Answer:
1.68 atm.
Explanation:
Given:
P1 = 4.23atm
V1 = 1870 mL
T1 = 293K
P2 = ?
V2 = 6.01 L = 6010 mL
T2 = 373 K
Assuming number of moles and R is constant:
[tex]\frac{P1V1}{T1} = \frac{P2V2}{T2}[/tex]
⇒ P2 = [tex]\frac{P1V1T2}{T1V2}[/tex] = [tex]\frac{2,950,467.3}{1,760,930}[/tex]
= 1.68 atm.
Hydrochloric acid and sodium hydroxide can be combined to form sodium chloride and water. Which best explains the reaction? The mass of sodium hydroxide will result in the same mass of sodium chloride. The total mass of hydrochloric acid and sodium hydroxide will result in a lower total mass of sodium chloride and water. The mass of hydrochloride acid will result in the same mass of sodium chloride. The total mass of hydrochloric acid and sodium hydroxide will result in the same total mass of sodium chloride and water.
Answer:
The statement "The total mass of hydrochloric acid and sodium hydroxide will result in the same total mass of sodium chloride and water." is true due to the Law of Conservation of Mass which states that matter cannot be created nor destroyed.
The correct answer to the question is: The total mass of hydrochloric acid and sodium hydroxide will result in the same total mass of sodium chloride and water.
Chemical equation is backed up by the law of conservation of matter (mass) which states that matter can neither be created nor destroyed during a chemical reaction but can be transferred from one form to the other.
Thus,
The total mass of reactants is equal to the total mass of products.
For example: let us consider the reaction between hydrogen and oxygen to produce water
2H₂ + O₂ —> 2H₂OReactant:2H₂ = 2(2×1) = 2(2) = 4 g
O₂ = 2 × 16 = 32 g
Total mass = 4 + 32 = 36 gProduct:2H₂O = 2[(2×1) + 16]
= 2[2 + 16]
= 2[18]
Total mass = 36 gThus,
Mass of reactant = mass of productFrom the above illustration, we can conclude that the total mass of hydrochloric acid and sodium hydroxide will result in the same total mass of sodium chloride and water.
Learn more: https://brainly.com/question/9434062
the lowest layer of Earths atmosphere is the__
Answer:
Troposphere
Explanation:
The troposphere is the lowest layer in the atmosphere, and where all the weather occurs. After the troposphere, there's the stratosphere, mesosphere, thermosphere, and exosphere.
I hope this helps!
Answer:
Troposphere is the lowest layer of the earths atmosphere.
Explanation:
The elements least likely to form bonds are found in which group?
Answer:
Noble gases are a unique set of elements in the periodic table because they don't naturally bond with other elements.
Explanation:
HAVE A GOOD DAY!
Answer:
The answer is Noble Gases!!
Explanation:
Hope i helped yall! Have a super fantastic day!! Play Among Us! (Of course when your done with school) lol, jk, but u can!! Byes yall!
what is genetic tagging
Answer:
Genetic tagging, or the identification and tracking of individual animals using DNA, is a non-invasive method of conducting research that uses samples from shed hair, feathers, feces, or saliva. ... Genetic tagging approaches are complementary to traditional approaches and add a powerful tool to the ecologists' toolkit."
Explanation:
an element p has atomic number 13 while q has the atomic 16..write down electric configuration of p and q
Answer:
P = 2,8,3
q = 2,8,6
Explanation:
Because the first shell contain 2 electron and the 2nd contain 8 electron and the last shell contain the electron which is left
Explanation:
p=1s^2,2s^2,2p^6,3s^2,3p^1
q=1s^2,2s^2,2p^6,3s^2,3p^4
the quantum numbers are used in my answer.
there are 4 quantum numbers.
