Answer:
The seal
Explanation:
This question depicts a typical food chain, which is the linear relationship that shows the transfer of energy from one organism to another. Every food chain consists of organism in trophic levels. One organism in each trophic level. The food chain starts with a PRIMARY PRODUCER, which is the algae in this case.
The fish is the PRIMARY CONSUMER because it feeds directly on the algae (producer). The secondary consumer is the SEAL, which feeds on the fish. The summarized food chain is as follows;
Algae → Fish → Seal → Bear → Bacteria
A scientific is a statement that explains what always happens under very specific conditions.
O hypothesis
conclusion
a
theory
O
law
Answer:
law
Explanation:
two ways the rate of a reaction be monitored
Answer: If a reaction produces a gas such as oxygen or carbon dioxide, there are two ways to measure the reaction rate: using a gas syringe to measure the gas produced, or calculating the reduction in the mass of the reaction solution.
Explanation:
https://courses.lumenlearning.com/introchem/chapter/measuring-reaction-rates/#:~:text=If%20a%20reaction%20produces%20a,mass%20of%20the%20reaction%20solution.
This is the site I got it from. I hope this helps.
can someone please help me with this
Answer:
36.4cm2
Explanation:
Which of the following statements are true?
a.
Visible light is composed of different wavelengths.
b.
The shorter the wavelength, the more refraction occurs.
c.
Different wavelengths refract at different angles.
d.
All of the above.
how many moles are 2.54 x 10^29 molecues of H2O
Answer:
[tex]\boxed {\boxed {\sf 421,786.7818 \ mol \ H_2O}}[/tex]
Explanation:
We are asked to convert from molecules of water to moles.
1. Avogadro's Number1 mole of any substance contains the same number of particles (atoms, molecules, formula units, etc). This is Avogadro's Number: 6.022*10²³. In this problem, the particles are molecules of water.
2. Convert Molecules to MolesUse Avogadro's Number to make a ratio.
[tex]\frac {6.022 *10^{23} \ molecules \ H_2O}{1 \ mol \ H_2O}[/tex]
Multiply by the number of molecules given: 2.54 *10²⁹
[tex]2.54 *10^{29} \ molecules \ H_2O \times \frac {6.022 *10^{23} \ molecules \ H_2O}{1 \ mol \ H_2O}[/tex]
Flip the ratio so the units of molecules of water cancel.
[tex]2.54 *10^{29} \ molecules \ H_2O \times \frac {1 \ mol \ H_2O}{6.022 *10^{23} \ molecules \ H_2O}[/tex]
[tex]2.54 *10^{29} \times \frac {1 \ mol \ H_2O}{6.022 *10^{23} }[/tex]
Condense the problem into 1 fraction.
[tex]\frac {2.54 *10^{29} }{6.022 *10^{23} }\ mol \ H_2O[/tex]
[tex]421786.7818 \ mol \ H_2O[/tex]
2.54 *10²⁹ molecules of water are 421, 786.7818 moles of water.
Helpp!! Please it’s balancing equations and I really need help in it it’s so hard theirs two other parts if you can help with those too:))
HELP ME PLS
What is the mass of a water molecule if the hydrogens each have one neutron and the oxygen has eight neutrons?
a. 10
b. 12
c. 16
d. 20
Answer:
H2O
=(1×2)+(8)
=20
Explanation:
We have 1 Hydrogen(H) and 8 Oxygen(O)neutrons . Following the molecule formula, H2O, which means we have 2 Hydrogen that needs to times with 1 neutron;and we have only 1 Oxygen which has 8 neutrons. So 2 (H) have to times 1 and 1(O) have to times 8.
What is anything has mass and volume called?
Answer:
Matter
Explanation:
It has mass and it takes up space
The power of the crane was 68600 W
Caculate the time taken for the crane to do 3430000 J of work
Give the unit
Answer:
t = 50 s
Explanation:
P = W/t
Solving for t,
t = W/P = (3430000 J)/(68600 Watts)
= 50 s
Note: 1 Watt = 1 J/s
According to the question, the time that is taken by the crane which has the power of 68600 W to 3430000 J of work is 50 seconds.
What is Power?Power may be defined as the amount of energy that is significantly transmitted or converted per unit of time. In a more simple sense, it is also characterized as the measure of the rate of doing work.
According to the question,
The power of the crane = 68600 W.
The amount of work that the crane has to do = 3430000 J.
Time may be calculated with the help of the following formula:
Power = Work/time.Time = Work/power = 3430000 J/68600 W = 50 seconds. (where 1 W = 1 J/sec).Therefore, according to the question, the time that is taken by the crane which has the power of 68600 W to 3430000 J of work is 50 seconds.
To learn more about Power, refer to the link:
https://brainly.com/question/1634438
#SPJ2
Riley let his friend borrow $12,750. He wants to be paid back in 57 months and is going to charge his friend a 5.5% interest rate. How much interest will his friend have to pay?
