A model of a chemical reaction is shown below. Which of the following best describes the number of atoms for each element in the chemical reaction? A. There are 6 carbon atoms, 12 hydrogen atoms and 18 oxygen atoms on the reactant side and 6 carbon atoms, 12 hydrogen atoms, and 3 oxygen atoms on the product side. B. There are 6 carbon atoms, 12 hydrogen atoms and 18 oxygen atoms on the reactant side and 6 carbon atoms, 12 hydrogen atoms and 18 oxygen atoms on the product side. C. There are 6 carbon atoms, 12 hydrogen atoms and 8 oxygen atoms on the reactant side and 6 carbon atoms, 12 hydrogen atoms and 18 oxygen atoms on the product side. D. There are 6 carbon atoms, 12 hydrogen atoms and 12 oxygen atoms on the reactant side and 1 carbon atom, 2 hydrogen atoms, and 3 oxygen atoms on the product side.

Answers

Answer 1

The following which best describes the number of atoms for each element in the chemical reaction C₆H₁₂0₆ +60₂---> 6H₂0 + 6CO₂ is that there are 6 carbon atoms, 12 hydrogen atoms and 18 oxygen atoms on the reactant side and 6 carbon atoms, 12 hydrogen atoms and 18 oxygen atoms on the product side which is therefore denoted as option B.

What is a Chemical equation?

This is referred to as the representation of a chemical reaction in the form of symbols and formulae and depicts the elements or compounds which are involved.

According to the law of conservation of mass, the masses and elements of the products and reactants must be the same which is therefore why the total number of elements of carbon, hydrogen and oxygen on the reactant and product side are equal.

Read more about Chemical equation here https://brainly.com/question/11231920

#SPJ1

The full question is:

A model of a chemical reaction is shown below C₆H₁₂0₆ +60₂---> 6H₂0 + 6CO₂. Which of the following best describes the number of atoms for each element in the chemical reaction?


Related Questions

As astronauts take off in a rocket moving away from earth how does their mass and or weight change

Answers

Answer:

As you travel away from the Earth's surface, your mass stays the same but your weight reduces as gravitational pull decreases. For example, an astronaut orbiting the Earth and floating weightlessly in the cabin still has the same mass.

Explanation:

How many kilojoules are released when 2.60 mol of H2O2 reacts?

Answers

On the decomposition of 2.60 moles of hydrogen peroxide, 254.8 KJ energy will be released.

What is a decomposition reaction?

A decomposition reaction can be defined as a reaction in which a chemical compound breaks down into two or more simple compounds. The general form  to express a decomposition reaction is:

AB    →   A   +    B

Most decomposition reactions accept energy in the form of heat, radiation, or electricity. The decomposition reaction of hydrogen peroxide is shown below:

2H₂O₂(l)    →   2H₂O (l)  +  O₂(g)                        ΔH = - 196 KJ/mol

2 moles of  hydrogen peroxide decomposes energy released = 196 KJ

2.60 of H₂O₂  decomposes energy released = 196 ×2.60/2 = 254.8 KJ

Learn more about decomposition reactions, here:

brainly.com/question/16987748

#SPJ1

The rate constant for the first order transformation of cyclopropane to propene is 5.40 x 10-2/hr. What is the half-life of this reaction? What fraction of the cyclopropane remains after 51.2 hours? What fraction remains after 18.0 hours? Question: The rate constant for the first order transformation of cyclopropane to propene is 5.40 x 10-2/hr. What is the half-life of this reaction? What fraction of the cyclopropane remains after 51.2 hours?

Answers

To solve this type of question we must know the concept of rate law for first order kinetics and first law related to this. Therefore, the half-life of the given compound is 12.8hr.

What is the expression for rate law for first order kinetics?

There are two kinds of rate law in chemical kinetics one is differential rate law and other is integrated rate law.

