Answer:
P=W/t
W=Pt=0.3kWx50s=15KJ
We have that the energy is used by a blender that has a power of 0.3 kW and which takes 50 seconds is
W=15KJ
From the question we are told
A blender has a power of 0.3 kW. It is used to make a fruit smoothie, which takes 50 seconds. How much energy is used? Give your answer in kilojoulesGenerally the equation for the Power is mathematically given as
P=W/t
Therefore
W=Pt
W=0.3*50
W=15KJ
Therefore
The energy is used by a blender that has a power of 0.3 kW and which takes 50 seconds is
W=15KJ
For more information on this visit
https://brainly.com/question/21811998
A 2000-kg elevator is at rest when its cable breaks. The elevator falls 26 m before it encounters a giant spring at the bottom of the elevator shaft. As the elevator falls, its safety clamp applies a constant frictional force of 17,000 N. 1. List all the forces acting on the elevator after the cable breaks but before it hits the spring. Determine the work done by each force on the elevator. Make sure these work terms have the appropriate signs (positive or negative). 2. Calculate the net work done on the elevator. 3. Use the work-kinetic-energy theorem to determine the speed of the elevator right before it encounters the spring. 4. After the elevator encounters the spring, the spring compresses by 0.6 m before the elevator comes to rest. The safety clamp continues to apply a constant 17,000 N force. List all the forces acting on the elevator while it falls this final 0.6 m. 5. For each force listed in question F4, determine an expression for the work it does on the elevator. Make sure each work term has the appropriate sign (positive or negative). 6. Use the work-kinetic-energy theorem to determine the value of the spring constant k.
Explanation:
work done =force *distance
work done =17000*26
work done=442,000 joules.
HELP PLEASE DUE IN 3 MINUTES
Answer:
Tectonic Plate Movement
Explanation:
Each continent and ocean sits on its own tectonic plate which floats on the Earths upper mantle. They move very little over time.
Answer:
tectonic plates movement
Most stars are _____ compared to the sun.
slightly smaller
much bigger
much smaller
slightly bigger
Suppose you are standing in front of a flat mirror which is mounted to a vertical wall. For this problem you may suppose that your height is 1.70 m and your eyes are 12 cm below the top of your head. What is the smallest mirror that will still allow you to see the full length of your body
Answer:
The right approach is "0.85 m".
Explanation:
According to the question, the diagram will is provided below.
So that as per the diagram,
The values will be:
My height,
AO = 1.70 m
My eyes at,
AB = 12 cm
i.e.,
= 0.12 m
As we can see, the point of incidence lies between the feet as well as the eyes, then
BO = 1.58 m
Now,
⇒ [tex]O'D = \frac{1.58}{2}[/tex]
[tex]=0.79 \ m[/tex]
The point of incidence of the ray will be:
⇒ [tex]CO'=1.70-\frac{0.12}{2}[/tex]
[tex]=1.70-0.06[/tex]
[tex]=1.64 \ m[/tex]
Hence,
The smallest length of the mirror will be:
= [tex]CO'-O'D[/tex]
On substituting the values, we get
= [tex]1.64-0.79[/tex]
= [tex]0.85 \ m[/tex]
Attempt 2 You have been called to testify as an expert witness in a trial involving a head-on collision. Car A weighs 15151515 lb and was traveling eastward. Car B weighs 11251125 lb and was traveling westward at 42.042.0 mph. The cars locked bumpers and slid eastward with their wheels locked for 17.517.5 ft before stopping. You have measured the coefficient of kinetic friction between the tires and the pavement to be 0.7500.750 . How fast (in miles per hour) was car A traveling just before the collision
Answer:
v = 28.98 ft / s
Explanation:
For this problem we must solve it in parts, let's start by looking for the speed of the two cars after the collision
In the exercise they indicate the weight of each car
Wₐ = 1500 lb
W_b = 1125 lb
Car B's velocity from v_b = 42.0 mph westward, car A travels east
let's find the mass of the vehicles
W = mg
m = W / g
mₐ = Wₐ / g
m_b = W_b / g
mₐ = 1500/32 = 46.875 slug
m_b = 125/32 = 35,156 slug
Let's reduce to the english system
v_b = 42.0 mph (5280 foot / 1 mile) (1h / 3600s) = 61.6 ft / s
We define a system formed by the two vehicles, so that the forces during the crash have been internal and the moment is preserved
we assume the direction to the east (right) positive
initial instant. Before the crash
p₀ = mₐ v₀ₐ - m_b v_{ob}
final instant. Right after the crash
p_f = (mₐ + m_b) v
the moment is preserved
p₀ = p_f
mₐ v₀ₐ - m_b v_{ob} = (mₐ + m_b) v
