell, they do not react with other elements because they're already stable by the themselves.

The mole ratio can be seen below and the volume of each precipitate is 60 mL.

A mole ratio refers to a conversion factor that compares the quantities of two chemicals in moles in a chemical laboratory experiment.

Mole ratio For 1:

Mole ratio For 2:

Mole ratio For 3:

Mole ratio For 4:

Mole ratio For 5:

Mole ratio For 6:

Mole ratio For 7:

Since the parameters from the left side of the diagram are not shown, we will assume that the volumes for each precipitate are the addition of both volumes in each column.

By doing so, we have:

1.

2.

3.

4.

5.

6.

7.

Learn more about mole ratio here:

https://brainly.com/question/19099163

Answer:

[tex] \huge{3.783 \times {10}^{ - 19} \: J}[/tex]

Explanation:

The energy of the wave can be found by using the formula

where

E is the energy

f is the frequency

h is the Planck's constant which is

6.626 × 10-³⁴ Js

From the question we have

E = 6.626 × 10-³⁴ × 5.71 × 10¹³

We have the final answer as

[tex]3.783 \times {10}^{ - 19} \: J[/tex]

Hope this helps you

Answer:

Thomson's plum pudding model of the atom had negatively-charged electrons embedded within a positively-charged "soup." Rutherford's gold foil experiment showed that the atom is mostly empty space with a tiny, dense, positively-charged nucleus. Based on these results, Rutherford proposed the nuclear model of the atom.

87 picograms are equivalent to [tex]8.7\times 10^{-11}[/tex] grams.

This is a unit problem, in which a derived unit must translated into a fundamental unit. A picogram is a equivalent to a trillionth of a gram, which is the fundamental SI mass unit. Mathematically speaking, we have the following equivalence:

[tex]1\,pg = 1\times 10^{-12}\,g[/tex]

Now we proceed to find the equivalent value for this case:

[tex]87\,pg[/tex]

[tex]87\times 10^{-12}\,g[/tex]

[tex]8.7\times 10^{-11}\,g[/tex]

87 picograms are equivalent to [tex]8.7\times 10^{-11}[/tex] grams.

To learn more on unit conversions, we kindly invite to check this verified question: https://brainly.com/question/13016491

awnser : 6.02×1023 molcules

Answer:

C

Explanation:

The most used codes for the creation of websites are CSS and HTML.

A code can be defined as the basic unit that composes a website. This implies that by using a code you can create a website from scratch and by the end of the process you should have a functional and complete website.

In website creation, the most common codes are  CSS and HTML.

HTML: This is the most common code used and also one of the easiest to understand and use.

CSS: This code is not as popular as HTML but it is still a very popular code used by many people creating websites.

Note: This question is incomplete because the options are not given; due to this, I answered it based on general knowledge.

Learn more about websites in: https://brainly.com/question/1631583?referrer=searchResults

CH=benzene

Why?

benzene is represented by the empirical formula CH, which indicates that a typical sample of the compound contains one atom of carbon (C) to one atom of hydrogen (H).

----(Is this what you meant???)

Taking into account the Newton's second law, the correct answer is option A. F = 9.68 N right

In first place, acceleration in a body occurs when a force acts on a body.

Newton's second law states that a force will change the speed of an object because the speed and/or direction will change. These changes in velocity are called acceleration.

So, Newton's second law defines the relationship between force and acceleration mathematically. This law says that the acceleration of an object is directly proportional to the sum of all the forces acting on it and inversely proportional to the mass of the object

Mathematically, Newton's second law is expressed as:

F= m×a

where:

In this case, you know:

Replacing in Newton's second law:

F= 2.2 kg× 4.4 m/s²

Solving:

F= 9.68 N

Finally, As the bowl of fruit accelerates to the right, the correct answer is option A. F = 9.68 N right

Learn more about the Newton's second law:

brainly.com/question/23845187?referrer=searchResults

brainly.com/question/13959891?referrer=searchResults

Answer:

3.56

Explanation: