a gas mixture contains rn, he and n2. what is the total pressure of the mixture, if the mole fraction of n2 is 0.300 and the partial pressure of n2 is 0.520 atm?

Answer:

Explanation:

Poison is a toxin that gets into the body by inhaling, swallowing, or absorption through the skin. Venomous: it's when the toxin is injected into you.

The concept of rising hot water applies to water heaters, which might be vertical or horizontal vent ducts. Air exhaust from water heaters should be removed. The gas fumes are not necessary for the vents.

Water heaters need to be vented outside since the exhaust gas needs to leave the heaters and the vent runs right through their walls. In order to avoid potentially harmful effects, the residual gas fumes must be evacuated out through the vent pipes while the fuel is being burned. The vents can be run horizontally to the outside of the house and do not depend on hot air's buoyancy. As a result, the edifices from the hot water vent have an edifice-like appearance and are constructed of insulators and polymers.

Learn more about gas here

https://brainly.com/question/14812509

#SPJ4

At standard temperature and pressure, the number of gaseous molecules in the flask is 9.409 × [tex]10^{22}[/tex] and the number of moles in the flask is 0.1562 moles.

The International System of Units uses the term "mole" (symbol: mol) to denote the amount of a substance . The quantity of a substance is a measurement of the number of elementary entities of a specific substance present in an object or sample. Exact 6.02214076 × [tex]10^{23}[/tex]elementary items are required to define a mole.

Calculations:

The volume of the flask = 3.5 L

At STP gas occupy 22.4 L volume.

Number of moles in the flask,

n = 3.5/22.4

n = 0.1562 mol.

As we know 1 mole =  6.02214076 × [tex]10^{23}[/tex]

The number of gaseous molecules in the flask will be,

= 1.562 × 6.02 × 10²³

= 9.409 × 10²²

Hence, at standard temperature and pressure, the number of gaseous molecules in the flask is 9.409 × [tex]10^{22}[/tex] and the number of moles in the flask is 0.1562 moles.

To know more about moles, check out:

https://brainly.com/question/15356425

#SPJ4

The equation PV=nRT from the ideal gas law can be used to calculate the sample pressure. Use the conversion factor 1 atm = 760 torr to find the pressure in torr. You'll get 34,877 Torr as a result.

the ideal gas law equation is used to determine the pressure of the sample.

PV=nRT, where

P - the pressure of the hydrogen sample

V - the volume it occupies

n- the number of moles of gas;

R- the universal gas constant, usually given as  0.082atm⋅L/mol⋅K

T- the temperature of the gas - expressed in Kelvin

So, rearrange the ideal gas law equation to solve for

P, the pressure of the gas.

P=nRTV

Put in your values and find

P - do not forget that you need to use the volume in liters and the temperature in Kelvin

P=9.94 x 10^3 mol ⋅0.082atm⋅L/mol⋅K⋅(273.15−199)K/1.3L

P=3.4877  atm

To get the pressure in torr, you need to use the conversion factor

1 atm = 760 torr

This will get you

3.4877atm⋅760 torr/1atm=34,877torr

Gases come in two varieties. Gases that are ideal and real. Given that an ideal gas has very small particles, nearly negligible mass, and no volume A point mass is also referred to as an ideal gas. Real gas molecules, despite being small particles with volume, occupy space.

One equation, developed through the experimental work of many people, particularly Robert Boyle, Jacques A. C. Charles, and Joseph Gay-Lussac, relates the pressure, volume, temperature, and amount of an ideal gas.

Learn more about pressure here:

https://brainly.com/question/356585

#SPJ4

The concentration of h2so4 when 12.3 ml of 0.200 m naoh solution is needed to neutralize 10.0 ml of h2so4 solution is 0.123 M.

What is solution?

In chemistry, a solution is a homogeneous mixture of two or more compounds in their relative proportions that can be continually altered up to what is referred to as the limit of solubility. Although the word "solution" is frequently used to refer to the liquid state of matter, solutions of gases and solids are also possible.

Solutions come in many forms, such as sugar and salt solutions, soda water, etc. In a solution, each element appears as a separate phase.

