A jogger runs 4 km in 0.4 hr, then 8 km in 0.8 hr. What is the average speed of the jogger?

Answers

Answer 1

The jogger would have ran about 10 km/h.


Related Questions

Which of the following is how the substance in a longitudinal wave flows?

A. Up and Down

B. At Random

C. Perpendicular to the direction of the wave

D. In the direction of the wave

Please help I need this turned in tonight.

Answers

Answer:

The answer is D. In the direction of the wave

Explanation:

I took the test, hope this helps! :)

Bicyclist travels at an average velocity of 11.2 km/h [W]. How far will the bicyclist travel in 175 minutes?

Answers

Answer:

32.67km

Explanation:

~= round off

11.2km/h~3.11m/s

175minutes=10500s

10500*3.11~32, 666.67m

=32.66667km

~ 32.67km

Which factors affect the rate of deposition? Check all that apply.
color of the sediment
density of the sediment
size of the sediment
texture of the sediment
velocity of the agent of erosion

Answers

Answer:

density of the sediment, size of the sediment, and velocity of the agent of erosion.

Explanation:

Have a nice day!

Answer: b., c., e.

Explanation:

Which action would decrease the strength of attraction between a magnet and an iron object
A. Moving the magnet farther away from the iron object
B. Moving the iron object closer to the magnet
C. Decreasing the number of electrons on the magnet
D. Increasing the number of electrons on the magnet

Answers

Answer:

a. moving the magnet farther away and an iron object.

Explanation:

Answer:A

Explanation:

A p e x


Which of the following is NOT a correct statement?*
As the volume of a contained gas increases, the pressure in the container will
decrease.
As the temperature decreases, the kinetic energy of the particles decreases.
As pressure increases with a constant temperature, the volume decreases.
O As temperature increases, the kinetic energy of the particles decreases.

Answers

AnswerAmontons's law. If the temperature is increased, the average speed and kinetic energy of the gas molecules increase. ... If the gas volume is decreased, the container wall area decreases and the molecule-wall collision frequency increases, both of which increase the pressure exerted by the gas (Figure 1).:

Explanation:

A steam catapult applies a very large force to supplement the engine thrust of a jet fighter as it takes off from an
aircraft carrier. The jet has a mass of 4000 kg and must reach its take off speed of 70 m/s at the end of the 220
m flight deck. What is the combined force of the catapult and engines? (Use the work-energy theorem)

Answers

Answer:

The combined force of the catapult and engines is 44545.455 newtons.

Explanation:

Let suppose that platform of the aircraft carrier is horizontal, such that changes in gravitational potential energy can be neglected. In addition, effects of non-conservative forces are neglected. By using Principle of Energy Conservation and Work-Energy Theorem we find that steam catapult-jet aircraft is represented by:

[tex]K_{1}+W_{1\rightarrow 2} = K_{2}[/tex] (1)

Where:

[tex]K_{1}[/tex], [tex]K_{2}[/tex] - Initial and final translational kinetic energies of the jet fighter, measured in joules.

[tex]W_{1\rightarrow 2}[/tex] - Work done on the jet fighter due to the combined force of the catapult and engines, measured in joules.

By applying definitions of translational kinetic energy and work, we expand and simplify the equation above as follows:

[tex]F\cdot \Delta s = \frac{1}{2}\cdot m\cdot (v_{2}^{2}-v_{1}^{2})[/tex]

[tex]F = \frac{m\cdot (v_{2}^{2}-v_{1}^{2})}{2\cdot \Delta s}[/tex] (2)

Where:

[tex]F[/tex] - Combined force of the catapult and engines, measured in newtons.

[tex]m[/tex] - Mass of the jet fighter, measured in kilograms.

[tex]\Delta s[/tex] - Length of the catapult, measured in meters.

[tex]v_{1}[/tex], [tex]v_{2}[/tex] - Initial and final speeds of the jet aircraft, measured in meters per second.

If we know that [tex]m = 4000\,kg[/tex], [tex]v_{1} = 0\,\frac{m}{s}[/tex], [tex]v_{2} = 70\,\frac{m}{s}[/tex] and [tex]\Delta s = 220\,m[/tex], then the combined force of the catapult and engines is:

[tex]F = \frac{(4000\,kg)\cdot \left[\left(70\,\frac{m}{s} \right)^{2}-\left(0\,\frac{m}{s} \right)^{2}\right]}{2\cdot (220\,m)}[/tex]

[tex]F = 44545.455\,N[/tex]

The combined force of the catapult and engines is 44545.455 newtons.

The combined force of the catapult and engines is 44,545.5 N.