1.principal quantum numbers
2.angular momentum quantum numbers
3.magnetic quantum numbers
4.spin quantum numbers
In this case,the angular momentum quantum numbers is being used.it describes the unique quantum state of an electron and is designated by the letter L.this behaviour manifests itself as the shape of the orbital.electron shells have distinct shapes denoted by letters,s,p,d,f.
l can be numbers like,0,1,2,3
the maximum electrons in each letter is,
s=2
p=6
d=10
f=14
the shapes of the sub_shells
s sub_shell is spherical
p sub_shell is two dumb_bells
d sub_shell is four dumb_bells
f sub_shell is eight dumb_bells
First gets brainliest
Answer:
reactants : before arrow sign
: CH4 and O2
product : after arrow sign
: CO2 and H2O
the answer is the second option
Ethene is a useful substance that can form polymers. It has a melting point of 169°C and a boiling point of 104°C. At which temperature would ethene be a liquid?
Answer:
-169°C to -104°C
Explanation:
Ethene, also known as ethylene exists in solid, liquid and gaseous states. Ethene is an aliens with condensed structural formula C2H4. Athens is a colourless gas. It is flammable and is also a sweet smelling gas in its pure form. It is the monomer in the production of polyethylene which is of great importance in the plastic industry. In agriculture, it is used to induce the ripening of fruits. It can be hydrated in order to produce ethanol.
The liquid range of ethene refers to the temperatures at which ethene is found in the liquid state of matter. It is actually the difference between the melting point and the boiling points of ethene. Hence the liquid range of ethene is -169°C to -104°C
If 0.360 J of heat is added to 0.7402 g of water, how much will the temperature increase?
Answer:
You are not supposed t9 be cheating
Explanation:
Answer:
ΔT = 0.116 °C
Explanation:
Using Formula
Q = mc ΔT
Where Q = 0.360, c = 4.184 and m = 0.7402
ΔT = Q/mc
ΔT = 0.360/ (4.184)(0.7402)
ΔT = 0.360 / 3.097
ΔT = 0.116 °C
So, The change in Temperature/Increase in Temperature is 0.116 °C
Wildflowers bloom earlier than large trees. This helps wildflowers compete for _____. water, light, food, or air
Answer: Light
Explanation:
The environment abiotic factors like sunlight, water, air, and soil are important for the growth of the plants. A wildflowers is a plant that grows in wild. It was not intentionally seeded or planted.
The light is one of the important environmental factor. As the wildflowers are blooming earlier than the large trees. Thus the wildflowers are receiving the light earlier than large trees.
Which refers to a measure of how acidic or basic a solution is? pH solubility reactiveness hardness
Answer:
it is Ph of solution that tells you the acdic and basic nature of solution
if PH is lower than 7 the soution is acidic and if PH is larger than 7 the solution is basic
Explanation:
Answer:
A. Ph
Explanation:
what mass of methanol is produced when 280.2 g of carbon monoxide reacts with 50.5 g of hydrogen? CO(g)+2H2(g)—> CH3OH(l)
Answer:
320.23g of CH3OH.
Explanation:
We'll begin by writing the balanced equation for the reaction. This is given below:
CO(g) + 2H2(g)—> CH3OH(l)
Next, we shall determine the masses of CO and H2 that reacted and the mass of CH3OH produced from the balanced equation. This is illustrated below below:
Molar mass of CO = 12 + 16 = 28g/mol
Mass of CO from the balanced equation = 1 x 28 = 28g
Molar mass of H2 = 2x1 = 2g/mol
Mass of H2 from the balanced equation = 2 x 2= 4g
Molar mass of CH3OH = 12 + (3x1) + 16 + 1 = 32g/mol
Mass of CH3OH from the balanced equation = 1 x 32 = 32g
From the balanced equation above,
28g of CO reacted with 4g of H2 to produce 32g of CH3OH.
Next, we shall determine the the limiting reactant. This is illustrated below:
From the balanced equation above,
28g of CO reacted with 4g of H2.
280.2g of CO will react with =
(280.2 x 4)/28 = 40.03g of H2.
From the calculations made above, we can see that only 40.03g out of 50.5g of H2 is required to react completely with 280.2g of CO.
Therefore, CO is the limiting reactant and H2 is the excess reactant.
Finally, we shall determine the mass of methanol, CH3OH produced from the reaction.