The answer is 0.123 M because the molarity of a solution can be determined using the following equation:

Molarity = (moles of solute) / (volume of solution in liters)

For this problem, you need to calculate the moles of H2SO4 in 10.0 ml of the solution. To do that, you need to convert the volume to liters first. 10.0 ml = 0.010 L. Now, you can calculate the moles of H2SO4:

Moles of H2SO4 = (Molarity of H2SO4) x (0.010 L)
Moles of H2SO4 = 0.123 M x 0.010 L = 0.00123 moles

Now, you can calculate the molarity of the H2SO4 solution using the same equation as before:
Molarity of H2SO4 = (0.00123 moles) / (0.010 L)
Molarity of H2SO4 = 0.123 M

To learn more about solution

Here: https://brainly.com/question/11337199

#SPJ4

The answer is:

Halogens such as F2 and Cl2

Hydrogen gas

Nitrogen and oxygen

Diatomic elements are seven unique molecules that are composed of two atoms. All of the elements in this elite group are gases. If we look at the prefix 'di-' in the word diatomic, it comes from the Greek origin of 'two.' Every molecule has its own unique molecular formula, and for diatomic elements, their formula always contains a subscript of 2, which represents two atoms in its structure. As an example, the diatomic element oxygen has a formula of [tex]O_{2}[/tex], meaning there are two separate oxygen atoms present.

Learn more about diatomic elements here :

https://brainly.com/question/11815815?referrer=searchResults

#SPJ4

The answer is

1. Glycolysis produces pyruvate.

2. Pyruvate dehydrogenase catalyzes the oxidation of pyruvate kinase

3. Decarboxylation of pyruvate to yield carbon dioxide and acetyl CoA.

4. Acetyl CoA is the main form in which carbon compounds enter the

citric acid cycle.

What is Glycolysis?

Glycolysis is the process in which glucose is broken down to produce energy. It produces two molecules of pyruvate, ATP, NADH, and water. The process takes place in the cytoplasm of a cell and does not require oxygen. It occurs in both aerobic and anaerobic organisms.

Learn more about glycolysis here :

https://brainly.com/question/14076989?referrer=searchResults

#SPJ4

In order for 0.36 mol of lead to totally react, 0.72 mol of Hydrochloric acid is required.

In the food, textile, metal, or rubber sectors, hydrogen chloride (HCl) is frequently employed as a bleaching agent to neutralize alkaline substances. When discharged into the soil, it is neutralized, and when it comes into contact with water, it hydrolyzes quickly.Low concentrations exposed over an extended period of time may damage and stain teeth. The EPA has not rated the carcinogenicity of hydrochloric acid.

Chemical burns from hydrochloric acid can be extremely painful if they come into contact with epidermis or other tissues. Ingestion of hydrochloric might result in blindness. The amount of acid present determines how severe the burns.

To know more about hydrochloric acid visit:

https://brainly.com/question/14006357

#SPJ4

A titration of 15 mL of NaOH requires 10.50 mL of 0.450 M H₂SO₄ . the molarity of NaOH solution is 0.53 M

The reaction is given as :

H₂SO₄   +    2NaOH    ----->    Na₂SO₄  +  2H₂O

molarity of H₂SO₄ = 0.450 M

volume = 10.50 mL = 0.01050 L

moles of H₂SO₄ = molarity × volume

                           = 0.450 × 0.0105

                           = 0.004 mol

moles of H₂SO₄ = 2 moles of NaOH

moles of NaOH = 2 × 0.004

                          = 0.008

molarity of NaOH = 0.008 / 0.015

                              = 0.53 M

The molarity of the NaOH solution with volume 15 mL is 0.53 M.

To learn more about molarity here

https://brainly.com/question/24195935

#SPJ4

The mass loss of the nucleus emission of this gamma ray is 1.5 × 10⁻⁴ amu.

given that :

the energy = 140 keV 140000 eV

the energy and mass expression is given as :

e = m c²

where,

m = mass

c , speed of light = 3 × 10⁸ m/s

m = e / c²

m = e / 931.4 × 10⁶ amu

m = 140000 / 931.4 × 10⁶ amu

m = 1.5 × 10⁻⁴ amu

Thus, Medical gamma imaging is most often done with the technetium isotope 99tc, which decays by emitting a gamma-ray photon with energy 140 kev.  the mass loss of the nucleus upon emission of this gamma ray  in amu is 1.5 × 10⁻⁴ amu.

