A block with a volume of 24 cm3 has a mass of 1200 g. What is the density of this block

Answer:

Diversity?

Explanation:

Think thats bio

Answer:

1, 2, 2, 1

Explanation:

This is basically the equation we're trying to balance:

Cu + AgNO₃ → Ag + Cu(NO₃)₂

We start with Copper (Cu): There is 1 atom on the reactants'(left) side and 1 atom on the products'(right) side which means it's balanced

The second is Silver (Ag): There is 1 atom on the reactants' side and 1 atom on the products' side which means it's balanced

The third is Nitrogen (N) and there is 1 atom on the reactants' side and 2 atoms on the products' side. We balance it by multiplying the reactants' side by 2

Cu + 2AgNO₃ → Ag + Cu(NO₃)₂

Silver is now imbalanced so we multiply the silver atoms on the product's side by 2

Cu + 2AgNO₃ → 2Ag + Cu(NO₃)₂

If you count them now, the atoms on each side are the same number

1 Copper atom on each side

2 Silver atoms on each side

2 Nitrogen atoms on each side

6 Oxygen atoms on each side (2 sets of 3 oxygen atoms)

1Cu + 2AgNO₃ → 2Ag + 1Cu(NO₃)₂

Answer:

eon,era,period,epoch,and age

Explanation:

Distance is the total length of path one travels.

Displacement is the distance between the initial and final position.

 For example, if your classroom is located 200m from your dormitory, you walk to class and back to your dormitory, your distance is 200m + 200m  = 400m;

  Your displacement is 0m. Your initial and final position is the same so no displacement.

Answer:

Unlike lactic acid fermentation where-in the end product is lactic acid, the 'waste' material in an alcohol respiration is ethanol (an alcohol) and CO2 (carbon dioxide). Human beings have already perfected the use of this process for commercial purposes like in the production of beer, wine and bread

Explanation:

In alcoholic fermentation, pyruvate changes to alcohol and carbon dioxide. This type of fermentation is carried out by yeasts and some bacteria.

Answer:

oxygen

Explanation:

plants use oxygen

Answer:

Rock

Explanation:

Answer:

This question is incomplete

Explanation:

This question is incomplete because of the absence of options. However, Rutherford's model of an atom highlighted the following (which you can use to determine your answer from the missing options)

1) electrons move in fixed circular part (now referred to as electron shells) around a central positively charged nucleus

2) The size of the nucleus is very small relative to the size of the atom

Answer: the answer is 2g because you subtract 32-34 and get 2 and add the get so 2g

Explanation:

2 g of hydrogen reacts with 32 g of oxygen to produce 34 g of hydrogen peroxide.

To determine the amount of hydrogen that reacts with 32 g of oxygen to produce 34 g of hydrogen peroxide ([tex]H_2O_2[/tex]), we need to apply stoichiometry.

First, we find the molar masses:

Molar mass of oxygen ([tex]O_2[/tex]) = 16 g/mol

Molar mass of hydrogen peroxide ([tex]H_2O_2[/tex]) = 34 g/mol (given)

Next, we calculate the number of moles for oxygen and hydrogen peroxide:

Moles of oxygen = mass/molar mass = 32 g / 16 g/mol = 2 moles

Moles of hydrogen peroxide = mass/molar mass = 34 g / 34 g/mol = 1 mole

Since hydrogen peroxide has two hydrogen atoms, it requires twice the moles of hydrogen. Therefore, the moles of hydrogen required are also 2 moles.

Finally, we convert the moles of hydrogen to grams:

Mass of hydrogen = moles × molar mass = 2 moles × 1 g/mol = 2 g

So, 2 g of hydrogen reacts with 32 g of oxygen to produce 34 g of hydrogen peroxide

To know more about hydrogen, here

brainly.com/question/30623765

#SPJ2

Answer:

A.

Explanation:

The car has kinetic energy.

Answer:

6 days

Explanation:

The following data were obtained from the question:

Original amount (N₀) = 100 mg

Amount remaining (N) = 6. 25 mg

Time (t) = 24 days

Half life (t½) =?

Next, we shall determine the decay constant. This can be obtained as follow:

Original amount (N₀) = 100 mg

Amount remaining (N) = 6. 25 mg

Time (t) = 24 days

Decay constant (K) =?

