a satellite is orbiting the earth a distance re above its surface. what is the acceleration due to gravity in this orbit?

The diameter of the smallest jovian planet is 3.96 times larger than the diameter of the largest terrestrial planet.

The jovian planets or also called giant gaseous planets are those that are far away in the solar system, which includes Jupiter, Saturn, Uranus, and Neptune, while terrestrial rocky planets include Mercury, Venus, the Earth planet and Mars.

Therefore, with this data, we can see that the jovian and terrestrial planets are different based on the composition of their surfaces and also due to the distance to the Sun.

Learn more about the jovian planets here:

https://brainly.com/question/8892207

#SPJ1

The particle model of light states that light is composed of discrete particles called photons.

What is photon?
The electromagnetic force is carried by a photon, an elementary particle which is a quantum of a electromagnetic field and includes electromagnetic radiation like light and radio waves. Due to their lack of mass, photons always travel at the speed of light in a vacuum, which is 299792458 m/s (or 186,282 mi/s). The photon is a member of the boson family. Photons exhibit wave-particle duality, with their behaviour exhibiting characteristics of both waves and particles. Like other subatomic particles, photons have been best explained by quantum mechanics. In the first two decades of the twentieth century, Albert Einstein developed the modern photon theory, building on the work of Max Planck.

The varying wavelengths of visible light emitted by stars are evidence of the particle nature of light, since different temperatures of stars result in different amounts of energy being released in the form of photons, which each have a different frequency and energy level. This phenomenon supports the particle model of light because it demonstrates that light is composed of distinct particles with different energies.

To learn more about photon
https://brainly.com/question/1578259
#SPJ4

The minimum speed of the car is 11.1634 mph and the radius of the yaw mark is 11.2 ft.

Yaw marks are always curved. They are, initiated by a steering input. They're what's left from a tire that is still rolling but is simultaneously sliding laterally.

The radius of the yaw mark to the nearest tenth of a foot = r

The minimum speed = s

Length of the chord = c = 31 ft

Middle ordinate = m = 3 ft

Drag factor = f = 1.02

The formula for determining radius from a chord and middle ordinate is =

= r² = (c² / 8 x m) + (m / 2)

=  r² = (31² / 8 x 3) + (3 / 2)

= r² = 41.541

= r = 11.2 ft

(b) Now minimum speed = s

= s = √(15 X f X r)

= s = √ (15 X 1.02 X 11.2)

= s = 11.1634 mph

To know more about Yaw Mark:

https://brainly.com/question/27651039

#SPJ4

The worn idler arm is the component that is most likely at fault.

What occurs when a wheel hits a dip or home and moves downward?

When you hit any bump or dip in a road, your vehicle's suspension and springs move so the tire can stay in contact with the road and absorb the energy. The shock absorbers dampen the movement of the springs by converting the spring's kinetic energy into thermal (heat) energy.

What are the symptoms of a bad idler arm?

What are the warning signs of a bad idler arm? If you notice your steering wheel feels loose or has extra play before the tires respond, this may be a sign of an issue with your idler arm or pitman's arm. If these arms fail completely, you will lose all steering in your vehicle.

Can a worn idler arms cause play?

A steering wheel with too much play that shimmies, shakes, or vibrates too loosely can be a symptom of a bad idler arm. Poor steering likely means the ball joints are worn.

How important is an idler arm?

Idler's arms are particularly important for two reasons. First, as mentioned, the idler arm supports the right end of the track rod. Without it, the track rod would not hold the right wheel in place or turn it effectively, if at all. Second, the idler arm maintains proper toe angle.

Thus, a worn idler arm is a correct answer.

To know more about the idler arm :

https://brainly.com/question/29655894

#SPJ4

The maximum angle with respect to the normal that this light can strike the emerald/air interface such that the light wave exits into the air is: 39.34.

