The average rate at which the neon atoms collide with one side of the container is [tex]3.31 \times 10^{26} \ atoms/s[/tex].
The given parameters;
length of the cubical box, L = 0.368number of moles of the gas, n = 1.98temperature, T = 298 Kmass of the gas, m = 3.35 x 10⁻²⁶ kgThe average kinetic energy of the gas molecules is calculated as follows;
[tex]K = \frac{3}{2} \frac{R}{N_a} T\\\\K = \frac{3 \times 8.314\times 298}{2\times 6.022 \times 10^{23}} \\\\K = 6.17\times 10^{-21} \ J/atoms[/tex]
The average speed of the gas molecules is calculated as follows;
[tex]K = \frac{1}{2}mv_{rms}^2\\\\v_{rms} = \sqrt{\frac{2K}{m} } \\\\v_{rms} = \sqrt{\frac{2\times 6.17 \times 10^{-21}}{3.35\times 10^{-26}} } \\\\v_{rms} = 607 \ m/s[/tex]
The time of collision of the gas molecules with the walls of the container is calculated as follows;
[tex]t = \frac{2d}{v} \\\\t = \frac{2\times 0.368}{607} \\\\t = 0.0012 \ s[/tex]
The average rate at which the gases collide with a single wall out of the 3 identical walls is calculated as follows;
[tex]rate =\frac{1}{3} \times \frac{n \times N_a}{t} \\\\rate = \frac{1.98 \times 6.02 \times 10^{23} \ atoms}{3 \times 0.0012 \ s} \\\\rate = 3.31 \times 10^{26} \ atoms/s[/tex]
Thus, the average rate at which the gases collide with one side of the container is [tex]3.31 \times 10^{26} \ atoms/s[/tex].
Learn more here:https://brainly.com/question/17566463
When tightening a bolt, you push perpendicularly on a wrench with a force of 185 N at a distance of 0.11 m from the center of the bolt. How much torque are you exerting relative to the center of the bolt
Explanation:
The torque exerted on the wrench is
[tex]\tau = Fd\sin{\theta} = Fd[/tex]
since the force is applied perpendicular to the wrench, in which sin90 = 1. The torque then is
[tex]\tau = (185\:\text{N})(0.11\:\text{m}) = 20.35\:\text{N-m}[/tex]
When is the estimated due date (post conception) for parturition?
Answer: 38 weeks (266 days) from the date of conception.
Explanation: www.momjunction.com/pregnancy-due-date-calculator/
please help me with these four i dont rlly get the question itself tbh. 20 points
Explanation:
These prefixes are very commonly used in naming chemical compounds.
Di- means two.
For example, carbon dioxide's formula is be written as [tex]\text{CO}_2,[/tex] and it has 2 oxygen atoms, hence "di-oxide."
Tetra - means four.
For example, carbon tetrachloride's chemical formula is written as [tex]\text{CCl}_4[/tex], and there are four chlorine atoms
Deca- means ten
For example, lanthanum decahydride's chemical formula is written as [tex]\text{LaH}_{10}.[/tex] In this case there are 10 hydrogen atoms for every lanthanum atom.
Hepta - means seven
For example, iodine heptafluoride is written as [tex]\text{IF}_7[/tex]. Note the seven fluorine atoms attached to the iodine atom, hence the name "hepta-fluoride."
Convert :
36°C = ... °F
373 K = ... °C
Question easy
Answer:
36 C= 96.8 F
373 K= 99.85
Explanation:
C to F: (36 x 1.8) + 32
= 64.8 +32
= 96.8 F
K to C: C= K- 273.15
C= 373-273.15
C= 99.85
____
= 36°C
=( 36 × 9/5 ) + 32
=(36 ÷ 5 × 9) + 32
=(7,2 × 9) + 32
= 64,8 + 32
= 96,8°F______
______
= 373 K
= 373 - 273
= 100°C[tex] \boxed { \sf semoga \: membantu \: :v }[/tex]
A 115 kg hockey player, Adam, is skating east when he tackles a stationary 133 kg player, Bob. Afterward, they move at 1.35 m/s east. What was Adam's velocity before the collision? (Unit = m/s)
Answer:
Explanation:
Conservation of momentum
115v + 133(0) = (115 + 133)1.35
v = 2.911304...
v= 2.91 m/s east
Answer:
The velocity east is 2.91
Explanation:
Fill in the box
2.91
How do organisms use communication to survive?
