Answer:
5000 J
Explanation:
W=F*D
W=500N*10m
w=5000 J
When a man applies a force of 500 N to push a truck 10 m down the street. Then the work of 5000 J has been done.
What is Work ?Work done is the amount energy gained (loosed) in bringing the body from initial position to final position. It is denoted by W and its SI unit is joule(J). i.e. Work(W) is force(F) times displacement(s). W=F× s When a body is displaced with 1 newton of force by 1 m, then we can say that work has been done on the body by 1 joule.
Writing for it's dimension, W=F× s
Force has dimension [L¹ M¹ T²]
Displacement has dimension [L¹]
multiplying both the dimensions Force and Displacement we get, dimension of Work [L² M¹ T²].
Given,
F = 500 N
s = 10 m
Work = Fs = 500×10 = 5000 J
To know more about Work :
https://brainly.com/question/31428590
#SPJ3.
Calculate the wavelength of an orange light wave with a frequency of 5.085 x 10^14 Hz. The speed of light is 3.0 x 10^8 m/s.
^ meaning a power
Answer:
5.9 x 10⁻⁷m
Explanation:
Given parameters:
Frequency = 5.085 x 10¹⁴Hz
Speed of light = 3.0 x 10⁸m/s
Unknown:
Wavelength of the orange light = ?
Solution:
The wavelength can be derived using the expression below;
wavelength = [tex]\frac{v}{f}[/tex]
v is the speed of light
f is the frequency
wavelength = [tex]\frac{3 x 10^{8} }{5.085 x 10^{14} }[/tex] = 5.9 x 10⁻⁷m
help me please!!!!!!!!!!!!!!!
Answer:
10
Explanation:
would
Something that causes significant personal stress, appears strange to others,
and
is a psychologícal disorder.
O A. is a split from reality
OB. impairs one's ability to function
OC. includes hallucinations
OD. happens across cultures
Answer:
Impairs one's ability to function
Explanation:
Answer:
Impairs one's ability to functionExplanation:
I just took the test
What happens to thermal energy when Kinetic energy is Increased/Decreased?
Answer:If kinetic energy increases, so does the thermal energy, and vice versa.
Please brainliest!
Question 25 of 25 What is a limitation of modeling the effect of gravity on a falling object by using a ball dropped from different heights? A. Air slows down the fall of any object, including the ball. B. The weight of the ball can vary. C. Gravity varies slightly at different heights. D. The height that a ball bounces is affected by the height from which it was dropped.
Answer:
Air slows down The fall of any object including a ball.
A limitation of modeling the effect of gravity on a falling object by using a ball dropped from different heights is: gravity varies slightly at different heights. Hence, option (C) is correct.
What is gravity?Gravity is a fundamental interaction in physics that causes all objects with mass or energy to attract one another. The electromagnetic force is 10³⁶ times stronger than gravity the weak interaction is 10²⁹ times weaker than gravity, and gravity is by far the weakest of the four fundamental interactions.
As a result, it has no appreciable impact on subatomic particle level phenomena. However, at the macroscopic level, gravity is the most important interaction between things and governs the motion of planets, stars, galaxies, and even light.
As gravity is inversely proportional to the square of distance, it varies slightly at different heights. Hence, option (C) is correct.
Learn more about gravity here:
https://brainly.com/question/4014727
#SPJ2
What is the impact of age on flexibility? A. Younger people tend to develop flexibility more slowly. B. Younger people tend to be more flexible. C. Older people tend to be more flexible. D. Older people cannot maintain their flexibility.
Answer:
the answer is b
Explanation:
What part of an experiment contains the data tables and graphs
?
Answer: Review your data. ...
Calculate an average for the different trials of your experiment, if appropriate.
Make sure to clearly label all tables and graphs. ...
Place your independent variable on the x-axis of your graph and the dependent variable on the y-axis.
Hope this helps!!
How much work is needed to move an object 20 meters with 40 newtons of force?
a) 800 J
b) 850 N
c) 875 W
d) 825 m
Answer:
a) 800 J
Explanation:
Work is said to be done when a force induces movement over a distance in an object. The amount of work done (W) is calculated by multiplying the force by the distance traveled.