Log (N₀/N) = kt / 2.303

Log (100/6.25) = k × 24 / 2.303

Log 16 = k × 24 / 2.303

1.2041 = k × 24 / 2.303

Cross multiply

k × 24 = 1.2041 × 2.303

Divide both side by 24

K = (1.2041 × 2.303) / 24

K = 0.1155 /day

Finally, we shall determine the half-life of the isotope as follow:

Decay constant (K) = 0.1155 /day

Half life (t½) =?

t½ = 0.693 / K

t½ = 0.693 / 0.1155

t½ = 6 days

Therefore, the half-life of the isotope is 6 days

Answer:

1. 111.54 kJ

2. 944.68 kJ

3. 339 kJ

4. 94.92 kJ

5. 21.0578 kJ

Explanation:

1. The heat required to melt a given quantity of ice is known as the latent heat of fusion, [tex]L^{\circ}_F[/tex], of ice

[tex]L^{\circ}_F[/tex], of ice = 330 J/g

The heat required to melt a given mass of ice = Mass of ice, m × latent heat of fusion, [tex]L^{\circ}_F[/tex], of ice

The heat required to melt 338 grams of ice = 338 g × 330 J/g = 111,540 J = 111.54 kJ

2. The latent heat of vaporization, l, of water = 2260 J/g

The heat required to convert, m grams of water to steam at

The heat required to convert 418 grams of boiling water into steam = 418 g × 2260 J/g = 944680 J = 944.68 kJ

3. To convert 150 grams of boiling water to steam, we have;

Heat required = 150 g × 2260 J/g = 339,000 J = 339 kJ

4. To convert 42.0 grams of boiling water to steam, we have;

Heat required = 42.0 g × 2260 J/g = 94,920 J = 94.92 kJ

5. The specific heat capacity of steam is 1.996 J/(g·°C)

The heat, Q, required to raise a given mass, m, of steam by Δt °C is given as follows;

Q = m × c × Δt

The heat required to raise the temperature of 422 grams of steam from 110.0 °C to 135.0 °C is therefore;

Q = 422 g × 1.996 J/(g·°C) × (135.0 °C - 110.0 °C) = 21057.8 J

The heat required to raise the temperature of 422 grams of steam from 110.0 °C to 135.0 °C = 21057.8 J = 21.0578 kJ

Answer:

The versions of an element with different neutrons have different masses and are called isotopes. The average atomic mass for an element is calculated by summing the masses of the element's isotopes, each multiplied by its natural abundance on Earth.

Explanation:

Answer:

Ajay should pass electric current through the water and connect a bulb to the circuit. If the bulb glows, it means that the water is tap water or else, it is distilled water.

Explanation:

This is because tap water contains little impurities like ions of some salts etc., which help in the conduction of electricity. But, distilled water is pure water and doesn't have any ions present in it. So, it doesn't conduct electricity.

Hope this helped

Ajay can test the distilled water by performing the electricity conduction test.

Distilled water has been the water that has an absence of ions and electrolytes. It has been a poor conductor of electricity.

The tap water has been constituted with minerals, electrolytes, and impurities, which results in the addition of conductivity to the water.

To test whether the water has been distilled or not, the circuit test can be performed The water has dipped wires connected with a battery and a bulb. the distilled water is a poor conductor did not allow the bulb to glow. However, with tap water bulb glow.

Thus, to test the water to be distilled or tap, the electricity conduction test has been performed.

For more information about distilled water, refer to the link:

https://brainly.com/question/2403536

Hey there!

Molar mass SO₂ = 64.066 g/mol

Therefore:

1 mole SO₂ -------------------- 64.066 g

(moles SO₂ ) ??---------------- 5.0 g

( moles SO₂) = 5.0 * 1 / 64.066

(moles SO₂) = 5.0 / 64.066

moles = 0.0780 moles of SO₂

Hope this helps!

Answer:

This is man made and natural

Answer:

B

Explanation:

Because , it is the answer .

Based on the information provided in the chart, the statement that is best supported is Atom X will donate electrons to Atom Y. Option A is the correct answer.

Atom X has 6 valence electrons, which means it has 6 electrons in its outermost energy level. Atom Y has 2 valence electrons, indicating that it has 2 electrons in its outermost energy level. In a chemical reaction, atoms tend to either donate or accept electrons to achieve a stable electron configuration. Option A is the correct answer.

Atom X has more valence electrons than Atom Y, suggesting that it is more likely to donate electrons. Since Atom Y has fewer valence electrons, it is more likely to accept electrons from Atom X. Therefore, based on the number of valence electrons, Atom X will donate electrons to Atom Y in order to achieve a stable electron configuration.

Learn more about Atom here:

https://brainly.com/question/17545314

#SPJ2

Answer:

How much electricity is uses and any repairs

Explanation:

When purchasing an electrical device, the two financial costs you need to consider are the initial price of the device and the operating costs to make use of the device.

The financial cost is the cost of finance charged per item purchased, it may also include miscellaneous charges associated with the usage of the item.