Which statement is true about the square pyramid below?
32 in
| 29 in
The base has an area of 464 square inches.
The base has an area of 928 square inches.
Each of the lateral faces has an area of 464 square inches.
Each of the lateral faces has an area of 928 square inches.
Answer:
C) Each of the lateral faces has an area of 464 square inches.
Explanation:
Have an actual answer
Answer:
CCCCCCCCCCCCCCCCCCC
Explanation:
Each of the lateral faces has an area of 464 square inches.
What is the elevation of point x on rock mountain ( Ik it's blury but please help for 30 points ) ty
Explanation:
A contour map shows two locations, X and Y, 5 kilometers apart. The elevation at location X is 800 meters and the elevation at location Y is 600 meters.
I have 3 questions that I will need help from you. 1. The weight of a millimeter of (NH4)2 HPO4 is? 2. How many moles of alanine, C3H7NO2 are there in 159g of alanine? And 3. Nitric acid is a very important industrial chemical. 1.612 * 10^10 pounds of it were produced in 1992. If the density of nitric acid is 12.53 pounds/gallon. What volume would be occupied by this quantity. (1 gallon =3.7854liters)
Answer:
1. m(NH₄)₂HPO₄ = 1.62 g
2. molesC₃H₇NO₂ = 1.79 moles
3. V = 4.87x10⁹ L
Explanation:
These questions are pretty easy to solve, using the correct expressions and formula.
1. To do this, we just need the density of the (NH₄)₂HPO₄. In this case, the reported density is 1.62 g/mL, therefore:
d = m/V (1)
Where:
d: density (g(mL)
m: mass of the compound (g)
V: volume of the compound (mL)
As we already have the volume, we can solve for m:
m = d * V (2)
m = 1.62 * 1
m(NH₄)₂HPO₄ = 1.62 g2. To do this, we need the atomic weights of each element that composes the alanine.
C: 12 g/mol; H: 1 g/mol; N: 14 g/mol; O: 16 g/mol
With these atomic weight, let's determine the molar mass of alanine:
MM C₃H₇NO₂ = 3(12) + 7(1) + 14 + 2(16) = 89 g/mol
Now to get the moles, we use the following expression:
moles = m/MM (3)
moles = 159 / 89
molesC₃H₇NO₂ = 1.79 moles3. We have the mass and density of the nitric acid, we just solve for Volume from expression (1) of part 1:
V = m/d (3)
V = 1.612x10¹⁰ pounds / 12.53 pounds/gallons
V = 1.287x10⁹ gallons
Converting this to liters:
V = 1.287x10⁹ * 3.7854
V = 4.87x10⁹ LHope this helps
The musculoskeletal system is a combination of two essential organ systems: the
skeletal system that stores calcium and phosphorus, two minerals essential to living
organisms, and the muscular system that facilitates the movement of food through
the digestive system and blood and oxygen through the circulatory system. Which of
the following is NOT a function of the musculoskeletal system?
A)Allow body movement.
B)Stabilizes the body,
C)Produces blood cells.
D)Protects internal organs.
Answer:
B)Stabilizes the body
...........................
Which characteristic most likely identifies an object with a small volume and a large mass?
A.
high temperature
B.
low pressure
C.
low viscosity
D.
high density
Answer:
high density is the ans because density is the mass per unit volume.if mass increases density also increases.
Answer:
High temperature is an object with a small volume and a large mass.
Answer is no A
Why is water often used as the main ingredient in cosmetics?
Answer:
Water forms the basis of almost every type of cosmetic product, including creams, lotions, makeup, deodorants, shampoos and conditioners. Water plays an important part in the process, often acting as a solvent to dissolve other ingredients and forming emulsions for consistency.
Explanation:
Water forms the basis of almost every type of cosmetic product, including creams, lotions, makeup, deodorants, shampoos and conditioners. Water plays an important part in the process, often acting as a solvent to dissolve other ingredients and forming emulsions for consistency.
can someone help me sort this :(
Answer: A. is prey B. is predator C. is habitat D. is comunity E. is plants are producers and plant eating animals consumors F. is food chain G. is food web H. parasite I decomposers and scavengers J. is compete K an adsption
Explanation:
Choose all the right answers. The four major type of animal tissue are: A.cytoplasmic B.support C.connective D.epithelial E.muscular F.nervous LINKS WILL BE REPORTED
Answer: 1. Connective Tissue 2.)Epithelial Tissue 3.)Muscle Tissue 4.)Nervous Tissue
Explanation:
solute separates as a solid when a saturated solution is cooled why
Answer:
When a saturated solution at a high temperature is cooled, why is the solution separated as a solid? When a saturated solution at a high temperature is cooled, inter molecular space between the molecules of the solution decreases. As a result, no more solute can remain in a solution separating out as a solid crystal.
PLEASE HELP ME ASAP!!! 10 POINTS!!