To learn more about gamma rays here

https://brainly.com/question/4443370

#SPJ4

The number of moles of HF needed to react with 0.3 mol of Na₂SiO₃ is 0.24 moles.

The given reaction is,

Na₂SiO₃ (s)+HF (aq) -----> H₂SiF₆ (aq)+NaF (ag)+H₂O (l). This equation is to be balanced at first which is given by,

Na₂SiO₃+8HF-----> H₂SiF₆+ 2NaF + 3H₂O

In addition to that, the number of moles of Na₂SiO₃ given is 0.300 moles.

It can be clearly seen from the reaction that 1 mole of Na₂SiO₃is needed to react with 8 moles of HF. Therefore,

0.300 mol of Na₂SiO₃ will need the following amount of HF,

                                = 8x0.3

No of moles of HF = 0.24 mole of HF

Therefore, the 0.24moles of HF is required to react with 0.300 moles of NaSiO3.

In this way, the number of moles required could be computed easily.

To know more about stoichiometry calculations, click below:

https://brainly.com/question/16060223

#SPJ4

The exact volume of peroxide is needed to be added because it is helpful in knowing about the concentration of the analyte similarly water also should be added knowing its exact volume as it improves the accuracy of the answer required.

a) It is important to know the exact volume of peroxide to be added to the flask in order to ensure that the correct amount of peroxide is used in the reaction and that the reaction has the desired outcome.

By knowing the exact volume of peroxide, the chemist can also ensure that there is no excess peroxide that could cause a dangerous reaction. Additionally, if the correct amount of peroxide is not used, the reaction may not occur correctly or may yield unwanted products. Knowing the exact volume of peroxide also helps the chemist control the reaction rate and the desired product yields. Finally, using the correct amount of peroxide can help prevent contamination of the reaction mixture.

b) It is necessary to know the exact volume of water to be added to the flask for a number of reasons. First, accurate measurement of volume helps to ensure the accuracy of the results from the experiment. If too much or too little water is added, it can skew the results or cause the experiment to fail.

Second, the volume of water will affect the rate of temperature change. If too little or too much water is added, the temperature change may not be as dramatic as desired, or it may take too long to reach the desired temperature.

Finally, the volume of water will affect the amount of energy required to heat the water up. If too much water is added, it can take a long time and require a lot of energy to heat the water to the desired temperature. Knowing the exact volume of water to be added to the flask is critical to ensure the experiment is successful and the results are accurate.

To know more about titration, click below:

https://brainly.com/question/186765

#SPJ4

Answer:

it would be answer (B)

Explanation:

The ideal gas equation is PV = nRT, The pressure A =B.

Equimolar quantities of salts are taken for double salts education due to the fact the houses of the character cation or anion does no longer alternate in double salts while dissociates and if salts are not in equimolar then they could get precipitate.

An equimolar buffer is one in which the concentration of the susceptible acid (or base) is the same as the concentration of the conjugate ion.

Quantities in chemistry are commonly expressed as moles; whereas concentrations use the time period molar. A mole of some thing is the molecular weight for the compound expressed as grams.

case I

n= same , T= same , V= same Thus

i) pressures  A =B

ii) rmas speed is given by u = (3RT/M)1/2

Thus A with higher molar mass has less rms speed

 A< B

iii) average kinetic energy depends only on temperature (Average Kinetic energy = 3/2 RT)

Thus A =B as they are at same temperature

Case II

C and D are at

 n= same , M = same , V= same T(C) > T(D)

i) pressures   C>D  as P is proportional to T

ii) rms speed

 C>D as rms velocity is proportional to T

iii) average kinetic energy  C >D

Case III

n = same M = same , T = same , V of E >F

i) pressures E<F as P is inversely proprtional to V

ii) rms speed  E =F at same temperature

iii) average kinetic energy E =F

Learn more about equimolar samples here:-https://brainly.com/question/24188709

#SPJ4

Disclaimer:- your question is incomplete, please see below for the complete question.

consider equimolar samples of different ideal gases at the same volume and temperature. gas a has a higher molar mass than gas b. compare the pressures. a>b a

Zn(s) + Pb(NO3)2,(aq)⇄ Zn(NO3)2,(aq) + Pb(s) is the chemical reaction that occurs between the two reacting species. include physical states.