The expression for half life for first order reaction is

[tex]t_{1/2} = \frac{0.693}{K}[/tex]

k= rate constant= 5.40×10⁻²/hr

Substituting all the given values in the above equation, we get

[tex]t_{1/2} = \frac{0.693}{ 5.40 *10^{-2}}[/tex]

On solving this, we get

half life =0.128×10²=12.8hr

Therefore, the half-life of the given compound is 12.8hr.

Learn more about rate law for first order kinetics here:

https://brainly.com/question/12593974

#SPJ1

__Sr(OH)2 + Al2 (SO4)3 —> __ SrSO4 +___ Al(OH)3

Answers

The balanced chemical equation is 3 Sr(OH)₂ + Al₂(SO₄)₃[tex]\rightarrow[/tex] 3 SrSO₄ + 2 Al(OH)₃.

What is chemical equation?

Chemical equation is a symbolic representation of a chemical reaction which is written in the form of symbols and chemical formulas.The reactants are present on the left hand side while the products are present on the right hand side.

The first chemical equation was put forth by Jean Beguin in 1615.By making use of chemical equations the direction of reaction ,state of reactants and products can be stated. In the chemical equations even the temperature to be maintained and catalyst can be mentioned.

Learn more about chemical equation,here:

https://brainly.com/question/28294176

#SPJ1

Consider the following reaction:
2NiO(s)→2Ni(s)+O2(g)
If O2 is collected over water at 40.0 ∘C and a total pressure of 746 mmHg , what volume of gas will be collected for the complete reaction of 24.23 g of NiO ?

Answers

Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, the volume of gas will be collected for the complete reaction of 24.23 g of NiO is 4.19L.

What is ideal gas equation?

Ideal gas equation is the mathematical expression that relates pressure volume and temperature. There is no force of attraction between the particles.

Mathematically the relation between Pressure, volume and temperature can be given as

PV=nRT

where,

P = pressure of gas sample

V= volume of gas sample

n =number of moles of gas sample

T =temperature of gas

R = Gas constant = 0.0821 L.atm/K.mol

Substituting all the given values, we get

Molar mass of NiO=74.6928g/mol

mass of NiO= 24.23 g

Number of moles of NiO =0.324

From reaction the molar ratio between NiO and O[tex]_2[/tex] is 2:1

Number of moles of O[tex]_2[/tex] =0.16moles

applying ideal gas equation

0.98atm×V =0.16× 0.0821×313

V =4.19L

Therefore, the volume of gas will be collected for the complete reaction of 24.23 g of NiO is 4.19L.

To learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ1

Define inference and explain how it is used to form conclusions.

Answers

Answer:

an inference is an educated answer based on a piece of information you have been given

Explanation:

e.g. they had pigtails in their long blonde hair.

from this we can infer that I am speaking about a girl

What mass of CO2 will be produced when 25.0 g of C8H18 react completely in the following equation? C8H18 + 25 O2 --> 16 CO2 + 18 H2O

Answers

The mass of [tex]CO_2[/tex] that will be produced when 25.0 g of [tex]C_8H_{18[/tex] reacts completely in the equation would be 154.035 g.

Stoichiometric problem

From the balanced equation of the reaction which goes thus:

[tex]C_8H_{18} + 25 O_2 -- > 16 CO_2 + 18 H_2O[/tex]

The mole ratio of [tex]C_8H_{18[/tex] that reacts and the [tex]CO_2[/tex] that is produced is 1:16.

Recall that: mole = mass/molar mass

The molar mass of [tex]C_8H_{18[/tex] is 114.23 g/mol

Mole of 25.0 g  [tex]C_8H_{18[/tex] = 25/114.23

                                     = 0.22 mol

Since the mole ratio is 1:16, the moles of [tex]CO_2[/tex] that will be produced by 0.22 mol of [tex]C_8H_{18[/tex] would be:

0.22 x 16 = 3.50 mol

The molar mass of [tex]CO_2[/tex] is 44.01 g/mol, thus, the mass of 3.50 mol of the gas can be determined as:

Mass = mole x molar mass

         = 3.5 x 44.01

         = 154.035 g

In other words, the mass of [tex]CO_2[/tex] that will be produced when 25.0 g of [tex]C_8H_{18[/tex] reacts completely in the equation would be 154.035 g.

