The RIP route is not used because OSPF has a lower administrative distance.
Why is the rip route to this network not used in the routing table?The administrative distance of a routing protocol is a measure of its trustworthiness, where a lower number indicates a more reliable protocol. The administrative distance of OSPF is lower than the administrative distance of RIP, so when a network is advertised by both RIP and OSPF, the OSPF route is preferred, and the RIP route is not used in the routing table. This is why the network appears in the routing table flagged as an OSPF route.
Learn more about Network: https://brainly.com/question/8118353
#SPJ4
Taking the right amount of ________ to design your game can be the difference between success and failure.
A.
advice
B.
time
C.
financing
D.
suggestions
B. time ..................
it makes more sense
There are many parameters that could be used to describe disk performance; among them are:
number of bits per track disk capacity (in bits) number of disk surfaces
rotational speed rotational latency transfer rate
tracks per surface sectors per track blocks per track
sectors per block seek time speed of disk arm
block-read time number of blocks Some of these parameters are independent, and others are (approximately) linearly related. That is, doubling one doubles the other. Decide which of these parameters are linearly related. Then, select from the list below, the relationship that is true, to within a close approximation.
Note: none of the statements may be true exactly, but one will always be much closer to the truth than the other three. Also note: you should assume all dimensions and parameters of the disk are unchanged except for the ones mentioned.
a) If you double the number of tracks per surface, then you double the average seek time.
b) If you double the number of sectors on a track, then you double the capacity of the disk.
c) If you double the number of disk surfaces, then you double the capacity of the disk.
d) If you double the number of sectors per block, then you halve the capacity of the disk.
The right response is (C): Doubling the number of disc surfaces doubles the disk's capacity.
Regarding Bits
In both computing and digital communications, the bit is the most fundamental unit of information. The word is a combination of two binary digits. A logical state with one of two potential values is represented by the bit. The most frequent ways to represent these values are "1" or "0," although other alternatives include "true," "false," "yes," "no," "on," and "off." Custom dictates how these values relate to the real physiological states of the put resources or device, and various assignments may well be made even within the same application or device. It may be implemented physically using a two-state device.
To know more Bit
https://brainly.com/question/28799444
#SPJ4
ipv6 autoconfiguration (wired wireless networks) co-authored by brayden alloway raymond baird this lab practices setup of a wired and wireless networks on separate subnets with ipv6 autoconfiguration.
The method used by IPv6 nodes (hosts or routers) to automatically configure IPv6 addresses for interfaces is known as stateless address autoconfiguration.
The following kinds of auto-configuration are supported by IPv6: Auto-configuration with state: Since the installation and management of the nodes require a Dynamic Host Configuration Protocol for IPv6 (DHCPv6) server, this kind of configuration necessitates some amount of human involvement. When the IPv6 router on the network advertises the availability of DHCPv6 for address configuration, IPv6 addresses are automatically assigned using DHCPv6 after configuring and starting IPv6 Stateless Address Autoconfiguration. Disabling IPv6 is a common practice among IT administrators when troubleshooting networking-related issues like name resolution problems. IPv6 is a necessary component of Windows Vista and Windows Server 2008 operating systems.
Learn more about configuration here-
https://brainly.com/question/14307521
#SPJ4
which resource is nearly impossible to decrease once allocated in virtualization? answer ram storage nic cpu
RAM storage is nearly impossible to decrease once allocated in virtualization.
What is RAM for storage?A computer's short-term memory, or RAM (random access memory), is where the data that the processor is presently using is kept. RAM memory size is crucial for system performance since your computer can access RAM memory faster than data on a hard drive, SSD, or other long-term storage device.Random access memory, or RAM, is one of the most basic components of computers. RAM is a short-term memory pool where your computer keeps information it needs to access fast. RAM maintains information readily available so that your processor can swiftly access it and carry out urgent processing operations without first accessing long-term storage.To learn more about RAM, refer to
https://brainly.com/question/13748829
#SPJ4
g write a recursive program based on your definition that repeatedly prompts the user for a string and then reports whether the string is a palindrome. d. write an iterative program that does the same thing.
A recursive call of the function is what is referred to in programming languages when a programme enables you to call a function inside another function.
What is recursion with example?Recursion is the act of repeating things in a way that is self-similar. A recursive call of the function is what is referred to in programming languages when a programme enables you to call a function inside another function.
