A net force applied to a 15.0 kg box produced an acceleration of 4.2 m/s2. If the same net force was applied to a 10 kg box, what would be the acceleration to the nearest tenth of a m/s2?

Answer:

load (l)=400N

Effort(E)=50N

mechanical advantage (MA)= load ÷Effort

(ma)=400÷50

(ma)=8

Explanation:

I copy pasted from the answer from the same question. Remember to first check if ur question is there

Answer:

Its the third law of motion.

Explanation:

Newton's third law of motion states that every action has equal and opposite reaction.

Answer:

B

Explanation:

This is a balanced force. In a balanced force, nothing happens.

Answer:

 y =  [tex]-\frac{1}{4}[/tex]x + 3

Explanation:

The equation of a straight line is given as:

              y  =  mx + c

y and x are the coordinates

m is the slope

c is the y -intercept

 The y-intercept = 3;

Slope  = [tex]\frac{y_{2} - y_{1} }{x_{2} - x_{1} }[/tex]

x₁ = 0

x₂ = 4

y₁ = 3

y₂ = 2

 Slope = [tex]\frac{2-3}{4 -0 }[/tex]  = [tex]-\frac{1}{4}[/tex]

       y = mx + c

       y =  [tex]-\frac{1}{4}[/tex]x + 3

Answer:

Increasing the temperature of the copper made the final temperature increase and decreasing the temperature of the copper made the final temperature decrease. ... How does changing the initial mass of the copper affect how much heat energy it has? The more copper, the more heat energy.

Explanation:

Decreasing the temperature of the copper made the final temperature decrease. But the mass remains constant.

Heat is energy that is transmitted from one body to another as a result of a temperature differential. When two bodies of different temperatures come into contact,

Thermal expansion is the tendency of matter to alter its form, area, volume, and density in response to a change in temperature.

Thermal expansion is caused by heating. The mass remains constant. The loudness rises. As a result, the density drops.

To learn more about heat energy refer to the  link;

https://brainly.com/question/1495272

Answer:

A bar chart is typically used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.

Explanation:

A bar chart also known as a bar graph can be defined as the graphical representation of data (informations) by using vertical columns or rectangular bars. When a data set is observed, a bar chart can be used to graphically represent or record the total or overall amount of information contained therein. Generally, bar charts are used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.

The bar graph has a x-axis and a y-axis used to represent the various categories of data collected.

In this scenario, the x-axis is used to denote the points earned by the teams while the y-axis is used to denote the seasons as seen in the image attached.

Hence, point scores by team (Team A, B and C) per seasons (2002, 2003, 2004 and 2005) can best be compared through the use of a bar chart (graph).

Answer:

Answer above is correct i only put this:

Explanation:

A bar chart is typically used for the comparison of informations obtained from a data collection by representing each value (information) with rectangular bars respectively.

Answer:

735N

Explanation:

Weight is a measurement of force.

F = Force

m = mass

a = acceleration

F = m*a

F = 75kg*9.8m/s²

F = 735N

Answer:

40.1m/s

Explanation:

This is a kinematics problem

x = 82m

a = -9.8m/s^2

v(initial) = 0

Find: v(final)

Using kinematics equation:

vf^2 = vi^2 + 2a(delta)x

vf^2 = 0 + 2*(-9.8)*(82)

vf = sqrt(1607.2) = 40.09m/s

The is traveling with a velocity of 40.1m/s when it hits the ground.

Answer:

B. New cells are created from pre-existing cells in the human body.

Explanation:

According to the cell theory, the correct assumption from the student's investigation is that "new cells are created from pre-existing cells in the human body".

So, the student is correct to say that new cells are created from pre-existing cells in the human body.