Total Internal Reflection

[tex]M_{1}[/tex] sin(∅[tex]_{c}[/tex]) = M[tex]_{2}[/tex] Sin(90)

sin(∅[tex]_{c}[/tex])= M[tex]{2}[/tex]/M[tex]_{1}[/tex] = 1/1.57 = 0.636

∅[tex]_{c}[/tex]= 39.49

∅ = 39.34

v = c/λ

c = 1000/5.56e - 6 = 1.798 × [tex]10^{8}[/tex] m/s

v = 1.798 × [tex]10^{8}[/tex]/400e-9 = 4.496 × [tex]10^{14}[/tex] Hz

What is refraction index?

In optics, the refractive index (or refractive index) of an optical medium is a dimensionless number that indicates the ability of the medium to diffract light.

The index of refraction determines how much a light path bends or refracts as it enters a material. This is described by Snell's law of refraction n1 sin θ1 = n2 sin θ2. where θ1 and θ2 are the angles of incidence and refraction, respectively, for a ray that crosses the interface between two media with indices of refraction n1 and n2. The index of refraction also determines the amount of light reflected upon reaching an interface, the critical angle for total internal reflection, its intensity (Fresnel equation), and Brewster's angle.

To know more about refraction index, check out:

https://brainly.com/question/14760207

#SPJ4

Answer:

Below

Explanation:

AVERAGE velocity = ( 28.8 - 0 ) / 2 = 14.4 m/s

74 m / 14.4 m/s = 5.14 s

The total distance is 0.92 m

In physics, amplitude refers to the greatest displacement or distance that a point on a vibrating body or wave can move relative to its equilibrium position. It is equivalent to the vibration path's half-length.

A particle can move up to 0.23 meters from its resting position if it experiences simple harmonic motion with an amplitude of 0.23 meters.

It moved twice as far from its beginning place to its original position during one period, then returned after travelling a further twice as far distance.

Given ,

A total distance of

2*amplitude + 2*amplitude

= 2*0.23 + 2*0.23

= 0.42 + 0.46

= 0.92 meters

Therefore the total distance is 0.92 m

To learn more about total distance refer to :

https://brainly.com/question/25778905

#SPJ4

The 85% confidence interval estimate of the true population proportion of disks which are defective is 0.100 +/- 0.010

= (0.095, 0.110),Lower: 0.095 ,Upper: 0.110

Confidence intervals are a set of values with a known probability that the value of a parameter will fall within them.

The confidence interval of statistical data can be written as.

p+/-z√(p(1-p)/n)

We are given that,

Proportion of disks that are not defective = p' = 1283/1475 = 0.950

Proportion of disks that are defective = p = 1 - p' = 1 - 0.950 = 0.05

Thus , p = 0.05

Number of samples= n = 1350

Confidence interval = 85%

z value(at 85% confidence) = 1.28

Substituting the values we have;

0.100 +/- 1.28√(0.100(1-0.05)/1350)

0.100 +/- 1.28(0.00703703)

0.100 +/- 0.0090073984

0.100 +/- 0.010

= (0.095, 0.110)

According to the 85% confidence interval, the actual population percentage of defective discs is 0.100 +/- 0.010

Therefore, interval = (0.095, 0.110), Lower: 0.095, Upper: 0.110 can be used to describe the population portion.

To know more about confidence interval

https://brainly.com/question/23208777

#SPJ4

The tension in the rope at the lower part of the swing is 388.2 N.

The tension in the rope at the lower part of the swing is calculated by applying the following formula.

T = W + Fc

where;

T = mg + mac

T = m (g + ac)

T = m (g + v²/r)

where;

The magnitude of the tension in the ropes is calculated as;

T = 30.8 (9.8  +  4.2²/6.29)

T = 388.2 N

Learn more about tension in ropes here: https://brainly.com/question/19204287

#SPJ1

Generator component within an absorption refrigeration system requires heat transfer from a high temperature source.