In this case, the limiting reactant will be used because it will give the maximum yield of the reaction since all of it is used up in the reaction. The limiting reactant is CO and the mass of methanol, CH3OH produced can be obtained as follow:
From the balanced equation above,
28g of CO reacted to produce 32g of CH3OH.
Therefore, 280.2g of CO will react to produce = (280.2 x 32)/28 = 320.23g of CH3OH.
Therefore, 320.23g of CH3OH were produced from the reaction.
Mention 6 products from coal tar as a result of destructive distillation of coal
Answer:
Coke, coal gas, gas carbon, ammonia liquor, and coal oil
The mass number of Fo? is 56. How many neutrons are there in a single Fo? atom?
28
30
56
58
Answer: A. 28
If we aren't talking about an isotope, then the number of neutrons and the number of protons in the nucleus are the same. Each proton weighs one atomic unit, and the same can be said about a neutron as well. So half of the weight is from the protons and half is from the neutrons. The electrons are extremely small relative to the protons that their weight is negligible.
what happens when sodium and sulfur combine
Answer:
Sodium sulfide is the chemical compound with the formula Na2S, or more commonly its hydrate Na2S·9H2O. Both the anhydrous and the hydrated salts are colorless solids. They are water-soluble, giving strongly alkaline solutions. When exposed to moist air, Na2S and its hydrates emit hydrogen sulfide, which smells like rotten eggs. Some commercial samples are specified as Na2S·xH2O, where a weight percentage of Na2S is specified. Commonly available grades have around 60% Na2S by weight, which means that x is around 3. Such technical grades of sodium sulfide have a yellow appearance owing to the presence of polysulfides. These grades of sodium sulfide are marketed as 'sodium sulfide flakes'.
Contents
1 Structure
2 Production
3 Reactions with inorganic reagents
4 Uses
4.1 Reagent in organic chemistry
5 Safety
6 References
Structure
Na2S adopts the antifluorite structure,[2][3] which means that the Na+ centers occupy sites of the fluoride in the CaF2 framework, and the larger S2− occupy the sites for Ca2+.
Production
Industrially Na2S is produced by carbothermic reduction of sodium sulfate often using coal:[4]
Na2SO4 + 2 C → Na2S + 2 CO2
In the laboratory, the salt can be prepared by reduction of sulfur with sodium in anhydrous ammonia, or by sodium in dry THF with a catalytic amount of naphthalene (forming sodium naphthalenide):[5]
2 Na + S → Na2S
Reactions with inorganic reagents
The sulfide ion in sulfide salts such as sodium sulfide can incorporate a proton into the salt by protonation:
S2−
+ H+ → SH−
Because of this capture of the proton ( H+), sodium sulfide has basic character. Sodium sulfide is strongly basic, able to absorb two protons. Its conjugate acid is sodium hydrosulfide (SH−
). An aqueous solution contains a significant portion of sulfide ions that are singly protonated.
S2−
+ H
2O {\displaystyle {\ce {<=>>}}}{\displaystyle {\ce {<=>>}}} SH−
+ OH−
(1)
SH−
+ H
2O {\displaystyle {\ce {<<=>}}}{\displaystyle {\ce {<<=>}}} H
2S + OH−
(2)
Sodium sulfide is unstable in the presence of water due to the gradual loss of hydrogen sulfide into the atmosphere.
When heated with oxygen and carbon dioxide, sodium sulfide can oxidize to sodium carbonate and sulfur dioxide:
2 Na2S + 3 O2 + 2 CO
2 → 2 Na2CO3 + 2 SO2
Oxidation with hydrogen peroxide gives sodium sulfate:[6]
Na2S + 4 H2O2 → 4 H
2O + Na2SO4
Upon treatment with sulfur, polysulfides are formed:
2 Na2S + S8 → 2 Na2S5
Uses
Sodium sulfide is primarily used in the kraft process in the pulp and paper industry.
