Answer: I don't have the answer I'm just doing this for the points i hope you get your answer though
Explanation:
The formation of the iron(III) thiocyanate complex ion is an exothermic equilibrium system. For each change to the system, indicate how the concentration of each species in the chemical equation will change to reestablish equilibrium. An up arrow indicates an increase in concentration, a down arrow indicates a decrease in concentration, and leaving it blank means there is no change in the concentration. Fe (a)SCN (aq) Fe(SCN)2+(a) increasing the concentration of Fe3+ decreasing the concentration of Fe(SCN)+ increasing the temperature of the system
Answer:
9sjkskskwissjsjsjsjsjskwiiw2782282u
On the basis of the information above, what is the approximate percent ionization of HNO2 in a 1.0 M HNO2 (aq) solution?
Answer:
The answer is "2%"
Explanation:
Equation:
[tex]HNO_2\ (aq) \leftrightharpoons H^{+} \ (aq) + NO_2^{-}\ (aq) \\\\\ K_a = 4.0\times \ 10^{-4}[/tex]
[tex]H^{+}=?[/tex]
Formula:
[tex]Ka = \frac{[H^{+}][NO_2^{-}]}{[HNO_2]}[/tex]
Let
[tex][H^{+}] = [NO_2^{-}] = x[/tex] at equilibrium
[tex]x^2 = (4.0\times 10^{-4})\times 1.0\\\\x = ((4.0\times 10^{-4})\times 1.0)^{0.5} = 2.0 \times 10^{-2} \ M\\\\[/tex]
therefore,
[tex][H^{+}] = 2.0\times 10^{-2} \ M = 0.02 \ M[/tex]
Calculating the % ionization:
[tex]= \frac{([H^{+}]}{[HNO_2])} \times 100 \\\\= \frac{0.02}{1}\times 100 \\\\= 2\%\\\\[/tex]
The approximate percent ionization of HNO₂ in a 1.0 M HNO₂ (aq) solution is 2%.
How we calculate the % ionization?% ionization of any compound will be calculated as follow:
% ionization = ([ion]/[acid or base]) ₓ 100
Given chemical reaction with ICE table will be represented as:
HNO₂(aq) → H⁺(aq) + NO₂⁻(aq)
initial 1 0 0
change -x +x +x
equilibrium 1-x x x
Equilibrium constant will be represented as:
Ka = [H⁺][NO₂⁻] / [HNO₂]
Acid dissociation constant for HNO₂ = 4×10⁻⁴
Putting all values in the above equation, we get
4×10⁻⁴ = x² / 1-x
Value of changeable quantity is very less, so we neglect from the concentration of HNO₂.
4×10⁻⁴ = x²
x = 2 × 10⁻²
So, the concentration of H⁺ ion = 2 × 10⁻²M
Now we put all these values in the % ionization equation, we get
% ionization = (0.02/1) × 100 = 2%
Hence , % ionization is 2%.
To know more about % ionization, visit the below link:
https://brainly.com/question/12198017
determine the maximum amount of NaN03 that was produced during the experiment. Explain how you determined the amount
Answer:
9 moles of NaNO3 is obtained
Explanation:
The balanced chemical reaction equation for the reaction is;
Al(NO3)3 + 3NaCl-------> 3NaNO3 + AlCl3
Now, we have to determine the limiting reactant. The limiting reactant yields the least amount of NaNO3.
1 mole of Al(NO3)3 yields 3 moles of NaNO3
4 moles of Al(NO3)3 yields 4 * 3/1 = 12 moles of NaNO3
Also,
3 moles of NaCl yields 3 moles of NaNO3
9 moles of NaCl yields 9 * 3/3 = 9 moles of NaNO3
Hence, NaCl is the limiting reactant and 9 moles of NaNO3 is obtained.
9 moles of NaNO₃ is obtained.
