Explanation:
a) d[phi]/dt = (dB/dt)*Acos(0) = (-0.20)*(pi(2.25*10^-2)^2) = -3.98*10^-4 Wb
E = (1/2r*pi)*(d[phi]/dt) = -2.8*10^-3 N/C
b) Clockwise because The induced magnetic field will be in the direction to oppose the change. Since the magnetic flux from the magnets is decreasing, the induced magnetic field will be in the same direction as the magnet's field.
A child pulls on a wagon with a force of 75 N. If the wagon moves a total of 42 m in 3.1 min, what is the average power delivered by the child
Answer:
16.96 W
Explanation:
Power: This can be defined as the rate at which work is done by an object. The S.I unit of power is Watt(W).
From the question,
P = (F×d)/t....................... Equation 1
Where P = power, F = force, d = distance, t = time.
Given: F = 75 N, d = 42 m, t = 3.1 min = 3.1×60 = 186 s
Substitute these values into equation 1
P = (75×42)/186
P = 16.94 W
Hence the average power delivered by the child = 16.96 W
The average power delivered by the child is 16.96 W.
What is Power?Power can be defined as the rate at which work is done by an object. The S.I unit of power is Watt(W).
Work done is the product of force and displacement caused.
Then the formula of power will be
P = (F×d)/t
Substitute F = 75 N, d = 42 m, t = 3.1 min = 3.1×60 = 186 s, we get the power as
P = (75×42)/186
P = 16.94 W
Hence, the average power delivered by the child is 16.96 W.
Learn more about power.
https://brainly.com/question/15120631
#SPJ5
At a certain instant the current flowing through a 5.0-H inductor is 3.0 A. If the energy in the inductor at this instant is increasing at a rate of 3.0 J/s, how fast is the current changing
Answer:
The current is changing at the rate of 0.20 A/s
Explanation:
Given;
inductance of the inductor, L = 5.0-H
current in the inductor, I = 3.0 A
Energy stored in the inductor at the given instant, E = 3.0 J/s
The energy stored in inductor is given as;
E = ¹/₂LI²
E = ¹/₂(5)(3)²
E = 22.5 J/s
This energy is increased by 3.0 J/s
E = 22.5 J/s + 3.0 J/s = 25.5 J/s
Determine the new current at this given energy;
25.5 = ¹/₂LI²
25.5 = ¹/₂(5)(I²)
25.5 = 2.5I²
I² = 25.5 / 2.5
I² = 10.2
I = √10.2
I = 3.194 A/s
The rate at which the current is changing is the difference between the final current and the initial current in the inductor.
= 3.194 A/s - 3.0 A/s
= 0.194 A/s
≅0.20 A/s
Therefore, the current is changing at the rate of 0.20 A/s.
The rate at which the current is changing is;
di/dt = 0.2 A/s
We are given;
Inductance; L = 5 H
Current; I = 3 A
Rate of Increase of energy; dE/dt = 3 J/s
Now, the formula for energy stored in inductor is given as;
E = ¹/₂LI²
Since we are looking for rate at which current is changing, then we differentiate both sides of the energy equation to get;
dE/dt = LI (di/dt)
Plugging in the relevant values gives;
3 = (5 × 3)(di/dt)
di/dt = 3/(5 × 3)
di/dt = 0.2 A/s
Read more at; https://brainly.com/question/13112120
A small solid conductor with radius a is supported by insulating, nonmagnetic disks on the axis of a thin-walled tube with inner radius b. The inner andouter conductors carry equal currents i in oppositedirections.
Required:
a. Use Ampere's Law to find the magnetic field at any pointin the volume between the conductors.
b. Write the expression for the flux dΦB through anarrow strip of length l parallel to the axis , of width dr, at a distancer from the axis of the cableand lying in a plane containing the axis.
c. Integrate your expression from part B over the volumebetween the two conductors to find the total flux produced by acurrent i in the central conductor.
d. Use equation U=(1/2)LI2 to calculate the energy stored in the magnetic field for alength l of the cable.
Answer:
Pls see attached file
Explanation:
g If this combination of resistors were to be replaced by a single resistor with an equivalent resistance, what should that resistance be
In this circuit the resistance R1 is 3Ω, R2 is 7Ω, and R3 is 7Ω. If this combination of resistors were to be replaced by a single resistor with an equivalent resistance, what should that resistance be?
Answer:
9.1Ω
Explanation:
The circuit diagram has been attached to this response.