More on stoichiometric problems can be found here: https://brainly.com/question/14465605

#SPJ1

By what factor would the average kinetic energy of the particles be increased if the
temperature a substance was increased from -49C to 287C?

Answers

Average kinetic energy is the average sum of all kinetic energy of all the molecules of gases. Therefore, the new kinetic energy is 48 times the original kinetic energy.

What is kinetic energy?

It is a energy which is possess  by a moving object. It is very difficult to find the correct value of kinetic energy so we find average kinetic energy. Which is very easy to calculate as compared to calculating kinetic energy

Average kinetic energy is directly proportional to temperature. It is not dependent on the type of gases or mass of gases

Mathematically,

K.E=2/3KT

Where,

K= Boltzmann constant

T is the temperature

Gases at higher temperature will have higher average kinetic energy. For every 10 degree rise in temperature, kinetic energy of reaction gets double. There are 24 times 10 between the given temperature  -49C to 287C. So, the new kinetic energy is 48 times the original kinetic energy.

Therefore, the new kinetic energy is 48 times the original kinetic energy.

Learn more about the average kinetic energy, here:

https://brainly.com/question/22174271

#SPJ1

How many nickel atoms would be presented in a 100.0 grams Ni sample

Answers

No. of moles of Ni = 1.7 mole

No of atoms of Ni = 1.023× 10²⁴ atom

What is Avogadro's No?

A mole is equivalent to 6.022 × 10²³ units of that material (such as atoms, molecules, or ions). Avogadro's number, or Avogadro's constant, is 6.022 × 10²³

For instance, a mole of carbon-12 atoms weighs 12 grammes. Additionally, a mole of hydrogen atoms weighs 1 gram, but a mole of hydrogen molecules weighs 2 gram.

Given that,

mass of nickel (m) =  100 gm

Now, no. of moles of Ni = mass / molar mass

                                        = 100 gm/ (59 gm/mole)

[ As we know, molar mass of Nickel (Ni) = 59 gm/mole ]

                                        = 1.7 mole

Now, no of atoms = no. of mole × Avogadro's No. ([tex]N_{A}[/tex])

                             = 1.7 mole × 6.022 × 10²³ atom/mole

                             = 10.23 × 10²³ atom

                             = 1.023× 10²⁴ atom

Thus, no. of moles of Ni = 1.7 mole

no. of atoms of Ni = 1.023× 10²⁴ atom

To know more about moles refer to:

https://brainly.com/question/15356425

#SPJ4

A sample of nitrogen dioxide gas occupies 625 cm3 at 70.0 °C and 15.0 psi. What is the final Celsius temperature if the volume is 545 cm3 at 15.0 psi?

Answers

The final temperature of the sample of nitrogen dioxide gas that occupies 625 cm³ at 70.0 °C and 15.0 psi is 299.12K.

How to calculate temperature?

The temperature of a gas can be calculated by using the combined gas law formula as follows:

P₁V₁/T₁ = P₂V₂/T₂

Where;

P₁ = initial pressureV₁ = initial volumeT₁ = initial temperatureP₂ = final pressureV₂ = final volumeT₂ = final temperature

According to this question, a sample of nitrogen dioxide gas occupies 625cm³ at 70.0 °C and 15.0 psi. The final temperature can be calculated as follows:

15 × 625/343 = 15 × 545/T

27.33T = 8175

T = 299.12K

Therefore, 299.12K is the final temperature of the sample of nitrogen dioxide gas.

Learn more about temperature at: https://brainly.com/question/18875024

#SPJ1

The following image shows a man running with a training parachute. The man is pushing himself forward with a force of 30 newtons. The net force on the man is 10 newtons forward. What is the parachute doing?

It is pushing the man forward with 10 newtons of force.

It is reducing the force by increasing the runner's mass.