v = [tex]\frac{ m_a \ v_{oa} - m_b \ v_{ob} }{ m_a +m_b}[/tex]
we substitute the values
v = [tex]\frac{ 46.875}{82.03} \ v_{oa} - \frac{35.156}{82.03} \ 61.6[/tex]
v = 0.559 v₀ₐ - 26.40 (1)
Now as the two vehicles united we can use the relationship between work and kinetic energy
the total mass is
M = mₐ + m_b
M = 46,875 + 35,156 = 82,031 slug
starting point. Jsto after the crash
K₀ = ½ M v²
final point. When they stop
K_f = 0
The work is
W = - fr x
the negative sign is because the friction forces are always opposite to the displacement
Let's write Newton's second law
Axis y
N-W = 0
N = W
the friction force has the expression
fr = μ N
we substitute
-μ W x = Kf - Ko
-μ W x = 0 - ½ (W / g) v²
v² = 2 μ g x
v = [tex]\sqrt{ 2 \ 0.750 \ 32 \ 17.5}[/tex]Ra (2 0.750 32 17.5
v = 28.98 ft / s
A spring in a toy gun has a spring constant of 10 N/m and can be compressed 4 cm.
It is then used to shoot a 1 g ball out of the gun. Find the velocity of the ball as it
leaves the gun
In the “Elastic Collision" part of this activity, what happened to the momentum of the red cart after the collision? What happened to the momentum of the blue cart after the collision?
Explanation:
Elastic collision between balls of equal mass viimis 1.5 mys 1.5m/s 1! mis ... Make a data table for the following: mass, velocity and momentum of each ball before ... Part 2 moving faster. ... Summary: Describe the main ideas learned in this activity regarding initial and ... Collision 2: Blue Cart Moving Slower than the Red Cart.
1. Is it possible for the ball to move so quickly that the angle between the cable and vertical post stays at ninety degrees?
2. When the ball is moving in a horizontal circle, what vertical force (or component) balances gravity?
3. What happens to the centripetal force as the length of the cord increases?
Answer:
Tetherball is an interesting game in which two players tries to hit the ball hard so that it goes around the
pole.Each time the player hits the ball, it's orbit rises higher off the ground.Let's understand the physics
behind this.The motion of a tetherball is governed by two forces.These two forces combine to generate a
net force, i.e. centripetal force.If the ball is moving more quickly, it requires a greater centripetal force,
which in turn requires a greater tension force.Since the ball's weight hasn't changed, the angle of the
tension force changes until the ball is in vertical equilibrium.
To access this physics simulation visit: http://goo.gl/xVdwgO Page 02Exploration Series www.ck12.org
Ball Mass : This slider controls the mass of the ball. A ball with more mass will have more inertia, requiring
a greater net force to accelerate it. A ball with more mass will ALSO have a greater gravitational force
acting on it. Watch both of these effects occur when you manipulate this slider.
Cable Length : This slider controls the length of the cable. A longer cable is capable of allowing a greater
circular radius of motion for the ball. It is important to remember that the radius of the circular motion is
NOT equal to the length of the cable. Instead, if you want to understand the size of the circle of the ball's
motion, ignore the cable and just imagine the path of the ball.
Ball Speed : This slider controls the speed of the ball - imagine a kid just hit the ball and it sped up. A ball
moving more quickly is also accelerating more quickly because its velocity is changing as it moves in a
circle (remember that changes in DIRECTION of velocity 'count' as changes to velocity).
Force Diagram : This allows you to turn on or off the diagram of the forces acting on the ball. Look for the
ball to be in vertical force balance, which means the vertical component of tension is canceled by the
gravitational force. The ball should NOT be in horizontal force balance - it is accelerating towards the center
of the circle! It is important to note that this free body diagram should really be moving with the ball so that
To access this physics simulation visit: http://goo.gl/xVdwgO Page 03Exploration Series www.ck12.org
the tension force always points along the cord - we are just showing the forces at the moment the ball is at
the furthest-right on this screen.
Centripetal force vs Tetherball speed : This is a plot of centripetal force required to keep the ball in
circular orbit about the pole as a function of its speed. As expected, a more quickly-moving ball is changing
in velocity more often in a given amount of time, and so is accelerating more. This greater (centripetal, or
center-pointing) acceleration requires a greater net force.
