Answer:
greater than 10 Newton .
When someone asked you if you have a special talent.
Answer:
lowkeyyyy
explanation:
What is described as a special class of materials that conduct electric charge better than electrical insulators but not as well as electrical conductors?
magnets
ions
Semiconductors
isotopes
pls help and sorry for the spam
Answer: I think ions I’m not 100% sure if it’s not let me know
Explanation:
What do we call the energy that is transferred to
a substance without the substance's temperature
changing?
Answer:
Latent heat
Latent heat is the heat needed to change a state without a change in temperature.
Explanation:
Hope this helps :D
1. What are Three Things you would build differently if you were to build the rocket again?
2. What are Two Things you could do to improve the flight of your rocket?
3. What practical design advice would you give to future students building a paper rocket for the first time?
1 ; Components. Rockets consist of a propellant, a place to put propellant (such as a propellant tank), and a nozzle.
2; The aerodynamic shape of the nose cone helps prevent air from slowing the rocket. The fins help guide the rocket to fly straight. Finally, the propellant system includes a mixture of fuel and a chemical called an "oxidizer" that gives off oxygen. The fuel and oxidizer burn together to launch the rocket off the ground.
3; At supersonic speeds (faster than the speed of sound), the best shape is a narrower and sharper point. Rockets with a larger diameter have more drag because there is more air being pushed out of the way
please HELP ME!! i will give brainliest :)
Medical imaging of your bones and some other body parts uses a type of electromagnetic wave that
can pass through matter and produce two-dimensional images on a detector behind the body part. What
type of electromagnetic radiation does this process use? How is the image produced?
Answer:
It uses x-rays. The image is produced by polarizing exciting hydrogen nuclei of water molecules in the human tissue which will produce the image.
Answer:
It uses x-rays. The image is produced by polarizing exciting hydrogen nuclei of water molecules in the human tissue which will produce the image.
haha ctrl + v go brrrrrrrrrrrrrr
Una carga de -10Mc está situada a 20cm delante de otra carga de 5 Mc. Calcular la fuerza electrostática en Newton ejercida por una carga sobre la otra. a).- Representar la Fuerza Electrostática. b).- Calcular la Intensidad de las Fuerzas.
Answer:
a) force between them is attraction, b) F = 1.125 10⁻² N
Explanation:
In this case the electric force is given by Coulomb's law
F =[tex]k \frac{q_1q_2}{r^2}[/tex]
In the exercise they give us the values of the loads
q1 = - 10 mC = -10 10⁻³ C
q2 = 5 mC = 5 10⁻³ C
d = 20 cm = 0.20 m
let's calculate
F = 9 10⁹ [tex]\frac{10 \ 10^{-3} \ 5 \ 10^{-3}}{0.20^2}[/tex]
F = 1.125 10⁻² N
To find the direction of the force we use that charges of the same sign repel each other, as in this case there is a positive and a negative charge, the force between them is attraction
Net force is also a vector quantity which has both magnitude and direction. Using complete sentences, describe the net force acting upon the object during the course of the elliptical orbit. Comment on both the magnitude and the direction.
Answer:
In this movement, both the magnitude and the direction of the force change
Explanation:
A body that moves in an elliptical path must be subjected to a force that is pointed towards one of the foci, therefore the force is central.
The magnitude of this force must be greater when the two bodies are closer and its directional changes, but it always points to the focus where the body that originates the force is.
In this movement, both the magnitude and the direction of the force change
A car is traveling at 75 m/s. 50 seconds later it is traveling at 25 m/s. What is the car’s acceleration?
Answer:
a = -1 m/s^2
Explanation:
Vi = 75 m/s
Vf = 25 m/s
t = 50 s
Plug those values into the following equation:
Vf = Vi + at
25 = 75 + 50a
---> a = -1 m/s^2
How is the conservation of renewable resources different from the conservation of nonrenewable resources
Which conclusion about the atom can be drawn from Rutherford’s gold foil experiment?
A.Has a zero oxidation #
B.Has a neutral charge
C.Has a small negative center
D.Has a small positive center
The increasing speed of a falling object is caused by
gravity
force
mass
speed
(pick one)
Answer:
gravity
Explanation:
Technically it would be mass or speed because it depends on ow big or small it is, but if you break it down it will be due to gravity as it gets stronger
identify global climate zones and characteristics of each
research the different time zone around the world, and characteristics of each
6. A ball kicked from ground level at an initial velocity of 60 m/s and an angle with ground
reaches a horizontal distance of 200 meters.
What is the size of angle ?