(i) From the diagram, resistors R1 and R2 are connected in parallel to each other. The reciprocal of their equivalent resistance, say Rₓ, is the sum of the reciprocals of the resistances of each of them. i.e
[tex]\frac{1}{R_X} = \frac{1}{R_1} + \frac{1}{R_2}[/tex]
=> [tex]R_{X} = \frac{R_1 * R_2}{R_1 + R_2}[/tex] ------------(i)
From the question;
R1 = 3Ω,
R2 = 7Ω
Substitute these values into equation (i) as follows;
[tex]R_{X} = \frac{3 * 7}{3 + 7}[/tex]
[tex]R_{X} = \frac{21}{10}[/tex]
[tex]R_{X} = 2.1[/tex]Ω
(ii) Now, since we have found the equivalent resistance (Rₓ) of R1 and R2, this resistance (Rₓ) is in series with the third resistor. i.e Rₓ and R3 are connected in series. This is shown in the second image attached to this response.
Because these resistors are connected in series, they can be replaced by a single resistor with an equivalent resistance R. Where R is the sum of the resistances of the two resistors: Rₓ and R3. i.e
R = Rₓ + R3
Rₓ = 2.1Ω
R3 = 7Ω
=> R = 2.1Ω + 7Ω = 9.1Ω
Therefore, the combination of the resistors R1, R2 and R3 can be replaced with a single resistor with an equivalent resistance of 9.1Ω
Rays that pass through a lens very close to the principle axis are more sharply focused than those that are very far from the axis. This spherical aberration helps us understand why:_______
Answer: it is easier to read in bright light than dim light.
Explanation:
The ray of light is the direction that is used by light in travelling through a medium. Rays that pass through a lens very close to the principle axis are more sharply focused than those that are very far from the axis.
Because of the fact that the rays are close to the principle axis, the spherical aberration helps us to understand the reason why it is easier for people to read in bright light than readin iin dim light.
In your own words, discuss how energy conservation applies to a pendulum. Where is the potential energy the most? Where is the potential energy the least? Where is kinetic energy the most? Where is kinetic energy the least?
Answer:
Explanation:
Energy conservation applies to the swinging of pendulum . When the bob is at one extreme , it is at some height from its lowest point . So it has some gravitational potential energy . At that time since it remains at rest its kinetic energy is zero or the least . As it goes down while swinging , its potential energy decreases and kinetic energy increases following conservation of mechanical energy . At the At the lowest point , its potential energy is least and kinetic energy is maximum .
In this way , there is conservation of mechanical energy .
1. Water flows through a hole in the bottom of a large, open tank with a speed of 8 m/s. Determine the depth of water in the tank. Viscous effects are negligible.
Answer:
3.26m
Explanation:
See attached file
Two unknown resistors are connected together. When they are connected in series their equivalent resistance is 15 Ω. When they are connected in parallel, their equivalent resistance is 3.3 Ω. What are the resistances of these resistors?
Explanation:
Let x and y are two unknown resistors. When they are connected in series their equivalent resistance is 15 Ω. When they are connected in parallel, their equivalent resistance is 3.3 Ω.
For series combination,
[tex]x+y=15[/tex] ......(1)
For parallel combination,
[tex]\dfrac{1}{x}+\dfrac{1}{y}=3.3[/tex] ....(2)
We need to find the resistances of these resistors. Solving equation (1) and (2) we get :
x = 0.29 and y = 14.7
Hence, the resistances of these resistors are 0.29 ohms and 14.7 ohms.
which of the following is a physical change?
A. a newspaper burns when placed in a fire.
B.an iron chair rusts when left outside
C.a sample of water boils and releases gas.
D.a plant changes carbon dioxide and water into sugar
Write a numerical expression for the emissive intensity (in W/m^2.sr) coming out of a tiny hole in an enclosure of surface temperature 1000K and emissivity 0.6:
Answer:
6.0 × [tex]10^{11}[/tex] W/[tex]m^{2}[/tex]
Explanation:
From Wien's displacement formula;
Q = e A[tex]T^{4}[/tex]
Where: Q is the quantity of heat transferred, e is the emissivity of the surface, A is the area, and T is the temperature.
The emissive intensity = [tex]\frac{Q}{A}[/tex] = e[tex]T^{4}[/tex]
Given from the question that: e = 0.6 and T = 1000K, thus;
emissive intensity = 0.6 × [tex](1000)^{4}[/tex]
= 0.6 × 1.0 × [tex]10^{12}[/tex]
= 6.0 × [tex]10^{11}[/tex] [tex]\frac{W}{m^{2} }[/tex]
Therefore, the emissive intensity coming out of the surface is 6.0 × [tex]10^{11}[/tex] W/[tex]m^{2}[/tex].