That is;
W = F × d
Where;
W = work done (J or N/m)
F = force (N)
d = distance (m)
In the information given in this question, F = 40N, d = 20m
Hence,
Work done = 40N × 20m
Work done = 800N/m or 800 J
A 75.0kg diver falls from a 3.00m board into the water. She goes 2.40m into the water before stopping. What is the average force the water exerted on the diver?
Answer:
The potential energy of the diver at the top is equal to the net work needed to be done to stop the diver.
PE = W
mg(h+d) = Fd
Explanation:
The velocity of a 48.0 g shell leaving a 2.95 kg rifle is 391. m/s. What is the recoil velocity of the rifle?
Hi there!
[tex]\large\boxed{ -6.36m/s}[/tex]
Use the equation:
[tex]v_{2} = -\frac{m_{1}}{m_{2}} v_{1}[/tex]
Where m2 and v2 deal with the larger object, and m1 and v1 with the smaller object. Plug in the given values:
v2 = ?
m1 = 0.048 kg (converted)
m2 = 2.95
v1 = 391
[tex]v_{2} = -\frac{0.048}{2.95} *391[/tex]
[tex]v_{2} = -6.36m/s[/tex]
Mathew throws a ball straight up in the air. it rises for a period of time and then begins to drop. At which points in the balls journey will be gravity be the greatest force acting on the ball
Answer: The greatest force of gravity on the ball will occur at the point when the ball is near to hit the ground ... hope this helps have a good day :P
can any one give me a amazon code i will repay you. plz i am trying to buy my mom somin off amazon
Answer:i have none but good luck also this is a learning site ;-;
Explanation:
A car weighing 12,000 N is parked on a 36° slope. The car starts to roll down the hill. What is the acceleration of the car?
Given that,
Weight of a car, W = 12,000 N
It is parked on a 36° slope.
To find,
The acceleration of the car.
Solution,
Let m be the mass of the car. Using formula for weight of an object.
W = mg
[tex]m=\dfrac{12000}{9.8}\\\\=1224.48\ kg[/tex]
Let a be the acceleration of the car. Using second law of motion as follows :
[tex]a=\dfrac{F_{\text{parallel}}}{m}\\\\=\dfrac{F\sin\theta}{m}\\\\=\dfrac{12000\times \sin(36)}{1224.48}\\\\=5.76\ m/s^2[/tex]
So, the acceleration of the car is [tex]5.76\ m/s^2[/tex].
interior crocodile alligator i drive a chevrolet movie theater
Answer:
nah bro tesla
Explanation:
Differentiate between
joule and watt
2. A person lifts 200kg seven times over the course of 11.8s. If they displaced the weight 2.2m up each time, how much power did the person deliver?
Answer:
The person delivered a power of 2,558 Watt
Explanation:
Work and Power
Mechanical work is the amount of energy transferred by a force. It's a scalar quantity, with SI units of joules.
Being the force vector and the displacement vector, the work is calculated as:
[tex]W=\vec F\cdot \vec s[/tex]
If both the force and displacement are parallel, then we can use the equivalent scalar formula:
W=F.s
Power is the amount of energy transferred per unit of time. In the SI, the unit of power is the watt, equivalent to one joule per second.
The power can be calculated as:
[tex]\displaystyle P=\frac {W}{t}[/tex]
Where W is the work and t is the time.
If the person lifts a mass of m=200 Kg, then exerts a force equal to its weight:
F = m.g = 200*9.8 = 1,960
F = 1,960 N
The work done when lifting the weight 7 times by a distance of s=2.2 m is:
W = 7*1,960*2.2=30,184
W = 30,184 J
Finally, the power delivered in t=11.8 seconds is:
[tex]\displaystyle P=\frac {30,184}{11.8}[/tex]
P = 2,558 Watt
The person delivered a power of 2,558 Watt
Will mark the brainliest
A nail of mass ,7.0g is held horizontally and is hit by a hammer of mass 0.25kg moving at 10ms −1. The hammer remains in contact with the nail during and after the blow.