Answer:

The average speed is 83.3 m/s

Explanation:

Answer:

She is likely to crash because her flight gradient is lesser than the flight gradient required gradient to avoid crashing

Explanation:

The given parameters are;

The required gradient of the plane Ashley is flying needs to reach in order to take off and not crash = 360 m/km

The initial elevation of the plane Ashley is flying = Sea level = 0 m

The goal Ashley intends to make = Elevation of 1000 m at 2.8 km. distance

∴ Ashley's goal = Traveling from sea level to 1000 m at 2.8 km horizontal distance

We have;

The gradient  = Rate of change of elevation/(Horizontal distance)

Therefore;

The gradient of Ashley's flight = (1000 - 0)/(2.8 - 0) = 357.143 m/km

The gradient of Ashley's flight ≈ 357.143 m/km which is lesser than the required 360 m/km in order to take off and not crash, therefore, she will crash.

Answer: An independent variable is the variable which is changed. Experiments are usually published to communicate findings to the scientific community.

Disproving a hypothesis means it cannot be tested again.

Explanation: i hoped that helped.

Answer:

57,6N

Explanation:

To find the component  of a force on the x-axis we can simply do:

F * cos(36) = 72N * 0.8 = 57,6N

Answer:

1. The subduction zone serves as the meeting point for two tectonic plates.

2. At the Mid- Ocean ridge, decompression melting occurs.

3 What causes the magma to rise is the increase in pressure caused by collection of gases by the magma.

Explanation:

Subduction zone is define as a zone where tectonic plates ( an oceanic plate slides beneath a continental plate) meets and contributes to the rise of magma to the surface in geological sciences.

At the Mid - Oceanic ridge, decompression melting occurs. As mantle ascends beneath the mid-ocean ridge, less and less rock lies above it, so large pressure changes occur, which leads to melting. The melt is less dense than the solid, and rises to the surface to form the oceanic crust.

At the subduction zone the magma that is formed is usually made up of silica rich lava. Thick silica rich magma does not release the gasses very easily so they build up inside the magma chamber. As the gasses collect in the chamber, the pressure rises. It is possible for the pressure to rise so much that the chamber cannot contain the magma and it erupts explosively.

Answer: IT IS TRUE

Explanation:

Hope this helps

Plyometrics can help a person maintain cardiorespiratory fitness T

It is TRUE that plyometrics can help a person maintain cardiorespiratory fitness

Plyometrics is a type of exercise training that works with the principle of using speed and force of different movements to build muscle power.

Plyometrics include different types of exercises such as pushups, throwing, running, jumping, and kicking.

Learn more about plypmetrics:

https://brainly.com/question/1526420

Answer:

V₀ = 5.47 m/s

Explanation:

The jumping motion of the Salmon can be modelled as the projectile motion. So, we use the formula for the range of projectile motion here:

R = V₀² Sin 2θ/g

where,

R = Range of Projectile = 3.04 m

θ = Launch Angle = 41.7°

V₀ = Minimum Launch Speed = ?

g = 9.81 m/s²

Therefore,

3.04 m = V₀² [Sin2(41.7°)]/(9.81 m/s²)

V₀² = 3.04 m/(0.10126 s²/m)

V₀ = √30.02 m²/s²

V₀ = 5.47 m/s

Answer:

The velocity of cart B after the collision is 1.29 m/s.

Explanation:

We can find the velocity of cart B by conservation of linear momentum:

[tex] p_{i} = p_{f} [/tex]

[tex] m_{A}v_{A_{i}} + m_{B}v_{B_{i}} = m_{A}v_{A_{f}} + m_{B}v_{B_{f}} [/tex]

Where:

[tex]m_{A}[/tex] is the mass of cart A = 600 g = 0.6 kg            

[tex]m_{B}[/tex] is the mass of cart B = 200 g = 0.2 kg

[tex]v_{A_{i}}[/tex] is the inital velocity of cart A = 0.7 m/s

[tex]v_{A_{f}}[/tex] is the final velocity of cart A = 0.27 m/s

[tex]v_{B_{i}}[/tex] is the initial velocity of cart B = 0

[tex]v_{B_{f}}[/tex] is the final velocity of cart B =?

