Answer:
Yes, it will float.
Explanation:
It is given that,
A liquid has a density of 0.85 g/cm³.
We know that, the density of water is 1 g/cm³.
The density of the liquid is less than that of water. If the density of the liquid is less than that of water, it will float in it. Hence, if you pour some of the liquid into a glass of water, it will float.
Why can't 41 be represented in a binary table?
Answer:
I think it is but I don't know for sure
Explanation:
41 101001
41 is 101001 on the binary table i think
D. Ampere
A screw of length 5 cm enters totally into a wooden block after 25 turns. What is the pitch of the
screw?
A. 0.1 cm
B. 0.2 cm
C. 0.4 cm
D. 0.5 cm
Answer:
0.5
Explanation:
u must simplyfiy
LOGARITHMIC functions have 2 asymptotes
True
False
Answer:
true
Explanation:
true
A 10 N force and an 18 N force act in the same direction on an object. What is the net force on the object?
Answer:
28 N
Explanation:
From the question given above, we were told that 10 N force and 18 N force act in the same direction on the object.
The net force acting on the object can be obtained by simply adding both forces together since they both act on the object in the same direction. This is illustrated below:
Force 1 (F₁) = 10 N
Force 2 (F₂) = 18 N
Net force (Fₙ) =?
Fₙ = F₁ + F₂ (since they both act in the same direction)
Fₙ = 10 + 18
Fₙ = 28 N
Therefore, the net force acting on the object is 28 N.
N January the company produced 3,470 units using 13,880 pounds of the direct material and 2,896 direct labor-hours. During the month, the company purchased 16,900 pounds of the direct material at a cost of $14,640. The actual direct labor cost was $103,840 and the actual variable overhead cost was $47,220. The company applies variable overhead on the basis of direct labor-hours. The direct materials purchases variance is computed when the materials are purchased. The labor rate variance for January is:
Answer:
the labor rate variance is $416 favorable
Explanation:
The computation of the labor rate variance is shown below:
But before that actual labor rate is
The Actual labor rate is
= Actual direct labor cost ÷ Actual labor hours
= $103,840 ÷ 2,896
= $35.856354
Now
labor rate variance is
= (Standard rate - Actual rate) × Actual Hours
= ($36 - $35.856354) × 2,896
= $416 Favorable
Hence, the labor rate variance is $416 favorable
I’ll give BRAINLIEST to the person that answer this questions (and if they right) :
People who are REACTIVE are like _____ , and PROACTIVE people are like ____.
A. A bottle of water and a bottle of soda
B.A bottle of soda and a bottle of water
C.None of the above
D.All of the above
PROACTIVE people make their choices based on ____.
A.Reasoning
B.Anger
C.Feelings
D.what others say
What is the opposite of being REACTIVE?
A.Being proactive
B.Being inactive
C.Being semi-active
D.All of above
Habit 1:Be proactive means:
A.thinking everyone can win
B.Take responsibility for your own life
C.Become a professional athlete
D.Doing something right away
1: C
2: C
3: A
4: B
there you go
What do we know about the relative strength of the electric field around each object?
Answer:
A charged object in an electric field experiences a force due to the field. The electric field strength, E, at a point in the field is defined as the force per unit charge on a positive test charge placed at that point.
Explanation:
What type of force is magnetic force? *
Strong Nuclear force
Non-contact force
Contact force. Weak Nuclear force
Answer:
non contant force
Explanation:
bcoz they push or pull on object without touching them
Answer:
energy
Explanation:
1. Four identical elephants are at different heights. If your physics teacher
asked you which of the following elephants has the greatest amount of
potential energy, what will be your answer? And why?
Helpppp:(((((
PLS I NEED HELP ASAAP
Answer:
Option A
Explanation:
The Equation represents the displacement of the object which is represented by x
[tex]x=t-t^2[/tex]
so, [tex]x_0[/tex] means when time is zero so we replace t with zero in the equation,
[tex]x_0=(0)-(0)^2\\x_0=0[/tex]
now for v which is velocity we need to differentiate the function as the formula for velocity is rate of change of displacement over time so we derivate the equation once and get,
[tex]v=1-2t\\[/tex]
now for [tex]v_0[/tex] we insert t = 0 and get
[tex]v_0=1-2(0)\\v_0=1[/tex]
now for a which is acceleration the formula of acceleration is rate of change of velocity over time, so we differentiate the the equation of v(velocity) once or the equation of x(displacement) twice so now we get,
[tex]a=-2[/tex]
so Option A is your answer.
Remember derivative of a constant is always zero because a constant value has no rate of change has its a constant hence the derivative is 0
If a wave has a velocity of 100m/s and a wavelength of 10m, what is the frequency?
!!!!!!!!!!!!!!!!!!PLEASE HELP QUICK 30 BRAINLY POINTS!!!!!!!!!!!!!!