Recursion, or a function that calls itself, is supported in the C programming language. The function will enter an infinite loop if recursion is used, so programmers must be careful to define an exit condition from the function.
#include <bits/stdc++.h>
using namespace std;
bool isPalRec(char str[],
int s, int e)
{
if (s == e)
return true;
if (str[s] != str[e])
return false;
if (s < e + 1)
return isPalRec(str, s + 1, e - 1);
return true;
}
bool isPalindrome(char str[])
{
int n = strlen(str);
if (n == 0)
return true;
return isPalRec(str, 0, n - 1);
}
int main()
{
char str[] = "geeg";
if (isPalindrome(str))
cout << "Yes";
else
cout << "No";
return 0;
}
To learn more about Recursion refer :
https://brainly.com/question/24167967
#SPJ4
The variable strFirst's scope is _____.
def usernameMaker (strFirst, strLast):
return strFirst + strLast[0]
def passwordMaker (strA, numC):
return strA + str(numC)
# the main part of your program that calls the function
username = usernameMaker ('Chris', 'Smith')
dogName = 'Sammy'
favoriteNumber = 7
password = passwordMaker (dogName,favoriteNumber)
the entire program
the entire program
the usernameMaker function
the usernameMaker function
the passwordMaker function
the passwordMaker function
the main part of the program that calls the funcion
Based on the code above, The variable strFirst's scope is the passwordMaker
What does "scope of a variable" mean?
The whole body of the function or method in which the variable numC is being used—in this case, the passwordMaker method—is its local scope. This is due to the fact that the procedure uses the variable numC as a parameter variable.
It can be found in the code next to the usernameMaker, as you can see. Its scope is limited because it is only used at that time. It's also true on Edge, just in case.
Therefore, A variable's scope can be defined as its duration in the program. This indicates that a variable's scope is the block of code throughout the entire program where it is declared, utilized, and modifiable.
Learn more about variable from
https://brainly.com/question/20114161
#SPJ1
____ implies that the performance of functions such as adding sites, changing versions of DBMSs, creating backups, and modifying hardware should not require planned shutdowns of the entire distributed database.
a.) Continuous operation
b.) Local autonomy
c.) Location transparency
d.) Fragmentation transparency
Option A is correct. A homogeneous database is one where there are separate local DBMSs at at least two different locations.
Users supply two distinct authentication factors as part of a security procedure known as two-factor authentication (2FA), also known as two-step verification or dual-factor authentication. A user's credentials and the resources they can access are both better protected with the implementation of 2FA. A centralized software system called a distributed database management system (DDBMS) manages a distributed database as if it were all kept in one place. You can manage where data is stored at the table level using the database server feature known as fragmentation.
Learn more about system here-
https://brainly.com/question/13375207
#SPJ4
in data.zip, you will find training cat.txt and training grass.txt which is the training data for this project. load the data using train cat
Answer:
is were you sue the main application of relational algebra is to provide a theoretical foundation for relational databases, particularly query languages for such databases, chief among which is
Explanation:
there's another way to associate an input element's text with the element itself. you can nest the text within a label element and add a for attribute with the same value as the input element's id attribute. associate the text loving with the checkbox by only nesting the text loving in a label element and place it to the right side of the checkbox input element.
The id attribute must first be added to the< input >element before you can directly link a <label> element to it.
What is the function of the for attribute in the label element?Label and output are two elements that may both use the for attribute. When applied to a label element, it identifies the form element that the label refers to.Labels employ the for attribute. This is a reference to the element's id that this label is connected to. The browser will now immediately concentrate the relevant input box when a user clicks with their mouse on the username text.The id attribute must first be added to the input element before you can directly link a <label >element to it.To learn more about for attribute refer to:
https://brainly.com/question/14363865
#SPJ1
jamal has taken an image that he really likes, but it doesn't conform to the rule of thirds. which editing technique could improve this image?
The rule of thirds is the most well-known and widely ignored compositional "rule" in photography. It divides the frame into thirds, horizontally and vertically, and claims that placing the subject near one of the resulting intersections is preferable to placing it in the center.
What is the rule of Thirds in photography?
The rule of thirds is notable as more of a guideline because it goes against our natural inclination to make the center of our attention the center of the photograph. In real life, our eyes do not behave this way; when we look at something, we look at it directly. We don't look slightly off-axis to frame the other person to the left or right of center during a conversation.