If velocity of nail and hammer immediately after the blow is 9.7ms-1 Calculate the impulse transferred to the nail
Answer:
The impulse transferred to the nail is 0.01 kg*m/s.
Explanation:
The impulse (J) transferred to the nail can be found using the following equation:
[tex] J = \Delta p = p_{f} - p_{i} [/tex]
Where:
[tex]p_{f}[/tex]: is the final momentum
[tex]p_{i}[/tex]: is the initial momentum
The initial momentum is given by:
[tex] p_{i} = m_{1}v_{1_{i}} + m_{2}v_{2_{i}} [/tex]
Where 1 is for the hammer and 2 is for the nail.
Since the hammer is moving down (in the negative direction):
[tex]v_{1_{i}} = -10 m/s [/tex]
And because the nail is not moving:
[tex]v_{2_{i}}= 0[/tex]
[tex] p_{i} = m_{1}v_{1_{i}} = 0.25 kg*(-10 m/s) = -2.5 kg*m/s [/tex]
Now, the final momentum can be found taking into account that the hammer remains in contact with the nail during and after the blow:
[tex] p_{f} = m_{1}v_{1_{f}} + m_{2}v_{2_{f}} [/tex]
Since the hammer and the nail are moving in the negative direction:
[tex]v_{1_{f}}[/tex] = [tex]v_{2_{f}}[/tex] = -9.7 m/s
[tex] p_{f} = -9.7 m/s(7 \cdot 10^{-3} kg + 0.25 kg) = -2.49 kg*m/s [/tex]
Finally, the impulse is:
[tex] J = p_{f} - p_{i} = - 2.49 kg*m/s + 2.50 kg*m/s = 0.01 kg*m/s [/tex]
Therefore, the impulse transferred to the nail is 0.01 kg*m/s.
I hope it helps you!
WILL MARK BRAINLIEST ONCE I KNOW THE RIGHT ANSWER *(AFTER THE FULL TEST)*
Rules:
DO NOT SCAM
DO NOT ANSWER IF YOU DO NOT KNOW
COMMENT RESPECTFULLY
hello help me pls! i need serious help
Answer:c
Explanation:
Kiana is wearing a black shirt and shiny necklace. While she is outside at recess her shirt absorbs the light waves and gets very hot in the sun, but her necklace reflects the light waves and small circles of light are seen around the yard. What explains why the light waves behaved differently on her shirt than they did on her necklace?
Answer:
Black bodies are good absorber of light waves from the sun, while shining surfaces are good reflector of the light waves.
Explanation:
Generally, a black surface or material tends to absorb light waves while under the sun, while a shiny surface is a good reflector of the waves. This is because the black material is a good absorber, and also a good emitter.
The shiny necklace can only absorb little light waves from the sun, thus it reflects most of the light waves. The reflection is the reason for the small circles of light seen around the yard.
However, when in a cool environment the black shirt would cools faster (good emitter) than the shiny necklace.
Which statement correctly compares radio waves and microwaves?
A. Radio waves have shorter wavelengths and lower frequencies than microwaves.
B. Radio waves have longer wavelengths and higher frequencies than microwaves.
C. Radio waves have longer wavelengths and lower frequencies than microwaves.
D. Radio waves have shorter wavelengths and higher frequencies than microwaves.
Answer:
C. Radio waves have longer wavelengths and lower frequencies than microwaves.
Explanation:
Radio waves and microwaves are both electromagnetic waves. They do not require a medium for their propagation.
These waves are produced as result of the vibration between electric and magnetic fields perpendicular to one another.
On the electromagnetic spectrum, the waves are listed from left to rightAlong the spectrum, wavelength increases as frequency decreases. Energy also decreases to the right on the spectrum. Since microwaves comes before radio waves, they have shorter wavelength and higher frequency than micro waves.Conclusion When there is a constant unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will _____________________________. When there is an increasing unbalanced force applied in the same direction as the motion, speed will ___________________ and acceleration will ________________________. When there is a constant unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________. When there is an increasing unbalanced force applied in the opposite direction as the motion, speed will ___________________ and acceleration will ________________________.