The three equations below represent nuclear fission and nuclear fusion reactions. For each equation, tell whether fission or fusion has occurred and write the missing term in the equation.
A) ²³⁵₉₂ U+n→⁹⁵₃₈Sr+____+2n
B) ³₁H+²₁H→⁴₂H+____
C) ____+n→⁹²₃₉Y+¹⁴⁰₅₃I+2n
Explanation:
A) fission: Iodine-140 (atomic number = 53)
B) fusion: 1 neutron
C) fission: Uranium-233 (atomic number = 92)
What form of pollution can lichens be a good indicator of?
Answer:
Lichens can be used as air pollution indicators, especially of the concentration of sulphur dioxide in the atmosphere. Lichens are organisms that grow in exposed places such as rocks or tree bark. They need to be very efficient at absorbing water and nutrients to grow there.
que es la nanotecnologia ?
porfis lo nesecito urgente para antes de las 10
Answer:
Se aclama la nanotecnología por tener el potencial de aumentar la eficiencia del consumo de energía, ayudar a limpiar el medio ambiente y resolver los principales problemas de salud. Se dice que puede aumentar masivamente la producción de fabricación a costos significativamente reducidos.
espero que esto ayude
go follow my meme page on Insta gram please I just started it
Username is shawty.tedo
Also I hope you have a wonderful day today and get all your work done. I am proud of you!! you have made it through the week and even though school is going back in session for tons of us tomorrow. summer break is almost here!
Just keep pushing yourself you’re almost there! but remember don’t be harsh on yourself and take your time. Take care of yourself and make sure that you’re there for yourself too just like you’re there for others. YOU matter! no matter what you think. we will all get through hard times and it doesn’t matter if it takes years, months, weeks, days, once again it doesn’t matter because You will get through it and you’ll be so proud of yourself just like I am. Don’t give up now. if others try put you down show them that you’re unbreakable and that you’re more worth then they think. Harsh words don’t define your worth. you’re amazing and you are you. you being different from others but that doesn’t mean you’re any less important. you are you and that’s what makes you so unique. Im proud of you Keep going And spread the love
Answer:
Yes I shall follow :)
Explanation:
Thank you, I hope your meme page blows up (with followers :)
3.00 L of a gas is collected at 150 K and then allowed to expand to
15.0 L. What must the new temperature be in degrees C in order to
maintain the same pressure (as required by Charles' Law)?
Answer:
477 ºC
Explanation:
on an isobaric process, an increase on the volume implies an increase on the temperature:
V1/T1 = V2/T2
T2 = V2T1/V1 = 15.0 L×150 K/3.00 L = 750 K
t/ºC = T/K - 273 = 750 K/K - 273
t = 477 ºC
V1: initial volume
T1: initial temperature
V2: final volume
T2: final temperature
Which is NOT true of the Sc3+ ion?
Multiple choice question.
A)
It is a scandium ion with three positive charges.
B)
It was formed by the loss of 4s and 3d electrons.
C)
It has the same electron configuration as Ar.
D)
It is considered to be a different element than a neutral Sc atom.
Answer:
D. It is considered to be a different element than a neutral Sc atom.
The statement i.e. not true of the Sc3+ ion is that it is considered to be a different element than a neutral Sc atom.
The statements that should be considered as true regarding the Sc3 + ion is as follows:
It represents the scandium ion having 3 positive charges.It is created via the loss of 4s & 3d electrons. And, it contains the similar configuration as treated as Ar.Therefore we can conclude that the statement i.e. not true of the Sc3+ ion is that it is considered to be a different element than a neutral Sc atom.
Learn more: brainly.com/question/362440
If 3.4 mole of aluminum carbonate is exposed, how many moles of aluminum oxide will form?
Oxygen (2) element name
Answer:
Oxygen has two allotropic forms, diatomic (O₂) and triatomic (O₃, Ozone).
-TheUnknownScientist
what type of heat is it when a handle of a saucepan get hot when it is on the stove
Answer:
A conduct heat
Explanation:
because in cooking burners on stove will conduct heat energy to the bottom of the pan sitting on top of it. From there, the pan conducts heats to it content.
What are the two products of every neutralization reaction?
Group of answer choices
Salt and Water
Acid and Base
Acid and Hydrogen Gas
Acid and Hydroxide
Answer:
Explanation:
c
When pumping air into a tire, you have to pull back on the pump plunger to fill the pump with air. This increases the volume of the air inside the pump. This increase in volume has what effect on the gases inside the pump?
Question 9 options:
the gas molecules inside the pump are able to spread out more which decreases the pressure of the gas.
the gas molecules inside the pump get compressed and packed closer together which decreases the pressure of the gas.
the gas molecules inside the pump are able to spread out more which increases the pressure of the gas.
the gas molecules inside the pump get compressed and packed closer together which increases the pressure of the gas.
Answer:
Pulling back on the plunger allows you to put in more air into the pump and the more air you have inside a fixed volume, the greater the pressure becomes. (D)