what does the atomic mass number of each atom represent.
The atomic mass number tells us the number of neutrons and protons in the nucleus of an atom.
Benzoic acid, C6H5COOH, is another derivative of benzene. The pH of an aqueous solution of benzoic acid at 298 K is 2.95. Determine the concentration of hydroxide ions in the solution,
Answer:
[OH⁻] = 8.91x10⁻¹²M
Explanation:
In aqueous solutions, the [OH] and [H⁺] are associated in the equation of hydrolisis of water:
1x10⁻¹⁴ = [OH⁻] [H⁺]
With pH, we can solve for [H⁺] and obtain, the [OH⁻] using this equation:
pH = -log [H⁺]
[H⁺]= 10^-pH
[H⁺] = 1.122x10⁻³M
1x10⁻¹⁴ = [OH⁻] [1.122x10⁻³M]
[OH⁻] = 8.91x10⁻¹²MDescribe in your own words how the earth's layers were formed.
The layers of the earth were formed due to the sediments that significantly flattens out beside the center of the earth. After a long duration, a new layer is spread over the older layer, and so on.
What are the different layers of the earth?The different layers of the earth are as follows:
The Inner Core: This is the first layer from the center of the earth. The Outer Core: It is found after the inner core. The Mantle: It is the middle layer of the earth. The Crust: It is the outermost layer of the earth.The above-mentioned layers of the earth were formed with the impact of the building blocks of the earth that are remarkably known as Planetesimals, collided, and collapsed.
During that time, the hardest elements like nickel, iron, etc. constitute the core while the lighter elements like carbon, oxygen, silicon, etc. play an essential role in the formation of crust and mantle.
Therefore, the layers of the earth were formed due to the sediments that significantly flattens out beside the center of the earth.
To learn more about The layers of the earth, refer to the link:
https://brainly.com/question/10430823
#SPJ2
Which chemical equation is balanced?
A. CaO2 + HCl → CaCl2 + H20
B. CO2 + H2O + H2CO2
C. K+ H2O → K20 + H2
D. MgO + 2HCI – MgCl2 + H20
10 points if you answer fast
D. MgO + 2HCI – MgCl2 + H20
Further explanationThe chemical equation is said to be balanced if the number of atoms in the reactants is equal to the number of atoms in the product
A. CaO2 + HCl → CaCl2 + H20
atoms O, Cl and H are not the same
B. CO2 + H2O + H2CO2
atoms O are not the same
C. K+ H2O → K20 + H2
atoms K are not the same
D. MgO + 2HCI – MgCl2 + H20
Mg, left = 1, right=1
O, left=1, right=1
H, left=2, right=2
Cl, left=2, right=2
Chemical equation is balanced
Answer:
B. CO2 + H2O + H2CO2
Explanation:
Why are flowers brightly colored?
Answer: In order to help the plants reproduce, flowers that are bright in color are meant to attract birds, bees and other insects. In the genetics of a flower, bright or dull colors are set in
Explanation:
What igneous rock is non-vesicular and glassy in texture and has a mafic composition?
Answer:
igneous rock
Explanation:
I WILLL GIVE YOU BRAINLYESTTT PLEASE HELPPPP
Answer:
10.99s
Explanation:
Given parameters:
Speed of the fly = 9.1m/s
Distance flown = 100m
Unknown:
Time taken to fly this distance = ?
Solution:
Speed is distance divided by the time;
Mathematically;
Speed = [tex]\frac{distance}{time}[/tex]
Time = [tex]\frac{distance}{speed }[/tex]
Insert the parameters and solve;
Time = [tex]\frac{100}{9.1}[/tex] = 10.99s
Geologic Time Scale
Time Period Duration (Millions of Years Ago)
Cenozoic 66-0
Mesozoic 252-66
Paleozoic 541-252
According to the scale, what time period are we in today?
a
Cenozoic
b
Mesozoic
c
Paleozoic
d
None of these
Which is more electrically negative? 1)C 2)P or 3)S
GUYS PLEASE HELP!!! :((
Answer:
3 sulphur is more electrically –
What is the volume of a 25 g object with a density of 9.1 g/mL? please help me
Answer:
The answer is 2.75 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question we have
[tex]volume = \frac{25}{9.1} \\ = 2.747252...[/tex]
We have the final answer as
2.75 mLHope this helps you
What causes rain to precipitate from clouds?
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation: Have a blessed day!
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation:hope this helps u
3.) All matter has both physical and chemical properties. A physical property is one that does not change the chemical nature of matter. Which of these choices is a physical property?
A.) height
B.) flammability
C.) ability to rust
D.) reaction with water
Answer:
D
Explanation:
It would be D because you are observing the reaction and don’t change anything
12.