When you replace helium in a balloon with less-dense hydrogen, does the buoyant force on the balloon change if the balloon remains the same size?
Answer:
No change
Explanation:
First, we hare to understand what we mean by buoyant force.
Archimedes Principle states that
"the buoyant force on a submerged object is equal to the weight of the fluid that is displaced by the object."
Hot air balloons rise into the air as a result of the density of the air inside the balloon is less dense i.e warmer air than the air outside the balloon i.e cooler air. This is basically how the balloons work. Now applying this to our question
Replacing Helium with less dense Hydrogen will make no difference to the buoyant force because the volume of the balloon did not change. The buoyant force depends on the weight of the displaced air, and not on the force causing the displacement.
Your friend just challenged you to a race. You know in order to beat him, you must run 15 meters within 20 seconds in a northern direction. What does your average velocity need to be to win the race? .5 meters per second, north .75 meters per second, north 1.3 meters per second, north 300 meters per second, north
Asteroid A has 3.5 times the mass and 2.0 times the velocity of Asteroid B. If
Asteroid B has a kinetic energy of 2,300,000 J then what is the kinetic energy of
Asteroid A?
Answer:
K_A = 32.2 10⁶ J
Explanation:
In this exercise we must relate the quantities given to find the kinetic energy
Asteroid A data
m_A = 3.5 m_B
v_A = 2.0 v
they also give the value of the kinetic energy of asteroid A
K_B = 2.3 10⁶ J
the expression for scientific energy is
K = ½ m v²
let's replace
K_A = ½ m_a V_a2
K_A = ½ 3.5 m_B (2.0 v_B)^2
K_A = 3.5 2² (½ m_B v_B²)
K_A = 14 K_B
K_A = 32.2 10⁶ J
In your words, describe how momentum is related to energy.
Answer:
you need momentum in order to release energy. For example, if you need to push something heavy and you get a running head start, then it will be easier.
Explanation:
A block with a mass of 0.28 kg is attached to a horizontal spring. The block is pulled back from its equilibrium position until the spring exerts a force of 1.0 N on the block. When the block is released, it oscillates with a frequency of 1.2 Hz. How far was the block pulled back before being released?
Answer:
Explanation:
For spring
[tex]n=\sqrt{\frac{k}{m} }[/tex]
where n is frequency of oscillation and k is force constant and m is mass
Putting the values
[tex]1.2=\sqrt{\frac{k}{.28} }[/tex]
k = .4032 N/m
F= k x
where F is force , k is force constant and x is extension
Putting the given values
1 = .4032 x
x = 2.48 m
A person can survive a feet-first impact at a speed of about 12 m/s (27 mi/h) on concrete, 15 m/s (34 mi/h) on soil, and 34 m/s (76 mi/h) on water. What is the reason for the different values for different surfaces
Answer:
Different surfaces have different impact force during collision which depends on the time it takes the person to come to rest after collision.
Explanation:
Given;
speed on concrete = 12 m/s (27 mi/h)
speed on soil = 15 m/s (34 mi/h)
speed on water = 34 m/s (76 mi/h)
The impact force on this person during collision is rate of change of momentum;
[tex]F = \frac{\delta P}{\delta t}[/tex]
During collision, the force exerted on this person depends on how long the collision lasts; that is, how long it takes for this person to come to rest after collision with each of the surfaces.
The longer the time of collision, the smaller the force exerted by each.
It takes shorter time for the person to come to rest on concrete surface than on soil surface, also it takes shorter time for the person to come to rest on soil surface than on water surface.
As a result of the reason above, the force exerted on the person during collision by the concrete surface is greater than that of soil surface which is greater than that of water surface.
The intensity of sunlight at the Earth's distance from the Sun is 1370 W/m2. (a) Assume the Earth absorbs all the sunlight incident upon it. Find the total force the Sun exerts on the Earth due to radiation pressure. N (b) Explain how this force compares with the Sun's gravitational attraction.