(2 points)
12.50
11.5
16.5°
66.5
Answer:
66.5 is the answer
A 70mm long blockhas cross-section of 50mm by 10mm the block is subjected to forces 60KN (tension) on the 50mm by 10mm face and 110KN (Compression) on the 70mm by 10mm face Determine the force to be applied on the 70mm by 50mm face such that there is no change in volume
Answer:
970 kN
Explanation:
The length of the block = 70 mm
The cross section of the block = 50 mm by 10 mm
The tension force applies to the 50 mm by 10 mm face, F₁ = 60 kN
The compression force applied to the 70 mm by 10 mm face, F₂ = 110 kN
By volumetric stress, we have that for there to be no change in volume, the total pressure applied by the given applied forces should be equal to the pressure removed by the added applied force
The pressure due to the force F₁ = 60 kN/(50 mm × 10 mm) = 120 MPa
The pressure due to the force F₂ = 110 kN/(70 mm × 10 mm) = 157.142857 MPa
The total pressure applied to the block, P = 120 MPa + 157.142857 MPa = 277.142857 MPa
The required force, F₃ = 277.142857 MPa × (70 mm × 50 mm) = 970 kN
What benefits can you gain as you engage yourself with latin dances?
Answer:
hispanic popularity
Explanation:
:)
+
CaCl 2
+
_C2HCl3
C2H2C14
H 20
+
Ca(OH) 2 →
PLEASEEE HELP ASAP!!!!!
Answer:
h = 2.15 m
Explanation:
We can use the third equation of motion here to find out the height from which the cat fell that is the height of the refrigerator.
[tex]2gh = v_{f}^2 - v_{i}^2[/tex]
where,
g = acceleration due to gravity = 9.81 m/s²
h = height of refrigerator = ?
vf = final speed of cat = 6.5 m/s
vi = initial speedof cat vertically = 0 m/s
Therefore,
[tex]2(9.81\ m/s^2)h = (6.5\ m/s)^2 - (0\ m/s)^2\\h = \frac{(6.5\ m/s)^2}{(2)(9.81\ m/s^2)}[/tex]
h = 2.15 m
if a person can jump maximum along distance of 3m ,on the earth how far could be jump on the moon where acceleration due to gravity is 1÷16 of that on the earth
Answer:
The person can jump 48 m on the Moon
Explanation:
The question parameters are;
The maximum long jump distance of a person on Earth, [tex]R_{max}[/tex] = 3 m
The acceleration due to gravity on the Moon = 1 ÷ 16 of that on Earth
The distance the person can jump on the Moon is given as follows;
A person performing a jump across an horizontal distance on Earth (under gravitational force) follows the path of the motion of a projectile
The horizontal range, [tex]R_{max}[/tex], of a projectile motion is found by using the following formula
[tex]R_{max} = \dfrac{u^2}{g}[/tex]
Where;
g = The acceleration due to gravity = 9.8 m/s²
Therefore, we have;
[tex]R_{max} = 3 \, m = \dfrac{u^2}{9.8 \, m/s^2 }[/tex]
u² = 3 m × 9.8 m/s² = 29.4 m²/s²
Therefore, on the Moon, we have;
The acceleration due to gravity on the Moon, [tex]g_{Moon}[/tex] = 1/16 × g
∴ [tex]g_{Moon}[/tex] = 1/16 × g = 1/16 × 9.8 m/s² ≈ 0.6125 m/s²
[tex]R_{max \ Moon} = \dfrac{u^2}{g_{Moon}} = \dfrac{29.4 \ m^2/s^2}{0.6125 \, m/s^2 } \approx 48 \, m[/tex]
The maximum distance the person can jump on the Moon with the same velocity which was used on Earth is [tex]R_{max \ Moon}[/tex] ≈ 48 m
Compared to Earth's moon, the moons of Mars are
equal in size.
larger in size.
made of different substances.
smaller in size.
A 50 kg trapeze artist falls from a height of 10 m, and has a speed of 14 m/s just before hitting the safety net. How much time is needed in order for them to stop if the maximum amount of force they can withstand is 500N?
Answer:
t = 1.4 s
Explanation:
momentum of the trapeze just before hitting the net = 50 x 14 kg m/s
= 700 kg m/s
final momentum = 0
change in momentum required = 700 - 0 = 700
If F be the maximum force and t be the time of action of force
impulse = force x time = F x t
500 x t
impulse = change in momentum
500 x t = 700
t = 1.4 s .
If an object straight down falls 30m in 2 sec , how far will falls in 4 sec , what is the tail wind and headwind
Answer:
60 sec
Explanation:
60m because in every 30min in 2sec so 30 × 2= 60 min
This force is a pull between all objects. It is the force that gives us weight here on Earth. And, if we throw a rock off of a cliff, it is the force that causes the rock to fall to Earth. What is this force?