Contrast and compare:
a) ionic and covalent bonding
Answer:
Ionic bonds - an intramolecular force exist in a nonmetal and metal compounds such as NaCl. The Na donate 1 electon to Cl to complete its octet rule.
Covalent bond - an intramolecular force exist in a nonmetal and nonmetal compounds such as bonds O2, Cl2, CO2, sugar, proteins and most of organic compounds and biomolecules by sharing electrons to bond.
There are two types of covalent bonds: polar and nonpolar. Polar bond is a bond between two different nonmetal atoms of different electronegativities. While nonpolar bond is a bond between the same atom or two differenct atoms of the same electronegativities (if there is). Their electronegativities pull will cancel so that their overall polarity is zero.
Can someone help? Ill give brainliest!
Directions: count each side of the reaction. Circle yes or no if it follows the law of conservation of mass
Answer:
Yes, it becomes 2 of H20 which is water
How did the substance oxygen change the world??
Answer: The atmosphere of Earth wasn't always full of oxygen. ... An accidental mutation would some day change the world forever as these organisms would become able to feed off of the sunlight around them, and produce oxygen in a process known as photosynthesis. This oxygen, which none of these organisms could use, was toxic.
Under a certain set of conditions, the percent yield of a reaction that produces carbon dioxide is 75.0%. What mass in grams of CO2 will actually be recovered if the theoretical yield is 26.7 grams?
Answer:
Actual yield = 20.03g
Explanation:
[tex]% yield = 100.\frac{actual yield}{theoretical yield}[/tex]% [tex]yield[/tex] = [tex]100. \frac{actual \ yield}{theoretical \ yield}[/tex]
Actual yield = % yield.(theoretical yield) / 100
Actual yield = 75.26.7/100
Actual yield = 20.025
Answer: I got 20.025 and then I rounded it to 20.0
Explanation:
How is the pH of an acidic substance raised?
1) Dilute it.
2) freeze it.
3) Stir it.
4) Concentrate it.
Answer: 4) Concentrate it
Explanation:
The table gives the solubility of each substance in 100
g water at 20°C. Use the drop-down menus to rate the solubility of each substance from greatest (1) to least
(4).
Calcium chloride
Calcium bromide
Calcium carbonate
Calcium bicarbonate
Answer:
2 1 4 3
Explanation:
Polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore the order of solubility is calcium bromide> calcium chloride>calcium bicarbonate>calcium carbonate.
What is solubility?Solubility shows the extent of solubility of a solute in solvent to make a solution. Solute is substances that is present in small amount. solvent is a substance that is present in large amount. Its SI unit is gram per liter or g/L.
Bond strength affect the solubility of a solute in solvent. weaker the bond strength is, more the solubility is. The weaker bond can be easily broken by water molecule
Calcium bromide is more soluble than calcium chloride as the bond strength in calcium bromide is weaker than calcium chloride. Calcium bicarbonate is more soluble than calcium carbonate.
Therefore the order of solubility is calcium bromide> calcium chloride>calcium bicarbonate>calcium carbonate.
To know more about solubility, here:
https://brainly.com/question/16191271
#SPJ2
How can air quality be fine on one day and hazardous on the next? What
are some things that can cause a rapid change in air quality? *
Answer:
Air Current
Explanation:
Say I am in California and there is a massive fire next to me but not close enough to me to really see the fire and the next day I see no fire but theres a ton of ash in the sky, this can be due to the wind current taking the smoke from the fire into my direction and that smoke falling in my area. So basically a wind current can take the smoke from a fire into another destination and cause a rapid change in air quality in a day.
A 23.7 g piece of iron at 54.9°C is cooled and releases 338 J of heat. The specific heat of iron is 0.450 J/g°C.
Answer:
The heat capacity and the specific heat are related by C=cm or c=C/m. The mass m, specific heat c, change in temperature ΔT, and heat added (or subtracted) Q are related by the equation: Q=mcΔT. Values of specific heat are dependent on the properties and phase of a given substance.
Explanation:
Answer:
23.2 degrees c
Explanation:
How do I graph these question
a. Explain why bicycle tires seem higher in the summer than in winter.
b. Explain why a can of soda pop explodes if left in the hot sun.
c. A rigid container filled with a gas is placed in ice (ex. nalgene bottle). What will happen to the pressure of the gas? What do you think will happen to the volume?
d. An infected tooth forms an abscess* that fills with gas. The abscess puts pressure on the nerve of the tooth, causing a toothache. While waiting to see a dentist, the person with the toothache tried to relieve the pain by treating the infected area with moist heat. Will this treatment help? Why or why not?
The sum of the protons and neutrons in an atom equals the?
nucleus number
atomic number
atomic mass
mass number
Answer:
mass number
Explanation:
The sum of the protons and neutrons in an atom equals the mass number of such an atom.