The given parameters;

mass of the jet, = 4000 kgspeed of the jet, v = 70 m/slength of the deck, d = 220 m

The combined force of the catapult and engines is determined by applying work energy theorem as shown below;

[tex]W = \Delta E\\\\Fd = \frac{1}{2}m(v^2 -u^2) \\\\220F = \frac{1}{2}(4000)(70^2 - 0^2) \ \\\\220 F = 9,800,000\\\\F = \frac{9,800,000}{220} \\\\F = 44,545.5 \ N[/tex]

Thus, the combined force of the catapult and engines is 44,545.5 N.

Learn more here:https://brainly.com/question/10063455

A car starts from rest and reaches a velocity of 30 m/s in 10 s. If the car
has a mass of 1500 kg, what net force is exerted upon the car?

Answers

Answer:

f= ma

Explanation:

v-u/ t

30-0/10

3m/s

maas 1500

1500*3

4500

What is the momentum of 100 kg running at 4m/s north?

Answers

The momentum is known as mass x velocity then u should say that it will be 400 kg m/s

The graph below shows the velocity of a car as it attempts to set a speed
record.
Velocity vs. Time
1400
1300
1200
1100
1000
4 45
3
1 (s)
At what point is the car the fastest?
A. t = 1.0 s
B. t = 4.2 s
C. t = 3.0 s
D. t = 4.5 s

Answers

Guessing (A) because it had the highest velocity number on the graph and it matched 1s

From the graph, it is clear that, the velocity is at a time of 1 s is highest. The velocity at 1 second corresponds to 1250 km/hr. Then it decreases with time.

What is velocity - time graph ?

The velocity - time graph shows the change in velocity with respect to time. The velocity is placed in y -axis and time is given in x - axis. The slope of the curve in velocity - time graph gives the acceleration of the object.

Similarly, the position of the object in meter after a t seconds can be determined from the velocity - time graph. It is the rate of change in velocity of the object.

From the graph, it is clear that, the curve has its peak at 1 second. After that the peak descends down. Hence, the maximum velocity of the car is at a time of 1 second at which the velocity is 1250 km/hr.

Find more on velocity - time graph :

https://brainly.com/question/28357012

#SPJ7

pls answer this
quick as possible

Answers

Answer:

The answer is the 4th one

Explanation:

Good luck man

Need help ASAP please help

Answers

Answer:

.....

Explanation:

which property of potential energy distinguishes it from kinetic energy

Answers

Answer:

Shape and position

Explanation:

Hope this helps! :)

Light travels fastest through which of the following?

A.
air

B.
glass

C.
vacuum

D.
water

Answers

ANSWER: the answer is C, vacuum
light travels fastest through a VACUUM .

Which form of energy has the most potential globally

a) Solar energy

b) Bio energy

c) Wind energy

d) Geothermal energy

Answers

Answer:

i think the answer is solar,

Explanation:

because it is a natural resource im sorry if im wrong

What type of numbers in a measurement are always significant?

Answers

Answer:

Non-zero digits

Explanation:

umm (ꏿ﹏ꏿ;)

Answer:

There's three rules on determining how many important quantities are in a number: Non-zero digits are always predominant. Any zeros between two significant digits are always major. The final zero or dangling zeros in the decimal segment are really only important.

I hope this answered your question, have a nice day!

During the slowing down process, there is a time when the angular speed is 0.5 rev/s. The fan arm is 0.8 m long. What is the speed of a point on the end of the fan arm at this time

Answers

Answer:

2.51 m/s

Explanation:

Given that,

Angular speed of a fan, [tex]\omega=0.5\ rev/s = 3.14\ rad/s[/tex]

Length of the fan arm, r = 0.8 m

We need to find the speed of a point on the end of the fan arm at this time. Let v is the speed. It is given in terms of angular speed is given by :

[tex]v=r\omega\\\\v=0.8\times 3.14\\\\v=2.51\ m/s[/tex]

So, the required speed is 2.51 m/s.

What is the average emf between the ends of the wings of a plane flying at a speed of 500 km/hr when the vertical component?

Answers

Answer:

This question is incomplete

Explanation:

This question is incomplete because there are some parameters that are missing. However, when calculating the average emf and speed/velocity is provided, then

average emf = Brvl

where Br is the vertical component of the earth's magnetic field (in weber per square meter, Wb/m²)

v is velocity (in m/s)

l is the length (in meter) of the wing span

Why is struggling an important part of the process of learning?

Answers

Answer:

Students need a safe environment to take risks and struggle. It’s uncomfortable to struggle, but struggling—falling down and getting back up—is an important facet to learning. Productive struggle is not about being in pain or becoming frustrated.