It is making the runner travel at a constant speed.

It is pulling the man backward with 20 newtons of force.****

Answers

The net force on the man is 10 newtons forward. The parachute is pushing the man forward with 10 newtons of force. Therefore, option A is correct.

What is net force ?

The vector sum of the forces exerted on a particle or object is known as the net force. The original forces' impact on the motion of the particle is replaced by the net force, which is a single force.

In accordance with Newton's second rule of motion, it causes the particle to accelerate at a rate equal to the sum of all those actual forces.

The vector sum of all forces exerted on an object is known as the net force. The net force acting on an object is zero when it is in equilibrium, whether it is at rest or moving at a constant speed. Only when all of a vector's components are zero can a vector have a magnitude of zero.

Thus, option A is correct.

To learn more about the net force, follow the link;

https://brainly.com/question/18031889

#SPJ1

Answer: A

Explanation:

Which of the following is a reasonable electron configuration?
O1s²1p5
O1s²2s²2p8
O1s²2s²2d4
O1s²2s²2p6

Answers

Answer:

Explanation:The electronic configuration of Oxygen is 1 s 2 2 s 2 2 p 4 .

1s²2s²2p⁶ is a reasonable electron configuration. Therefore, the correct option is option D.

What is electron configuration?

The arrangement of an atom's or molecule's (or other physical structure's) electrons in their atomic or molecular orbitals is known as the electron configuration in atomic physics or quantum chemistry. For instance, the neon atom's electron configuration is 1s2 2s2 2p6, which means that 1, 2 and 6 electrons, respectively, are present in each of the 1s, 2s, and 2p subshells.

According to electronic configurations, each electron moves individually within an orbital while being surrounded by an average field produced by all other orbitals. Slater determinants and configuration state functions are used to mathematically describe configurations. 1s²2s²2p⁶ is a reasonable electron configuration.

Therefore, the correct option is option D.

To know more about electron configuration, here:

https://brainly.com/question/29757010

#SPJ5

Conservation of Mass

In the following reaction, H2 + F2 → 2HF, a student reacts 8g of H2 with 20g of F2. Assuming no mass is lost (due to the Law of Conservation of Mass), how many grams of HF is produced?

You can use the following Sentence Stem to formulate your answer.

Conservation of mass is mass _________ be _______ or _____________. In this reaction 8 _____ of ___________ + ____ grams of F2 produce ___ moles of ____________, the _____________. Since there is no _________ of ____________ due to the law of _________________ of ___________. There will be _____ grams of HF _______________.

Answers

The two main postulates that was given by Antoine Lavoisier are, oxygen play an important role in combustion and the other is mass of the reactant and product is conserved. Therefore the mass of HF is 28grams.

What is law of conservation of mass?

According to Law of conservation of mass, mass can neither be created nor be destroyed. Mass can only be transformed from one form to another. The law of conservation of mass was given by Antoine Lavoisier. Every reaction in nature follow the law given by Antoine Lavoisier that is mass is always conserved.

H[tex]_2[/tex] + F[tex]_2[/tex] → 2HF

Mass of  H[tex]_2[/tex]=8Grams

mass of F[tex]_2[/tex]= 20grams

According to law of conservation f mass

mass of H[tex]_2[/tex] + mass of F[tex]_2[/tex]   = mass of HF

Substituting all the given values, we get

8grams + 20grams =mass of HF

mass of HF=28grams

Therefore the mass of HF is 28grams.

To know more about law of conservation of mass, here:

https://brainly.com/question/28711001

#SPJ1

Which one is a spontaneous reaction?

Pd(s) + Be2+(aq) → Be(s) + Pd2+(aq)

3Sn(s) + 2Ga3+(aq) → 2Ga(s) + 3Sn2+(aq)

Be(s) + Sn2+(aq) → Sn(s) + Be2+(aq)

3Pd(s) +2Ga3+(aq) → 2Ga(s) + 3Pd2+(aq)

Answers

The  spontaneous reaction among the given reactions is :

Be(s) + Sn²⁺ (aq) ---> Sn(s) + Be²⁺ (aq); option C

What are spontaneous reactions?