Answer:
F= 3.56e22N
Explanation:
Using the force of radiation acting on the earth which is
force = radiation pressure x area = (intensity/c)xpi R^2
force = 1370W/m^2 x pi x( 6.37x10^6m)^2/3x10^8m/s
force = 5.82x10^8 N
But the sun's gravitational attraction means the magnitude of the solar gravitational force on earth: If that's the case, the answer is approx 10^22 N:
F=GMm/r^2
G=6.67x10^(-11)=6.67e-11
M=mass sun = 2x10^30kg=2e30
m=mass earth = 6x10^24kg
r=earth sun distance = 1.5x10^11m
F=(6.6e-11)(2e30)(6e24)/(1.5e11)^2 =
F= 3.56e22N
if the current in the circuit decreases, what does that mean about the rate at which the charge(and voltage) change in a capacitor?
2. the exponent of the exponential function contains RC for the given circuit. who's is a constant. use units R and C to find units of RC. write ohms in terms of volts and amps and write farads in terms of volts and coulombs. Simplify
units of RC are__________
Answer:
`1. charge Q, on the capacitor increases, while the current will decrease
2. τ = t = secs
Explanation:
1. consider RC of a circuit to be am external source
voltage across the circuit is given as
v =v₀(1 - [tex]e^{\frac{t}{τ} }[/tex])
where v = voltage
v₀ = peak voltage
t = time taken
τ= time constant
as the charge across the capacitor increases, current decreases
the charge across the circuit is given as
Q= Q₀(1 - [tex]e^{\frac{t}{τ} }[/tex])
charge Q is inversely proportional to the current I
hence the charge across the circuit increases
2. τ = RC
unit of time constant, τ,
= Ω × F
=[tex]\frac{V}{I}[/tex] ˣ [tex]\frac{C}{V}[/tex]
=[tex]\frac{C}{A}[/tex]
=[tex]\frac{C}{C/t}[/tex]
τ = t = secs
For the cellar of a new house, a hole is dug in the ground, with vertical sides going down 2.10 m. A concrete foundation wall is built all the way across the 8.90 m width of the excavation. This foundation wall is 0.189 m away from the front of the cellar hole. During a rainstorm, drainage from the street fills up the space in front of the concrete wall, but not the cellar behind the wall. The water does not soak into the clay soil. Find the force that the water causes on the foundation wall. For comparison, the weight of the water is given by 2.10 m ✕ 8.90 m ✕ 0.189 m ✕ 1000 kg/m3 ✕ 9.80 m/s2 = 34.6 kN.
Answer:
The force on the foundation wall is [tex]F_f = 191394 \ N[/tex]
Explanation:
From the question we are told that
The depth of the hole's vertical side is [tex]d = 2.10 \ m[/tex]
The width of the hole is [tex]b = 8.90 \ m[/tex]
The distance of the concrete wall from the front of the cellar is [tex]c = 0.189 \ m[/tex]
Generally the area which the water from the drainage covers is mathematically represented as
[tex]A = d * b[/tex]
substituting values
[tex]A = 2.10 * 8.90[/tex]
[tex]A = 18.69 \ m^2[/tex]
Now the gauge pressure exerted on the foundation wall is mathematically evaluated as
[tex]P_g = \rho * d_{avg} * g[/tex]
Here is the average height foundation wall where the pressure of the water is felt and it is evaluated as
[tex]d_{avg} = \frac{h_1 + h_2 }{2}[/tex]
where [tex]h_1[/tex] at the height at bottom of the hole which is equal to [tex]h_1 = 0[/tex]
and [tex]h_2[/tex] is the height at the top of the hole [tex]h_2 = d = 2.10[/tex]
[tex]d_{avg} = \frac{0 + 2.10 }{2}[/tex]
[tex]d_{avg} = 1.05[/tex]
Where [tex]\rho[/tex] is the density of water with constant value [tex]\rho = 1000 \ kg/m^3[/tex]
substituting values
[tex]P_g = 1000 * 1.05 * 9.8[/tex]
[tex]P_g = 10290 \ Pa[/tex]
Then the force exerted by the water on the foundation wall mathematically represented as
[tex]F_f = P_g * A[/tex]
substituting values
[tex]F_f = 10290 * 18.69[/tex]
[tex]F_f = 191394 \ N[/tex]
A generator rotates at 95 Hz in a magnetic field of 0.025 T. It has 550 turns and produces an rms voltage of 170 V and an rms current of 60.0 A.
Required:
a. What is the peak current produced?
b. What is the area of each turn of the coil?
Answer:
Peak current= 84.86 A
Area of each turn = 0.029 m^2
Explanation:
The peak value of current can be obtained from Irms= 0.707Io. Where Io is the peak current.