Explanation:
why do the stars rotate
Answer:
Angular momentum
Explanation:
Stars are formed as a result of a collapse of a low-temperature cloud of gas and dust. During the colapse conservation of angular momentum causes any small net rotation of the cloud to increase thus forcing the material into rotating
Fat Albert (the TV show character) runs up the stairs on Monday. On Tuesday, he walks up the same set of stairs. Which day did he do more work?
Answer:
Tuesday bc instead of running he/she was walking bc he/she might not have as much energy
Explanation:
10. A person is about to kick a soccer ball. Consider the leg and foot to be a single rigid body and that it rotates about a fixed axis through the knee joint center. Immediately prior to impact the leg and foot are in the vertical direction and the distal end of the foot has an acceleration of 10 g in the horizontal direction. The muscle force vector makes an angle of 15 degrees with the vertical and has a moment arm of 5 cm from the knee joint center. Assume the person is 1.7 m tall and has a mass of 75 kg. Find the force in the muscle
Answer:
i don't know but i hope you get it right
Explanation
how were the outer planets formed?
Answer:
All planets including the outer larger planets were formed at the same time somewhere around 4.5 Billion years ago.
Explanation:
the young sun drove away most of the gas from the inner solar system, leaving behind the rocky cores also known as the terrestrial planets.
explain why radiation is dangerous for humans
Answer:
because it affects the attom in living things
he inductance of a tuning circuit of an AM radio is 4 mH. Find the capacitance of the circuit required for reception at 1200 kHz.
Answer:
4.4pF
Explanation:
the capacitance of the circuit required for reception is given:
wL = [tex]\frac{1}{wC}[/tex]
w = 2π [tex]f[/tex]
Using both equation
Capacitance is given
C = 1 - 4π2 f2 L
1- 4×9.8969×144×10 10 ×0.004
=4.4pF
What is one disadvantage of sending information over long distances
wirelessly using digital signals?
O A. The signals become weaker the farther the receiver is from the
source.
B. The farther the signals travel, the more slowly they move.
C. The signals become stronger the farther the receiver is from the
source.
O D. The farther the signals travel, the easier they are to detect.
The disadvantage of sending information over long distances wirelessly using digital signals is "the signals become weaker the farther the receiver is from the source."
Since most of the signal which we use for communication are radio signal Radio signal are basically electromagnetic waves.As the wave moves forward it looses its amplitude.So basically radio signal becomes weaker for long distance.What are radio signals?Radio signals or radio waves are a form of electromagnetic wave. Although this may sound complicated, it is possibly sufficient to say that these waves have both electric and magnetic components. They are the same as light rays, ultra-violet and infra-red. The only difference is in the wavelength of the waves.Thus , The disadvantage of sending information over long distances wirelessly using digital signals is "the signals become weaker the farther the receiver is from the source."
Learn more about Radio waves here -
https://brainly.com/question/69373
#SPJ2
A continental polar air mass forms in
a. the Pacific Ocean.
b. northern Canada.
c.
the Gulf of Mexico.
the desert Southwest.
d.
Please select the best answer from the choices provided
А
B
ОООО
С
SnnsbblHShhssbx bdBBB B BBDDBDBX Z .
my uq xbbbnxnjjxjxusjhhhwhhhnn he c x. Yes suhsjjdhhehy yes eirui
M I was going ask m
Iqijjm.ndjbh
Answer:
B. Northern Canada
Explanation:
A continental polar air mass can form over the land during the winter months. In the Northern Hemisphere, it originates in northern Canada or Alaska. As it moves southward, it brings dry weather conditions to the United States. Temperature and humidity levels are both low. Hope this helps :)
A typical laboratory centrifuge rotates at 4000 rpm. Testtubes have to be placed into a centrifuge very carefully because ofthe very large accelerations.
Part A) What is the acceleration at the end of a test tubethat is 10 cm from the axis of rotation?
Part B) For comparison, what is the magnitude of theacceleration a test tube would experience if dropped from a heightof 1.0 m and stopped in a 1.0-ms-long encounter with a hardfloor?
