I uploaded the answer to a file hosting. Here's link:
tinyurl.com/wpazsebu
Practice: A gas reaction is allowed to take place in a canister while submerged in water at a temperature of 25oC. The gas expands and does P-V work on the surroundings equal to 385 J. At the same time, the temperature of the water decreases to 20oC as the energy in the gas reaction reaches 364 J. What is the change in energy of the system
Answer:
change in energy of the system = - 21 J
Explanation:
Δu = q + w
q = 364 J
w = - 385
Temperature of system drops from 25°c to 20°c
hence
Δu ( change in energy ) = q - w
= 364 - 385
= -21 J
Heat transfer that occurs within or between solid objects is called
Answer:
conduction
Explanation:
The answer is Conduction
Ca3(PO4)2 + 3H2SO4 3CaSO4 + 2H3PO4.
What mass of concentrated H2SO4 (98% by mass) must be used to react completely
with 100.00 g of calcium phosphate?
100g
H2SO4 = 3x98x100/310 = 94.84g
used mass of h2so4x100/all mass of H2so4 = 98%
yx100/98=94.84x100/98 = 96.81.
Check the attached photo for clear answer.
What is the use of calcium phosphate?It may be used to treat conditions caused by low calcium levels such as bone loss (osteoporosis), weak bones (osteomalacia/rickets), decreased activity of the parathyroid gland (hypoparathyroidism), and certain muscle diseases (latent tetany).
Is calcium phosphate good for health?About Calcium Phosphate Supplements
It aids in healthy bone development and is crucial from infancy to adulthood. But, calcium does more than build strong bones. It's also very important for healthy digestion. Calcium aids in bile acid metabolism, excretion of fatty acids, and healthy gut microbiota.
Learn more about calcium phosphate at
https://brainly.com/question/10835189
#SPJ2
What is the function of white blood cells?
A) immunity
b) carry nutrients, waste
C) blood clotting
Answer:
A
Explanation:
They help fight infection and other disease
Answer:
immunity is the answer for this question
What happens to the pH when alkali is added to the distilled water?
Adding water to an acid or base will change its pH. ... The acid is becoming less acidic. Similarly, when an alkali is diluted with water the concentration of OH - ions decreases. This causes the pH of the alkali to fall towards 7, making the solution less alkaline as more water is added
Alkali is a chemical that is characterized by reacting with acids to produce salts. When alkali or base are added to the distilled water then pH increases.
What is pH?
The pH has been defined as the concentration of the hyronium or the hydrogen ions that releases when dissolved in water. The concentration of the hydroxide and the hydrogen are the determining factor of the acidic and basic nature.
The acids are characterized by the low pH (below 7) whereas, the basic compounds are characterized by the high pH (above 7). The pH scale is used to measure the pH of the solution.
When an alkali is added to the distilld water then hydroxide ions are relesed resulting in an increase in the basicity of the water sample. The pH range depends on the strong and weak base.
Therefore, the pH increases after ading alkaline solution.
Learn more about pH here:
https://brainly.com/question/8834103
#SPJ2
For a nucleus to go through mitosis,
A. it must start with two sets of chromosomes (diploid)
B. it must start with one set of chromosomes (haploid)
C. it can start with one set or two sets of chromosomes (haploid or diploid)
D. it can start with any number of chromosomes
Answer:
A
Explanation:
I had this in a test
At what temperature (in K) does NH₃ have a density of 0.812 g/L at 1.17 atm?
Answer:
The temperature is "298.51 K".