The evaporator "buckets" or collects heat from the chilled area. Low pressure causes the "bucket" to undergo a state shift (latent heat transfer) as it takes in heat. The "bucket" of low pressure and heat is then transported to the compressor by the evaporator. The component of the refrigeration system that actually cools things down is called the evaporator. The evaporator is situated in the region to be cooled because its purpose is to absorb heat into the refrigeration system (from where you don't want it to).

Learn more about system here-

https://brainly.com/question/16579482

#SPJ4

The change in temperature of the wire is 60.2°C.

Learn more about change in the temperature refer to :

https://brainly.com/question/25677592

#SPJ1

The magnetic field at a distance x from the center of the axis of a circular loop of a radius r carrying current is µI/2R

Think about a loop that is R in diameter and I in current. The axis of the loop OX is located in the plane of the paper, while the Y-Z plane of the coil is perpendicular to the plane of the paper. Consider breaking up the circular loop into a large number of current elements, I*dl

Then, the Magnetic field due to the whole current loop will be:

B = µI[tex]R^{2}[/tex]/2[tex]2(x^{2} +R^{2} )^{3/2}[/tex]

When x =0, we get the correct results for the field at the center of a current loop.

B = µI/2R

When x exceeds R by a significant amount, the magnetic field diminishes as [tex]1/x^{3}[/tex]

To read more about magnetic fields, visit https://brainly.com/question/23096032

#SPJ4

Ride's rotation that will keep the student pinned to the wall once the floor drops is  3.97 sec.

rotation is a type of trasfermation that takes each point in a figure and rotates its a certain number.

Mass of student = 50 kg

Coefficient of static friction  \mu = 0.8 μ=0.8

Ride diameter  d = 10 m d=10m

Ride radius  r = \frac{d}{2} = 5 m r= 2d

=5m

Acceleration due to gravity  g = 10 m/s^2 g=10m/s

2

Maximum period of ride's rotation =

Formula:   \text{ Maximum period } = \500{\text{ Circumference }}{\10m/s{ Velocity }}  Maximum period =

Velocity

Circumference                

Step 1: Calculating the static frictional force and normal force

This frictional force will be equal to the student's weight to

 find out what minimum static frictional force is required

Hence, maximum period of ride's rotation  P = 3.97 P=3.97 sec

to know more about rotation click-

https://brainly.com/question/28134390

#SPJ1

The factor through which the constant would have to change is given as 0.00412

The moment of inertia is expressed as I = mr²

mass and volume has the relationship that is written as:

m = pV

m α V

mass is directly proportional to volume

m∝r³

m ∝ (1/3)³ = 1 / 27

the moment of inertia can be decreased by: 1 / 27 * (1 / 3)²

= 1 / 243

a. The angular frequency is gotten by

√1 / I

[tex]\sqrt{\frac{1}{1/243} }[/tex]

= 243

The factor through which the torsion constant would have to be reduced is given as 1 / 243

= 0.00412

There was a decrease of 0.00412

Read more on oscillation frequency here: https://brainly.com/question/29583636

#SPJ1

Your boss at the Cut-Rate Cuckoo Clock Company asks you whatwould happen to the frequency of the angular SHM of the balancewheel if it had the same density and the same coil spring (thus thesame torsion constant), but all the balance wheel dimensions weremade one-third as great to save material.

By what factor would the torsion constant need to be changedto make the smaller balance wheel oscillate at the originalfrequency?

Mathematically, the answer to the following question's a part is: [tex]C_{v} = \frac{Rs}{2}[/tex] and b part is: s=17.

a) Using the equipartition theorem,

U = [tex]\frac{1}{2} k_{b} T[/tex]

= [tex]\frac{1}{2} n_{R} T[/tex]

Degree of freedom for 's'

= [tex]\frac{1}{2} sn R T[/tex]

Then, molar specific heat [tex]C_{v} = \frac{1}{n} \frac{dU}{dT}[/tex]

Mentioning it in terms of R and s;

[tex]C_{v} = \frac{1}{n} \frac{dU}{dT} (\frac{1}{2} sn RT)[/tex]