Spontaneous reactions are reactions that can proceed on their own without the addition of energy from an external source.

The free energy change of spontaneous reactions must be less than zero.

This implies that the energy change in a spontaneous reaction favors the formation of products and the reaction will proceed to product formation without an external source of energy supply.

Considering the given reactions:

The reaction that will be spontaneous is one that favors product formation.

Berylium is more reactive than Tin, hence, the reation below is spontaneous.

Be(s) + Sn²⁺ (aq) ---> Sn(s) + Be²⁺ (aq)

Learn more about spontaneous reactions at: https://brainly.com/question/28536971

#SPJ1

In a triple bond, three pairs of electrons are shared between two atoms. Based on this information, draw the hydrogen atoms so that each carbon atom has four bonds. Then record the number of hydrogen atoms you drew using a text box.

Answers

sorry it's not clear anyway hope you can see the H and C .. the hydrogen atoms are 8

The combustion of propane may be described by the chemical equation C₂H₂(g) +50,( 3 CO₂(g) + 4H₂O(g) How many grams of O₂(g) are needed to completely burn 20.9 g T, H, (g)? mass O₂: go2​

Answers

so basically maybe you should

A package of M&M's was placed in a Calorimeter that had 200.0g of water at 35.00°C. The sample was then ignited to release its energy. The
temperature of the water increased to 550.0°C. Calculate the number of food Calories (Cal) that are in the package of M&M's. Round your Calories
according to sig fig rules

Answers

Here the substance is water. So, we need to know the value of specific heat capacity of water to solve this question.

The specific heat capacity of water is 4.18 J/g° C.

This is the heat required to increase the temperature by one degree Celsius. To increase the temperature by 20 degree C, the heat required will be 2 times of 4.18 J/g° C.

The heat required to raise the temperature of n grams of a substance by m0C will be,

Let us rewrite the equation as,

q = mc Δ t

Where q is the heat required, m is the mass of the substance, c is the specific heat capacity of the substance and Δ t is the temperature difference.

Given that,

m = 200g

Δ t = 55° C – 35° C = 20° C

c = 4.18 J/g° C

Let us substitute the values:

q = 200*4.18*20

Hence the heat required is 16720J.

Converting it to kJ, the heat required to raise the temperature of 200 grams of water from 55° C to 35° C is 167 KJ.

To learn more about Specific Heat,

https://brainly.com/question/29700572

#SPJ1

The number of food Calories (Cal) that are in the package of M&M's are

431000 Joules.

When we measure the temperature change of the calorimeter, we may use this equation to compute the heat released by a sample because the calorimeter is an instrument for which we are aware of (or can ascertain) its heat capacity.

When a liquid absorbs or loses energy, the temperature of the liquid varies.

In accordance with the formula

Q= mCΔT

m = 200g

ΔT = 550 - 35

ΔT = 515

C = 4.182 J/kg °C

Q is equal to 200 * 4182 * 515

Q = 430746 Joules.

Water has a 4,200 J/kg°C (joules per kilogram per degree Celsius) specific heat capacity. This indicates that 4,200 J are required to increase the temperature of 1 kilogram of water by 1°C.

To know more about Calorimeter, visit:

https://brainly.com/question/4802333

#SPJ1

The compound below can be prepared with an alkyl iodide and a suitable nucleophile. Identify the alkyl iodide and the nucleophile that you would use. For an anionic nucleophile, you do not need to draw the counterion.
The compound below can be prepared with an alkyl iodide and a suitable nucleophile. Identify the alkyl iodide and the nucleophile that you would use. For an anionic nucleophile, you do not need to draw the counterion.

Answers

Alcohol iodide nucleophile Is identified as  the alkyl iodide and the nucleophile that would be used.

What is nucleophile?

