Answer:
[tex]V_2=2.5m^3[/tex]
Explanation:
Hello!
In this case, according to the Charles' law as a directly proportional relationship between volume and temperature:
[tex]\frac{V_2}{T_2}=\frac{V_1}{T_1}[/tex]
Thus, in order to compute the final volume, V2, we obtain the following expression:
[tex]V_2=\frac{V_1T_2}{T_1}\\\\V_2=\frac{5m^3*300K}{600K}\\\\V_2=2.5m^3[/tex]
Best regards!
What does efficient mean in your own words
Answer:
llo
Explanation:
efficent: well orgainzed, completed with mimumin amount of effort
capable is the correct answer accept it surely
A human ear is shaped in a way that focuses sound.
A. True
B. False
the Solution is the answer A.True
what is the molarity of a solution with 130g of CoCl2 in 1/2 liter? (can you show the steps please)
Answer:
2M
Explanation:
M=mol/L
1. Find moles of CoCl2
mass of substance/molar mass = 130/129.833 = 1.001 mol
3. Substitute in molarity equation
M=(1.001/0.5)
M= around 2M
The molarity of a solution with 130g of CoCl2 in 1/2 liter is 2M
HOW TO CALCULATE MOLARITY:
The molarity of a solution can be calculated by dividing the number of moles of that substance by its volume:Molarity = no. of moles ÷ volumeFirst, we convert 130g of CoCl2 to moles as follows:Molar mass of CoCl2 = 129.84 g/molmoles = 130g ÷ 129.84g/molmoles of CoCl2 = 1molMolarity of CoCl2 solution = 1mol ÷ 0.5LMolarity of CoCl2 = 2MTherefore, the molarity of a solution with 130g of CoCl2 in 1/2 liter is 2M.
Learn more at: https://brainly.com/question/15948514?referrer=searchResults
Calculate the number of moles in 42.15g of magnesium carbonate.
Answer:
0.5mol
Explanation:
Please mark as brainliest
What is the phase label on CI?
A. aq
B.
C. e
D. g
E. s
Answer:
Pubic hair smells bad
Explanation:
Can the decay half-life of a radioactive material be changed?
Answer:
Yes.....
Explanation:
the decay half-life of a radioactive material can be changed. Radioactive decay happens when an unstable atomic nucleus spontaneously changes to a lower-energy state and spits out a bit of radiation. ... It is impossible to predict when an individual radioactive atom will decay.
Which of these is a carbohydrate?
1. C6 H12 O6
2. C6 H6 O12
3. C6 H13 O2 N
4. C3 H7 O2 Ns
Answer:
C6H12O6
Glucose
Explanation:
Glucose is a monocarbohydrate
carbohydrates always have only C, H, and O
brainliest plz
Each person in a room is assumed to be producing carbon dioxide at the average rate of 0.0107 cfm (5.0 ml/s) and air with a CO2 concentration of 280 ppm is being supplied to the room at the rate of 6000 cfm (2.8 m3/s). It is desired to keep the concentration level of CO2 in the space below 1000 ppm. Assuming complete mixing, determine how many persons could occupy the room and not exceed the desired CO2 level.
Answer:
404 persons
Explanation:
To get n= number of persons
We use this formula
n = I(Dc - EaC)Eaf
I = 6000 = inflow rate
Dc = desired concentration = 1000
Eac = Exhaled air concentration = 280ppm = 0.00028
Exhaled air flow rate = Eaf = 0.0107
When we put values into the formula above
6000(0.001-0.00028)/0.0107
= 6000(0.00072)/0.0107
= 4.32/0.0107
= 403.7
= 404 persons
For each of the following acid-base reactions,
calculate the mass (in grams) of each acid necessary
to completely react with and neutralize 3.65 g of the
base.
Part A
HCl(aq) + NaOH(aq) → H2O(l) + NaCl(aq)
Part B
2 HNO3(aq) + Ca(OH)2(aq)
2 H2O(1) + C
Answer: A. 3.28 g of HCl
B. 6.30 g of [tex]HNO_3[/tex]
Explanation:
To calculate the moles :
[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]
[tex]\text{Moles of} NaOH=\frac{3.65g}{40g/mol}=0.09moles[/tex]
[tex]\text{Moles of} Ca(OH)_2=\frac{3.65g}{74g/mol}=0.05moles[/tex]
a) [tex]HCl(aq)+NaOH(aq)\rightarrow H_2O(l)+NaCl(aq)[/tex]
According to stoichiometry :
1 mole of [tex]NaOH[/tex] require = 1 mole of [tex]HCl[/tex]
Thus 0.09 moles of [tex]NaOH[/tex] will require=[tex]\frac{1}{1}\times 0.09=0.09moles[/tex] of [tex]HCl[/tex]
Mass of [tex]HCl=moles\times {\text {Molar mass}}=0.09moles\times 36.5g/mol=3.28g[/tex]
b) [tex]2HNO_3(aq)+Ca(OH)_2(aq)\rightarrow 2H_2O(l)+Ca(NO_3)_2(aq)[/tex]
According to stoichiometry :
1 mole of [tex]Ca(OH)_2[/tex] require = 2 moles of [tex]HNO_3[/tex]
Thus 0.05 moles of [tex]Ca(OH)_2[/tex] will require=[tex]\frac{2}{1}\times 0.05=0.1moles[/tex] of [tex]HNO_3[/tex]
Mass of [tex]HNO_3=moles\times {\text {Molar mass}}=0.1moles\times 63g/mol=6.3g[/tex]
NH3(g) + O2(g) + CH4(g) → HCN(aq) + H20(l)
Answer:
2 NH3(g) + 3 O2(g) + 2 CH4(g) = 2 HCN(aq) + 6 H2O(l)
Explanation:
Reaction stoichiometry Limiting reagent
Compound Coefficient Molar Mass Moles Weight
NH3(g) 2 17.03052
O2(g) 3 31.9988
CH4(g) 2 16.04246
HCN(aq) 2 27.02534
H2O(l) 6 18.01528
Instructions on balancing chemical equations:
Enter an equation of a chemical reaction and click 'Balance'. The answer will appear below
Always use the upper case for the first character in the element name and the lower case for the second character. Examples: Fe, Au, Co, Br, C, O, N, F. Compare: Co - cobalt and CO - carbon monoxide
To enter an electron into a chemical equation use {-} or e
To enter an ion specify charge after the compound in curly brackets: {+3} or {3+} or {3}.
Example: Fe{3+} + I{-} = Fe{2+} + I2
Substitute immutable groups in chemical compounds to avoid ambiguity.
For instance equation C6H5C2H5 + O2 = C6H5OH + CO2 + H2O will not be balanced,
but PhC2H5 + O2 = PhOH + CO2 + H2O will
Compound states [like (s) (aq) or (g)] are not required.
If you do not know what products are enter reagents only and click 'Balance'. In many cases a complete equation will be suggested.
Reaction stoichiometry could be computed for a balanced equation. Enter either the number of moles or weight for one of the compounds to compute the rest.
Limiting reagent can be computed for a balanced equation by entering the number of moles or weight for all reagents.
The given chemical equation is already balanced and does not require any further balancing.
The chemical equation NH₃(g) + O₂(g) + CH₄(g) → HCN(aq) + H₂O(l) is already balanced because the number of atoms of each element is the same on both sides of the equation.
On the left side of the equation, there is 1 nitrogen (N) atom in NH₃ and 1 nitrogen (N) atom in HCN.
On the right side of the equation, there are 3 hydrogen (H) atoms in NH₃, 2 hydrogen (H) atoms in HCN, and 2 hydrogen (H) atoms in H₂O.
There are 3 oxygen (O) atoms in O₂ on the left side of the equation and 1 oxygen (O) atom in H₂O on the right side of the equation.
Finally, there is 1 carbon (C) atom in CH₄ on the left side of the equation.
Since the number of atoms of each element is balanced on both sides of the equation, we can conclude that the given equation is already balanced and does not require any further adjustments or coefficients.
To learn more about balanced equation, here
https://brainly.com/question/31242898
#SPJ2
The complete question is:
How can I balance NH₃(g) + O₂ (g) + CH₄ (g) -> HCN (aq) + H₂O (l)?
21.Total mass of reactants always equals the total mass of the products true or false
Answer:
True
Explanation:
because its the law of conservation of mass
Describe the critical property ofelectrons in 2s versus 2p orbitals that causes the radial distribution functions of these orbitals to have different shapes about the nucleus such that 2s electrons effectively penetrate closer to the nucleus than do electrons in 2p orbitals.Then, write an expression for the potential energy function describing this effect.
Answer:
Answer is explained in the explanation section below.
Explanation:
Penetration refers to the proximity of electrons in an orbital to the nucleus.
Deeper-penetrating electrons have less shielding and therefore a higher Effective nuclear charge (Zeff), but they better shield other electrons.
To illustrate penetration, we may use the idea of Zeff, or effective nuclear charge. It's actually the difference between the number of charged protons and the number of shielded electrons. To put it another way, how effective the nucleus is at attracting electrons. Since they do not shield themselves, the core electrons penetrate the most and are exposed to the most strong nuclear charge.