It is used in water treatment as an oxygen scavenger agent and also as a metals precipitant; in chemical photography for toning black and white photographs; in the textile industry as a bleaching agent, for desulfurising and as a dechlorinating agent; and in the leather trade for the sulfitisation of tanning extracts. It is used in chemical manufacturing as a sulfonation and sulfomethylation agent. It is used in the production of rubber chemicals, sulfur dyes and other chemical compounds. It is used in other applications including ore flotation, oil recovery, making dyes, and detergent. It is also used during leather processing, as an unhairing agent in the liming operation.
Reagent in organic chemistry
Alkylation of sodium sulfide give thioethers:
Na2S + 2 RX → R2S + 2 NaX
Even aryl halides participate in this reaction.[7] By a broadly similar process sodium sulfide can react with alkenes in the thiol-ene reaction to give thioethers. Sodium sulfide can be used as nucleophile in Sandmeyer type reactions.[8] Sodium sulfide reduces1,3-dinitrobenzene derivatives to the 3-nitroanilines.[9] Aqueous solution of sodium sulfide can be refluxed with nitro carrying azo dyes dissolved in dioxane and ethanol to selectively reduce the nitro groups to amine; while other reducible groups, e.g. azo group, remain intact.[10] Sulfide has also been employed in photocatalytic applications.[11]
Explanation:there you go
When sodium combines with sulphur, it formed sodium sulphide. When it interacts with sulfur, polysulfides are produced. Additionally, heat causes sodium sulfide to oxidize fast. Sulfur dioxide and sodium carbonate are the end products.
What is sulphur ?Chemical element sulfur has the letter S and atomic number 16. It is multivalent, nonmetallic, and plentiful. Sulfur atoms normally combine to create cyclic octatomic molecules, which have the chemical formula S₈.
At room temperature, elemental sulfur is a crystalline solid that is brilliant yellow. It is employed in the production of fertilizer, water treatment, mineral extraction, oil refining, and automobile batteries.
Other uses for compounds based on sulfur include vulcanizing rubber, bleaching paper, and producing goods like cement, detergents, and insecticides.
Thus, When sodium combines with sulphur, it formed sodium sulphide.
To learn more about sulphur follow the link;
https://brainly.com/question/19511790
#SPJ6
Which answer best describes what is happening in the following redox reaction?
4Fe + 302.
2Fe2O3
Answer:
Iron is oxidized to form rust.
Explanation:
Consider the reaction; 4Fe + 302------>2Fe2O3, we can see that iron is being oxidized to iron III oxide. Rust is the common name of iron III oxide.
Rusting is an electrochemical process, iron rusts when it comes into contact with air and water because electrochemical cells are set up at the surface of contact.
Iron usually functions as the anode in the electrochemical process. This process leads to the formation of iron III oxide. Rust is soft and breaks off easily thereby exposing the metal below the surface to further rusting.
Answer:
Iron is oxidized to form rust.
Explanation:
edge
Question 28 (2 points)
Which of the following is part of the Kinetic Molecular Theory?
1) gases consist of tiny particles that are close together
2) gas molecules are in constant random motion
3) Il of the above are part of the Kinetic Molecular Theory
4) the average kinetic motion of gas molecules decreases with an increase in
temperature
Marook nie
Answer:
Il of the above are part of the Kinetic Molecular Theory
Explanation:
Answer: Which of the following are part of kinetic-molecular theory?
Choices:
1. The particles in a solid do not move.
2. The particles in a liquid are moving past one another constantly.
3. The particles in gas move freely in all directions.
4. The particles in a solid vibrate in a fixed position.
5. The particles in a solid are far apart.
6. The particles in a gas have few attractions between them.
7. The particles in all states of matter are always moving.
Explanation: Which of the following are part of kinetic-molecular theory...
Answers:
2. The particles in a liquid are moving past one another constantly.
3. The particles in gas move freely in all directions.
4. The particles in a solid vibrate in a fixed position.
6. The particles in a gas have few attractions between them.
7. The particles in all states of matter are always moving.
Mendeleev's periodic table of elements was created in 1901.
O A. True
O B. False
Explanation:APΕX
In order to answer this question, you need to look around your immediate surroundings to find examples of rusting of iron or any other metal. i. What makes iron rust? ii. Why is the rusting of iron a problem? Give any 3 examples from daily life where rusting has been a disadvantage. iii. Suggest any two ways that can help prevent rusting of iron.