Please mark branliest!

Explanation: it shows that your really trying your best and when you mess up its telling you that your actually learning from your mistakes.

asheed and Sofia are riding a merry-go-round that is spinning steadily (uniform circular motion). Sofia is twice as far from the axis as is Rasheed. Sophia's acceleration is _________ that of Rasheed. *

Answers

Answer:

The same as

Explanation:

First of all, they are in a merry go round, which is a circular one. And thus, we would be dealing with circular motions.

The angular velocity of a merry go round, in this instance, is given by

w = Δ/Δt

The formula has nothing whatsoever to do with distance, and as such, both Rasheed and Sofia would have the same angular velocity.

Transferring this further, the angular acceleration is given as

α = Δw/Δt

Remember I said the velocity has nothing to do with distance, well, so does the acceleration as we can see from the formula stated. And therefore, both Rasheed and Sofia would have the same angular acceleration

At 96° F the saturation density of air is 0.04 kg/m3. If the weather report says the relative humidity is 90 % when the temperature is 96°F, the humidity is

Answers

Answer:

The value is  [tex]H = 0.036 \ kg/m^3[/tex]

Explanation:

From the question we are told that

   The saturation density of air is [tex]\rho = 0.04 \ kg/m^3[/tex]

   The temperature for this saturation density to occur  [tex]T_s = 96^o F[/tex]

    The relative humidity at this temperature is  [tex]R_h = 90\% = 0.90[/tex]

Generally the relative humidity is mathematically represented as

      [tex]R_H = \frac{H}{\rho}[/tex]

Here H represents humidity

=> [tex]0.90 = \frac{H}{0.04}[/tex]

=>  [tex]H = 0.90 * 0.04[/tex]

=>  [tex]H = 0.036 \ kg/m^3[/tex]

1500 POINTS TO WHOEVER ANSWERS THIS FIRST!!!!!!!!!!

1. You drop a bowling ball 15m from the top of the science building. What is its
velocity as it impacts the ground?

2. A cheetah accelerates from 0 to 13m/s in 3 seconds. How far does it travel
during that time?

3. Your foolish friend shoots a bullet straight in the air at a muzzle velocity of
380 m/s. How high does the bullet go (neglecting air resistance)?

4. Your foolish friend shoots a bullet straight in the air at a muzzle velocity of
380 m/s. What is the bullets velocity when it falls back down and hits your
friend?

Answers

Answer: Multiply the time by the acceleration due to gravity to find the velocity when the object hits the ground. If it takes 9.9 seconds for the object to hit the ground, its velocity is (1.01 s)*(9.8 m/s^2), or 9.9 m/s.

Explanation:

what can you infer from the statement. velocity is an object is zero

Answers

The object is moving at a constant speed

If a second planet were of the same radius R and made of the same material but had a hollow center of radius 0.50 R , what would be the acceleration of gravity at its surface

Answers

Answer:

[tex]g_2=\dfrac{7}{8}g[/tex]

Explanation:

G = Gravitational constant

M = Mass of planet

R = Radius of planet

Acceleration due to gravity on first planet

[tex]g=\dfrac{GM}{R}[/tex]

Assuming that the planets have the same mass density [tex]\rho[/tex]

Density of first planet

[tex]\rho=\dfrac{M}{V}\\\Rightarrow \rho=\dfrac{M}{\dfrac{4}{3}\pi R^3}\\\Rightarrow M=\rho \dfrac{4}{3}\pi R^3[/tex]

Density of second planet

[tex]\rho=\dfrac{M_2}{V_2}=\dfrac{M_2}{\dfrac{4}{3}\pi R^3-\dfrac{4}{3}\pi (0.5R)^3}\\\Rightarrow \rho=\dfrac{M_2}{\dfrac{4}{3}\pi R^3(1-\dfrac{1}{2^3})}\\\Rightarrow \rho=\dfrac{M_2}{\dfrac{4}{3}\pi R^3(1-\dfrac{1}{8})}\\\Rightarrow \rho=\dfrac{M_2}{\dfrac{4}{3}\pi R^3(\dfrac{7}{8})}\\\Rightarrow M_2=\rho\dfrac{4}{3}\pi R^3(\dfrac{7}{8})\\\Rightarrow M_2=M\dfrac{7}{8}[/tex]

Acceleration due to gravity on the second planet

[tex]g_2=\dfrac{GM_2}{R}\\\Rightarrow g_2=\dfrac{GM\dfrac{7}{8}}{R}\\\Rightarrow g_2=\dfrac{7}{8}g[/tex]

The acceleration due to gravity of the planet would be [tex]\dfrac{7}{8}[/tex] times the acceleration due to gravity on the first planet.