Nucleophile is defined as a chemical species that provides an electron pair to create a chemical bond in response to an action. A nucleophile typically has one electron pair and is negatively charged or neutral.

Alcohols with alkyl halides of hydrogen. Alcohols often undergo a nucleophilic substitution reaction to produce an alkyl halide and water when exposed to HBr or HCl. Alkanes and alcohols can be converted into alkyl halides through a nucleophilic substitution process.

Thus, alcohol iodide nucleophile Is identified as  the alkyl iodide and the nucleophile that would be used.

To learn more about nucleophile, refer to the link below:

https://brainly.com/question/28325919

#SPJ1

4. a type of civil engineering concerned with moving people and goods​

Answers

Transportation seems like the right answer

Please help, I’ll mark your answer as brainliest.

Answers

Answer:

Radon, Bismuth, Lead, and Thallium

Explanation:

Its from smallest to largest. Hope it helps!

If 0.050 mol hydrochloric acid (HCl) is mixed with 0.050 mol of sodium hydroxide (NaOH) in a "coffee cup" calorimeter, calculate the temperature change of 47.0 g of the resulting solution if the specific heat of the solution is 1.00 cal/g·°C and the quantity of heat released by the reaction is 8.8 × 102 cal.

Answers

The temperature change of the resulting solution, given that the soluton has a specific heat of 1 cal/g·°C is 18.7 °C

How do I determine the temperature change?

We know that heat released is related to change in temperature according to the following formula:

Q = MCΔT

Where

Q is heatM is the mass C is the specific heat capacityΔT is the temperature change

Using the above formula, the temperature change of the solution can be obtained as follow:

Mass of solution (M) = 47.0 gSpecific heat capacity of silver (C) = 1.00 Cal/g·°CHeat released (Q) = -8.8×10² CalTemperature change (ΔT) = ?

Q = MCΔT

-8.8×10² = 47 × 1 × ΔT

-8.8×10² = 47 × ΔT

Divide both side by 47

ΔT = -8.8×10² / 47

ΔT = -18.7 °C

Thus, the temperature change is 18.7 °C

Learn more about temperature change:

https://brainly.com/question/5449319

https://brainly.com/question/17036928

#SPJ1

There are a number of factors that alter the bioavailability of minerals from foods. Complete each sentence with either increases or decreases.
decreases increases
Phytic acid ______ the absorption of zinc from grains.
Oxalic acid _____ the absorption of calcium from spinach.
Refinement of grains _____ the mineral content of grain products.
Vitamin C _____ the absorption of iron from foods.
Vitamin D ____ the absorption of calcium from foods.

Answers

Each sentence about the bioavailability of minerals in foods should be completed with either increases or decreases as follows:

Phytic acid decreases the absorption of zinc from grains.Oxalic acid decreases the absorption of calcium from spinach.Refinement of grains decreases the mineral content of grain products.Vitamin C increases the absorption of iron from foods.Vitamin D increases the absorption of calcium from foods.

What are nutrients?

Nutrients can be defined as the chemical compounds (substances) or minerals that are present in food, and they are needed by the body of a living organism for healthy growth, reproduction, development, proper functioning, and reproduction.

What are the classes of nutrients?

In Science, there are five (5) main classes of nutrients and these include the following:

ProteinFatCarbohydrateVitaminsMinerals

In conclusion, phytic acid, oxalic acid, and refinement of grains are factors that decrease the bioavailability of minerals in foods while Vitamin C and Vitamin D increases the bioavailability of minerals in foods.

Read more on nutrients here: brainly.com/question/4413413

#SPJ1

Part A: Identify the oldest rock layer shown in the diagram. Be sure to explain your reasoning.

Part B: Scientists think that the trilobite fossil found only in layer d became extinct soon after layer d was formed. Using evidence from the cross-section, explain why this statement is true or not.

Answers

Answer: none

Explanation:none

Part 1: Name the type of chemical reaction that occurs when magnesium chloride solution (MgCl2) reacts with sodium carbonate solution (Na2CO3).