Balanced chemical reaction:
[tex]Al(NO_3)_3 + 3NaCl-----> 3NaNO_3 + AlCl_3[/tex]
From the reaction, it is seen that the limiting reactant yields the least amount of NaNO₃.
1 mole of Al(NO₃)₃ yields 3 moles of NaNO₃
4 moles of Al(NO₃)₃ yields 4 * 3/1 = 12 moles of NaNO₃
Also,
3 moles of NaCl yields 3 moles of NaNO₃
9 moles of NaCl yields 9 * 3/3 = 9 moles of NaNO₃
Hence, NaCl is the limiting reactant and 9 moles of NaNO₃ is obtained.
Find more information about Balanced chemical reaction here:
brainly.com/question/15355912
WHAT CAN YOU LEARN OR (LEARNING GOAL) ABOUT MITOSIS AND CELL CYCLE?
Explanation:
At the end of mitosis, the new daughter cells contain the same number of chromosomes as the parent cell. Mitosis enables cellular growth and repair in multicellular organisms.
What volume will 50.2 grams of CO2 occupy at STP?
Answer:
the volume of 50.2 grams of co2
would simply be
50.2÷48
Determine the number of molecules of C2CI4 contained in 73.1g of C2CI4
Answer:
2.35x10²³ molecules of C2Cl4 are present
Explanation:
To solve this question we must convert, as first, the mass of C2Cl4 to moles using its molar mass (C2Cl4 = 165.83g/mol). Then, using Avogadro's number we can find the number of molecules:
Moles C2Cl4:
73.1g * (1mol / 165.83g) = 0.441 moles C2Cl4
Molecules:
0.441 moles C2Cl4 * (6.022x10²³molecules / 1mol) =
2.35x10²³ molecules of C2Cl4 are presentat 298 k the H+ ion concentration of a aqueous solution is 1.00 x 10-5 M what is the pH of the solution
Answer:
pH = 5.00
Explanation:
The pH is an unit of concentration widely used in chemistry and quality control of aqueous solutions. It serves to find the security of a product to human or pet consumption. Is defined as:
pH = -log [H+]
That means, the pH of a solution that is [H+] = 1.00x10⁻⁵M:
pH = 5.00What property characterizes a spontaneous redox reaction?
A. A positive oxidation potential for the oxidation half-reaction
B. A positive reduction potential for the reduction half-reaction
C. A positive sum of the two half-reactions' standard potentials
D. A negative sum of the two half-reactions' standard potentials
Answer: C
Explanation:
Just took it :)
A positive sum of the two half-reactions' standard potentials is a property characterizes a spontaneous redox reaction. Hence, option C is correct.
What is spontaneous redox reaction?Spontaneous reactions are reactions in which no external force is applied to proceed with the reaction.
A spontaneous redox reaction maybe a sort of reaction during which there usually the discharge of energy where the electrons are transferred from anode to cathode and this is also known as the electrochemical cells equation the reactions result in the generation of electricity.
Redox reactions are reactions in which loss or gain of electrons occur between an atom.
In other words redox reaction between Zn and Cu²⁺ is spontaneous this is due to the difference in potential energy between these two substance.
A positive sum of the two half-reactions' standard potentials is a property characterizes a spontaneous redox reaction. Hence, option C is correct.
Learn more about spontaneous redox reaction, Here:
https://brainly.com/question/24297398
#SPJ5
To obtain pure lead, lead (II) sulfide is burned in an atmosphere of pure oxygen. The products of the reaction are lead and sulfur trioxide (SO3). Write a balanced chemical equation for this process. How many grams of lead will be produced if 2.54 grams of PbS is burned with 1.88 g of O2? Express your answer to the correct number of significant figures. Be sure to show all steps completed to arrive at the answer. (Hint: be sure to work the problem with both PbS and O2).
Answer: 2.20 g Pb
They gave us the masses of two reactants and asked us to determine the mass of the product. We will need a chemical equation with masses and molar masses, so, let's gather all the information in one place.