As the rate of radioactive decay becomes smaller half life become...

Answers

the decay half-life of a radioactive material can be changed. Radioactive decay happens when an unstable atomic nucleus spontaneously changes to a lower-energy state and spits out a bit of radiation. This process changes the atom to a different element or a different isotope.

Which describes an image that a concave mirror can make?

A. The image is always virtual.
B. The image can be either virtual or real.
C. The image is never upside down.
D. The image can only be the same size as the object.

Answers

Answer:

A

Explanation:

The image formed by the concave mirror is always virtual. An enlarged image is caused when the concave mirror is positioned too near to the object.

What is a concave mirror?

When a hollow spherical is divided into pieces and the exterior surface of each cut portion is painted, it forms a mirror, with the inner surface reflecting the light.

A concave mirror is a name for this sort of mirror. An enlarged and fake image is caused when the concave mirror is positioned too near to the object.

When the distance between the item and the mirror is increased, however, the size of the image decreases, and a true picture is generated.

The picture created by the concave mirror may be manipulated. The image formed by the concave mirror is always virtual.

Hence, option A is correct.

To learn more about the concave mirror, refer to the link;

https://brainly.com/question/25937699

#SPJ2

Explain the "war of the currents"

Answers

Answer:

the war of currents is

Explanation:

The war of currents was a series of events surrounding the introduction of competing electric power transmission systems in the late 1880s and early 1890s.

Answer:

a series of events surrounding the introduction of competing electric power transmission systems in the late 1880s and early 1890s

Explanation:

a. A remote-control car with a constant velocity drives off the top of a wall that is 10.0 m high and lands 4.60 m from the base of the wall. Draw a diagram of the problem. Label the known and unknown quantities. b. What is the car's speed before it drives off the top of the wall? c. What is the car's vertical speed just before impact? d. How far from the base of the wall would the remote-control car have landed if it had been subject to the gravitational field on the Moon (1.7 N/kg) ?

Answers

Answer:

a. Please see the attached graph and drawing combined created with Microsoft Excel

b. Approximately 3.2217 m/s

c. Approximately 14.0 m/s  

d. Approximately 11.05 meters

Explanation:

a. The given parameters are;

The height of the wall, h = 10.0 m

The distance from the base of the wall the car lands = 4.60 m

The time, t, it takes the car to land is given by the equation for free fall as follows;

h = 1/2·g·t²

Where;

g = The acceleration due to gravity = 9.81 m/s²

From the equation for free fall, we have;

h/(1/2·g) = t²

∴ t = √(h/(1/2·g) ) = √(10/(1/2·9.81) ) ≈ 1.4278

The time it takes the car to land, t ≈ 1.4278 seconds

b. The horizontal speed of the car = Horizontal distance/(Time) = 4.6/1.4278 ≈ 3.2217 m/s

The horizontal speed of the car before it drives off the wall  ≈ 3.2217 m/s

c. The car's vertical speed just before impact is given by the following equation;

v = u + gt

Where;

u = The initial vertical speed = 0

t = The time it takes before impact ≈ 1.4278 seconds

∴ v = 9.81 × 1.4278 ≈ 14.0 m/s  

The car's vertical speed just before impact, v ≈ 14.0 m/s  

d. Whereby the car is subject to the gravitational field of the moon, we have;

Gravitational force per kilogram = 1.7 N/kg

∴ Gravitational acceleration = 1.7 m/s².

The time it takes the car to land whilst subject to the gravitational field of the moon is therefore;

[tex]t_{Moon}[/tex] = √(h/(1/2·g)) = √(10/(1/2 × 1.7)) ≈ 3.43

[tex]t_{Moon}[/tex] ≈ 3.43 seconds

The horizontal distance covered, at the car's horizontal speed in the time of free fall ≈ 3.2217 m/s ×  3.43 seconds ≈ 11.05 meters

The horizontal distance covered, at the car's horizontal speed in the time of free fall  = The distance the car will land from the base of the wall ≈ 11.05 meters

The distance the car will land from the base of the wall ≈ 11.05 meters.

How much tension must a rope withstand if it is used to accelerate a 1200-kg car vertically upwards at 0.8m/s2?

Answers

Answer:

T = 12732 [N]

Explanation:

To solve this problem we must use newton's second law which tells us that the sum of forces on a body is equal to the product of mass by acceleration.

By means of the attached free body diagram, we can better understand the solution to this problem.