To know more about Rule of Thirds in photography, visit: https://brainly.com/question/14560790?referrer=searchResults
#SPJ4
____ computing means the organization owns their it infrastructure and maintains it in their data centers.
Cloud computing or on-demand computing means the organization owns their it infrastructure and maintains it in their data centers.
Delivering hosted services through the internet is referred to as "cloud computing" in general. The three primary types or categories of cloud computing into which these services fit are Infrastructure as a Service (IaaS), Platform as a Service (PaaS), and Software as a Service (SaaS).
Both public and private clouds are possible. A public cloud's services are accessible online to everyone. A private cloud is a private network or data center that provides hosted services to a select number of users with specific access and authorization settings. The goal of cloud computing is to provide easy, scalable access to computer resources and IT services, whether it is private or public. The hardware and software elements are necessary in cloud environment.
The name "cloud computing" was inspired by the cloud symbol, which is frequently used in flowcharts and diagrams to represent the internet.
To learn more about Cloud computing click here:
brainly.com/question/13567281
#SPJ4
ilya has been asked to recommend a federation system technology that is an open source federation framework that can support the development of authorization protocols. which of these technologies would he recommend?
OAuth. OAuth, which stands for Open Authorization, allows third-party services to exchange information about you without requiring you to provide your password.
What is OAuth?Applications can have "safe designated access" thanks to the open-standard authorization protocol or framework known as OAuth. Delegated permission for REST/APIs is handled via the OAuth framework. Without disclosing the user's password, it enables apps to access a user's data in a limited capacity. It distinguishes between authentication and authorization and supports a range of use cases that take into account different device capabilities. The development of OAuth was a response to the direct authentication technique. This pattern became commonplace with HTTP Basic Authentication, which asks the user for a username and password. An end user interacts with their identity provider in this scenario, who creates a cryptographically signed token and sends it to the application to authenticate the user. The identity provider has the application's trust.To learn more about OAuth refer to:
https://brainly.com/question/17079128
#SPJ4
which pair of windows socket calls (among others) would be executed by a server to allow an incoming tcp connection request from a client to be serviced?
The pair of windows socket calls (among others) would be executed by a server to allow an incoming TCP connection request from a client to be serviced is: "Connect () and Accept ( )" (Option B)
What is a window socket?The Windows Sockets API, subsequently abbreviated to Winsock, is a programming interface that describes how Windows network application applications should access network services, particularly TCP/IP.
A Layered Service Provider (LSP) that controls protocols by inserting itself into the TCP/IP stack is known as a Winsock provider. This is typically used to assist in filtering web traffic, enabling QoS-type services, or hooking network traffic controls.
Learn more about window socket:
https://brainly.com/question/14319817
#SPJ1
Full Question:
Which pair of windows socket calls (among others) would be executed by a server to allow an incoming TCP connection request from a client to be serviced?
Connect () and recv( )
Connect () and Accept ( )
Bind () and Accept ( )
sock() and recv( )
you are not familiar with the exact name of a file. you know that it is unique and can remember the first four letters of the name. what key can you press in a linux shell to attempt to auto-complete the name? right arrow left arrow tab ~
You answer must be Tab
Design an algorithm, as efficient as possible, that outputs all the squares that can reach the bottom right square (again, assume that one can only go froma square to an adjacent square with a lower altitude). In particular, the algorithm should output a list of squares that if you start there, it is possible to reach the bottom right square.-Please provide runtime of algorithm-you must specify the graph that you con-struct from a non-graph input (i.e., which are the vertices, edge? Weighted or unweighted? Directed or undirected? If directed, you must specify the edges’ directions).
However, Bellman-temporal Ford's complexity is O(VE), which is higher than Dijkstra's. where there are many vertices (V) and many edges (E).
V = n, E = O for a whole network with n vertices (n2). Thus, the entire time complexity is O. (n3). If the edges in your graph have weights, it is considered to be a weighted graph; otherwise, it is said to be an unweighted graph. Each edge has a weight, which is a numerical value. Dijkstra's technique doesn't work for unweighted graphs, as I discovered from the comments. I take it that by "unweighted graphs" you mean those with a fixed weight per edge, like 1. Otherwise, it's ambiguous what the term "shortest path" might signify.