Hence;
Irms= 60.0A
Io= Irms/0.707
Io = 60.0/0.707
Io= 84.86 A
Vrms= 0.707Vo
Vo= Vrms/0.707= 170/0.707 = 240.45 V
From;
V0 = NABω
Where;
Vo= peak voltage
N= number of turns
B= magnetic field
A= area of each coil
ω= angular velocity
But ω= 2πf = 2×π×95= 596.9 rads-1
Substituting values;
A= Vo/NBω
A= 240.45/550×0.025×596.9
A= 0.029 m^2
Kevin is a black high school senior. While walking home from a sporting event at school, he sees a police car and decides to take another street to avoid it. He worries that the police will stop and question him even though he has not done anything wrong. Which theory explains this thought process? Dramaturgy Social construction of reality Social exchange theory Ethnomethodology
Answer:
Ethnomethodology theory
Explanation:
Take note of the fact that we are told Kevin worries that the police will stop and question him even though he has not done anything wrong.
This statement shows us that Kevin already understood his society from past experiences, and thus he tries to avoid social interactions with particular member of his society (the police) who may be show discrimination towards him.
An ideal air-filled parallel-plate capacitor has round plates and carries a fixed amount of equal butopposite charge on its plates. All the geometric parameters of the capacitor (plate diameter andplate separation) are now DOUBLED. If the original energy stored in the capacitor was U0, howmuch energy does it now store?
Answer:
U_f = (U_o)/2)
Explanation:
The capacitance of a given capacitor is given by the formula;
C = ε_o•A/d
While energy stored in plates capacitor is given as; U_o = Q²/2C
Now,we are told that that all the dimensions of the capacitor plate is doubled. Thus, we now have;
C' = ε_o•4A/2d
Hence, C' = 2C
so capacitance is now doubled
Thus, the final energy stored between the plates of capacitor is given as;
U_f = Q²/2C'
From earlier, we saw that C' = 2C.
Thus;
U_f = Q²/2(2C)
U_f = Q²/4C
Rearranging, we have;
U_f = (1/2)(Q²/2C)
From earlier, U_o = Q²/2C
Hence,
U_f = (1/2)(U_o)
Or
U_f = (U_o/2)
How do you stay hydrated during warm-up and scheduled activity?
Answer:
In order to stay hydrated during warm-up(s) drink 8oz of water 20-30 mintues before you start exercising or during your warm-up(s), make sure you drink 7 to 10 oz of water every 10 to 20 minutes during exercise, and drink 8oz of water no more than 30 minutes after you exercise.
In order to stay hydrated during scheduled activity(s) drink 17 to 20 oz of water 2 to 3 hours before you start to exercise, like said before drink 8 oz of water 20 to 30 minutes before you start exercising or during your warm-up(s), drink 7 to 10 oz of water every 10 to 20 minutes during exercise, also said before drink 8 ounces of water no more than 30 minutes after you exercise.
Answer: My scheduled activity was one hour of softball practice. I play catcher, so my thighs and knees take a lot of abuse from kneeling and standing. The lunges were excellent at preparing my thighs for softball. The high knees exercise and arm pumping didn’t feed into softball too well. I suppose that they might help me with base running.
Explanation: EDMENTUM
The resistance of a 0.29 m long piece of wire is measured to be 0.31 Ohms. The wire has a cross-sectional area of 0.003 m2. What is the resistivity of the wire?
Answer:
3.21×10⁻³ Ωm
Explanation:
Applying,
R = Lρ/A................... Equation 1
Where R = Resistance of the wire, L = Length of the wire, ρ = Resistivity of the wire, A = cross sectional area of the wire.
Make ρ the subject of the equation
ρ = RA/L................... Equation 2
Given: R = 0.31 Ohms, A = 0.003 m², L = 0.29 m
Substitute into equation 2.
ρ = 0.31(0.003)/0.29
ρ = 3.21×10⁻³ Ωm
A positively charged particle has a velocity in the negative z direction at point P. The magnetic force on the particle at this point is in the negative y direction. Which one of the following statements about the magnetic field at point P can be determined from this data?
A. Bx is positive.
B. Bz is positive.
C. By is negative.
D. By is positive.
E. Bx is negative.
Answer:
When reviewing the correct answer is A
Explanation:
The magnetic force is given by the expression
F = qv xB
where the bold letters indicate vectors, from this expression the module can be calculated
F = = q v b sin θ
the direction of the force is given by the rule of the right hand, for a positive charge the speed held by the thumb, the extended fingers point in the direction of the magnetic field and the palm points the direction of the force
in this case
the speed is in the negative part of the z axis
the force is in the negative direction of the axis and
consequently the magnetizing field is in the positive direction of the x axis
When reviewing the correct answer is A
A scientist is testing the seismometer in his lab and has created an apparatus that mimics the motion of the earthquake felt in part (a) by attaching the test mass to a spring. If the test mass weighs 13 N, what should be the spring constant of the spring the scientist use to simulate the relative motion of the test mass and the ground from part (a)?