Mᵣ: 239.27 32.00 207.2
2PbS + 3O₂ ⟶ 2Pb + 2SO₃
m/g: 2.54 1.88
What is the IUPAC name for the following compound?
a. benzenecarbonitrile
b. benzenecyanide
c. phenylcyanide
d. cyanophenyl
Answer:
Option a. Benzenecarbonitrile
Explanation:
You are not providing the picture of the compound. However, I manage to find the picture of it, so I'm gonna answer this with the picture. Its attached here at the end.
As for the IUPAC name of this compound, it would be Benzenecarbonitrile, or simply, benzonitrile.
This compound has the molecular formula C₆H₅CN. It receives this name over the other ones, because this is a aromatic cyanide, and aromatic cyanide has nitriles behavior, (Strength of the nitrogen over the carbon), therefore, this group has priority over the whole molecule. As the principal chain is the benzene, the carbonitrile is the radical of the group, and when cyano groups are as radical and not as principal chains, it has a behavior of nitrile, and it's named as nitrile. therefore, option b, cannot be the name.
phenylcyanide is naming the phenyl as radical, but the benzene is the principal group in this compound, and the cyanide is the radical. It happens the same thing with cyanophenyl.
Hope this helps
Many scientists are studying tiny particles called nanoparticles, Which best
describes how the scientists are probably trying to learn about these
particles?
Answer:
By experimenting
Explanation:
If an alkene is protonated and the solvent is an alcohol rather than water, a reaction takes place that is very similar to acid-catalyzed hydration, but in the second step of the mechanism the alcohol functions as a nucleophile instead of water. Draw a plausible mechanism for the following process: What is the most likely sequence of steps in the mechanism
Answer:
Please find the structure of the mechanism in the attached file.
Explanation:
What is the ph of a HCl solution with a concentration of 2.51x10^-5M
Answer:
pH = 4.6
Explanation:
As hydrochloric acid (HCl) is a strong acid, the molar concentration of H⁺ species is the same as the molar concentration of the HCl solution. In other words:
[H⁺] = 2.51x10⁻⁵ MWith the information above in mind we can calculate the pH:
pH = -log[H⁺]pH = -log(2.51x10⁻⁵ M)pH = 4.6What answer is it and how ? please help !!!!!! ill mark brainlyest if right
Answer:
The answer is B
Brainliest please!
Increasing the temperature increase the rate of a reaction by doing which of the following
Answer:
Increase in temperature increases the average kinetic energy of the reactant molecules, hence lowering the activation energy of the reaction.
A balloon is inflated with 1.25 L of helium at a temperature of 298K. What is
the volume of the balloon when the temperature is 310K?
Answer:
What is
the volume of the balloon when the temperature is 310K?
We'll need a new what
to support the cleaner energy world of the future.
Answer:
Renewable source of energy
Using unrenewable sources is destroying the earth
What is the percent yield of a reaction producing 26g Iridium V Sulfate from 30g Lithium Sulfate and 30g Iridium V Carbonate?
According to the kinetic molecular theory which substances are made of particles ?
Answer:
The kinetic molecular theory of matter states that: Matter is made up of particles that are constantly moving. All particles have energy, but the energy varies depending on the temperature the sample of matter is in. This in turn determines whether the substance exists in the solid, liquid, or gaseous state.
Explanation:
Kinetic molecular theory explains the properties of solids, liquids and gases. As per this theory, matter is made of particles.
What is kinetic theory?
Kinetic molecular theory explains the properties of different states of matter. According to this theory matter is made up of particles. But the theory is mostly applies for gases.
According to kinetic theory of gases, gaseous substances consists of tiny spherical particles which are located apart from each other and hence no intermolecular force acts between them. They are in random motion and gains kinetic energy.
The kinetic energy of particles are temperature dependant and it increase as temperature rises. The collision between the particles and the particle and wall of the container in which they are will be elastic collision.