Learn more about network here-
https://brainly.com/question/13992507
#SPJ4
Assume the PC starts at address 0x00000120 and the below instructions execute. The first instruction is located at the given address. LDR R3. [10] MOV R3, #Ox42 AND R6, R5, R4 EOR R3, R5 SBC R1, R2, R5 What will be the value of the PC AFTER the last instruction executes? O 1.0x00000120 2. Ox00000128 3. Ox00000124 4. Ox00000134 5. Ox00000130
Ox00000128 , is the value of the PC AFTER the last instruction executes
What is address and instructions in pc?
The control unit in the CPU uses the address field of an instruction to access memory for the operand. The value entered in the address field can either be the address of the operand or simply a starting point from which to compute the operand's address.
So for the question the first instruction is located at the given address LDR R2.[10] MOV R3 then after R5 SBC R1,R2,R5 then at the last it executes Ox00000128 is the last one which is executed
Hence to conclude the last instruction is Ox00000128 is the last instruction which is done
To know more on address and instructions follow this link:
https://brainly.com/question/29235849
#SPJ4
An IT company has a HealthCare application with data security requirements such that the encryption key must be stored in a custom application running on-premises. The company wants to offload the data storage as well as the encryption process to Amazon S3 but continue to use the existing encryption keys.Which of the following S3 encryption options allows the company to leverage Amazon S3 for storing data with given constraints?
The S3 encryption, Server-Side Encryption with Customer-Provided Keys (SSE-C), allows the company to leverage Amazon S3 for storing data with given constraints.
What do you mean by S3 encryption?
S3 encryption encrypts your data when it is written to disks in its data centers at the object level and decrypts it for you when you access it. There is no distinction between accessing encrypted or unencrypted items as long as you authenticate your request and you have access permissions.
S3 encryption encrypts an item before saving it to disk when you use server-side encryption; the object is then decrypted when you download the object. S3 encryption lets you safeguard the data you store in AWS S3 buckets online, which is crucial for sensitive data.
To learn more about S3 encryption, use the link given
https://brainly.com/question/9979590
#SPJ4
sas miner unable to open interactive decision tree please make sure you have run the predecessors to this node and update the path
The training data is used by algorithms to divide the predictor space, or the collection of all possible values for the predictor variables, into distinct, nonoverlapping regions.
What is predecessors node?A two-child X has a predecessor who is the highest value in the left subtree and a successor who is the lowest value in the right subtree. A node's first left ancestor is its predecessor if it has no left children.In a BST, a node's predecessor is the biggest value in the left subtree. The predecessor may be one of his ancestors if the left subtree is absent. Similar to this, the smallest value found in a node's right subtree is its successor in a BST.The following node in the Binary Tree's Inorder traversal is referred to as a node's Inorder successor. For the final node in an inorder traverse, Inorder Successor is NULL. The Inorder Successor of an Input in a Binary Search Tree.To learn more about algorithms refer to:
https://brainly.com/question/24953880
#SPJ4
a company wants to utilize aws storage. for them low storage cost is paramount, the data is rarely retrieved, and data retrieval times of several hours are acceptable for them. what is the best storage option to use?
For data archiving and long-term backup, Amazon S3 Glacier provides a safe, reliable, and affordable S3 storage class. Small or big volumes of data can be stored by customers for as little as $0.004 per gigabyte per month.
S3 Glacier Deep Archive provides the lowest cost cloud storage at just $0.00099 per GB-month (or $1 per TB-month), which is much less expensive than keeping data on-premises tape or off-site archiving. A less expensive and simpler alternative to tape is S3 Glacier Deep Archive. When access patterns change, data is automatically transferred to the most economical access tier via the Amazon S3 Intelligent-Tiering storage class to reduce storage costs.
Learn more about storage here-
https://brainly.com/question/13041403
#SPJ4
After watching a 30-second commercial from Jared Inc. for fine jewelry, Mariah became certain the necklace she saw would be perfect for her mother’s birthday gift. In terms of the communication process, Mariah engaged in the task of __________.
Group of answer choices
sending
encoding
integrating
decoding
Mariah took part in the process of deciphering when it came to communication.
Decoding: What is it?
The technique of quickly matching a letter or group of letters (syllables) to its sounds (phonetic symbols) and identifying the patterns that compose syllables and words is known as decoding. This procedure is carried out automatically by a part of the brain which deals with language. Unfortunately, roughly 30% of kids cannot access this part of their brain, therefore decoding strategies must be taught very carefully and methodically, beginning with the most basic sound/letter concepts and proceeding to the more complicated. It has been established that this phonics education strategy is most successful in assisting pupils in developing reading abilities.