Answer: Im not entirly sure but I think It's D all the above. I think all but B because I never really heard of that but if you look in our history I think that happen im not sure I would wait untill you know that somone knows for sure.
Explanation:
The vertical position of the 100-kg block is adjusted by the screw activated wedge. Calculate the moment which must be applied to the handle of the screw to raise the block. The single thread screw has square threads with a mean diameter of 30 mm and advances 10 mm each complete turn. The coefficient of friction for the screw threads is 0.24, and the coefficient of friction for all the mating surfaces of the block and the wedge is 0.40. Neglect friction at the ball joint A
We have that for the Question "" it can be said that Calculate the moment which must be applied to the handle of the screw to raise the block is
M = 7.30 N.mFrom the question we are told
The vertical position of the 100-kg block is adjusted by the screw activated wedge. Calculate the moment which must be applied to the handle of the screw to raise the block. The single thread screw has square threads with a mean diameter of 30 mm and advances 10 mm each complete turn. The coefficient of friction for the screw threads is 0.24, and the coefficient of friction for all the mating surfaces of the block and the wedge is 0.40. Neglect friction at the ball joint A
Generally the equation for the Block is mathematically given as
[tex]\sum Fy=0[/tex]
[tex]981cos21.80 = R_2cos53.6\\\\R_2=1535N[/tex]
the equation for the Wedge is mathematically given as
[tex]\sum Fx=0\\\\1535cos36.4=Pcos21.8\\\\P=1331N[/tex]
the equation for the Screw is mathematically given as
[tex]\beta = tan^{-1}*\frac{L}{2*\pi*r} \\\\\beta = tan^{-1}*\frac{10}{2*\pi*(15)} \\\\\\beta = 6.06\\\\\theta = tan^{-1}*0.25 \\\\\theta = 14.04\\\\\\Therefore\\\\\theta + \beta = 20.1\\\\[/tex]
Therefore
[tex]M = Pr tan (\theta + \beta)\\\\M = 1331(0.015) tan20.09\\\\M = 7.30 N.m[/tex]
For more information on this visit
https://brainly.com/question/23379286
g What is the CD's moment of inertia for rotation about a perpendicular axis through the edge of the disk
Answer:
Explanation:
A CD has an OD of 120 mm and an ID of 15 mm and has a mass between 14 and 33 grams. Let's call it m
Lets call the outer and inner radii R and r respectively
Find the moment of inertia about a line perpendicular to the surface of the disc through its center. We can integrate or look up the result from standard tables
I = ½m(R² + r²)
then use the parallel axis theorem to shift the position of the axis
I = ½m(R² + r²) + md²
where d is the distance of the shift. In this case d = R
I = ½m(R² + r²) + mR²
I = m(1.5R² + 0.5r²)
If we select a mass of say 20 grams
I = 0.020(1.5(0.060²) + 0.5(0.0075²))
I = 0.0001085625 kg•m²
Why can't we feel all the action-reaction forces around us?
Answer:
This happens when the mass of one of the objects is very large and does not move.
Explanation:
given two vector
p= 2i + 2j + 4k
q = i - 4j + 4k
find p+ q
Answer:
3i - 2j + 8k
Explanation:
p + q = (2i + i) + (2j - 4j ) + (4k + 4k )
= 3i -2j + 8k
An object of mass m is hanging by a string from the ceiling of an elevator. The elevator is moving down at constant speed. What is the tension of the string?