A two-stage rocket accelerates from rest at +3.57 m/s/s for 6.82 seconds. It then
accelerates at +2.98 m/s/s for another 5.90 seconds. After the second stage, it enters
into a state of free fall. Determine:
a. the maximum speed
b. the maximum altitude
c. the height of the rocket after 20.0 seconds
d. the total time the rocket is in the air (assuming it is launched from the ground)
!!!!!!!!!!!!!!!!!!PLEASE HELP QUICK 30 BRAINLY POINTS!!!!!!!!!!!!!!
Answer:
i need points
Explanation:
i need points
Answer:
this is old so-
Explanation:
i’ll literally venmo you if you answer this with FULL EXPLANATION so i can understand please !
Answer:
The speed with which the man flies after hitting the rock is 5.5 m/s
Explanation:
The given parameters are;
The mass of the man, m₁ = 100 kg
The mass of the scooter, m₂ = 10 kg
The initial speed of the man and the scooter, v₁ = 5 m/s
The speed with which the man flies after hitting the rock = v₂
The final speed of the scooter, v₃ = 0 m/s
The momentum = Mass × Velocity and by the principle of conservation of momentum, we have;
The total initial momentum = The total final momentum
The total initial momentum = (m₁ + m₂) × v₁ = (100 + 10) × 5 = 550
The total initial momentum = 550 kg·m/s
The total final momentum = m₁ × v₂ + m₂ × v₃, which gives;
The total final momentum = 100 × v₂ + 10 × 0
By conservation of momentum, the total initial momentum = The total final momentum, we get;
550 = 100 × v₂ + 10 × 0
∴ 550 = 100 × v₂
v₂ = 550 kg·m/s/(100 kg) = 5.5 m/s
The speed with which the man flies after hitting the rock = v₂ = 5.5 m/s
41. What effects the efficiency of a pulley?
a. the type of rope or cable
b. the way the wheel turns
c. the length of the rope
d. how big the wheel is
e. only a and be
f. all of the above
Answer:
e. only a and b
Deaths due to lifestyle diseases have declined since the early 1900s.
T
F
Answer:
FalseExplanation:
Hope this helps! Please consider marking brainliest! Always remember, your smart and you got this! -Alycia :)
a 50.0kg skydiver experience a 740newton air resistance force determine her acceleration please help asap
Answer:
a = - 5 [m/s²].
Explanation:
To solve this problem we must use Newton's second law, which tells us that the sum of forces on a body is equal to the product of mass by acceleration.
∑F = m*a
where:
F = resultant force [N] (units of Newtons)
m = mass = 50 [kg]
a = acceleration = 9.81 [m/s²]
For this particular problem, the only forces acting are the force of gravity acting down with negative sign, while the force of air opposes the fall, in this way it is positive.
[tex]f_{air}-F_{grav}=-m*a[/tex]
As the movement is pointing down the acceleration will be taken as negative.
[tex]740-(50*9.81)=-50*a\\740-490.5 = -50*a\\249.5 = -50*a\\a = - 5 [m/s^{2} ][/tex]
We should note that in this case, the acceleration has a negative sign, this means that the force of the air makes the skydiver move upwards
A supply plane drops a package to the ground for stranded campers below. After falling for 8.14 seconds, the package will have a downward velocity of 80.79 m/s. How high was the plane when it dropped the package?
Answer:
333 m
Explanation:
The following data were obtained from the question:
Initial velocity (u) = 0 m/s.
Time (t) = 8.14 s.
Final velocity (v) = 80.79 m/s.
Acceleration due to gravity (g) = 9.8 m/s²
Height (h) =?
v² = u² + 2gh
80.79² = 0 + (2 × 9.8 × h)
6527.0241 = 0 + 19.6h
6527.0241 = 19.6h
Divide both side by 19.6
h = 6527.0241 / 19.6
h = 333 m
Thus, the plane was at a height of 333 m when the package was dropped.
A soccer player kicks a ball 6.5 meters. How much time is needed for the ball to travel this distance if its velocity is 22 meters per second?
. . .
. . .
. . .
!
.
Your answer is 0.30 seconds
why are incandescent lights fo inefficient?
Answer:
Explanation:
Incandescent bulbs are extremely inefficient because 90% of the energy is wasted as heat, with only 10% being converted to visible light. This gives incandescent bulbs a luminous efficiency rating of around 2%. Ultimately, incandescent bulbs perform better as heaters than as light sources.
Plz di all plz i will give brainest and thanks to best answer do it right
Answer:
B
hdhdududydysgd
hdhdgdtdtdt
gsgdgdggd
Explanation:
I TIHNK IS THE ANSWER
Answer:
C
Explanation:
Wave length is - - - - >
Bsjejwakknsbsbehebebbdbdbs
A 20 kg mass is hanging on one side of a pulley and a 5 kg mass is hanging on the other. Determine the acceleration of each mass.
Answer:
i believe it's 7
Explanation:
1) TRUE/FALSE, an example of a quantitative observation is “That is a red doll.”
2) TRUE/FALSE, Potential energy is strongest at the top of a hill.