To know more about Decoding
https://brainly.com/question/4211230
#SPJ4
Crisha is configuring File History for the first time on her computer. She attaches an external hard drive and onfigures it as the drive for File History. Vhich of the following is most likely to occur in this scenario? a. Trisha will have to specify a folder that is not at the root of the drive for backup. b. Backup data will be added to the free space on the hard drive. c. The hard drive will be formatted before being used by File History d. Any files on the hard drive will be overwritten by backup files and folders.
Tap Search after sliding in from the right edge of the screen. In the search box, type File History settings. Choose the network or external device you want to use by selecting Select a drive. Activate File History.
The $OF contains files whose pathnames are too long to be kept on your backup device, according to this answer on answer.microsoft.com. Additionally, File History is still the program Microsoft advises using for file backups even though Backup and Restore is a feature of Windows 10 itself. In stark contrast to Backup and Restore, File History's main function is to enable you to back up individual files rather than producing a full system image.
Learn more about program here-
https://brainly.com/question/14618533
#SPJ4
The automatic antenna tuner on the ft-dx10 is designed to ensure what ohm antenna impedence is presented?.
At amateur operating frequencies, the FTDX10 is designed for 50 Ohm resistive impedance. Choose the appropriate antenna (dipole antenna, YAGI antenna, cubical quad antenna, etc.) for the operation and bands.
What is Impedance?
Impedance is the sum of resistance and reactance. It was defined as anything that can obstructs the flow of electrons within the electrical circuit. As a result, it influences current generation in the electrical circuit. It could be found in all the possible circuit components and across all possible electrical circuits. Impedance is represented mathematically by the letter Z and has the unit ohm. It's a mix of resistance and reactance.
To learn more about Circuit, visit: https://brainly.com/question/28015204
#SPJ4
BEGINNERS COMP. SCI JAVA CODING PLEASE HELP!!!
(All questions shown in picture please!)
Answer:
8)
Scanner scanner = new Scanner(System.in);
System.out.print("Enter a number: ");
int num = scanner.nextInt();
for (int i = 0; i < num; i++) {
System.out.print("* ");
}
9)
for (int i = 1; i <= 10; i++) {
System.out.print(i * i + " ");
}
10)
for (int i = 1; i < 9; i++) {
if (i % 3 == 0) {
System.out.println("?");
} else {
System.out.println(i);
}
}
11)
Scanner scanner = new Scanner(System.in);
System.out.println("Enter a number: ");
int n = scanner.nextInt();
int factorial = 1;
for (int i = 1; i <= n; i++) {
factorial = factorial * i;
}
System.out.println(factorial);
I will be thankful I’d you help
The information used to explain the graph is known as chart title. Hence option B is correct.
What are statistical graphs?Statistical graphs are defined as a graphic representation of applied mathematical knowledge. To make it simpler to understand and interpret statistical data, a set of data is represented by statistical graphs.
A table chart is just another type of information presentation. In boxes or columns of the table, there are words, numbers, or a mix of the two. It depicts a group of facts and how they relate to one another.
Thus, the information used to explain the graph is known as statistical graphs.
To learn more about statistical graphs, refer to the link below:
https://brainly.com/question/28790913
#SPJ1
a name defined in an outer scope is not available in all blocks nested inside that scope. true false
True. A name defined in an outer scope is not available in all blocks nested inside that scope.
How a name defined in an outer scope is not available in all blocks nested inside that scope? A name has local scope or block scope if it is declared in a block. A name with local scope can be used in that block and in blocks enclosed within that block, but the name must be declared before it is used. When the block is exited, the names declared in the block are no longer available.Parameter names for a function have the scope of the outermost block of that function. Also, if the function is declared and not defined, these parameter names have function prototype scope.When one block is nested inside another, the variables from the outer block are usually visible in the nested block. However, if the declaration of a variable in a nested block has the same name as a variable that is declared in an enclosing block, the declaration in the nested block hides the variable that was declared in the enclosing block. The original declaration is restored when program control returns to the outer block. This is called block visibility.To learn more about Nested blocks refer to:
https://brainly.com/question/17102008
#SPJ4
A name defined in an outer scope is available in all nested blocks within that scope.