Answer:
(i) rusting is caused by the reaction of oxygen and water on the surface of metals(iron).
(ii) rusting of iron makes it weak and dangerous for buildings since their foundation is made of iron, rusting renders cars useless, rusting can cause accidents.
(iii) by galvanizing iron
and by coating it.
Explanation:
hope it helps .
Consider the unbalanced chemical equation HBr + B = BBr3 + H2. When
coefficients are added to balance the equation, which two substances will
have a coefficient of 2?
D A. H2
B. HBr
C. BBrg
D D B
Answer:
B and BBr3
Explanation:
1) 3HBr + B = BBr3 + H2 (double all equation because H2)
2) 6HBr + 2B = 2BBr3 + 3H2
Identify the following as an example of a physical or chemical. Olive oil, vinegar, salt, and pepper are shaken together together to make salad dressing
Answer:
Chemical Change
Explanation:
Mixing these elements together creates a chemical change
Making of a salad dressing is a physical change as there is no change in the chemical composition.
What is a physical change?
Physical changes are defined as changes which affect only the form of a substance but not it's chemical composition. They are used to separate mixtures in to chemical components but cannot be used to separate compounds to simpler compounds.
Physical changes are always reversible using physical means and involve a change in the physical properties.Examples of physical changes include melting,boiling , change in texture, size,color,volume and density.Magnetism, crystallization, formation of alloys are all reversible and hence physical changes.
They involve only rearrangement of atoms and are often characterized to be changes which are reversible.
Learn more about physical changes,here:
https://brainly.com/question/17931044
#SPJ2
What is the concentration of iodine molecules, I 2 in a solution containing 2.54g of iodine in 250 cm 3 of solution?
Answer:
) Molar concentration =1000*2.54/(127*250) ;since molarity=1000*W/M*V
=0.08 M here W=amount of solute in gm
M= molecular weight of solute
v=volume of solution in ml or cm3
2)% concentration (w/v) =(2.54/250)*100=1.016%
Explanation:
Zinc will displace copper from a solution of copper sulfate, and magnesium will displace zinc from a solution of zinc sulfate. Why can these displacement reactions be regarded as redox reactions? Write down a series of reactivity for these three metals, putting them in order of increasing reactivity.
Answer:
The displacement reactions are regarded as redox reactions because they involve the formal transfer of electrons from one chemical specie to the other
2) The series of reactivity of the metals in the order of increasing reactivity are;
Copper↓
Zinc↓
MagnesiumExplanation:
1) Redox (oxidation-reduction) reaction is a chemical reaction involving the loss and gain of electrons from one chemical species to another, where the chemical species that undergoes oxidation, loses electrons and is termed the reducing agent, while the other chemical species that undergoes reduction, gains electrons, and is termed the oxidizing agent
2) The redox reaction can being based on the affinity for electrons depends on the positions of the reactants in the electrochemical series as well as the chemical reactivity of the metals with zinc being a stronger reducing agent and more chemically reactive than copper and magnesium being a stronger reducing agent and more chemically reactive than zinc
Least reactive (Cu) < (Zn) < Mg Most reactive
Copper < Zinc < Magnesium.
pls help me 13 min left if you go past and not help are not mine
Answer:
mushroom
mold
spore cases
hyphae
fungus
A chemistry student in lab needs to fill a temperature-control tank with water. The tank measures 24.0 cm long by 21.0 cm wide by 13.0 cm deep.
In addition, as shown in the sketch below, the student needs to allow 2.0 cm between the top of the tank and the top of the water, and a round-bottom flask
with a diameter of 10.5 cm will be just barely submerged in the water.