A. Zero
B. Equal to mg
C. Less than mg
D. Greater than mg
Answer:
D. Greater than mg
Explanation:
According to Newton’s second law of motion, the net force equals mass times acceleration. We are going to use a free body diagram (force diagram) to show that the equation of the motion is given by
T – mg = – ma
Thereby,
T = mg – ma
and the answer is: (d)
D. Greater than mg
_________________________________
(hopet his helps can I pls have brainlist (crown)☺️)
A truck moves 60 km West, and then 80 km North, and then
travels in a straight line back to its starting point. The distance
travelled by the truck is ____km and its displacement is _____km
[tex]▪▪▪▪▪▪▪▪▪▪▪▪▪ {\huge\mathfrak{Answer}}▪▪▪▪▪▪▪▪▪▪▪▪▪▪[/tex]
Distance travelled by the truck is ~
[tex] \boxed{240 \: \: km}[/tex]And it's displacement is ~
[tex] \boxed{0 \: \: km}[/tex][tex] \large \boxed{ \mathfrak{Step\:\: By\:\:Step\:\:Explanation}}[/tex]
See the diagram in attachment for reference ~
Let O be the initial point, It travels 60 km towards west till point B and then 80 km towards north till point P and returns to initial point O in a straight line, now as we can observe here, it forms a right angled Triangle.
The measure of two legs is 60 km and 80 km, let's find the hypotenuse ~
According to Pythagoras theorem ~
hypotenuse² = sum of squares of other two legs
that is ~
[tex]h {}^{2} = 60 {}^{2} + 80 {}^{2} [/tex][tex] {h}^{2} = 3600 + 640 0[/tex][tex]h {}^{2} = 10000[/tex][tex]h = \sqrt{10000} [/tex][tex]h = \sqrt{100 \times 100}{}[/tex][tex]h = 100 \: \: km[/tex]So, the distance between the point A and O is 100 km
Now, The total distance is equal to the distance covered through actual path that is ~
60 km + 80 km + 100 km 240 kmAnd displacement is the distance between the final point and initial point, but since the truck returns to the point from where it started the journey, so the final and initial point is same therefore displacement is equal to 0.
A constant horizontal force of 30.0 N is exerted by a string attached to a 5.0 kg block being pulled across a tabletop. The block also experiences a frictional force of 5.0 N due to contact with the table. What is the horizontal acceleration of the block?
Answer:
A 5.00- kg block is placed on top of a 10.0 -kg block (Fig. P5.68). A horizontal force of 45.0 N is applied to the 10.0-kg block, and the 5.00- kg block is tied to the wall. The coefficient of kinetic friction between all surfaces is 0.200. (a) Draw a free-body diagram for each block and identify the action-reaction forces between the blocks.
(b) Determine the tension in the string and the magnitude of the acceleration of the 10.0-kg block.
The horizontal acceleration of the block is 5 m/s².
To calculate the horizontal acceleration on the block, we use the formula below.
Formula:
ma = (F-F')............... Equation 1Where:
m = mass of the blocka = Horizontal acceleration of the blockF = Horizontal force exerted on the stringF' = Frictional forceMake "a" the subject of the equation.
a = (F-F')/m............... Equation 2Substitute these values into equation 2
F = 30 NF' = 5 Nm = 5.0 kgSubstitute these values into equation 2
a = (30-5)/5a = 25/5a = 5 m/s²Hence the horizontal acceleration of the block is 5 m/s².
Learn more about horizontal acceleration here: https://brainly.com/question/929566
An object moving at a constant velocity of 5.4 m/s travels for 12 s. How far will it move during that time?
Free-fall Acceleration is -10 m/s^2
I also need the formula
Answer:
Explanation:
s = s₀ + v₀t + ½at²
s = 0 + 5.4(12) + ½(0)12²
s = 64.8 m
An object will begin moving from rest when acted upon by which forces?
A. Forces that are slightly less than the force of friction
B. Forces that result in a net force of zero
C. Forces that are equal and act in opposite directions
D. Forces that are greater in one direction than in any other direction
Answer:
D
Explanation:
Process of elimnination + it's the only one that makes sense
An object will begin moving from rest when acted upon by forces that are greater in one direction than in any other direction. Hence, Option (D) is correct.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity. An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
When forces that are greater in one direction than in any other direction, resultant will be unbalanced forces. Unbalanced forces are those acting on a body when the net force acting on the body is greater than zero. The body alters its state of motion when unbalanced forces act on it.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ2
The thermometer bulb should have____
a) high heat capacity
b) No heat capacity
c) Small heat capacity
d) Varying heat capacity
you are standing ata known distance from the statue of liberty describe how you could determine its height using only a meter stick
Use the meter stick to measure your height to the level of your eyes, then use trigonometry ratio formula to calculate the height from your eyes' level and above of the statue of liberty with angle of elevation, then, add the two heights.