Explanation:
The given values are:
Density of ammonia,
d = 0.812 g/L
Pressure,
P = 1.17 atm
Mass:
M = [tex]NH_3[/tex]
= [tex]14+ 1\times 3[/tex]
= [tex]17[/tex]
As we know,
⇒ [tex]PV=nRT[/tex]
∴ [tex]T=\frac{PV}{nR}[/tex]
[tex]=\frac{PV}{\frac{W}{M}\times R }[/tex]
[tex]=\frac{PVM}{W\times R}[/tex]
By putting the value of "W", get
[tex]=\frac{PVM}{V\times d\times R}[/tex]
[tex]=\frac{P\times M}{d\times R}[/tex]
On substituting the values in the above equation, we get
[tex]=\frac{1.17\times 17}{0.812\times 0.08205}[/tex]
[tex]=\frac{19.89}{0.06699}[/tex]
[tex]=298.51 \ K[/tex]
Answer:
299
Explanation:
Or 298.51 to be exact!
What are the two products of an acid base neutralization reaction?
Answer:
Neutralization reactions occur when two reactants, an acid and a base, combine to form the products salt and water.
Explanation:
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
Answer: Water and NaCl is always formed
Explanation:
I hope this helped!
<!> Brainliest is appreciated! <!>
- Zack Slocum
*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆*――*☆**☆*――*☆*――*☆*――*☆
help with my science about the human body
Answer:
am sorry what exactly is your question?
If 4.0 g of helium gas occupies a volume of 22.4 L at 0 o C and a pressure of 1.0 atm, what volume does 3.0 g of He occupy under the same conditions?
Answer:
the volume occupied by 3.0 g of the gas is 16.8 L.
Explanation:
Given;
initial reacting mass of the helium gas, m₁ = 4.0 g
volume occupied by the helium gas, V = 22.4 L
pressure of the gas, P = 1 .0 atm
temperature of the gas, T = 0⁰C = 273 K
atomic mass of helium gas, M = 4.0 g/mol
initial number of moles of the gas is calculated as follows;
[tex]n_1 = \frac{m_1}{M} \\\\n_1 = \frac{4}{4} = 1[/tex]
The number of moles of the gas when the reacting mass is 3.0 g;
m₂ = 3.0 g
[tex]n_2 = \frac{m_2}{M} \\\\n_2 = \frac{3}{4} \\\\n_2 = 0.75 \ mol[/tex]
The volume of the gas at 0.75 mol is determined using ideal gas law;
PV = nRT
[tex]PV = nRT\\\\\frac{V}{n} = \frac{RT}{P} \\\\since, \ \frac{RT}{P} \ is \ constant,\ then;\\\frac{V_1}{n_1} = \frac{V_2}{n_2} \\\\V_2 = \frac{V_1n_2}{n_1} \\\\V_2 = \frac{22.4 \times 0.75}{1} \\\\V_2 = 16.8 \ L[/tex]
Therefore, the volume occupied by 3.0 g of the gas is 16.8 L.
The volume occupied by 3.0 g of He is mathematically given as
V2=16.8L
What volume does the 3.0 g of He occupy?Question Parameters:
If 4.0 g of helium gas occupies a volume of 22.4 L at 0 o C and a pressure of 1.0 atm, what volume does 3.0 g of H
Generally, the equation for the gas equation is mathematically given as
PV=nRT
When the reacting mass is 3g
n2=3/4
n2=0.75
Therefore
V1/n1=V2/n2
Where
n1=1
[tex]V2=\frac{22.4*0.75}{1}[/tex]
V2=16.8L
Read more about volume
https://brainly.com/question/1578538
Why does an asteroid get hotter when it goes close to the sun?
PCR amplification utilizes ________ template to produce a ________ product. For this question, select the answer that best describes the process as a whole: the nature of the template you used (the starting template added to the reaction) and the nature of the final product produced in your PCR analysis that you ran out on a gel will apply here.
Answer:
Double-stranded/Double-stranded
Explanation:
The PCR which is popularly known as polymerase chain reaction is the technique that uses the single copy of DNA to make thousands or levels a huge number(in terms of millions) of duplicates of that DNA.
The PCR is a laboratory procedure that is utilized to make various duplicates of a section of DNA as depicted previously. It is an unmistakable strategy.