Part 2: Explain why aluminum (Al) would react with copper chloride (CuCl2) but not with magnesium chloride (MgCl2).

Answers

1. The name of the reaction is double displacement reaction

2. Aluminum (Al) will react with CuCl₂ but not with MgCl₂ because Mg is higher than Al in the electrochemical series

1. How do I know the type of reaction occurring?

To know the type of reaction occurring, we shall write the balanced equation for the reaction. Details below:

MgCl₂ + Na₂CO₃ -> 2NaCl + MgCO₃

From the balanced equation above, we can see clearly that there is an exchange of ions as Na and Mg exchanges and likes Cl₂ and CO₃.

Thus, we can conclude that the reaction is a double displacement reaction

2. Why will Al react with CuCl₂ but not with MgCl₂?

The reactivity of metals is controlled by their position in the electrochemical series.

Metals higher in the electrochemical series are more reactive and will displace the less reactive metals from solution.

The attached photo shows the electrochemical series of metals.

We can see that magnesium, Mg is higher than aluminum, Al in the electrochemical series and as such, Al can not displace Mg from solution.

Thus, we can conclude that Al can not react with MgCl₂ since Mg is higher than Al in electrochemical series.

Learn more about double displacement reaction:

https://brainly.com/question/13870042

#SPJ1

If the initial sample is 2.00 g, what mass of the original iridium‑192 remains after 5 days?

Answers

The mass of the original iridium192 remains after 5 days is 1.16 g.

What is mass?

Mass is defined as the body's resistance to acceleration when a net force is applied; a measure of inertia. Gravity and inertia, which are the two main forces influencing how objects move in space, make mass crucial.

Radioactive isotope iridium-192 (Ir-192) is iridium. It is a gamma emitter with a 74-day half-life. 1/4 of the sample will experience radioactive decay in 3.36 days. The substance's decay constant can be found. Subtract ln 2 from the substance's decay constant.

λ = ln2 / T 1/2

λ = ln2 / 5 1/2

λ = 1.16 g

Thus, the mass of the original iridium192 remains after 5 days is 1.16 g.

To learn more about mass, refer to the link below:

https://brainly.com/question/19694949

#SPJ1

Select the correct answer.
Which of the following locations is best suited for siting a concentrated solar power plant?

Answers

Variations in the solar resource are probably the first and main consideration. You can use local weather stations where available, otherwise satellite data (eg from NASA's website) or commercial databases such as Meteonorm. Also there is quite a comprehensive set of data files in the SAM software

Other important considerations are

local environment: plants and animals that could be affected by the system; community support and buy-in.wind, hail, rain, snow profile for the location in question. if there are high/tropical winds then it will increase the plant cost.flight paths and roads near the plant which could be affected by glint and glareproximity to a local town where staff will be able to live both during construction and later during operationproximity to a electricity transmission line with available capacityavailability of water for mirror cleaning and steam blowdown.cost (and availability) of electricity in the area. If remote, electricity/energy may be very expensive, which will enable a high price for electricity sold from the plant.quality of road to the plant, required to bring equipment and materials to sitepolitical stability of the region -- potential impact on perceived bankability of the project.

Many of these items will have a large influence on the cost of the plant and/or the revenue it will generate during its life. Others relate to environmental and risk factors and are also critically important to consider.

Hope this helps!!

How many moles of nitrogen gas would be produced if 7.75 moles of copper(I) oxide were reacted with excess ammonia in the following chemical reaction? 2 NHs (g) + 3 CuO (s) > 3 Cu(s) + Na(g) + 3 H20 (g)

Answers

Answer:

Explanation:

Dimensional analysis, using mole ratio from the balanced reaction: (7.63 mole CuO) * (1 mole N2 /3 mole CuO) = 2.54 mole N2

This hydrocarbon is incomplete. Draw the hydrogen atoms and the bonds connecting them to carbon atoms such that each carbon atom has four bonds. Then record the number of hydrogen atoms you drew using a text box.