Here, before you purchase the electrical device, think carefully if:

Learn more about financial costs here:

https://brainly.com/question/7269549?referrer=searchResults

The energy of a wave : 8.835.10⁻¹⁷ J

The energy in one photon can be formulated as

Where

h = Planck's constant (6.626.10⁻³⁴ Js)

f = Frequency of electromagnetic waves

f = c / λ

c = speed of light

= 3,10⁸  m/s

λ = wavelength

λ = wavelength  of a wave = 2.25 nm = 2.25 x 10⁻⁹m

[tex]\tt E=h.\dfrac{c}{\lambda}\\\\E=6.626.10^{-34}\times \dfrac{3.10^8}{2.25.10^{-9}}\\\\E=8.835\times 10^{-17}~J[/tex]

Answer:

270

Explanation:

Once you add more mass to something the mass doesn’t go away you add more mass.

hope this helps!

Answer:

Explanation:

The new pressure can be found by using the formula for Boyle's law which is

[tex]P_1V_1 = P_2V_2[/tex]

Since we are finding the new pressure

[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]

From the question we have

[tex]P_2 = \frac{11.2 \times 0.86}{15} = \frac{9.632}{15} \\ = 0.64213333...[/tex]

We have the final answer as

Hope this helps you

Given:

Initial Volume [tex] \sf (V_1) [/tex] = 11.2 L

Initial Pressure [tex] \sf (P_1) [/tex] = 0.860 atm

Final Volume [tex] \sf (V_2) [/tex] = 15.0 L

To Find:

Final Pressure [tex] \sf (P_2) [/tex]

Concept/Theory:

[tex] \bf{ \underline{Boyle's \: Law} \: (Pressure - Volume \: Relationship)}[/tex]

"At constant temperature, the pressure of a fixed amount of gas varies inversely with the volume of the gas."

[tex] \bf{P \propto \dfrac{1}{V} \: (at \: constant \: T \: and \: n)}[/tex]

It can be also stated as "At constant temperature, the product of pressure and volume of fixed amount of a gas remains constant."

[tex] \bf{PV = Constant}[/tex]

If the initial pressure and volume of a fixed amount of gas at constant temperature are [tex] \sf (P_1) [/tex] & [tex] \sf (V_1) [/tex] and final pressure of the gas is [tex] \sf (P_2) [/tex] and volume occupied is [tex] \sf (V_2) [/tex], then according to Boyle's law;

[tex] \bf{P_1V_1 = P_2V_2 = Constant}[/tex]

OR

[tex] \bf{\dfrac{P_1}{P_2} = \dfrac{V_2}{V_1}}[/tex]

Answer:

By using Boyle's Law, we get:

[tex] \rm \longrightarrow \dfrac{0.860}{P_2} = \dfrac{15.0}{11.2} \\ \\ \rm \longrightarrow P_2 = \dfrac{11.2}{15.0} \times 0.860 \\ \\ \rm \longrightarrow P_2 = \dfrac{9.632}{15.0} \\ \\ \rm \longrightarrow P_2 = 0.642 \: atm[/tex]

[tex] \therefore [/tex] Final Pressure [tex] \sf (P_2) [/tex] = 0.642 atm

Answer:

Yes. The scientific sources disputed several of the fitness instructor’s points. For example, he mentioned that GMO foods cause food allergies, but two credible sources disputed this claim. The lab technician, however, supported her findings with verifiable scientific information.

Explanation: plato

Answer: c)winter

HAVE A BLESSED DAY!!!!!

Answer:

The substance is phosphorus or D!

Hope this helps!

Answer:

The heavy particles move across the chamber because of the diffusion property of gas particles. The particles move in straight lines and change directions only when they collide with other molecules or the walls of the chamber.

Explanation:

Answer:

1)conduction

2) convection

3) conduction

4) radiation

5) radiation

6) radiation

7) conduction

8) conduction

9) radiation

10) convection

Explanation:

not 100% sure

Answer:

The polyatomic cation that will react with MnO₄⁻ to form a neutral compound is NH₄⁺ (ammonium ion) to form NH₄MnO₄ (Ammonium permanganate).

Wavelength  = 6.25 x 10⁻¹⁰ m

Energy=3.1805 x 10⁻¹⁶ J

Radiation energy is absorbed by photons

The energy in one photon can be formulated as

[tex]\large{\boxed{\bold{E\:=\:h\:.\:f}}}[/tex]

Where

h = Planck's constant (6,626.10⁻³⁴ Js)

f = Frequency of electromagnetic waves

f = c / λ

c = speed of light

= 3.10⁸

λ = wavelength

Frequency : 4.8 x 10¹⁷ /s

the wavelength  :

[tex]\tt \lambda=\dfrac{c}{f}\\\\\lambda=\dfrac{3.10^8}{4.8.10^{17}}=6.25\times 10^{-10}~m[/tex]

Energy :

[tex]\tt E=6.626.10^{-34}\times 4.8\times 10^{17}=3.1805\times 10^{-16}~J[/tex]

Sorry,for table 3 , I can't find it

Answer:

LI

Explanation:

There is three Li in the start but One Li after