Explanation:
When there is a constant unbalanced force applied in the same direction as the motion, speed will increase and acceleration will remain constant. When there is an increasing unbalanced force applied in the same direction as the motion, speed will increase and acceleration will increase.
According to newton's 2nd law
F = ma
F ∝ a
meaning when F increases , a increases and vice versa
If an object is not moving, the forces acting upon it are...
A.Balanced
B. Weak
C.Unbalanced
D.Hulk SMASH!
A hammer strikes a nail with a 8 N force for 0.018 seconds. Calculate the impulse of the hammer.
Answer:
0.144
Explanation:
Impulse is defined as force multiplied by time
please mark me brainliest
What provides The energy needed to fill the water cycle
Answer:
The water cycles energy source comes from the sun
Explanation:
The sun's solar energy helps evaporate water from several bodies of water which causes the process of transportation
Question 10 While looking in the yard, Jill noticed that the areas directly under the trees had less grass than the other areas in the yard. Which of the following is the BEST explanation for this observation? A The trees are blocking the sunlight. B The grass is receiving too much fertilizer. 2 C The areas under the trees are too cool for grass to grow. D The areas under the trees are receiving less water.
Answer:
The trees are blocking the sunlight.
Explanation:
B is obviously not the answer because fertilizer wouldn't have that effect. For C, shade doesn't change the temperature that much that it would inhibit plant growth. For D, even if the tree blocks the water, the surrounding ground will still be wet and therefore the grass should still have a sufficient amount of water to grow. Sunlight can't be gotten from somewhere else, unlike water, so this would inhibit plant growth.
Ou
A truck starts from rest and accelerates uniformly over a time of 5.5 seconds for a
distance of 130 m. Determine the acceleration (in m/s^2) of the truck.
Please submit your answer with 2 decimal places!
Answer:
8.6m/s²
Explanation:
Given parameters:
Initial velocity = 0m/s
Time = 5.5s
Distance = 130m
Unknown:
Acceleration = ?
Solution:
To solve this problem, we use one of the appropriate motion equations:
S = Ut + [tex]\frac{1}{2}[/tex] at²
S is the distance
U is the initial velocity
t is the time taken
a is the unknown acceleration
t is time taken
Since U = 0m/s
S = [tex]\frac{1}{2}[/tex] at²
130 = [tex]\frac{1}{2}[/tex] x a x 5.5²
130 = 15.13a
a = 8.6m/s²
which two statement descibe processes most likely to be involved in the formation of sedimentary rock?
Answer:
Erosion
Explanation:
Sedimentary rocks are created from the build up of sediments, such sediments can be found in stuff like soil, other rocks and many more. Erosion is involved in these type of rocks because the byproduct of erosion are sediments.
Answer:
Rivers... and Windstorms....
Explanation:
I just did it a p e x
When you slide a box across the floor what force must you push to be stronger than
A) support force
B) friction force
C) gravity
D) air resistance
Answer:
B) Friction force
Explanation:
if the object is heavy then it will need more force to move it unlike a tennis ball for example.
Two carts connected by a 0.25 m spring hit a wall, compressing the spring to 0.1 m. The spring constant k is 100 N m . What is the elastic potential energy stored from the spring's compression?
Given that,
Initial position of the spring, x₁ = 0.25 m
Final position of the spring, x₂ = 0.1 m
The spring constant of the spring, k = 100 N/m
To find,
The elastic potential energy stored from the spring's compression.
Solution,
The work done in moving a spring from on position to another is stored in the form of elastic potential energy. It can be given as follows :
[tex]E=\dfrac{1}{2}k(x_2^2-x_1^2)\\\\=\dfrac{1}{2}\times 100\times (0.1^2-0.25^2)\\\\=2.62\ J[/tex]
So, the required energy is 2.62 J.
Answer:
1.125 J
Explanation:
The correct answer is 1.125 J