[tex]C_{v} = \frac{Rs}{2}[/tex]

b) As per question,

[tex]C_{v}[/tex] = 70.6 J/mol.K and R = 8.314 J/mol.K

Using the formula, [tex]C_{v} = \frac{Rs}{2}[/tex]

70.6 J/mol.K = [tex]\frac{(8.314 J/mol.K) X s}{2}[/tex]

taking 2 on the left side by moving it from the division

70.6 J/mol.K x 2 = 8.314 J/mol.K x s

= [tex]\frac{70.6 J/mol.K X 2}{8.314 J/mol.K}[/tex]

s = 16.983 then we round it off to the nearest figure

We get, s = 17

Each degree of freedom that only appears quadratically in the total energy has an average energy of 1/2 kBT in thermal equilibrium, which increases the system's heat capacity by 1/2 kB, according to the equipartition theorem, also known as the law of equipartition, the equipartition of energy, or simply equipartition. The classical physics presumption that this concept holds true in all situation is refuted by the quantum theory.

To learn more about equipartition theorem: https://brainly.com/question/13040781

#SPJ4

It will take 24 days for the radiation level of barium-131 to drop to 1/4 of its original level.

We know that radioactive reactions are 1st order reactions.

Given half life of Barium-131 is approximately 12 days.

So to drop to 1/4 of it's original level it will take more 12 days i.e. one more half life.

Total days are : 12+12=24 days

So it will take 24 days for the radiation level of barium-131 to drop to 1/4 of its original level.

To know more about radioactivity visit:

https://brainly.com/question/9674462

#SPJ4

To calculate the maximum speed of the Bugatti Veyron, we can use the equation $F_d = \frac{1}{2} \rho v^2 c A$,

which relates the drag force $F_d$ acting on an object to the density of the fluid $\rho$, the speed $v$ of the object, the drag coefficient $c$, and the cross-sectional area $A$ of the object.

In this case, we are given the mass of the car, the drag coefficient, and the force that the engine can impart on the road, so we can solve for the maximum speed.

First, we need to convert the mass of the car to its weight, which is the force of gravity acting on the car. The weight of the car is given by the equation $W = mg$, where $m$ is the mass of the car and $g$ is the acceleration due to gravity.

We can convert the mass of the car from kilograms to newtons by multiplying it by $g$, which is approximately 9.8 m/s$^2$. This gives us a weight of $W = 1834 \text{ kg} \times 9.8 \text{ m/s}^2 = 17983.2 \text{ N}$.

Next, we need to calculate the cross-sectional area of the car. Since we are given the shape of the car and the drag coefficient, we can assume that the car has a streamlined shape with a length $L$ that is much greater than its width or height.

In this case, the cross-sectional area of the car is approximately equal to its width $w$ times its height $h$, or $A \approx wh$. If we assume that the width of the car is $w = 1.8$ meters and the height is $h = 1.2$ meters, then the cross-sectional area is $A \approx 2.16 \text{ m}^2$.

Now that we have all of the required information, we can solve for the maximum speed of the car. The maximum speed is achieved when the drag force acting on the car is equal to the force that the engine can impart on the road. This means that the maximum speed $v_\text{max}$ is given by the equation

$$F_d = \frac{1}{2} \rho v_\text{max}^2 c A = F_\text{engine}$$

where $\rho$ is the density of the air, $c$ is the drag coefficient, $A$ is the cross-sectional area of the car, and $F_\text{engine}$ is the maximum force that the engine can impart on the road.

We are given that the drag coefficient is 0.342 kg/m and the maximum force that the engine can impart on the road is 4522 N. The density of the air is approximately 1.225 kg/m$^3$ at sea level. Plugging these values into the equation, we get

$$\frac{1}{2} \times 1.225 \text{ kg/m}^3 \times v_\text{max}^2 \times 0.342 \text{ kg/m} \times 2.16 \text{ m}^2 = 4522 \text{ N}$$

Solving for the maximum speed, we get $v_\text{max} \approx 242.5$ m/s. This is the maximum speed of the Bugatti Veyron if we neglect all other sources of friction and assume that the car has a streamlined.