One or more chemicals (the reactants) transform into one or more new substances through a chemical reaction (the products). Chemical parts or chemical elements make up substances. In a chemical reaction, the atoms that make up the reactants are rearranged to produce various products.

Chemical reactions are vital to life itself, as well as to technology and culture. The burning of fuels, the smelting of iron, the creation of glass and pottery, the brewing of beer and wine, and the making of cheese are a few instances of ancient processes that entailed chemical reactions. The Earth's geology, atmosphere, oceans, and a variety of intricate processes that take place in all living systems are rife with chemical reactions.

To know more about  chemical reactions visit : https://brainly.com/question/29039149

#SPJ4

As the RF (resonance frequency) increases, the polarity of the molecule increases as well.

Polarity is a measure of the separation of charges in a molecule. The higher the polarity, the greater the separation of charges.  This is because the higher the frequency, the more energy is transferred to the molecule, which increases the charge separation and therefore the polarity.

As the RF (resonance frequency) increases, the polarity of the molecule increases as well. This is because the higher the frequency, the more energy is transferred to the molecule, which increases the charge separation and therefore the polarity.

The increase in polarity is due to the increased energy being transferred to the molecule as the frequency increases. As the energy is absorbed, the electrons in the molecule are pulled further apart, increasing the separation of the positive and negative charges and thus increasing the polarity of the molecule. This increased polarity can be seen in the increased strength of intermolecular forces, leading to an increase in the boiling and melting points of the molecule.

To know more about polarity, click below:

https://brainly.com/question/545359

#SPJ4

The correct answer is

atmospheric stability and wind conditions control the vertical and horizontal dispersion of pollutants.

What is meant by atmospheric stability?

Atmospheric stability is a measure of atmospheric status which determines whether or not air will rise, sink, or be neutral. In general, stability refers to air tendency to rise or to resist vertical motion.

Three Types of Stability

1. An unstable atmosphere will enhance or encourage the vertical movement of air.

2. A stable atmosphere will suppress or resist vertical motion.

3. A neutral atmosphere will neither suppress nor enhance vertical motion.

Learn more about atmospheric stability here :

https://brainly.com/question/4553502?referrer=searchResults

#SPJ4

Solutions that contain water as the solvent are known as aqueous solutions.

A liquid that dissolves another chemical to produce a homogenous mixed solution is known as a solvent. Based on its physiochemical, the solvent, which comprises the majority of something like the liquid, determines why a substance will assume the shape of a solid, liquids, or gas.

Solvents are a group of heterogeneous compounds that can be used to weaken, disintegrate, or distribute other molecules. The ability of a solvent to dissolve another molecular depends on the chemical composition and physical traits of both the solvent and the solute.

To know more about solvent visit :

https://brainly.com/question/14797683

#SPJ4

The concentration of A is 0.417 mg/ml.

Response factor (F) for compound "A" with response to "B" is

(Area) A / [A] = F x (Area) B / [B]

10.86 / 1.03 = F x 4.37 / 1.16

F = 2.799

Now, unknown solution has 12.49 mg of B

Final conc. of B = 12.49 mg / 25 ml = 0.4996 mg/ml

Let conc. of A = x mg / ml

Final conc. of A = 10ml / 25ml . x mg / ml

=0.4 c mg /ml

Now (Area) A = 5.97, (Area) B = 6.38

5.97 / 0.4 x = 2.799 . 6.38 / 0.4996

x = 0.417 mg/ml

Solution, in chemistry, a homogenous mixture of  or more materials in relative amounts that may be varied continuously up to what's referred to as the restrict of solubility. The term solution is typically implemented to the liquid nation of count number, but solutions of gases and solids are feasible.

Let us find out in this text. As a protracted as a liquid is made of a single substance, it remains pure and is known as a liquid. While something is added to it, it will become a solution.

Learn more about solution here:- https://brainly.com/question/25326161

#SPJ4

For a real gas to approach the properties of an ideal gas, the pressure should be low, the attraction between the molecules should be high, and temperature should be high.