The electron probability density is highest in the orbital's centre or nucleus for 28-orbitals.
In a multi-electron unit, the electron density near the nucleus of an atom for each shell and subshell of an electron is used to measure the nucleus penetration by an electron.
Since it has a higher electron density near the nucleus, the 2s electron penetrates the nucleus of the atom more than the 2p electron.
A 2s electron is less well shielded by the core electrons than a 2p electron because it can spend more time near the nucleus as a result of the penetration.
Mathematical Expression:
v = [tex]\frac{-Zeff * e^{z} }{r^{2} }[/tex]
How many K3PO4 are in the equation below after it is correctly balanced?
K3PO4 +
HCI -->
KCI +
H3PO4
Answer:
1 K3PO4 +3 HCI -->3 KCI +1 H3PO4
Explanation:
K3PO4- 1
Which of these is a pair of coordination isomers (aka ionization isomers)?
a. Na2[NiBr2Cl2] and K2[NiBr2Cl2]
b. [Ni(NH3)3Br]Cl and [Ni(NH3)3Cl]Br
c. [Ni(NH3)3(H2O)]SO4 and [Ni(NH3)2(H2O)2]SO4
Which of these pairs are linkage isomers??
a. [Pt(Cl)2(SCN)4]^4- and [Pt(Cl)2(NCS)4]^4-
b. [Pt(Cl)2(SCN)4]^4- and [Pt(Cl)4(SCN)2]^4-
c. K4[Pt(Cl)2(SCN)4] and Na4[Pt(Cl)2(SCN)4]
Answer: [tex][Ni(NH_3)_3Br]Cl[/tex] and [tex][Ni(NH_3)_3Cl]Br[/tex] are ionization isomers.
[tex][Pt(Cl)_2(SCN)_4]^{4-}[/tex] and [tex][Pt(Cl)_2(NCS)_4]^{4-}[/tex] are linkage isomers.
Explanation:
Ionization isomerism occur when a ligand that is bound to the metal center exchanges places with an anion or neutral molecule that was originally outside the coordination complex
Thus [tex][Ni(NH_3)_3Br]Cl[/tex] and [tex][Ni(NH_3)_3Cl]Br[/tex] are ionization isomers.
Linkage isomerism is the existence of coordination compounds that have the same composition differing with the connectivity of the metal to a ligand.
Thus [tex][Pt(Cl)_2(SCN)_4]^{4-}[/tex] and [tex][Pt(Cl)_2(NCS)_4]^{4-}[/tex] are linkage isomers.
I am an element that has 4 valence electrons that are present in my third energy level. Who am I?
Answer:
silicone (Si) is the answer
Convert 1.55 x 10^24 ATOMS OF CARBON TO MOLES OF CARBON
Answer:
2.57 moles of carbon
Explanation:
1 mole = 6.023x10^23 (this is called avogadro's number)
1/6.023x10^23
1.55x10^24 = 1.55x10^24/6.023x10^23 = 2.57 moles
this means, 1.55x10^24 atom contains 2.57 moles of carbon
HELP I DON'T HAVE TIME LEFT
Answer:
mass
Explanation:
Answer:
C Mass
Explanation:
mass wont change when a force is put upon it.
elements have similar characteristics?
Periodic TaBle
oF The Elements
Answer:
See attachment.
Explanation:
Elements that are in the same group will definitely possess similar characteristics because they tend to have the same valence electron which determines their reactivity.
On a periodic table, elements in the same group can be found arranged on the same column in the periodic table.
Therefore the two elements that have similar characteristics are those two elements you can see on the same column in group 2. See the two elements indicated in the attachment below.
The bond angles around a carbon in a
triple bond are
and it
is
hybridized
A. 180, sp?
B. 120, sp
C. 180, sp
D. 120, sp?
Enter
The bond angles around carbon in the triple bond are 180 degrees and it is sp hybridized. option B is correct
What is sp hybridization?This hybridization process involves mixing the valence s orbital with one of the valence p orbitals to yield two equivalent sp hybrid orbitals that are oriented in a linear geometry.
The set of sp orbitals appears similar in shape to the original p orbital, but there is an important difference. The number of atomic orbitals combined always equals the number of hybrid orbitals formed.
The p orbital is one orbital that can hold up to two electrons. The sp set is two equivalent orbitals that point 120° from each other. The two electrons that were originally in the s orbital are now distributed to the two sp orbitals, which are half filled.