There are 3 fundamental advances in PCR:
Denaturing
Annealing
Extending
In denaturing measure requires warming of the double-stranded DNA template to isolate it into a solitary strand. Eventually, it resulted into a double-stranded item.
Volume and moles are __________ related. This relationship can be calculated by using ___________ Law.
indirectly; Boyle’s
directly; Boyle’s
indirectly; Charles’
directly; Charles’
indirectly; Avogadro’s
directly; Avogadro’s
Answer:
The correct answer is - directly; Avogadro’s.
Explanation:
At the same temperature and pressure, gases of the same or equal volume have the same number of molecules. The relation between the moles of the gases and the volume of the gases are indirectly proportional to one another at the same temperature and pressure. This law is called Avogadro's law. In the case of an ideal gas of a particular mass has the volume and moles are directly proportional.
Thus, the correct answer is - directly; Avogadro’s.
The fizz in the soda that we drink is carbonic acid. Leaving the soda can open to the environment separates the carbonic acid into water and carbon dioxide. What type of reaction is this and what is the resulting product?
Answer:
The reactionnis known as a decomposition reaction
The equation of the reaction is given below as:
H₂CO₃ -----> H₂O + CO₂
Explanation:
A reaction in which a single compound is split into two or more simpler substances is known as a decomposition reaction.
In the reaction in which when a soda can is opened and left to the environment, the fizz in the soda, carbonic acid, separates into water and carbon dioxide is an example of a decomposition reaction.
The equation of the reaction is given below:
H₂CO₃ -----> H₂O + CO₂
In the reaction above, a larger molecular weight compound, carbonic acid with the molecular, H₂CO₃ is splits into two simpler substances of smaller molecular weight, water, H₂O and carbon dioxide, CO₂.
This reaction rate is made faster by an increase in temperature and by a decrease in pressure of the soda.
Heat flows from hotter objects to colder objects until it reaches a state where heat is no longer flowing.What have the objects reached when heat is not longer flowing?
Suppose you are titrating vinegar, which is an acetic acid solution of unknown strength, with a sodium hydroxide solution according to the equation H C 2 H 3 O 2 + N a O H ⟶ H 2 O + N a C 2 H 3 O 2 HCX2HX3OX2+NaOH⟶HX2O+NaCX2HX3OX2 If you require 33.98 mL of 0.1656 M N a O H NaOH solution to titrate 10.0 mL of H C 2 H 3 O 2 HCX2HX3OX2 solution, what is the molar concentration of acetic acid in the vinegar? Type answer:
Answer:
[tex]M_{acid}=0.563M[/tex]
Explanation:
Hello there!
In this case, given the neutralization of the acetic acid as a weak one with sodium hydroxide as a strong base, we can see how the moles of the both of them are the same at the equivalence point; thus, it is possible to write:
[tex]M_{acid}V_{acid}=M_{base}V_{base}[/tex]
Thus, we solve for the molarity of the acid to obtain:
[tex]M_{acid}=\frac{M_{base}V_{base}}{V_{acid}} \\\\ M_{acid}=\frac{33.98mL*0.1656M}{10.0mL}\\\\ M_{acid}=0.563M[/tex]
Regards!
The reason for the trend in the previous question is because Bromine is _________electron density from the carbon the proton is on, resulting in the proton being ___________, thus the proton nuclei is_________ effected by the applied magnetic field leading to a greater difference in energy of the nuclei's spin states.
Answer:
Explanation:
From this question, we are to fill in the blanks with the appropriate correct answers.
[tex]\text{The reason for the trend in the previous question is because Bromine is } \mathbf{withdrawing}[/tex][tex]\text{electron density from the carbon the proton is on, resulting in the proton being }\mathbf{deshielded, }[/tex][tex]\text{thus the proton nuclei is} \ \ \mathbf{more} \ \ \text{effected by the applied magnetic field leading to a }[/tex]
[tex]\text{greater difference in energy of the nuclei's spin states.}[/tex]
NOTE: that the electron-withdrawing groups decrease the electron density around the proton nucleus and therefore the nucleus feels the external magnetic field more. Hence, it requires a larger frequency to attain resonance(downfield).