Complete Question
The complete question is shown on the first uploaded image
Answer:
a
[tex]a_{max} = 0.00246 \ m/s^2[/tex]
b
[tex]k =722.2 \ N/m[/tex]
Explanation:
From the question we are told that
The amplitude is [tex]A = 1.8 \ cm = 0.018 \ m[/tex]
The period is [tex]T = 17 \ s[/tex]
The test weight is [tex]W = 13 \ N[/tex]
Generally the radial acceleration is mathematically represented as
[tex]a = w^2 r[/tex]
at maximum angular acceleration
[tex]r = A[/tex]
So
[tex]a_{max} = w^2 A[/tex]
Now [tex]w[/tex] is the angular velocity which is mathematically represented as
[tex]w = \frac{2 * \pi }{T}[/tex]
Therefore
[tex]a_{max} = [\frac{2 * \pi}{T} ]^2 * A[/tex]
substituting values
[tex]a_{max} = [\frac{2 * 3.142}{17} ]^2 * 0.018[/tex]
[tex]a_{max} = 0.00246 \ m/s^2[/tex]
Generally this test weight is mathematically represented as
[tex]W = k * A[/tex]
Where k is the spring constant
Therefore
[tex]k = \frac{W}{A}[/tex]
substituting values
[tex]k = \frac{13}{0.018}[/tex]
[tex]k =722.2 \ N/m[/tex]
A positively charged particle has a velocity in the negative z direction at a certain point P. The magnetic force on the particle at this point is in the negative y direction. Which one of the following statements about the magnetic field at point P can be determined from this data?
a. Bx is positive
b. Bz is positive
c. By is negative
d. By is positive
e. Bx is negative
Answer:
a. Bx is positive
Explanation:
See attached file
You are in the frozen food section of the grocery store and you notice that your hand gets cold when you place it on the glass windows of the display cases. Your friend says this is because coolness is transferred from the display case to your hand. What do you think?
Answer:
I think my friend got it all wrong, as coolness can not be transferred but heat was actually transferred between my hand and the glass windows
Explanation:
In thermodynamics, coolness can not be transferred, only heat can be transferred
Here is how the mechanism of why i felt cold works, my body gave out heat, hence there was heat transfer from a region of high to a low heat region, equilibrium was reached and I started feeling the coolness in my hands.
An automotive air conditioner produces a 1-kW cooling effect while consuming 0.75 kW of power. What is the rate at which heat is rejected from this air conditioner
Answer:
The rejected by the air conditioning system is 1.75 kilowatts.
Explanation:
A air conditioning system is a refrigeration cycle, whose receives heat from cold reservoir with the help of power input before releasing it to hot reservoir. The First Law of Thermodynamics describes the model:
[tex]\dot Q_{L} + \dot W - \dot Q_{H} = 0[/tex]
Where:
[tex]\dot Q_{L}[/tex] - Heat rate from cold reservoir, measured in kilowatts.
[tex]\dot Q_{H}[/tex] - Heat rate liberated to the hot reservoir, measured in kilowatts.
[tex]\dot W[/tex] - Power input, measured in kilowatts.
The heat rejected is now cleared:
[tex]\dot Q_{H} = \dot Q_{L} + \dot W[/tex]
If [tex]\dot Q_{L} = 1\,kW[/tex] and [tex]\dot W = 0.75\,kW[/tex], then:
[tex]\dot Q_{H} = 1\,kW + 0.75\,kW[/tex]
[tex]\dot Q_{H} = 1.75\,kW[/tex]
The rejected by the air conditioning system is 1.75 kilowatts.
Comparing helium atoms with nitrogen molecules at the same temperature, the helium atoms on average are moving _______ and have _______ kinetic energy.
Answer:
Helium atoms compared to nitrogen atoms are moving faster and have a greater kinetic energy.
Explanation:
The molecular velocity of a gas at room temperature is inverse proportional to the square root of its molecular mass.
The greater the molecular mass of the gas the lesser the average speed of its molecules. Comparing the molecular masses of nitrogen and helium, helium is found to have a lower molecular mass and a corresponding greater velocity.
Hence helium moves faster than nitrogen and has a higher kinetic energy than nitrogen