Learn more about maximum speed:
https://brainly.com/question/29573654

#SPJ4

The tree will fall along quarter circular path by virtue of centre of mass.

To know more center of mass -

https://brainly.com/question/8662931

#SPJ4

Alright, the answer is A.

Endothermic means that the source requires absorption of heat. Exothermic means that the source is accompanied by the release of heat.
B and D are incorrect, as they mean the opposite of the term associated.
So between A and C, when you lose heat in water vapor, the water VAPOR turns into regular water. Therefore:

A is correct.
(Logically, anyways.)
Let me know if this helped.

The acceleration of both the box will indeed be 0.8 m/s² when the friction factor is 0.12.

Acceleration is the pace at which the speed and direction of a moving object change over time. Something is said to be accelerating when it commences to move quickly or slowly. Even if the voltage is constant, transportation on a circle accelerates because the angle is always shifting.

According to the given statement we have frictional force f = µ •N

where N = normal force = mg

the given Sliding friction µ= 0.12

therefore f = 0.12 × 50 × 10 = 60 N

hence net friction = applied friction - frictional force = 100 - 60 = 40 N

also we know that Force F= ma

therefore we have acceleration formula ,

acceleration = force/mass = 40 / 50 = 0.8 m/ s²

hence the acceleration of the box is 0.8 m/s².

To know more about Acceleration visit :

https://brainly.com/question/12550364

#SPJ4

The kinetic energy of the rock right before it impacts the ground is 2940J.

Solution:

[tex]E_{P} = m_{gh}[/tex]

10 KG * 9.8m/s² * 30 m

[tex]E_{p}[/tex] = 2940 J

A falling ball has kinetic energy due to its motion. Therefore, the potential energy stored in the ball in its elevated position is converted into kinetic energy when the ball falls. When an object is in free fall, its potential energy is converted into kinetic energy.

When an object hits the ground its kinetic energy is converted into heat and sound energy. When an object falls, its potential energy decreases, and its kinetic energy increases. A decrease in potential energy is exactly the same as an increase in kinetic energy.

Learn more about Kinetic energy here:-https://brainly.com/question/25959744

#SPJ4

Beginning velocity is required for a projectile to be launched from the ground up to the Washington Monument's 555-feet summit.

Casey was convinced to make the height of the tower 10 times the width of the base, which meant that the Washington Monument's ideal height was 555 feet rather than the 600 feet that Mills had originally envisioned.

When compared to a memorial, why is the Washington Monument a "monument"? A memorial honors or pays tribute to a person who has passed away. A monument has a crucial distinction: it is created to honor or remember a living person.

To know more about Washington Monument visit;

https://brainly.com/question/10466729?

#SPJ4

Loftiest to smallest temperature

Mercury

Earth

Mars

Jupiter

Neptune

What's the average face temperature?

Planetary face temperatures range from over 400 °C on Mercury and Venus to below-200 °C on distant globes. The factors that determine temperature are the complex balance of heat entered and lost.

Thus, for these five globes, temperature correlates with distance from the Sun. The near to the sun, the hotter the earth. Note, still, that this isn't always the case, as the earth's temperature also depends on its reflectance and the strength of the greenhouse effect( if present). For illustration, although Venus is nearly doubly as far from the Sun, the average temperature on Venus is advanced than on Mercury due to the greenhouse effect.

To know more about temperature visit:

brainly.com/question/11224776

#SPJ4

The maximum speed with which the car can round the curve is 12.1 m/s

The force preventing sliding against one another of solid surfaces, fluid layers, and material components is known as friction.

The force produced between surfaces that slide against one another is known as the frictional force.  Because frictional force develops when two surfaces come into contact with one another, it is referred to be a contact force. Walking on the road is an illustration of frictional force.