Mass number is the mass of an atom. The mass of an atom is concentrated in the nucleusThe particles in the nucleus are the protons and neutrons.So;
Mass number = number of protons + number of neutrons.
A bus travels a distance 150km
in 5 hours where as another bus travel 200km in
6 hours which bus travel fast
Answer: The bus traveling 200km in 6 hours is traveling the fastest.
Explanation:
Bus 1
150km/5hrs
Simplify -> 30km/hr
Bus 2
200km/6hrs
Simplify -> About 33.333km/hr
If all objects masses are the same, then the object with the least ___ is the densest?
Possible Answers:
A: Mass
B: Volume
C: Weight
D: Density
Answer:
its weight
Explanation:
mass is how much space it takes up the volume stays the same density is what happens after so its weight
Air is trapped in a cylinder fitted with a piston that occupies 150.5 mL at 1.12 atm pressure. What is the new volume when the piston is depressed, increasing the pressure by 15%?
Answer:
New volume V2 = 120.4 ml
Explanation:
Given:
Pressure P1 = 1.12 atm
New pressure P2 = 1.12[1+0.25] = 1.4 atm
Old volume V1 = 150.5 ml
Find:
New volume V2
Computation:
P1V1 = P2V2
(1.12)(150.5) = (1.4)(V2)
V2 = 120.4 ml
New volume V2 = 120.4 ml
helppppp. which of the following statements regarding physical and chemical changes is true? a. both physical and chemical changes alter the atomic structure of a substance. b. neither physical not chemical changes alter the atomic structure of a substance. c. physical changes alter the atomic structure of a substance, while chemical changes do not. d. chemical alter the atomic structure of a substance, while physical changes do not. huryyyy
Answer:
B
Explanation:
I did it
Neither physical not chemical changes alter the atomic structure of a substance. The correct option is b.
What are chemical changes?When one chemical substance is transformed into one or more different substances, such as when iron becomes rust, a chemical change occurs.
Chemical changes occur as a result of chemical reactions, and the resulting substances have different properties due to the different arrangements of their atoms and molecules.
Physical changes affect a chemical substance's form but not its chemical composition.
Physical changes can be used to separate mixtures into their component compounds, but not to separate compounds into chemical elements or simpler compounds.
Physical or chemical changes have no effect on a substance's atomic structure.
Thus, the correct option is b.
For more details regarding chemical changes, visit:
https://brainly.com/question/23693316
#SPJ6
periodic table of elements
Vertical Column is a group
Horizontal is Period
Aliki earth metals is a group
Lithium- Neon is both
Based on electrons are both
Number of electron shells is both
A very hot cube of copper metal (32.5 g) is submerged into 105.3 g of water at 15.4 0C and it reach a thermal equilibrium of 17.3 0 Calculate the initial temperature of copper (Cs = 0.385 J/g 0C for copper, and 4.18 J/g 0C for water).
Answer:
The initial temperature of the metal is 84.149 °C.
Explanation:
The heat lost by the metal will be equivalent to the heat gain by the water.
- (msΔT)metal = (msΔT)water
-32.5 grams × 0.365 J/g°C × ΔT = 105.3 grams × 4.18 J/g °C × (17.3 -15.4)°C
-ΔT = 836.29/12.51 °C
-ΔT = 66.89 °C
-(T final - T initial) = 66.89 °C
T initial = 66.89 °C + T final
T initial = 66.89 °C + 17.3 °C
T initial = 84.149 °C.
(Need Help ASAP) 23.5 grams of iron(III) oxide (Fe2O3) are reacted with excess carbon. What is the theoretical yield of iron metal?
2 Fe2O3 + 3 C --> 4 Fe + 3 CO2
The theoretical yield of iron metal : 16.418 g
Further explanationA reaction coefficient is a number in the chemical formula of a substance involved in the reaction equation. The reaction coefficient is useful for equalizing reagents and products.
Reaction
2 Fe₂O₃ + 3 C ⇒ 4 Fe + 3 CO₂
mol Fe₂O₃ (MW=159,69 g/mol) :
[tex]\tt \dfrac{23.5}{159.69}=0.147[/tex]
mol Fe₂O₃ : mol Fe = 2 : 4
mol Fe :
[tex]\tt \dfrac{4}{2}\times 0.147=0.294[/tex]
mass Fe(the theoretical yield) :
[tex]\tt 0.294\times 55.845~g/mol=16.418~g[/tex]
Answer:
The correct answer with signfigs is 16.4 for the first part
The second box is 88.4
Explanation:
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY!
Is the following picture an example of a chemical change or a physical change?
A chemical change, because the atoms are rearranging to form new molecules.
A physical change, because the molecules are staying the same.
A chemical change, because the molecules are staying the same.
A physical change, because the atoms are rearranging to form new molecules.
Answer:
It would be a physical change, because the atoms are rerranging to form new molecules!
Explanation: