Answer:
404.3 J
Explanation:
Given that
Weight of the merry go round = 790 N
Radius if the merry go round = 1.6 m
Horizontal force applied = 45 N
Time taken = 4 s
To find the mass of the merry go round, we divide the weight by acceleration due to gravity. Thus,
m = F/g
m = 790 / 9.8
m = 80.6 kg
We know that the moment of inertia is given as
I = ½mr², on substitution, we have
I = ½ * 80.6 * 1.6²
I = 103.17 kgm²
Torque = Force applied * radius, so
τ = 45 * 1.6
τ = 72 Nm
To get the angular acceleration, we have,
α = τ / I
α = 72 / 103.17
α = 0.70 rad/s²
Then, the angular velocity is
ω = α * t
ω = 0.7 * 4
ω = 2.8 rad/s
Finally, to get the Kinetic Energy, we have
K.E = ½ * Iω², on substituting, we get
K.E = ½ * 103.17 * 2.8²
K.E = 404.3 J
Therefore, the kinetic energy is 404.3 J
After doing some exercises on the floor, you are lying on your back with one leg pointing straight up. If you allow your leg to fall freely until it hits the floor, what is the tangential speed of your foot just before it lands
Complete question is;
After doing some exercises on the floor, you are lying on your back with one leg pointing straight up. If you allow your leg to fall freely until it hits the floor, what is the tangential speed of your foot just before it lands? Assume the leg can be treated as a uniform rod x = 0.98 m long that pivots freely about the hip.
Answer:
Tangential speed of foot just before it lands is; v = 5.37m/s
Explanation:
Let U (potential energy) be zero on the ground.
So, initially, U = mgh
where, h = 0.98/2 = 0.49m (midpoint of the leg)
Now just before the leg hits the floor it would have kinetic energy as;
K = ½Iω²
where ω = v/r and I = ⅓mr²
So, K = ½(⅓mr²)(v/r)²
K = (1/6) × (mr²)/(v²/r²)
K = (1/6) × mv²
From principle of conservation of energy, we have;
Potential energy = Kinetic energy
Thus;
mgh = (1/6) × mv²
m will cancel out to give;
gh = (1/6)v²
Making v the subject, we have;
v = √6gh
v = √(6 × 9.81 × 0.49)
v = √28.8414
v = 5.37m/s
Difference between regular and irregular object.
Hope this helps....
Good luck on your assignment.....
A butcher grinds 5 and 3/4 lb of meat then sells it for 2 and 2/3 pounds to the customer what is the maximum amount me that the butcher can sell to the next customer
Answer:
The maximum amount of meat that the butcher can sell is [tex]3\frac{1}{12}\:lb[/tex]
Explanation:
The maximum amount can be found by taking the difference of mixed numbers.
[tex]5\frac{3}{4}-2\frac{2}{3}\\\\\mathrm{Subtract\:the\:numbers:}\:5-2=3\\\\\mathrm{Combine\:fractions:\:}\frac{3}{4}-\frac{2}{3}=\frac{1}{12}\\\\=3\frac{1}{12}\\[/tex]
Best Regards!
From a height of 40.0 m, a 1.00 kg bird dives (from rest) into a small fish tank containing 50.5 kg of water. Part A What is the maximum rise in temperature of the water if the bird gives it all of its mechanical energy
Answer:
0.00185 °C
Explanation:
From the question,
The potential energy of the bird = heat gained by the water in the fish tank.
mgh = cm'(Δt)................... Equation 1
Where m = mass of the bird, g = acceleration due to gravity, h = height, c = specific heat capacity of water, m' = mass of water, Δt = rise in temperature of water.
make Δt the subject of the equation
Δt = mgh/cm'............... Equation 2
Given: m = 1 kg, h = 40 m, m' = 50.5 kg
constant: g = 9.8 m/s², c = 4200 J/kg.K
Substitute into equation 2
Δt = 1(40)(9.8)/(50.5×4200)
Δt = 392/212100
Δt = 0.00185 °C
You are trying to overhear a juicy conversation, but from your distance of 25.0 m, it sounds like only an average whisper of 25.0 dB. So you decide to move closer to give the conversation a sound level of 80.0 dB instead. How close should you come?
Answer:
r₂ = 1,586 m
Explanation:
For this problem we are going to solve it by parts, let's start by finding the sound intensity when we are 25 m
β = 10 log (I / I₀)
where Io is the sensitivity threshold 10⁻¹² W / m²
I₁ / I₀ = [tex]e^{\beta/10}[/tex]
I₁ = I₀ e^{\beta/10}
let's calculate
I₁ = 10⁻¹² e^{25/10}
I₁ = 1.20 10⁻¹¹ W / m²
the other intensity in exercise is
I₂ = 10⁻¹² e^{80/10}
I₂ = 2.98 10⁻⁹ W / m²
now we use the definition of sound intensity
I = P / A
where P is the emitted power that is a constant and A the area of the sphere where the sound is distributed
P = I A
the area a sphere is
A = 4π r²
we can write this equation for two points of the found intensities
I₁ A₁ = I₂ A₂
where index 1 corresponds to 25m and index 2 to the other distance
I₁ 4π r₁² = I₂ 4π r₂²
I₁ r₁² = I₂ r₂²
r₂ = √ (I₁ / I₂) r₁
let's calculate
r₂ = √ (1.20 10⁻¹¹ / 2.98 10⁻⁹) 25
r₂ = √ (0.40268 10⁻²) 25
r₂ = 1,586 m
At least how many Calories does a mountain climber need in order to climb from sea level to the top of a 5.42 km tall peak assuming the muscles of the climber can convert chemical energy to mechanical energy with an efficiency of 16.0 percent. The total mass of the climber and the equipment is 78.4 kg. (Enter your answer as a number without units.)
Answer:
Ec = 6220.56 kcal
Explanation:
In order to calculate the amount of Calories needed by the climber, you first have to calculate the work done by the climber against the gravitational force.
You use the following formula:
[tex]W_c=Mgh[/tex] (1)
Wc: work done by the climber
g: gravitational constant = 9.8 m/s^2
M: mass of the climber = 78.4 kg
h: height reached by the climber = 5.42km = 5420 m
You replace in the equation (1):
[tex]W_c=(78.4kg)(9.8m/s^2)(5420m)=4,164,294.4\ J[/tex] (2)
Next, you use the fact that only 16.0% of the chemical energy is convert to mechanical energy. The energy calculated in the equation (2) is equivalent to the mechanical energy of the climber. Then, you have the following relation for the Calories needed:
[tex]0.16(E_c)=4,164,294.4J[/tex]
Ec: Calories
You solve for Ec and convert the result to Cal:
[tex]E_c=\frac{4,164,294.4}{016}=26,026,840J*\frac{1kcal}{4184J}\\\\E_c=6220.56\ kcal[/tex]
The amount of Calories needed by the climber was 6220.56 kcal
New evidence increasingly emphasizes that __________.
Identify the following as combination, decomposition, replacement, or ion exchange reactions: Al(s) + 3 Cl2(g) → 2 AlCl3(s) Ca(OH)2(aq) + H2SO4(aq) → CaSO4(aq) + 2 H2O(l
Answer:
2 Al(s) + 3Cl₂(g) → 2AlCl₃(s)
This is a combination reaction.
Ca(OH)₂(aq) + H₂SO₄(aq) → CaSO₄(aq) + 2H₂O(l)
This is a replacement reaction.
Explanation:
A combination reaction is a reaction in which two reagents are combined into one product. The reaction has the following general form:
A + B → AB
where A and B represent any two chemical substances.
2 Al(s) + 3Cl₂(g) → 2AlCl₃(s)
This is a combination reaction because a single compound forms from two or more reacting species.
Double Substitution, Double Displacement or Metastasis Reactions are those in which two elements found in different compounds exchange their positions forming two new compounds. These chemical reactions do not present changes in the number of oxidation or relative load of the elements. So they are not considered redox reactions.
The solvent of the double displacement reactions usually is water and the reagents and products are usually ionic compounds (cations or anions are exchanged), although they can also be acids or bases.
In general, this type of reaction can be expressed as:
AB + CD ⇒ AD + CD
In the reaction:
Ca(OH)₂(aq) + H₂SO₄(aq) → CaSO₄(aq) + 2H₂O(l)
This is a replacement reaction because it is a double replacement reaction in which the ions are exchanged to form new compounds.
A ray in glass (n = 1.51) reaches a boundary with air at 49.2 deg. Does it reflect internally or refract into the air? Enter 0 for reflect, and 1 for refract.
Answer:
0 - Then, the ray is totally reflected
Explanation:
The ray reaches the boundary between the two mediums at 49.2°.
If the ray is totally reflected it is necessary that the crictical angle is lower that the incidet angle.
You use the following to calculate the critical angle:
[tex]\theta_c=sin^{-1}(\frac{n_2}{n_1})[/tex] (1)
n2: index of refraction of the second medium (air) = 1.00
n1: index of refraction of the first medium (glass) = 1.51
You replace the values of the parameters in the equation (1):
[tex]\theta_c=sin^{-1}(\frac{1.00}{1.51})=41.47\°[/tex]
The critical angle is 41.47°, which is lower than the incident angle 49.2°.
Then, the ray is totally reflected.
0
A 2-kg block is released from rest at the top of a 20-mlong frictionless ramp that is 4 m high. At the same time, an identical block is released next to the ramp so that it drops straight down the same 4 m. What are the values for each of the following for the blocks just before they reach ground level.
Required:
a. Gravitational potential energy Block a_____ J Block b _____ J
b. Kinetic energy Block a _____ J Block b _____
c. Speed Block a _____ J Block b _____ J
d. Momentum Block a _____ J Block b _____ J
Answer:
A.) 78.4 J for both
B.) 78.4 J for both
C.) 8.85 m/s for both
D.) 17.7 kgm/s
Explanation:
Given information:
Mass m = 2 kg
Distance d = 20 m
High h = 4 m
A.) Gravitational potential energy can be calculated by using the formula
P.E = mgh
P.E = 2 × 9.8 × 4
P.E = 78.4 J
Since the two objects are identical, the gravitational potential energy of the block for both a and b will be 78.4 J
B.) According to conservative energy,
Maximum P.E = Maximum K.E.
Therefore, the kinetic energy of the two blocks will be 78.4 J
C.) Since K.E = 1/2mv^2 = mgh
V = √(2gh)
Solve for velocity V by substituting g and h into the formula
V = √(2 × 9.8 × 4)
V = √78.4
V = 8.85 m/s
The velocities of both block will be 8.85 m/s
D.) Momentum is the product of mass and velocity. That is,
Momentum = MV
Substitute for m and V into the formula
Momentum = 2 × 8.85 = 17.7 kgm/s
Both block will have the same value since the ramp Is frictionless.
A wire with mass 90.0g is stretched so that its ends are tied down at points 88.0cm apart. The wire vibrates in its fundamental mode with frequency 80.0Hz and with an amplitude of 0.600cm at the antinodes.a) What is the speed of propagation of transverse waves in the wire?b) Compute the tension in the wire.
Answer:
a) V = 140.8 m/s
b) T = 2027.52 N = 2.03 KN
Explanation:
a)
The formula for the speed of the wave is given as follows:
f₁ = V/2L
V = 2f₁L
where,
V = Speed of Wave = ?
f₁ = Fundamental Frequency = 80 Hz
L = Length of Wire = 88 cm = 0.88 m
Therefore,
V = (2)(80 Hz)(0.88 m)
V = 140.8 m/s
b)
Another formula for the speed of wave is:
V = √T/μ
V² = T/μ
T = V²μ
where,
T = Tension in String = ?
μ = Linear Mass Density of Wire = Mass of Wire/L = 0.09 kg/0.88 m
μ = 0.1 kg/m
Therefore,
T = (140.8 m/s)²(0.1 kg/m)
T = 2027.52 N = 2.03 KN
Sophie throws a tennis ball down from a height of 1.5 m at an angle of 450 with respect to vertical. She drops another tennis ball from the same height. Use the Energy Interaction Model to predict which ball will hit the ground with greater speed.
Given that,
Height =1.5 m
Angle = 45°
We need to find the greater speed of the ball
Using conservation of energy
[tex]P.E_{i}+K.E_{f}=P.E_{f}+K.E_{f}[/tex]
[tex]mgh+\dfrac{1}{2}mv_{i}^2=mgh+\dfrac{1}{2}mv_{f}^2[/tex]
Here, initial velocity and final potential energy is zero.
[tex]mgh=\dfrac{1}{2}mv_{f}^2[/tex]
Put the value into the formula
[tex]9.8\times1.5=\dfrac{1}{2}v_{f}^2[/tex]
[tex]v_{f}^2=2\times9.8\times1.5[/tex]
[tex]v_{f}=\sqrt{2\times9.8\times1.5}[/tex]
[tex]v_{f}=5.42\ m/s[/tex]
Hence, the greater speed of the ball is 5.42 m/s.
The temperature coefficient of resistivity for the metal gold is 0.0034 (C )1, and for tungsten it is 0.0045 (C )1. The resistance of a gold wire increases by 7.0% due to an increase in temperature. For the same increase in temperature, what is the percentage increase in the resistance of a tungsten wire
Answer:
% increase in resistance of tungsten = 9.27%
Explanation:
We are given:
Co-efficient of resistivity for the metal gold; α_g = 0.0034 /°C
Co-efficient of resistivity for tungsten;α_t = 0.0045 /°C
% Resistance change of gold wire due to temperature change = 7%
Now, let R1 and R2 be the resistance before and after the temperature change respectively.
Thus;
(R2 - R1)/R1) x 100 = 7
So,
(R2 - R1) = 0.07R1
R2 = R1 + 0.07R1
R2 = 1.07R1
The equation to get the change in temperature is given as;
R2 = R1(1 + αΔt)
So, for gold,
1.07R1 = R1(1 + 0.0034*Δt)
R1 will cancel out to give;
1.07 = 1 + 0.0034Δt
(1.07 - 1)/0.0034 = Δt
Δt = 20.59°C
For this same temperature for tungsten, let Rt1 and Rt2 be the resistance before and after the temperature change respectively and we have;
Rt2 = Rt1(1 + α_t*Δt)
So, Rt2/Rt1 = 1 + 0.0045*20.59
Rt2/Rt1 = 1.0927
From earlier, we saw that;
(R2 - R1)/R1) x 100 = change in resistance
Similarly,
(Rt2 - Rt1)/Rt1) x 100 = change in resistance
Simplifying it, we have;
[(Rt2/Rt1) - 1] × 100 = %change in resistance
Plugging in the value of 1.0927 for Rt2/Rt1, we have;
(1.0927 - 1) × 100 = %change in resistance
%change in resistance = 9.27%
A stationary 6-kg shell explodes into three pieces. One 4.0 kg piece moves horizontally along the negative x-axis. The other two fragments, each 1.0 kg, move in directions that make 60o angle above and below the positive x-axis and their speeds are 60 m/s each. What is the velocity of the 4.0-kg fragment
Answer:
-15 m/s
Explanation:
The computation of the velocity of the 4.0 kg fragment is shown below:
For this question, we use the correlation of the momentum along with horizontal x axis
Given that
Weight of stationary shell = 6 kg
Other two fragments each = 1.0 kg
Angle = 60
Speed = 60 m/s
Based on the above information, the velocity = v is
[tex]1\times 60 \times cos\ 60 + 1\times 60 \times cos\ 60 - 4\ v = 0[/tex]
[tex]\frac{60}{2} + \frac{60}{2} - 4\ v = 0[/tex]
[tex]v = \frac{60}{4}[/tex]
= -15 m/s
A car travels 2500 m in 8 minutes. Calculate the speed at which the car travelled
Answer:
5.95m/s to 2 decimal places
Explanation:
In physics speed is measured in metres per second so convert 8mins to seconds
8x60=420 seconds
The formula needed:
Speed (m/s)= Distance (m)/Time (s)
2500/420=5.95m/s
A 300 g bird flying along at 6.2 m/s sees a 10 g insect heading straight toward it with a speed of 35 m/s (as measured by an observer on the ground, not by the bird). The bird opens its mouth wide and enjoys a nice lunch.
Required:
What is the bird's speed immediately after swallowing?
Answer:
The velocity of the bird is [tex]v_f = 4.87 \ m/s[/tex]
Explanation:
From the question we are told that
The mass of the bird is [tex]m_1 = 300 \ g = 0.3 \ kg[/tex]
The initial speed of the bird is [tex]u_1 = 6.2 \ m/s[/tex]
The mass of the insect is [tex]m_2 = 10 \ g = 0.01 \ kg[/tex]
The speed of the insect is [tex]u_ 2 =-35 \ m/s[/tex]
The negative sign is because it is moving in opposite direction to the bird
According to the principle of linear momentum conservation
[tex]m_1 u_1 + m_2 u_2 = (m_1 + m_2 )v_f[/tex]
substituting values
[tex](0.3 * 6.2 ) + (0.01 * (-35)) = (0.3 + 0.01 )v_f[/tex]
[tex]1.51 = 0.31 v_f[/tex]
[tex]v_f = 4.87 \ m/s[/tex]
The Final velocity of Bird = 4.87 m/s
Mass of the bird = 300 g = 0.3 kg
Velocity of bird = 6.2 m/s
Momentum of Bird = Mass of bird [tex]\times[/tex] Velocity of Bird = 0.3 [tex]\times[/tex] 6.2 = 1.86 kgm/s
Mass of the insect = 10 g = 0.01 kg
Velocity of insect = - 35 m/s
Momentum of the Insect = Mass of Insect [tex]\times[/tex] Velocity of Insect = - 0.35 kgm/s
According to the law of conservation of momentum We can write that
In the absence of external forces on the system , the momentum of system remains conserved in that particular direction.
The bird opens the mouth and enjoys the free lunch hence
Let the final velocity of bird is [tex]v_f[/tex]
Initial momentum of the system = Final momentum of the system
1.86 -0.35 = [tex]v_f[/tex] ( 0.01 + 0.3 )
1.51 = [tex]v_f[/tex] 0.31
[tex]v_f[/tex] = 4.87 m/s
The Final velocity of Bird = 4.87 m/s
For more information please refer to the link below
https://brainly.com/question/18066930
What will happen to an astronaut when the jets produce these four forces
Calculate the amount of kinetic energy the car stores if it has a mass of 1200 kg and speed of 15 m/s
Answer:
KE = 135,000 j or 135 KJ
Explanation:
KE=0.5mv^2
KE=0.5*1200*15^2
KE = 135,000 joules or 135 Kilo Joules
What is the on ohooke benden
er ord power
What is the main difference between work, power and energy
Answer:Work is the energy required to move an object from one point to another. while power is the energy transferred per unit time.
The force a spring exerts on a body is a conservative force because:
a. a spring always exerts a force parallel to the displacement of the body.
b. the work a spring does on a body is equal for compressions and extensions of equal magnitude.
c. the net work a spring does on a body is zero when the body returns to its initial position.
d. the work a spring does on a body is equal and opposite for compressions and extensions of equal magnitude.
e. a spring always exerts a force opposite to the displacement of the body.
Answer:
c. the net work a spring does on a body is zero when the body returns to its initial position
Explanation:
A force is conservative when the net work done over any path that returns to the initial position is zero. Choice C matches that definition.
An ideal spring of the kind used in physics problems has the characteristic that it applies the same force at the same distance always. So any work required to extend or compress the spring is reversed when the reverse motion takes place.
When using a mercury barometer , the vapor pressure of mercury is usually assumed to be zero. At room temperature mercury's vapor pressure is about 0.0015 mm-Hg. At sea level, the height hhh of mercury in a barometer is about 760 mm.Required:a. If the vapor pressure of mercury is neglected, is the true atmospheric pressure greater or less than the value read from the barometer? b. What is the percent error? c. What is the percent error if you use a water barometer and ignore water's saturated vapor pressure at STP?
Answer:
Explanation:
(a)
The true atmospheric pressure will has more value than the reading in the barometer. If Parm is the atmospheric
pressure in the tube then the resulting vapour pressure is
Patm - pgh = Prapor
The final reading ion the barometer is
pgh = Palm - Proper
Hence, the true atmospheric pressure is greater.
you can find the answer in this book
physics principles with Applications, Global Edition Problem 67P: Chapter: CH 13 Problem:67p
A woman is standing in the ocean, and she notices that after a wave crest passes by, five more crests pass in a time of 50.2 s. The distance between two successive crests is 30.2 m. What is the wave's (a) period, (b) frequency, (c) wavelength, and (d) speed
Explanation:
(a) The period of a wave is the time required for one complete cycle. In this case, we have the time of five cycles. So:
[tex]T=\frac{t}{n}\\\\T=\frac{50.2s}{5}\\T=10.04s[/tex]
(b) The frequency of a wave is inversely proportional to its period:
[tex]f=\frac{1}{T}\\f=\frac{1}{10.04s}\\f=0.01Hz[/tex]
(c) The wavelength is the distance between two successive crests, so:
[tex]\lambda=30.2m[/tex]
(d) The speed of a wave is defined as:
[tex]v=f\lambda\\v=(0.1Hz)(30.2m)\\v=3.02\frac{m}{s}[/tex]
A cart of mass 350 g is placed on a frictionless horizontal air track. A spring having a spring constant of 7.5 N/m is attached between the cart and the left end of the track. The cart is displaced 3.8 cm from its equilibrium position. (a) Find the period at which it oscillates. s (b) Find its maximum speed. m/s (c) Find its speed when it is located 2.0 cm from its equilibrium position.
Answer:
(a) T = 1.35 s
(b) vmax = 0.17 m/s
(c) v = 0.056 m/s
Explanation:
(a) In order to calculate the period of oscillation you use the following formula for the period in a simple harmonic motion:
[tex]T=2\pi\sqrt{\frac{m}{k}}[/tex] (1)
m: mass of the cart = 350 g = 0.350kg
k: spring constant = 7.5 N/m
[tex]T=2\pi \sqrt{\frac{0.350kg}{7.5N/m}}=1.35s[/tex]
The period of oscillation of the car is 1.35s
(b) The maximum speed of the car is given by the following formula:
[tex]v_{max}=\omega A[/tex] (2)
w: angular frequency
A: amplitude of the motion = 3.8 cm = 0.038m
You calculate the angular frequency:
[tex]\omega=\frac{2\pi}{T}=\frac{2\pi}{1.35s}=4.65\frac{rad}{s}[/tex]
Then, you use the result of w in the equation (2):
[tex]v_{max}=(4.65rad/s)(0.038m)=0.17\frac{m}{s}[/tex]
The maximum speed if 0.17m/s
(c) To find the speed when the car is at x=2.0cm you first calculate the time t by using the following formula:
[tex]x=Acos(\omega t)\\\\t=\frac{1}{\omega}cos^{-1}(\frac{x}{A})\\\\t=\frac{1}{4.65rad/s}cos^{-1}(\frac{0.02}{0.038})=0.069s[/tex]
The speed is the value of the following function for t = 0.069s
[tex]|v|=|\omega A sin(\omega t)|\\\\|v|=(4.65rad/s)(0.038m)sin(4.65rad/s (0.069s))=0.056\frac{m}{s}[/tex]
The speed of the car is 0.056m/s
A particle leaves the origin with a speed of 3 106 m/s at 38 degrees to the positive x axis. It moves in a uniform electric field directed along positive y axis. Find Ey such that the particle will cross the x axis at x
Answer:
If the particle is an electron [tex]E_y = 3.311 * 10^3 N/C[/tex]
If the particle is a proton, [tex]E_y = 6.08 * 10^6 N/C[/tex]
Explanation:
Initial speed at the origin, [tex]u = 3 * 10^6 m/s[/tex]
[tex]\theta = 38^0[/tex] to +ve x-axis
The particle crosses the x-axis at , x = 1.5 cm = 0.015 m
The particle can either be an electron or a proton:
Mass of an electron, [tex]m_e = 9.1 * 10^{-31} kg[/tex]
Mass of a proton, [tex]m_p = 1.67 * 10^{-27} kg[/tex]
The electric field intensity along the positive y axis [tex]E_y[/tex], can be given by the formula:
[tex]E_y = \frac{2 m u^2 sin \theta cos \theta}{qx} \\[/tex]
If the particle is an electron:
[tex]E_y = \frac{2 m_e u^2 sin \theta cos \theta}{qx} \\[/tex]
[tex]E_y = \frac{2 * 9.1 * 10^{-31} * (3*10^6)^2 *(sin38)( cos38)}{1.6*10^{-19} * 0.015} \\[/tex]
[tex]E_y = 3311.13 N/C\\E_y = 3.311 * 10^3 N/C[/tex]
If the particle is a proton:
[tex]E_y = \frac{2 m_p u^2 sin \theta cos \theta}{qx} \\[/tex]
[tex]E_y = \frac{2 * 1.67 * 10^{-27} * (3*10^6)^2 *(sin38)( cos38)}{1.6*10^{-19} * 0.015} \\[/tex]
[tex]E_y = 6.08 * 10^6 N/C[/tex]
A bicycle rider has a speed of 20.0 m/s at a height of 60 m above sea level when he begins coasting down hill. Sea level is the zero level for measuring gravitational potential energy. Ignoring friction and air resistance, what is the rider's speed when he coasts to a height of 18 m above sea level?
Answer:
The rider's speed will be approximately 35 m/s
Explanation:
Initially the rider has kinetic and potential energy, and after going down the hill, some of the potencial energy turns into kinetic energy. So using the conservation of energy, we have that:
[tex]kinetic_1 + potencial_1 = kinetic_2 + potencial_2[/tex]
The kinetic and potencial energy are given by:
[tex]kinetic = mass * speed^2 / 2[/tex]
[tex]potencial = mass * gravity * height[/tex]
So we have that:
[tex]m*v^2/2 + mgh = m*v'^2/2 + mgh'[/tex]
[tex]20^2/2 + 9.81*60 = v'^2/2 + 9.81*18[/tex]
[tex]v'^2/2 + 176.58 = 788.6[/tex]
[tex]v'^2/2 = 612.02[/tex]
[tex]v'^2 = 1224.04[/tex]
[tex]v' = 34.99\ m/s[/tex]
So the rider's speed will be approximately 35 m/s
A disk between vertebrae in the spine is subjected to a shearing force of 640 N. Find its shear deformation taking it to have the shear modulus of 1.00 109 N/m2. The disk is equivalent to a solid cylinder 0.700 cm high and 4.30 cm in diameter.
Answer:
3.08*10^-6 m
Explanation:
Given that
Total shearing force, F = 640 N
Shear modulus, S = 1*10^9 N/m²
Height of the cylinder, L = 0.7 cm
Diameter of the cylinder, d = 4.3 cm
The solution is attached below.
We have our shear deformation to be 3.08*10^-6 m
The planet should move around the elliptical orbit, and two segments of the orbit should become shaded in green. What aspect(s) of the orbit and shaded segments are the same?
Answer: not sure
Explanation:
A depiction of a famous scientific experiment is given. Consider how the beam changes when the magnet is off compared to when the magnet is on. A bell-shaped evacuated glass tube with a narrow end and a wide end is connected to a battery at the narrow end. In the center of the tube there is a negatively charged plate above the tube, a positively charged plate below the tube, and a magnet with the field turned off. A beam originating at the narrow end of the tube travels toward the wide end of the tube. With the magnetic field turned off, the beam path bends toward the positively charged plate and ends at the lower half of the wide end of the tube. A bell-shaped evacuated glass tube with a narrow end and a wide end is connected to a battery at the narrow end. In the center of the tube there is a negatively charged plate above the tube, a positively charged plate below the tube, and a magnet with the field turned n. A beam originating at the narrow end of the tube travels toward the wide end of the tube. With the magnetic field turned on, the beam path travels in a straight path to the center of the wide end of the tube. What type of beam was used in this experiment?
Answer:
The beam used is a negatively charged electron beam with a velocity of
v = E / B
Explanation:
After reading this long statement we can extract the data to work on the problem.
* They indicate that when the beam passes through the plates it deviates towards the positive plate, so the beam must be negative electrons.
* Now indicates that the electric field and the magnetic field are contracted and that the beam passes without deviating, so the electric and magnetic forces must be balanced
[tex]F_{e} = F_{m}[/tex]
q E = qv B
v = E / B
this configuration is called speed selector
They ask us what type of beam was used.
The beam used is a negatively charged electron beam with a velocity of v = E / B
what is the most likely elevation of point x?
A. 150 ft
B. 200 ft
C. 125 ft
D. 250 ft
An airplane flies between two points on the ground that are 500 km apart. The destination is directly north of the origination of the flight. The plane flies with an air speed of 120 m/s. If a constant wind blows at 10.0 m/s due west during the flight, what direction must the plane fly relative to north to arrive at the destination? Consider: east to the right, west to the left, north upwards and south downwards
Answer:
θ = 4.78º
with respect to the vertical or 4.78 to the east - north
Explanation:
This is a velocity compound exercise since it is a vector quantity.
The plane takes a direction, the air blows to the west and the result must be to the north, let's use the Pythagorean theorem to find the speed
v_fly² = v_nort² + v_air²
v_nort² = v_fly² + - v_air²
Let's use trigonometry to find the direction of the plane
sin θ = v_air / v_fly
θ = sin⁻¹ (v_air / v_fly)
let's calculate
θ = sin⁻¹ (10/120)
θ = 4.78º
with respect to the vertical or 4.78 to the north-east