What is scope of variable?In layman's terms, a variable's scope is its lifetime in the program. This means that the scope of a variable is the entire program's block of code where the variable is declared, used, and can be modified. The following section will teach you about variable local scope.A scope is a program region, and there are generally three places where variables can be declared: Local variables are defined within a function or a block, while formal parameters are defined in the definition of function parameters. Global variables are variables that exist outside of all functions.The context in which a name appears is referred to as its scope.To learn more about scope refer to :
https://brainly.com/question/20328027
#SPJ4
the 4gl languages that enable nonprogrammers to use certain easily understood commands to search and generate reports from a database are called
The 4gl languages that enable non-programmers to use certain easily understood commands to search and generate reports from a database are called query.
What is 4gl?A computer programming language that is part of a class that is intended to improve upon third-generation programming languages (3GL) is known as a fourth-generation programming language (or 4GL).
Every generation of programming language strives to provide a greater level of abstraction of the internal workings of the computer hardware, making the language more user-friendly, potent, and adaptable.
Despite the fact that the definition of 4GL has evolved over time, it can still be characterized by the fact that it works more with large groups of data at once rather than concentrating on just bits and bytes.
The support for report generation, database management, mathematical optimization, GUI development, and web development may be found in languages that advertise themselves as 4GL. According to some academics, domain-specific languages include 4GLs as a subset.
Learn more about 4GL
https://brainly.com/question/9978575
#SPJ4
19. open the sortedstates query in design view. modify the query to sort the state field in ascending order. each state should appear only once. save the query. open the query in datasheet view and then close it.
To open the sortedstates query in design view you can use Queries section.
What is Queries section?In a database, the queries section is a part of the user interface where you can create and manage queries.
A query is a request for information from the database, and it is used to extract, filter, and manipulate data from the database. Queries are typically written in a specialized query language, such as SQL, and they can be used to perform a wide range of tasks, such as selecting specific records, calculating summaries, or combining data from multiple tables.
The queries section of a database is where you can create new queries, edit existing queries, and run queries to see the results.
This section is typically accessed through the database software's user interface, and it is where you can manage and organize your queries.
To Know More About Database, Check Out
https://brainly.com/question/29554934
#SPJ1
on which printer technology is physical print head wear the biggest concern? choose the best response.
The printer technology that is physical print head wear the biggest concern is option A: Impact.
What is the aim of an impact printer?A printed character is created when an impact printer rubs a plastic or metal letter against paper while using an inked ribbon. Impact printing was widely used in early versions of word processing, desktop printing for individuals, and commercial data processing.
Therefore, in the context of the above, An ink ribbon and paper come into touch directly when an impact printer is operating. The ink ribbon is struck by a metal or plastic head, which causes the ribbon to press against the paper and print the desired character (letter, digit, dot, or line) on the page. Thus it fit into the question above.
Learn more about printer technology from
https://brainly.com/question/21488180
#SPJ1
See full question below
.
On which printer technology is physical print head wear the biggest concern? Choose the best response.
answer choices
Impact
Inkjet
Laser
Thermal
there is no related service information or tsbs open for this symptom. the concern is still present. what is the next step?
The next step if the concern of no related service information or tsbs open for this symptom is still present is to Isolate what fuse and circuit powers the rear defrost using an electrical schematic
A fuse is a device that protects an electrical system against overcurrent. It has a tiny wire or metal that melts due to high current and opens the circuit, preventing erroneous currents from flowing. Different depiction schemes are provided by the IEC, IEEE, and ANSI. The schematic is a diagram that depicts the logical relationships that exist. A schematic is a graphic that specifies the logical connections between components on a circuit board, whether fixed or flexible. It essentially illustrates how the elements are electronically interconnected. A netlist, which is a basic data structure that lists every connection in the design, is included in a schematic.
Learn more about electrical schematic here:https://brainly.com/question/27319880
#SPJ4
refer to the exhibit. a user pc has successfully transmitted packets to www.cisco. which ip address does the user pc target in order to forward its data off the local network?
The data of the local network is 172.20.0.254.
What is local network?A local area network is a type of computer network that connects computers in an area that is relatively small, like a home, school, lab, university campus, or office building. A wide area network, on the other hand, typically uses leased telecommunications circuits and spans a greater geographic area. Simply go to the network settings on your computer, laptop, or Mac and select the option to set up a new connection or network. Plugging in an Ethernet cable with one end in the computer and the other in your router or network switch makes adding more computers to your LAN a straightforward process. A local area network (LAN) is a group of interconnected devices that are physically located in a building, office, or house.To learn more about local network refer to:
https://brainly.com/question/8118353
#SPJ4