Taking the left direction as the positive horizontal direction:

[tex] 0.6 kg*0.7 m/s + 0 = 0.6 kg*0.27 m/s + 0.2 kg*v_{B_{f}} [/tex]

[tex] v_{B_{f}} = 1.29 m/s [/tex]

Therefore, the velocity of cart B after the collision is 1.29 m/s.

I hope it helps you!  

Answer:

Explanation:

The time taken can be found by using the formula

[tex]t = \frac{d}{v} \\ [/tex]

d is the distance

v is the velocity

From the question we have

[tex]t = \frac{20}{4} \\ [/tex]

We have the final answer as

Hope this helps you

Explanation:

distance

speed =_________

time

distance = speed × time

= 2.5 × 5.0

distance = 12.5 m

Answer:

There are many different systems involved in when we exercise, the three main ones are the Respiratory system which is involved in breathing the circulatory system which is about circulation of blood around the body and finally the muscular system and finally the Muscular system which is about how we move.

Explanation:

If the data consistently do not support the hypothesis, then CLEARLY, the hypothesis is NOT a reasonable explanation of what you are investigating. The hypothesis is rejected, and we search for a new interpretation, an new hypothesis that supports the experimental data

Respiratory and circulatory systems are the two systems within the human body that work together during exercise.

The respiratory system:

The circulatory system:

During exercise:

To learn more about respiratory system, circulatory system, blood, exercise, and oxygen here,

https://brainly.com/question/13128077

#SPJ2

Answer:

correction of farsightedness uses a converging lenses that compensates for the under convergence by the eye. the converging lens produces an image farther from the eye than the object so that farsighted can see it clearly.

Answer:

because nono gravity

Explanation:

no gravity

Answer:

100km/hr

Explanation:

From the problem statement we know that distance of the trip is 115km

Expected time for the trip = 1.2hrs

→ If she spends the first half-hour going 90km/hr,

    Here  time  = 0.5hr

              speed  = 90km/hr

 The distance covered;

    Distance covered   =  Speed x time

    Distance covered  = 90 x 0.5  = 45km

→The remaining distance will be:

        Total distance - distance covered

              115km  - 45km  = 70km

→ The remaining time;

      1.2hr - 0.5hr  = 0.7hr

 Speed  = [tex]\frac{distance}{time}[/tex]  

  Insert the parameters and solve;

  Speed  = [tex]\frac{70}{0.7}[/tex]   = 100km/hr

For the remaining lap, the tourist must travel at a rate of 100km/hr to catch up.

Answer: kinetic energy is Energy of motion.

Explanation:

Answer:

Velocity = 15.87m/s

Explanation:

Given the following data;

Distance, d = 200000m

Time, t = 12600secs

*To find the velocity*

Velocity can be defined as the rate of change in displacement (distance) with time. Velocity is a vector quantity and as such it has both magnitude and direction.

Mathematically, velocity is given by the equation;

[tex]Velocity = \frac{distance}{time}[/tex]

Substituting into the equation, we have;

[tex]V = \frac{200000}{12600}[/tex]

Velocity = 15.87m/s

Therefore, the velocity of the car is 15.87 meters per seconds due west.

Answer:

Explanation:

The distance covered by an object given it's velocity and time taken can be found by using the formula

distance = velocity × time

From the question we have

distance = 1.5 × 120

We have the final answer as

Hope this helps you

Answer:

180 meters

Explanation:

1.5 m/s x 120 s

Answer:

A. carbon and boron

Explanation:

Carbon and boron is not an alloy.

An allow forms between metals and metals using their huge electron could.

Carbon is a non-metal, boron is a also a non-metal

Two non-metals combining together does not make an alloy.

Iron, nickel, aluminum  are all metals.

Answer:

carbon and boron

Explanation:

carbon and boron