Answer:
Gravity.
Explanation:
Gravity is considered to be a universal force of attraction which acts between all objects that has both mass, energy and occupy space. Therefore, it acts in such a way as to bring objects together.
Additionally, the gravity of earth makes it possible for all physical objects to possess weight.
This ultimately implies that, this force is a pull between all objects. It is the force that gives us weight here on Earth. And, if we throw a rock off of a cliff, it is the force that causes the rock to fall to Earth.
HELP PLEASE!!! I HAVE TO GET THIS IN QUICK!!
How will you classify speed, a scalar or a vector quantity? Explain
Answer:
speed is a scalar quantity
because it has magnitude but not the direction
vector quantity have magnitude as well as direction
hope it helps
Which 2 forces are always opposite from one another
Answer:
Any two forces that are always opposite from one another are :
Explanation:
1. action forces
2. reaction forces
A physics teacher is reheating her leftover pizza lunch in the very old teacher breakroom microwave. The microwave is so old that it doesn't even turn the food as it cooks. When the teacher takes her food out and eats it, she discovers that parts of the pizza are scalding hot, while other parts are still very cold. She explains to the students that a microwave works by producing standing waves that result in heating. She asks the students to explain why some parts of the pizza are hot while others are still cold. Below are their responses:
Answer: At the antinodes of a standing wave, the wave is shaking very rapidly, causing those parts of the pizza to get hot. At the nodes, the wave is not shaking much at all, causing those parts of the pizza to stay cold."
Explanation:
antinodes vibrate and are the opposite of nodes which are stationary.
Some parts of the pizza are hot while others are still cold. Because the antinodes of a standing wave shake very quickly, causing the hot spots on the pizza to appear.
What are the differences between nodes and antinodes?The fact that there are locations along the medium that appear to be standing still is a feature of every standing wave pattern.
The term "node" refers to these sites, which are also known as "points of no displacement." Other sites along the medium are subjected to vibrations with substantial positive and negative displacements.
During each vibrational cycle of the standing wave, these are the locations that experience the most displacement. These points are termed "antinodes" because they are the polar opposites of nodes.
The antinodes of a standing wave shake very quickly, causing the hot spots on the pizza to appear. The wave isn't moving very much at the nodes, therefore those areas of the pizza stay cold."
Hence some parts of the pizza are hot while others are still cold.
To learn more about antinodes refer to the link;
https://brainly.com/question/2608876
The pilot directs the aircraft to fly due north at 600km/h. A side-wind blows at
100km/h towards the east. What will be the aircraft's resultant velocity? (Give both its
speed and direction)
Answer:
678.2 km/h and 80.54° north of east
Explanation:
From the question,
Using pythagoras theorem,
a² = b²+c²..................... Equation 1
Where a = resultant velocity
Given: b = 600 km/h, c = 100 km/h
Substitute these values into equation 1
R² = 600²+100²
R² = 360000+10000
R² = 460000
R = √460000
R = 678.2 km/h.
And the direction is
tanθ = 600/100
tanθ = 6
tanθ = 6
θ = tan⁻¹(6)
θ = 80.54°.
Hence the resultant velocity of the aircraft is 678.2 km/h and 80.54° north of east
Please help me I don’t get how to do it!!! A ray of light has a wavelength
433 nm in water (n = 1.33). What
is its wavelength in a vacuum?
(Remember, the wavelength is longer in
a vacuum.)
(Unit = nm)
Answer:
The wavelength of the light in a vacuum is 575.89 nm
Explanation:
The given parameter in the are;
The wavelength of the ray of light in water, λ₁ = 433 nm
The refractive index of water, n₁ = 1.33
The relationship between wavelength, λ, and refractive index, 'n', is presented as follows;
λ₁·n₁ = λ₂·n₂
Where;
λ₁ and λ₂ are the wavelength of the wave within the two mediums
n₁ and n₂ are the respective refractive indices of the mediums
The refractive index of vacuum, n₂ = 1
Let λ₂ represent the wavelength of light in vacuum
Therefore, we have;
1.33 × 433 nm = 1 × λ₂
∴ λ₂ = 1.33 × 433 nm/1 = 575.89 nm
Therefore, the wavelength in a vacuum, λ₂ = 575.89 nm
Answer: 576
Explanation: Its correct for acellus!
what is the bond between Hydrogen and Chlorine?
What are two properties that lead to ElectroMagnetic Interactions? please help this is due very soon!!!
Answer:
Electric charge. A fundamental property that leads to the electromagnetic interactions among particles that make up matter.