Ideal gas conditions are:

         PV =nRT

The real gas conditions are:

       (P +αn²) (V - nb) = nRT

             V²

Thus, real gases behave ideally at high temperatures and low pressures.

To know more about gases visit:

brainly.com/question/12554034

#SPJ4

If you mix 100 g of ice at 0.00°c with 60 g of water at 60 °c, then 60 g of ice has melted. The water is cooled to 0.00°c as some of the ice melts. The ice also melted.

Ice has a melting point of 0°C, or 273K. Tungsten, which is used to create the filaments in light bulbs, is the chemical element with the highest melting point (3410°C). The temperature of the system does not rise during the melting process until after the melting point has been reached, even after all the ice has melted. Water is the primary component of the Earth's hydrosphere and the fluids of all known living things. It is an inorganic chemical with the chemical formula H2O(water) and is transparent, tasteless, odourless, and almost colourless.

H = MS(deltaT) (deltaT)

H = 100*4.184*(60-0)

H = 25104J

Now, the amount of heat needed to melt ice to 0 degrees Celsius is given by the formula delta H = 100*2.108 = 421.6J m = 24682.4/40.7*10^3 = 0.606g.

Ice melted to a total of 0.606g.

Learn more about melting here

https://brainly.com/question/29578567

#SPJ4

The correct ones are:

Long-term potentiation (LTP) is a process that involves the continuous strengthening of synapses, resulting in a long-term increase in signal transmission between neurons. It is a critical step in the process of synaptic plasticity. LTP recording is widely accepted as a cellular model for memory research.

Simple tasks can be taught to rats and mice. A mouse, for example, will swim around in a pool of murky water until it finds a hidden platform to climb out on. Long-term potentiation (LTP) of synaptic strength between hippocampal neurons is linked to learning and memory, and memory loss is thought to be caused by LTP dysfunction. LTP can be divided into two types: decaying (early-phase) LTP and nondecaying (late-phase) LTP.

To learn more about long-term potentiation, here

https://brainly.com/question/25677408

#SPJ4

Saltation Since Deflation: removing and raising loose sand Blowout: powerful onshore winds create parabolic dunes Saltation is the term for the bouncing motion of sand grains caused by fluids like wind or water. Deflation: wind-driven sandblasting.

The term "deflation" refers to a drop in asset prices or overall prices for products and services. When prices decrease, the phenomenon is referred to as deflation or a negative inflation rate. As prices fall, consumers' purchasing power rises, allowing them to spend the same amount of money on a greater variety of goods and services.

The word saltation comes from the Latin word saltare, which means to leap or jump. Although the distinctiveness of saltation in water is not nearly as evident as in air, movement by saltation has also been suggested for water transport of particles towards the bed.

To more about saltation here:

brainly.com/question/2588788

#SPJ4

sp hybridization is observed when one s and one p orbital in the same main shell of an atom mix to form two new equivalent orbitals. The new orbitals formed are called sp hybridized orbitals. It forms linear molecules with an angle of 180°

-This type of hybridization involves the mixing of one ‘s’ orbital and one ‘p’ orbital of equal energy to give a new hybrid orbital known as an sp hybridized orbital.

-sp hybridization is also called diagonal hybridization.

-Each sp hybridized orbital has an equal amount of s and p character – 50% s and 50% p character.

HYBRIDIZATION : Redistribution of the energy of orbitals of individual atoms to give orbitals of equivalent energy happens when two atomic orbitals combine to form a hybrid orbital in a molecule. This process is called hybridization.

Learn more about hybridization

brainly.com/question/29689126

#SPJ4

0.6122L volume of a 0.450 m naf solution is required to react completely with 935 ml of a 0.320 m strontium chloride solution , 0.15 ml moles of strontium fluoride are formed from this reaction

A strontium and chlorine salt is known as strontium chloride. It is a "typical" salt and creates watery neutral solutions. This salt creates a bright red flame, just like all strontium compounds do, and is frequently used in pyrotechnics because of this.