Therefore, due to the sp hybrid and 120-degree angle option B is correct
learn more about hybridization, here :
https://brainly.com/question/23038117
#SPJ2
Why didn't you just clean the spill with water?
Answer:
if you did it would probably make it bigger...
Explanation:
:)
Why doesn't all soil look and feel the same? List 3 reasons
Answer:
all soil are also different due to how they were form
What kinds of matter have thermal energy
Answer:
Thermal energy comes from heat sources that provide energy from it's temp.
Explanation:
Produced when a rise in temperature causes atoms and molecules to move faster and collide with each other. The energy that comes from the temperature of the heated substance is called thermal energy. 6 min, 47 sec Heat Energy.
(If this doesn't help let me know in the comments, I'll try to explain better :> )
A new substance with unique chemical and physical properties formed when two or more elements are chemically bonded during a physical reaction.
Answer:
A compound
Explanation:
Chemical compound can be regarded as any substance made up of identical molecules which consists atoms of two or more than two chemical elements. For example four hydrogen atoms bonds with a carbon atom to give methane molecule which is a compound. It should be noted that A compound is a new substance with unique chemical and physical properties formed when two or more elements are chemically bonded during a physical reaction.
What is the electron configuration for
beryllium (atomic number = 4)?
А
B
1s22s
2.
2s22p
2
Answer:
1s22s2
Explanation:
when 4.73g of solid was heated, the residue weighed 4.10g 320 cubic centimetre of gas( at RTP) was evolved. calculate the molecular mass of the gas
Answer:
48 g/mol
Explanation:
Step 1: Calculate the mass of the gas (m)
According to the law of conservation of mass, the mass of the solid before the decomposition must be equal to the sum of the masses of the solid residue and the gas
mSolid = mResidue + mGas
mGas = mSolid - mResidue = 4.73 g - 4.10 g = 0.63 g
Step 2: Convert 320 cm³ to L
We will use the conversion factor 1 L = 1000 cm³.
320 cm³ × 1 L/1000 cm³ = 0.320 L
Step 3: Calculate the moles of gas (n)
The gas is at room temperature (298.15 K) and room pressure (1 atm). We can calculate the moles of gas using the ideal gas equation.
P × V = n × R × T
n = P × V/R × T
n = 1 atm × 0.320 L/(0.0821 atm.L/mol.K) × 298.15 K = 0.0131 mol
Step 4: Calculate the molecular mass of the gas (M)
We will use the following expression.
M = m/n = 0.63 g/0.0131 mol = 48 g/mol
Air in a closed cylinder is heated from 15°C to 36°C. If the initial pressure is 1000 torr, determine what is the final pressure? *
Answer:
1072 torr
Explanation:
To answer this problem we can use Gay-Lussac's law, which states:
P₁T₂=P₂T₁Now we convert the given temperatures into K:
T₁ = 15°C ⇒ 15+273.16 = 288.16 KT₂ = 36°C ⇒ 36+273.16 = 309.16 KWe input the data:
1000 torr * 309.16 K = P₂ * 288.16 KAnd solve for P₂:
P₂ = 1072 torrWhat season is represented in the northern hemisphere? *
5 points
Captionless Image
A. Spring
B. Summer
C. Fall
D. Winter
Answer:
B. summer
Explanation:
The northern hemisphere experiences summer during the months of June, July, and August because it is tilted toward the sun and receives the most direct sunlight.
9. During which phase of Mitosis does the Cell start to get ready to divid
Prophase
O Metaphase
Anaphase
Telophase
Hello,
QUESTION)TelephaseDuring telophase, the cell, each pole of which inherits the same number of single chromosomes, begins to divide into 2: this is cytodieresis.
Help please it’s due in 3 minutes
Answer:
A
Explanation:
Both students are Pushing/Pulling towards the same direction meaning if enough force is applied the object will move into that direction
A student performed a similar experiment we have done, with Ag and O to produce silver oxide.
Mass of crucible and lid: 29.307 g
Mass of crucible, lid, and silver: 30.958 g
Mass of crucible, lid, and silver oxide: 31.080 g
Use the above data to calculate the moles of the metal used in this experiment. your answer must include correct significant figures and unit.
Answer:
0.0153 mol
Explanation:
Mass of crucible and lid: 29.307 g
Mass of crucible, lid, and silver: 30.958 g
Number of moles = Mass /Molar mass
Mass of Silver = Mass of crucible, lid, and silver - Mass of crucible and lid
Mass of siilver = 30.958 g - 29.307 g
Mass of silver = 1.651 g
Molar mass of silver = 107.868 g/mol
Number of moles = 1.651 g / 107.868 g/mol
Number of moles = 0.0153 mol