If you are standing at a known distance from the statue of liberty, a meter stick can be used to measure your known distance away from the statue of liberty.
To determine its height using only a meter stick, the angle at which you look at the peak of statue of liberty must be measured or known. The height of the statue of liberty can be calculated if you know the angle of elevation at which you look at the peak of the statue, and the availability of the meter stick.
Use the meter stick to measure your height to the level of your eyes, then use trigonometry ratio formula to calculate the height from your eyes' level and above of the statue of liberty. That is,
Tan Ф = opposite / adjacent
Tan Ф = H/d
H = d x TanФ
Where
H = calculated height from the eyes level and above
Ф = angle of elevation
d = known distance away from the statue
Let h = Your measured height of your body to the eyes level
Then,
The height of the statue of liberty = H + h
Learn more here: https://brainly.com/question/24693484
I need help with this equation. 4 tutors so far on the math side are unable to help me solve the problem.
A spherical ball of lead (density 11.3 g/cm 3) is placed in a tub of mercury (density 13.6 g/cm 3). Which answer best describes the result
The lead ball will float with about 17% of its volume above the surface of the mercury.
We know that density is defined as mass per unit volume of a substance. The density of a substance is an intrinsic property which can be used to identify a substance.
Given that Lead is less dense that mercury, we know that lead will float on mercury. Since the density of mercury is 13.6 g/cm3 and that of lead is 11.3 g/cm3, lead ball will float with about 17% of its volume above the surface of the mercury.
Learn more: https://brainly.com/question/12108425
Missing parts;
A spherical ball of lead (density 11.3 g/cm3) is placed in a tub of mercury (density 13.6 g/cm3). Which answer best describes the result?
A.The lead ball will float with about 83% of its volume above the surface of the mercury.
B.The lead ball will float with about 17% of its volume above the surface of the mercury.
C.The lead ball will float with its top exactly even with the surface of the mercury.
D.The lead will sink to the bottom of the mercury.
E.none of the above
Which properties make a metal a good material to use for electrial wires
Answer:
Most importantly metals can pass an electric current without being affected and changed by the electricity. Electrical conductivity combined with ductility makes metals the most suitable materials for electrical transmission wires.
a body of mass 15 kg accelerates from rest of the rate of 4.0 ms^-2. determine the distance with the body travel in 25 seconds
The distance traveled by the body in the given time is 1,250 m.
The given parameters;
mass of the body, m = 15 kgacceleration of the body, a = 4 m/s²time of motion, t = 25 sinitial velocity, u = 0The distance traveled by the body in the given time is calculated as follows;
[tex]s =ut + \frac{1}{2} at^2\\\\s = 0 \ + \ \frac{1}{2} (4)(25^2)\\\\s =1,250 \ m[/tex]
Thus, the distance traveled by the body in the given time is 1,250 m.
Learn more here:https://brainly.com/question/17067013
True or False: Any wavelength of light would work for this experiment. Explain your response, including the term quantum or quantized.
Answer:
I think false I don't know if I right but I hoped this help
A magnesium ion has a charge of +2 and an oxygen ion has a charge of –2. What is the chemical formula of the compound made of these ions? (correct answer gets brainliest)
A) Mg2O2
B) MgO
C) MgO2
D) Mg2O
Question: A NEO distance from the Sun is 1.18 AU. What is its relative speed compared to Earth (round your answer to 3 decimal places)
Its relative speed compared to Earth is 0.921
The speed of the object v = 2πr/T where r = radius of orbit and T = period of orbit.
Let v = speed of earth, r = radius of earth orbit = 1 AU and T = period of earth orbit.
So, v = 2πr/T
Also, v' = speed of NEO, r' = radius of NEO orbit = distance of NEO from sun = 1.18 AU and T' = period of NEO orbit.