1L = 1000 mL
Molarity (M) = moles of solute / L of solution
Calculate the moles of NaCl required to prepare 250 mL of 1.5 M aqueous solution.
Answer:· 44 g NaCl Explanation: The problem provides you with the molarity and volume of the target
Explanation:
How many calcium atoms are in 56.5 g of calcium?
Answer:
there are 8.501×10^23 atoms of Ca atoms
explain what you would do expect caesium astatide to look like .will it be soluble in water ?explain your reasoning
Answer:
it will not be soluble in water Becoz it can only be
separated by passing it through silver nitrate solution
Explanation:
i hope you understand
PLEASE HELP 30 POINTS PLS PLS
Express
as
ordinary numbers.
3 x 10^0=
Classify the following as either an element, compound, homogeneous mixture or
heterogeneous mixture:
milk
Answer:
HeterogeneousExplanation:
Milk seems to be homogeneous mixture but actually milk is a heterogeneous mixture and a colloid solution.how proved that carbon is present in sugar?
In all living organisms, in substances like carbohydrate, starch, urea etc. To prove sugar contains carbon, take a little amount of sugar in spoon and heat it gently till it melts and turned into yellowish color. On further heating it changes into brown colored mass and then black, which is charcoal.
Answer: sugar treated with strong sulphur acid turns to black
Explanation: sulphur acid removes water from sugars and carbon is left in residue.
This should not to try at home. Water boils when high temperature is achieved.
Also smell of burned sugar occurs
A change resulting in one or more new substances being formed is a?
A. nuclear reaction
B.physical property
C. chemical change
D.physical change
Answer:
C. Chemical change
Explanation:
A physical change is where something is changed but it doesnt affect the build up of the chemical. For example, if you broke sticks and threw them on the ground, that would be a physical change because the change is happening to the physical being of the object and not its chemical buildup. However, if you lit those sticks on fire, that would be considered a chemical change because you end up with two substances, ash and the remnants of the stick. A nuclear reaction would result in something blowing up so its not that. And a physical property is like what it looks like or how it smells. Hope I helped you!
How many moles of product are formed? Can someone help me ?
Answer:
It says right under here what to do
Explanation
Determine the moles of product produced by dividing the grams of product by the grams per mole of product. You now have calculated the number of moles of every compound used in this reaction. 41.304 g of NaCl ÷ 58.243 g/mol = 0.70917 moles of NaCl.
Calculate the [OH-] in a solution that has a pH of 3.08.
a. 1.2x10-9
b. 8.3x10-3
C. 1.2x10-11
d. 8.3x10-4
Answer:
C. 1.2 x 10^-11
Explanation:
pOH = 14 - pH = 14 - 3.08 = 10.92
[OH-] = 10^-pOH = 10^-10.92 = 1.2 x 10^-11
What is a hot spot? Must be in your own words ( please hurry)
Answer:
It depends. what hot spot are you looking for?
Answer:
A hot spot is an area on Earth over a mantle plume or an area under the rocky outer layer of Earth, called the crust, where magma is hotter than surrounding magma. The magma plume causes melting and thinning of the rocky crust and widespread volcanic activity.
Explanation:
Hope this is what you mean be hot spot!
I hope this helps you!
A chunk of zinc is added to a solution of gold (III) nitrate to extract the gold. The reaction forms,
zinc nitrate and the precipitate gold.
Explanation:
Gold (AU)................
Is water an element or compound
Answer:
Compound
Explanation:
H2O is made up of multiple types of atoms, which makes it a compound. It isn't an element because they only consist of one type of atom.