Answer:
A) a_c = 1.75 10⁴ m / s², B) a = 4.43 10³ m / s²
Explanation:
Part A) The relation of the test tube is centripetal
a_c = v² / r
the angular and linear variables are related
v = w r
we substitute
a_c = w² r
let's reduce the magnitudes to the SI system
w = 4000 rpm (2pi rad / 1 rev) (1 min / 60s) = 418.88 rad / s
r = 1 cm (1 m / 100 cm) = 0.10 m
let's calculate
a_c = 418.88² 0.1
a_c = 1.75 10⁴ m / s²
part B) for this part let's use kinematics relations, let's start looking for the velocity just when we hit the floor
as part of rest the initial velocity is zero and on the floor the height is zero
v² = v₀² - 2g (y- y₀)
v² = 0 - 2 9.8 (0 + 1)
v =√19.6
v = -4.427 m / s
now let's look for the applied steel to stop the test tube
v_f = v + a t
0 = v + at
a = -v / t
a = 4.427 / 0.001
a = 4.43 10³ m / s²
A metal pot feels hot to the touch after a short time on the shove. what type of material is the metal pot
A cat dozes on a stationary merry-go-round, at a radius of 7.0 m from the center of the ride. The operator turns on the ride and brings it up to its proper turning rate of one complete rotation every 6.9 s. What is the least coefficient of static friction between the cat and the merry-go-round that will allow the cat to stay in place, without sliding
Answer:
0.6
Explanation:
Given that :
Radius, R = 7m
Period, T = 6.9s
The Coefficient of static friction, μs can be obtained using the relation :
μs = v² / 2gR
Recall, v = 2πR/T
μs becomes ;
μs = (2πR/T)² / 2gR
μs = (4π²R² / T²) ÷ 2gR
μs = (4π²R² / T²) * 1/ 2gR
μs = 4π²R / T²g
μs = 4π²*7 / 6.9^2 * 9.8
μs = 28π² / 466.578
μs = 276.34892 / 466.578
μs = 0.5922887
μs = 0.6
Which DOES NOT happen during the phase change from liquid to solid?
Kinetic energy decreases
Particles move slower
Freezing occurs
Temperature increases
Answer:
Temperature increases
During the phase transition from liquid to solid, kinetic energy diminishes, particles move slower, and freezing occurs.
Phase change:Extreme heat is more likely to occur as a result of rising temperatures, and it will last longer. Heatwaves can indeed be deadly, resulting in manifestations including heat kinks and heat exhaustion, as well as death.
Warmer temperatures have the potential to trigger a cascade of other changes around the world.The greenhouse effect is worsened by these gas emissions, which cause the earth's crust temperature to rise. Burning fossil fuels has the greatest impact on climate change of any human activity.Since in changement from liquid to solid the temperature will decrease.Therefore, the final answer is "Temperature increases".
Find out more about the phase change here:
brainly.com/question/11490613
A truck with a mass of 1370 kg and moving with a speed of 12.0 m/s rear-ends a 593 kg car stopped at an intersection. The collision is approximately elastic since the car is in neutral, the brakes are off, the metal bumpers line up well and do not get damaged. Find the speed of both vehicles after the collision in meters per second.
Answer:
speed of car after collision, v2 =16.1 m/s and of the truck, v1 = 4.6 m/s
Explanation:
Given:
mass of truck M = 1370 kg
speed of truck = 12.0 m/s
mass of car m = 593 kg
collision is elastic therefore,
Applying law of momentum conservation we have
momentum before collision = momentum after collision
1370×12 + 0( initially car is at rest) = 1370×v1+ 593×v2 ....(i)
Also for a collision to be elastic,
velocity of approach = velocity of separation
12 -0 = v2-v1 ....(ii)
using (i) and (ii) we have
So speed of car after collision, v2 =16.1 m/s and of the truck, v1 = 4.6 m/s
Under the influence of its drive force, a snowmobile is moving at a constant velocity along a horizontal patch of snow. When the drive force is shut off, the snowmobile coasts to a halt. The snowmobile and its rider have a mass of 128 kg. Under the influence of a drive force of 195 N, it is moving at a constant velocity whose magnitude is 5.90 m/s. The drive force is then shut off. Find (a) the distance in which the snowmobile coasts to a halt and (b) the time required to do so.