Answers

Answer:

no. of H = 10

no. of C = 4

C4H10

Find the value of xx, yy, and zz, in the rhombus below. 40, x-5, 6y-2, 5z+5.

Answers

A rhombus is a quadrilateral with all the sides of equal measurements. Therefore, the value of x, y, and z are 45, 7, and 7, respectively.

What is a rhombus?

A rhombus is a quadrilateral with all the four sides having equal measurements. The opposite sides are parallel to each other which gives it the shape of a kite.

The value of x, y, and z can be calculated as all the sides have equal value.

x - 5 = 6y -2 = 5z + 5 = 40

Therefore, on solving each equation separately we get.

x - 5 = 40

x = 40 + 5

x = 45

6y - 2 = 40

6y = 40 + 2

6y = 42

y = 42/ 6

y = 7

5z + 5 = 40

5z = 40 - 5

5z = 35

z = 35/ 5

z = 7

Therefore, the values of x, y, and z are 45, 7, and 7, respectively.

Learn more about Rhombus here:

https://brainly.com/question/27870968

#SPJ1

whoever responds first will get brainliest :) Reactions must be balanced because of the conservation of matter, which means all of these EXCEPT which one (Which is WRONG about balancing)?


A. Atoms cannot be destroyed

B. New elements, but not new substances can form New substances

C. New substances, but not new elements can form

D.Atoms cannot be created

Answers

I believe the correct answer is B. Brainliest is appreciated I only need one more!!!!!!!!!!!!!
Other Questions
There are 2 types (or 2 ways to perform) of CPR. True False All of the following are examples of FP core privileges for care of infants and children, adolescents, and adults for most illnesses, disorders, and injuries EXCEPT:AdmissionDelivery of babiesDiagnosisTreatmentDelivery of babies What is the relationship between the relative size of an ion to its neutral atom. The region deep to the skin is the __________.a. hypodermisb. dermisc. epidermisd. stratum functionalis Living organisms can be classified as prokaryotes or eukaryotes. Which two structures are common to both prokaryotic and eukaryotic cells?. pls help! picture is below. pls help by pst sunday december 4 , 2022 12:00 p.m. in the proton-proton chain, the mass of four protons is slightly greater than the mass of a helium nucleus. explain what happens to this "lost" mass. an employee is angry with his boss and wants to sabotage the company. to accomplish this he secretly changes some of the values in his boss's copy of the quarterly report. his boss then reads this false data and makes decisions based on this fraudulent information. in this instance, what quality of information security has been damaged? a grating with 532 lines/mm is illuminated with light of wavelength 565 nm. what is the angular separation between the two lines formed in order m What is the first human to live Explain the difference between personal traits and interpersonal skills. the factors that account for an increase in the blood's oxygen-carrying capacity during altitude exposure are: hannah claims that -3 is not a rational number because it is not written as a ratio of integers. is she correct? explain why or why not Red-green color vision is a sex-linked recessive trait Gail (who is heterozygous for red-green color blindness) marries color-blind George If Gail and George have a baby girl, what is the chance that the baby will be color-blind? A. 0% B. 25% C. 50% D. 75% E. 100% Gail has an extra-marital affair with Greg, who has normal color vision. a ferris wheel starts from rest and builds up to a final angular speed of 1.9 rad/s while rotating through an angular displacement of 4.9 rad. what is its average angular acceleration? amp-pnp is a non-hydrolyzable analog of atp that can bind to proteins in a similar manner as atp but is no longer hydrolyzed. predict what would happen to helicase activity if amp-pnp were added to a dna replication reaction. how does sherlock holmes feel about dr.watson's efforts to solve the mystery of dr.mortimer's identity does government spending ever reduce private spending? part 2 a. yes, due to reduced interest rates. b. no, they are unrelated. c. yes, due to crowding out. d. no, due to crowding out. need help as quickly as possible when assessing a client with wrist restraints, the nurse observes that the fingers on the right hand are blue. what action should the nurse implement first?