So, v' = 2πr'/T'
v'/v = 2πr'/T' ÷ 2πr/T
v'/v = r'/r × T/T'
From Kepler's law, T² ∝ r³
So, T'²/T² = r'³/r³
(T'/T)² = (r'/r)³
T'/T = √[(r'/r)]³
T/T' = √[(r'/r)]⁻³
So, substituting this into the equation, we have
v'/v = r'/r × T/T'
v'/v = r'/r × √[(r'/r)]⁻³
v'/v = √[(r'/r)]⁻¹
Since r' = 1.18 AU and r = 1 AU, r'/r = 1.18
So, v'/v = √[(r'/r)]⁻¹
v'/v = √[(1.18)]⁻¹
v'/v = [1.0863]⁻¹
v'/v = 0.921
So, its relative speed compared to Earth is 0.921
Learn more about NEO here:
https://brainly.com/question/24157038
calculate the mass of a block of ice having volume 5m³. (density of ice≈920 kg/m³)
Answer:
4600 Kg/m³
Explanation:
Volume of block=5m³
Mass of block= 920 kg/m³
Density=mass × volume
=920 × 5³
=4600 /m³
The density of ice is 4600 Kg/m³
___________________________________
(Hope this helps can I pls have brainlist (crown)☺️)
Explanation:
Solution:
Here
volume=5
Density=920
Density =Mass/Volume
or,Mass=Density*Volume
or,M=920*5
so,M=4600kg
a. How fast should a boy of 40kg mass run so that the kinetic energy becomes 800J?
Answer:
[tex]k.e. = \frac{1}{2}mv {}^{2} \\ 800= \frac{1}{2} \times 40 \times v {}^{2} \\ 800 = 20v {}^{2} \\ v {}^{2} = 400 \\ v {}^{2} = 20ms {}^{ - 1} [/tex]
k.e. = kinetic energy
hope helpful <3
A 0.60-kgkg ball, attached to the end of a horizontal cord, is rotated in a circle of radius 1.3 mm on a frictionless horizontal surface. Part A If the cord will break when the tension in it exceeds 60 NN , what is the maximum speed the ball can have
11.4 m/s
Explanation:
The cord will break when the centripetal force exerted on it meets or exceeds the maximum tension [tex]T_{max}[/tex] that it can handle.
[tex]T_{max} = m\dfrac{v_{max}^2}{r}[/tex]
Solving for [tex]v_{max},[/tex] we get
[tex]v_{max}^2 = \dfrac{rT_{max}}{m}[/tex]
or
[tex]v_{max} = \sqrt{\dfrac{rT_{max}}{m}} =\sqrt{\dfrac{(1.3\:\text{m})(60\:\text{N})}{(0.6\:\text{kg})}}[/tex]
[tex]\:\:\:\:\:= 11.4\:\text{m/s}[/tex]
I need your help with this question, it’s my final exam for physics
Answer:
●Bx=Bcos40
Bx=10 × 0.76
Bx=7.6
●By=Bsin40
By=10×0.64
By=6.4
Hope it will help you.
Which is a similar theme in both "The Stag at the Pool" and "Hans in Luck"? O A. The things we think are valuable sometimes turn out not to be valuable after all. 0 B. It is important to know whom we can trust and whom we cannot O C. By working hard, we will end up with possessions that will make us feel successful. 0 D. The best things come in small packages.
A similar theme in both "The Stag at the Pool" and "Hans in Luck" is A. The things we think are valuable sometimes turn out not to be valuable after all.
In "The stag at the pool", a thirsty stag went to the pool to drink. As he bent over, he admired his antlers but despised his legs. He saw a lion and ran but his antlers got stuck in a tree and he was caught by the lion.
The theme in "Hans in Luck" shows that one doesn't need possessions to be happy. The character in the story had several possessions but was still unhappy. Both themes showed that the things we think are valuable sometimes turn out not to be valuable after all.
Read related link on:
https://brainly.com/question/25553695
-
9 Two bodies of 6 kg and 4 kg masses have their
velocity 5i - 2j +10k and 10î – 2ġ +5ť,
respectively
. Then, the velocity of centre of me
(a) 5ỉ +23 - 8 (b) 7î+ 29 - 8
(2) 7î – 2į +8ỉ (d) 5î – 29 +8k
+
-
Answer:
I don't know he he.
just joking