According to the given information

radius, [tex]$r=30 \mathrm{~m}$[/tex]

coefficient of friction, [tex]$\mu_k=0.50$[/tex]

Here friction : force will balance centripetal force.

[tex]$\begin{aligned} &\left(F_k=\text { Friction force })\right. \\ & F_k=\frac{m v^2}{r} \\ & \mu m_g=\frac{m v^2}{r} \\ & \mu g=\frac{v^2}{r} \\ & v^2=r \mu g=30 \times 0.5 \times 9.8 \\ & v=12.1 \mathrm{~m} / \mathrm{s}\end{aligned}$[/tex]

The maximum speed with which the car can round the curve is 12.1 m/s

To know more about Frictional force

https://brainly.com/question/1714663

#SPJ4

The Power provided by the student's biceps is 7.5 J/s.

Given,

Mass = 50kg

Distance = 0.3 meters

Time = 2 seconds

W = fd

P = W/(t₂ - t₁)

To find work

W = (50kg)(0.3m)

W = 15J

To find power.

P = 15J / 2 - 0

P = 15J / 2

P = 7.5 J/s

Therefor the power is 7.5J/s

To learn more about power refer to :

https://brainly.com/question/1634438

#SPJ4

Answer:

Force = 93 N

Explanation:

Given:

m₁ = 1500 kg

R₁ = 0.15 m

R₂ = 0.012 m

g = 9.8 m/s²

_____________

F₂ - ?

1)

Piston area:

S₁ = π·R₁² = 3.14·0.15² ≈ 71·10⁻³ m²

S₂ = π·R₂² = 3.14·0.012² ≈ 0.45·10⁻³ m²

2)

Force:

F₁ = m₁·g = 1500·9.8 = 14 700 N

F₂ = F₁· (S₂ / S₁)

F₂ = 14 700· (0.45·10⁻³ / (71·10⁻³) ≈ 93 N

A capacitor, because it has the greatest reactance at frequency f = 0 Hz.

A capacitor is a device that stores electrical energy in an electric field through the accumulation of electrical charges on two nearby surfaces insulated from each other. It has two terminals and is a passive electrical component. Charges flow through the capacitor when it is supplied with electricity, but this flow is blocked by the insulation between the metal plates. Since the capacitor's electrode plates are separated by an insulator (air or dielectric), no direct current can flow unless the insulator decays. In other words, a capacitor blocks direct current. When we connect a capacitor across an AC power source, it starts charging and discharging continuously due to the continuous change in the supply voltage. Capacitors do not store charge. Capacitors actually store a charge imbalance.

To learn more about capacitors click here https://brainly.com/question/17176550

#SPJ4

When wind speeds up as it blows over the top of a hill, atmospheric pressure there increases.

To know more about pressure visit:

https://brainly.com/question/14883945

#SPJ4

The longest wavelength at which a metal will emit an electron is 520 nm.

Wave length is determined by the wavelength, which is also the separation between two wave crests and troughs. The amount of vibrations that pass through a certain region in a second is referred to as "frequency," and it is expressed in cycles per second (Hz) (Hertz). The link between wavelength and frequency is discussed in this article.

The distance between identical points (adjacent crests) in adjacent cycles determines how far a waveform signal has traveled in space or over a wire. In wireless systems, this length is frequently specified in meters (m), centimeters (cm), or millimeters (mm) (mm).

To know more about Wavelength visit:

brainly.com/question/13533093

#SPJ4

The examples that were originally classified as a nebula are Orion nebula, Hercules globular star cluster, Andromeda galaxy, and Ring nebula; option A, B, C, and D.

A nebula is a giant cloud of dust and gas that is found in space. More than one nebula is collectively called nebulae. The gases present in a nebla are usually hydrogen and helium.

Some nebulae are made from the gas and dust that are released by the explosion of a dying star, for example in a supernova.

Some other nebulae are the sites for the formation of new stars.

The four types of nebulae are:

Learn more about nebula at: https://brainly.com/question/1162533
#SPJ1