Calculate the volume of water in liters which the student needs. Round your answer to the nearest 0.1 L. ol.2 cm
M
flask
OL
6
water
Answer:
The required volume of water the student needs is 4.9 litres of water
Explanation:
From the diagram related to the question, we have;
The dimensions of the tank are;
Length of tank = 24.0 cm = 0.24 m
Width of tank = 21.0 cm = 0.21 m
Depth of tank = 13.0 cm. = 0.13 m
Allowance provided between the top of the tank and the top of the water = 2.0 cm
Diameter of the round bottom flask, D = 10.5 cm = 0.105 m
Therefore, the radius of the round bottom flask, r = 0.105/2 = 0.0525 m
Therefore we have;
Depth of water in the tank = Depth of tank - Allowance provided between the top of the tank and the top of the water
∴ Depth of water in the tank = 13.0 - 2.0 = 11.0 cm = 0.11 m
Given that the flask is immersed in the water contained in the tank to raise the tank water level, we have;
Volume of water + Volume of flask in the tank = Length of tank × Width of tank × Depth of water in the tank
Volume of water + Volume of flask in the tank = 0.24 × 0.21 × 0.11 = 0.005544 m³ = 0.005544 m³× 1000 l/m³ = 5.544 l
The volume of the spherical flask = 4/3·π·r³ = 4/3·π·0.0525³ = 6.06×10⁻⁴ m³ = 6.06×10⁻⁴ m³ × 1000 l/m³ = 0.606 l
The required volume of water the student needs , V = Volume of water + Volume of flask in the tank - The volume of the spherical flask = 5.544 l - 0.606 l = 4.9 l.
Ammonia (NH3) reacts with oxygen to form nitrogen monoxide and water. All the materials involved in this reaction are gasses. 0.100 moles of each of the reactants are initially introduced to a 5.0-liter reaction vessel. a. What would be the quantity of each gas in the container upon completion of the reaction? b.What would be the partial pressure of each gas on the reaction vessel upon reaction completion if the temperature of the system is 105 degrees C? c. What is the total pressure of all the gases on the reaction vessel at 105 degrees C?
Answer:
a. 0.02 moles of NH₃, 0 moles of O₂, 0.08 moles of NO, 0.12 moles of H₂O
b. [tex]P_{NH_3}[/tex] = 12,576.5 Pa, [tex]P_{NO}[/tex] = 50,306.05 Pa, [tex]P_{H_2O}[/tex] = 74,459.1 Pa
c. The total pressure is 138,341.64 Pa
Explanation:
a. NH₃ + O₂ → NO + H₂O
The balanced chemical equation is first found to be
4NH₃ + 5O₂ → 4NO + 6H₂O
Therefore, we have;
4 moles of NH₃ reacts with 5 moles of O₂ to form 4 moles of NO and 6 moles H₂O
Dividing by the reactant with the highest number of moles which is 5 moles of oxygen gives;
4/5 moles of NH₃ reacts with 5/5 moles of O₂ to form 4/5 moles of NO and 6/5 moles H₂O
Which is the same as 4/5 moles of NH₃ reacts with 1 mole of O₂ to form 4/5 moles of NO and 6/5 moles H₂O
Multiplying by 0.100 gives;
0.1×4/5 moles of NH₃ reacts with 0.1 mole of O₂ to form 0.1×4/5 moles of NO and 0.1×6/5 moles H₂O
The quantity of each gas in the container upon completion of the reaction is therefore;
(0.1 - 0.1×4/5) = 0.02 moles of NH₃
0 moles of O₂
0.08 moles of NO
0.12 moles H₂O
b. Given that the temperature = 105°C, we have;
PV = nRT
P = nRT/V
Where:
n = Total number of moles = 0.02 + 0.08 + 0.12 = 0.22 moles
R = Universal gas constant = 8.3145 J/(mol·K)
T = Temperature = 105°C = 378.15 K
V = Volume = 5 litre = 0.005 m³
P = 0.22×8.3145×378.15/0.005 = 138,341.64 Pa
From Dalton's law of partial pressure, we have;
Partial pressure Pₓ = Xₓ × P
Where:
Xₓ = Mole fraction
Which gives for ammonia NH₃ with 0.02 moles;
Mole fraction = 0.02/0.22 = 1/11
[tex]P_{NH_3}[/tex] = 1/11 × 138,341.64 = 12,576.5 Pa
For the 0.08 moles of NO, we have
Mole fraction = 0.08/0.22 = 4/11
[tex]P_{NO}[/tex] = 4/11 × 138,341.64 = 50,306.05 Pa
For the 0.12 moles H₂O
P = 0.12×8.3145×378.15/0.005 = 74,459.1 Pa
Mole fraction = 0.12/0.22 = 6/11
[tex]P_{H_2O}[/tex] = 6/11 × 138,341.64 = 74,459.1 Pa
c. The total pressure = 12,576.5 Pa + 50,306.05 Pa + 74,459.1 Pa = 138,341.64 Pa.