These concepts are applicable only for ideal gases. An less applicable for other states of matter.
To find more kinetic theory, refer here:
https://brainly.com/question/15357425
#SPJ6
How many moles of Oxygen atoms are contained in 45.9 mol CO2?
Answer:
Explanation:
10 moles of oxygen atoms.\ \textbf{b)} 91.8 moles of oxygen at
a solar eclipse only happens during a Moon
A. New
B. Crescent
C. Gibbous
D. Full
Answer:
A. New
Explanation:
concentrated phosphoric acid is90% H3PO4 by mass and the remaining mass is water. The molarity of H3PO4 is 12.2M at temperature (a) what volume (mL) of this solution is needed to make a 1.00L solution of 1.00M phosphoric acid?
Answer:
82.0 mL
Explanation:
Step 1: Given data
Concentration of concentrated acid (C₁): 12.2 MVolume of concentrated acid (V₁): ?Concentration of dilute acid (C₂): 1.00 MVolume of dilute acid (V₂): 1.00 LStep 2: Calculate the required volume of the concentrated acid
We want to prepare a dilute solution from a concentrated one. We can calculate the volume of the concentrated acid using the dilution rule.
C₁ × V₁ = C₂ × V₂
V₁ = C₂ × V₂ / C₁
V₁ = 1.00 M × 1.00 L / 12.2 M = 0.0820 L = 82.0 mL
Please help! Will give brainliest!!!
How does the temperature of liquid nitrogen compare to the temperature of liquid water? Remember nitrogen condenses at -196 °C and freezes at -210°C and water can condense to a liquid at 100°C and freezes at 0°C.
A. liquid nitrogen is a lot warmer
B. liquid nitrogen is slightly warmer
C. liquid nitrogen is slightly colder
D. liquid nitrogen is a lot colder
A sample of dry gas is found to occupy 3.650 L at 22.0°C and 740.0 mmHg. How many moles of gas are present?
will mark brainliest
Answer:
0.147
Explanation
PV/RT
what is the percent composition of calcium fluoride
Answer:
78.07
Explanation:
them seperatly is
Calcium Ca 51.333%
Fluorine F 48.667%
What is the resulting element of this alpha decay. Also, explain how you got your answer.
241Am95 → ZXA + 4He2
Give me an example of a Beta decay equation and explain the process of the formation of the new element.
Answer:
will this help you ?
Explanation:
Many nuclei are radioactive; that is, they decompose by emitting particles and in doing so, become a different nucleus. In our studies up to this point, atoms of one element were unable to change into different elements. That is because in all other types of changes discussed, only the electrons were changing. In these changes, the nucleus, which contains the protons that dictate which element an atom is, is changing. All nuclei with 84 or more protons are radioactive, and elements with less than 84 protons have both stable and unstable isotopes. All of these elements can go through nuclear changes and turn into different elements.
What is the maximum number of moles of NaCl that can be produced from the reaction of 5.6 mol Na and 4.7 mol CI2?
2Na + Cl2 —> NaCl
What is the limiting reactant?
What is the excess reactant?
Answer:
Explanation:
Na + Cl2 —> NaCl
For two acids of equal concentration, the stronger acid has-
Which of the following is/are true?
A in each period the atomic numbers increase from
left to right
b The periods are numbered 1 through 7 on the left-
hand side of the periodic table
C Elements in the same period have chemical
properties which are not all similar
d All of the above
Answer:
Answer is D. All of the above
What is the pH of a house cleaning solution with molar hydrogen ion concentration [H+] of 1.0 x 10-8? please explain. Thank you so much!
[tex]pH = - log({H}^{ + } ) \\ pH = - log(1.0 \times {10}^{ - 8} ) \\ pH = 8[/tex]
pH is the measure of acidity and alkalinity of a solution. A pH value less than 7 means the solution is acidic. A pH value greater than 7 means the solution is basic. A pH value of 7 means the solutions is neutral.