As we see in the diagram the tension Force T lifts the car upwards so the movement is upwards. Therefore we have two forces one upward (positive) of the force T and the other negative downward due to the weight of the vehicle.

As the movement is up the acceleration is also up (with a positive sign).

ΣF = m*a

where:

F = forces [N] (units of Newtons)

m = mass = 1200 [kg]

a = acceleration = 0.8 [m/s²]

T - 1200*9.81 = 1200*(0.8)

T = 12732 [N]

Answer:

12,720

Explanation:

You tie the loose end of a 0.1 kg yo-yo string to your finger and then release the yo-yo so that it spins down toward the ground (the yo-yo is released from rest and the end of the string tied to your finger remains motionless). After the yo-yo falls a distance of 0.9 m, it has a translational speed of 4 m/s and an angular speed of 180 rad/s. What is the moment of inertia of the yo-yo

Answers

Answer:

The answer is "[tex]5.06 \times 10^{-6} \ kg \ m^2[/tex]"

Explanation:

[tex]\to E_1=0..............(i)\\\\\to E_2= \frac{mV^2}{2} +\frac{Iw^2}{2} - mgh.............(ii)\\\\ \Delta E=0\\\\\to mgh= \frac{mV^2}{2} +\frac{Iw^2}{2} \\\\ \to 2 \ mgh= mV^2 +Iw^2\\\\ \to 2 \ mgh- mV^2 =Iw^2\\\\ \to m(2gh- V^2) =Iw^2\\\\ \to I= \frac{m(2gh- V^2)}{w^2}[/tex]

       [tex]= 5.06 \times 10^{-6} \ kg \ m^2[/tex]

describe the motion of the fireball in the air

Answers

Explanation:

doesn't get the question and the answer to

Answer:

(this is the sample answer:After the launch, the fireball moves upward, than it falls back down to EarthEartEarthEarthEarthEarth

Explanation:

Other Questions
When and how should resources be invested to close gaps between those who do and dont use the Internet? Que quiere decir esta frase?Shaina trajo el sentido de lo bello una vez ms a sus vidas espartanas what would be the measure of angle A?A. 70 degreesB. 79 degrees C. 55 degrees D. 44 degrees I really need a 100 I'm felling in all my classes, please Select the fraction that is equivalent to one-sixth. The Creek resistance was led byA. Chitto HarjoB. Archibald S. McKennonC. Pleasant PorterD. Henry L. Dawes 4. The value of a copy machine is $8500 when it is purchased. After two years its value is $7475. What is its value after 8 years? In the diagram, AB= DC and AC= DB. Why does m Pablo and Charles were conducting an investigation where they were measuring the energy of a glass marble as it rolled down a ramp. According to their calculations, the total energy of the marble decreased.Which statement below is the best explanation for the decrease in total energy?a.The energy decreased because it was destroyed by the interaction with the ramp.b. The total amount of energy always decreases in an energy conversion and is expected.c. The scientists calculations were incorrect; the energy totals should have been the same. d. The energy decreased because heat resulted from the friction between the marble and the ramp. What is the relationship between temperature and pressure What are 1. Dynamic character2. Static character3. Flat character4. Round character5. Theme 6. A government system is an example of a. Countries such as Iran have theocratic government systems. Such government systems reflect the cultural significance of in the country. An airplane travels at a constant speed of 320 miles per hour. How far, in miles, will the airplane travel in 15 minutes? 1. Recall Why is the Iceman nicknamed tzi? 8993.2x 10 use the powers of ten rules please help iv been stuck on this Identify the participial phrase in the sentence below.Picking up the pen, he signed his name on the guestbook. A balance uses small metal weights of known mass to determine the mass of a substance. Where would a balance NOT function correctly?A balance scale.A.in a vacuum on EarthB.on the Moon's surfaceC.on the Earth's highest mountainD.in a zero gravity environment Patrick Henry uses repetition through the speech through the use of questions. What is the purpose of asking so many questions? (Speech to the Virginia Convention)I NEED HELP ASAP PLEASEEEEE Which of the following statements is true? A. Chemical reactions can only absorb thermal energy. B. Chemical reactions can neither absorb thermal energy nor release thermal energy. C. Chemical reactions can either absorb thermal energy or release thermal energy. D. Chemical reactions can only release thermal energy. Luther Douglas became a citizen of the US shortly after the Constitutional Convention. He believed like many others in a weak federal government and supported a strong local/state government. To what party did Mr. Douglas belong?DemocraticRepublicanAnti-FederalistFederalist how do i find my sister's math question she just posted how do i find it