Consider the word equation.
calcium hydroxide + hydrochloric acid → calcium chloride + water
Which is the corresponding formula equation?
A: CaCl2(1)→ Ca(s) + Cl2(g)
B: O CaO(s)+ H2O(1)>Ca(OH)2(aq)
C: NaOH(aq) + 2HCl(aq) → NaCl(aq) + 2H2O(1)
D: Ca(OH)2(S) + 2HCI(I) → CaCl2(aq) + 2H20(1)
The chemical equation for the given word equation is Ca(OH)[tex]_2[/tex](S) + 2HCI(I) → CaCl[tex]_2[/tex](aq) + 2H[tex]_2[/tex]0(1). Therefore, the correct option is option D.
Chemical equations are symbols or chemical formulas that depict a chemical reaction symbolically. With a plus sign separating the entities in the reactants and products, the reactant objects are listed on the left as well as the result entities are listed on the right.
An arrow indicating the reaction's direction points in the path of the products. The chemical formulas could be mixed, symbolic, or structural. The critical values of a stoichiometric figures are shown as coefficients beside the symbols as well as formulas of the various entities. The chemical equation for the given word equation is Ca(OH)[tex]_2[/tex](S) + 2HCI(I) → CaCl[tex]_2[/tex](aq) + 2H[tex]_2[/tex]0(1).
Therefore, the correct option is option D.
To learn more about Chemical equations, here:
https://brainly.com/question/28294176
#SPJ7
In general, atmospheric pressure is greatest near Earth's surface and ____ as you move upward away from sea level.
(decreaes
(doubles
(stays the same
(increaes
Complete the following ionic equation: [tex]Zn + 2Ag^{+} ---\ \textgreater \ ......... + ..........[/tex]
Answer: [tex]Zn+2Ag^+\rightarrow Zn^{2+}+2Ag[/tex]
Explanation:
Oxidation-reduction reaction or redox reaction is defined as the reaction in which oxidation and reduction reactions occur simultaneously and the number of electrons lost is equal to the number of electrons gained.
Oxidation reaction is defined as the reaction in which a substance looses its electrons. The oxidation state of the substance increases.
Anode : [tex]Zn\rightarrow Zn^{2+}+2e^-[/tex]
Reduction reaction is defined as the reaction in which a substance gains electrons. The oxidation state of the substance gets reduced.
Cathode : [tex]2Ag^++2e^-\rightarrow 2Ag[/tex]
Thus the complete ionic equation will be :
[tex]Zn+2Ag^+\rightarrow Zn^{2+}+2Ag[/tex]
how many grams of aluminum are required to produce 8.70 moles of aluminum chloride
Answer:
234.9 grams
Explanation:
Hope this helps
Predict the arrangement of the following substances in decreasing order of pH value Orange juice || Bitter gourd juice || Hydrochloric acid || Mineral water
Answer:
Mineral water> Bitter gourd juice> Orange juice> Hydrochloric acid
Explanation:
pH is referred to as the degree of acidity or alkalinity of a substance. The pH scale is arranged from 0-14. Substance with a pH of 0-6.9 are acid, a pH of 7 indicates neutrality while a pH of 8-14 indicates alkalinity.
Mineral water is usually slightly acidic with a pH between 5-6. The pH of bitter gourd juice is between 4.24-4.45. The pH of orange juice ranges between 3.3 to 4.2 lastly, the pH of hydrochloric acid is about 3.01.
The pH values itemized above informed the arrangement of decreasing pH values shown in the answer box.