3) F= ?, m= 18 kg, a= 2 m/s2
help me pweeeees
Answer:
1) False
2) True
3) 36N
Explanation:
1) Quantitative observation is related to number of objects . But in that example , there isn't any number.
2) Potential energy depends on height. So potential energy increases when height increases.
3) F = m×a
In the question , m = 18 kg ; a = 2m/s^2
So, F = 18×2 = 36N
What two things does force depend on
Answer:
When dealing with the force of gravity between two objects, there are only two things that are important – mass, and distance or (acceleration)
Explanation:
In interactions of action-reaction pairs involving Earth and everyday objects, the effect on Earth's motion is often negligible because
Answer:
...The earth has a great mass. Since mass and inertia are directly proportional to each other, the larger the mass of the object, the more inertia that it has. Inertia is the objects resistance to a change in motion.
Explanation:
These the flow of electrons (the current) and where some of the electrons' energy gets converted into heat. (Lessons 5.01-5.03) electric currents Insulators Resistors Conductors
Answer: The answer is resistors
Explanation: I just took the unit test and it was correct
A rock is dropped into a canyon that is 0.3 km deep. Determine the time it takes the rock to hit the bottom of the canyon?
Answer:
rock of mass m is dropped to the ground from a height h. A second rock, with mass 2m, is dropped from the same height. When the second rock strikes the ground, what is its kinetic energy? (a) Twice that of the first rock, (b) four times that of the first rock, (c) same as that of the first rock, (d) half as much as that of the first rock, (e) impossible to determine.
If a rock is dropped into a canyon that is 0.3 km deep, then the time taken by the rock to hit the bottom of the canyon would be 7.82 seconds.
What are the three equations of motion?There are three equations of motion given by Newton
v = u + at
S = ut + 1/2 × a × t²
v² - u² = 2 × a × s
Keep in mind that these calculations only apply to uniform acceleration.
As given in the problem, if a rock is dropped into a canyon that is 0.3 km deep.
By using the second equation of motion given by Newton,
S = ut + 1/2at²
300 = 0 + 0.5 × 9.8 × t²
t² = 300 / 4.9
t = 7.82 seconds
Thus, the time taken by the rock to hit the bottom of the canyon would be 7.82 seconds.
To learn more about equations of motion here, refer to the link given below ;
brainly.com/question/5955789
#SPJ2
This equation shows the reaction that occurs when charcoal burns. What type
of reaction is it?
Explanation:
Exothermic
Because here Energy is released.
Answer:
c
Explanation:
A fireboat is to fight fires at coastal areas by drawing seawater with a density of 1030 kg/m3 through a 10-cm-diameter pipe at a rate of 0.04 m3/s and discharging it through a hose nozzle with an exit diameter of 5 cm. The total irreversible head loss of the system is 3 m, and the position of the nozzle is 3 m above sea level. For a pump efficiency of 70 percent, determine the required shaft power input to the pump and the water discharge velocity.
Answer:
50.93 m/s
199.5 kW
Explanation:
From the question, the nozzle exit diameter = 5 cm, Radius= diameter/2= 5cm/2= 2.5cm. we can convert it to metre for unit consistency= (2.5×0.01)=
0.025m
We can calculate the The cross sectional area of the nozzle as
A= πr^2
A= π ×0.025^2
= 1.9635 ×10^- ³ m²
From the question, the water is moving through the pipe at a rate of 0.1 m /s , then for the water to move through it at a seconds, it must move at
(0.1 / 1.9635 ×10^- ³ m²)
= 50.93 m/s
During the Operation of the pump, the Dynamic energy of the water= potential energy provided there is no loss during the Operation
mgh = 1/2mv²
We can make "h" subject of the formula, which is the height of required head of water
h = (1/2mv²)/mg
h= v² / 2g
h = 50.93² / (2 ×9.81)
h = 132.21m
From the question;
The total irreversible head loss of the system = 3 m,
the given position of nozzle = 3 m
the total head the pump needed=(The total irreversible head loss of the system + the position of the nozzle + required head of water )
=(3 + 3 + 132.21m)
=138.21m
mass of water pumped in a seconds can be calculated since we know that mass is a product of volume and density
Volume= 0.1m³
Density of sea water=1030 kg/m
(0.1 m^3× 1030)
= 103kg
We can calculate the Potential enegry, which is = mgh
= (103 ×9.81 × 138.21)
= 139651.5 Watts
= 139.65kW
To determine required shaft power input to the pump and the water discharge velocity
Energy= efficiency × power
But we are given efficiency of 70 percent, then
139651.5 Watts = 0.7P
=199502.18 Watts
P=199.5 kW
Therefore, the required shaft power input to the pump and the water discharge velocity is 199.5 kW
Particles in which state of matter are the most likely to interact with each other to cause a chemical reaction?
Which of the following best describes refraction?
Answer:
The medium sound waves
Explanation:
change in the direction of a wave passing from one medium to another.