PART A

Number of moles of SrCl, Molarity Volume (L)

=0.420x0.357 L

=0.15 mol

According to the reaction, 2 mol of NaF reacts with 1 mol of SrCI,

Therefore, number of moles of NaF needed to react with 0.15 mol of StCl, is calculated as follows:

Number of moles of NaF needded = 0.15 molx2 mol NaF1 mol

=0.30 mol NaF

Volume of NaF needed

=no. of moles/molarity

=0.30 mol/0.490 mol/L

=0.6122 L

PART B

For 1 mol of SrCl,, 2 mol of NaF is required to form 1 mol of STF, Therefore, moles of SrF, formed by 0.30 mol of NaF is calculated as follows:Moles of SrF, formed = 1/2x0.30 

=0.15 mol

Learn more  about strontium chloride here;

https://brainly.com/question/13875076

#SPJ4

Answer: _NH3 2O2->_HNO3_H2O

Explanation:

If in the question all the twos and threes are subscripts, that is the answer. Just put a 2 in front of the oxygen on the left side of the yield arrow, and everything will be balanced.

A Spectrophotometer measures enzyme activity by measuring the rate at which absorbance change. Absorbance means to measure the concentration of the product of an enzyme reaction.

How does low ph causes high absorbance?

Enzyme activity is at its maximum value at the optimum pH. As the pH value is increased above or decreased below the optimum pH the enzyme activity decreases.

So, when the medium of study is highly acidic the breaking of the bonds takes place easily. At lower pH values, the absorbance is high because the acid slows down the enzyme activity thereby changing its optimal pH and causes hydrolysis.

To know more about spectrophotometer and absorbance click on https://brainly.com/question/29560866

#SPJ4

The values for the reduction potential are: Mn2+ = +1.51 V, NO3 = +0.96 V. According to the results shown, NO3's reduction potential is lower than Mn2 reduction potential. Thus, NO3 cannot oxidize Mn2+.

Considering half reactions:

MnO4(aq) + 8H (aq) + 5e Mn2+(aq) + 4H₂O(1)

NO3 (aq) + 4H (aq) + 3e NO(g) + 2H2O(1)

Both the reactions are reduction reactions involving gain of electrons. Nitrate ion is itself reduced to NO and can oxidize any ion which is losing electrons.

Reversing the first given reaction:

Mn2+ (aq) + 4H₂O(l) → MnO4¯(aq) + 8H+ (aq) + 5e-

NO3-(aq) + 4H +(aq) + 3e- NO(g) + 2H2O(1)

(l)According to this equation, Mn (II) loses electrons to get oxidized to permanganate ion and nitrate ion is reduced to NO. These 2 reactions give result to redox reaction where Nitrate can reduce itself to NO, and oxidize the corresponding Mn (II) ion.

An oxidation and a reduction are the two components of a redox process. These two processes, which are referred to as half reactions, entail altering the oxidation state of the reacting atoms.

Chemical processes known as oxidation-reduction reactions involve the exchange of electrons between the reacting species. The oxidation status of the reactants changes in conjunction with these electron exchanges.

Learn more about oxidation here:

https://brainly.com/question/25798412

#SPJ4

Mass of NaHCO3 is needed to generate the CO2 is 0.3043 g.

Find the attachment answer

Learn more about total mass of a product refer to :

https://brainly.com/question/24928843

#SPJ1

The action of hydrazine on carboxylic acid involves the nitro group's electron-withdrawing properties.

Since carboxylic acid is a poor electrophile and the nitro group's ability to suck electrons increases it, hydrazine can easily attack it. Aniline is a base that can affect the hydrazine's reactivity if we reduce in the first stage. A fascinating chemical is luminol, which produces light as a byproduct of oxidation. It is a component of a forensic test for blood, as seen on the CSI television program.

1.The first procedure in the production of luminol involves the reaction of hydrazine with 3-nitrophthalic acid.

2. Triethylene glycol, a solvent with a high boiling point, is added to an aqueous solution of the hydrazine salt to facilitate this reaction. After boiling out the extra water, the temperature is increased to a point where the dehydration is complete within a short period of time. Using sodium dithionite, the nitro- group of the resultant product, nitrophthalhydrazide.

3.is then converted to an amine group to create luminol.

4.Due to compound 3's enolization, which makes it soluble in alkali, the reduction is carried.

Thus, reduction of the nitro group is completed in the second step of this sequence rather than the first.  

To learn more about luminol refer- https://brainly.com/question/5032032

#SPJ4

Your question is incomplete please find the complete question over the internet.