Answer:
a) Δx = 11.6 m
b) t = 3.9 s
Explanation:
a)
Since the snowmobile is moving at constant speed, and the drive force is 195 N, this means that thereis another force equal and opposite acting on it, according to Newton's 2nd Law, due to there is no acceleration present in the horizontal direction .This force is just the force of kinetic friction, and is equal to -195 N (assuming the positive direction as the direction of the movement).Once the drive force is shut off, the only force acting on the snowmobile remains the friction force.According Newton's 2nd Law, this force is causing a negative acceleration (actually slowing down the snowmobile) that can be found as follows:[tex]a = \frac{F_{fr} }{m} = \frac{-195N}{128kg} = -1.5 m/s2 (1)[/tex]
Assuming the friction force keeps constant, we can use the following kinematic equation in order to find the distance traveled under this acceleration before coming to an stop, as follows:[tex]v_{f} ^{2} -v_{o} ^{2} = 2* a* \Delta x (2)[/tex]
Taking into account that vf=0, replacing by the given (v₀) and a from (1), we can solve for Δx, as follows:[tex]\Delta x =- \frac{v_{o}^{2}}{2*a} =- \frac{(5.90m/s)^{2}}{2*(-1.5m/s2)} = 11.6 m (3)[/tex]
b)
We can find the time needed to come to an stop, applying the definition of acceleration, as follows:[tex]v_{f} = v_{o} + a*\Delta t (4)[/tex]
Since we have already said that the snowmobile comes to an stop, this means that vf = 0.Replacing a and v₀ as we did in (3), we can solve for Δt as follows:[tex]\Delta t = \frac{-v_{o} }{a} = \frac{-5.9m/s}{-1.5m/s2} = 3.9 s (5)[/tex]
PLEASE ANSWER THIS WILL MARK AS BRAINLIEST PLEASE USE TRUTHFUL ANSWERS PLEASE
Which best explains why species living in Australia are found nowhere else on Earth? This is an example of Geologic Evolution.
A.
Australia has an ecosystem different from any other area on Earth.
B.
Humans have genetically altered many Australian species in laboratories.
C.
Australian species were genetically altered after a comet hit the landmass.
D.
Australia separated from other continents and species there evolved independently.
Let's assume raspberries are 10 wt% protein solids and the remainder water. When making jam, raspberries are crushed and mixed with sugar, in a 45:55 berry to sugar ratio, by mass. Afterward, the mixture is heated, boiling off water until the remaining mixture is 0.4 weight fraction water, resulting in the final product, jam. How much water, in kilograms, is boiled off per kilogram of raspberries processed
Answer:
The mass of water boiled off is [tex]0.0 \overline{185}[/tex] kg
Explanation:
The given percentage by weight of protein solids in raspberries = 10 weight%
The ratio of sugar to raspberries in ja-m = 45:55
The mass of the mixture after boiling = 0.4 weight fraction water
Let 's' represent the mass of sugar in the mixture, and let 'r' represent the mass of raspberry
The mass of raspberry, r = 1 kg
The percentage by weight of water in raspberry = 90 weight %
The mass of water in 1 kg of raspberry = 90/100 × 1 kg = 0.9 kg
The ratio of the mass of sugar to the mass of raspberry in jam = r/s = 45/55
∴ s = 1 kg × 55/45 = 11/9 kg
The mass of the mixture before boiling = 1 kg + 11/9 kg = 20/9 kg
The weight fraction of water in the remaining mixture after boiling = 0.4 weight fraction
Let 'w' represent the mass of water boiled off, we have;
(0.9 - w)/(20/9 - w) = 0.4
(0.9 - w) = 0.4 × (20/9 - w)
0.9 - w = 8/9 - 0.4·w
9/10 - 8/9 = w - 0.4·w = 0.6·w = (6/10)·w
(81 - 80)/(90) = (6/10)·w
1/90 = (6/10)·w
w = ((10/6) × 1/90) = 1/54
w = 1/54
The mass of water boiled off, w = (1/54) kg = [tex]0.0 \overline{185}[/tex] kg
)) What do these two changes have in common?
mixing chocolate syrup into milk
rain forming in a cloud
) Select all that apply.
Both involve chemical bonds breaking.
Both are changes of state.
Both are only physical changes.
Both are chemical changes.
Answer:
Both are only physical changes
Explanation:
A physical change is a change that does not involve or alter the chemical composition of the substances involved. Physical changes form no new substance and can be easily separated into individual constituents. Example of physical changes are change in state, boiling, melting etc.
According to this question, two processes were given as follows:
1. mixing chocolate syrup into milk
2. rain forming in a cloud
These two processes are similar in the sense that they are both examples of physical changes.
A toy projectile is fired vertically from the ground upward with a velocity of +29 meters per second. It arrives at its maximum altitude in 3.0 seconds. How high does the projectile go?
Answer:
[tex]\boxed{\text{\sf \Large 42 m}}[/tex]
Explanation:
Use height formula
[tex]\displaystyle \sf H=\frac{u^2 sin(\theta)^2}{2g}[/tex]
u is initial velocity
θ = 90° (fired vertically upward)
g is acceleration of gravity
[tex]\displaystyle \sf H=\frac{29^2 \times sin(90 )^2}{2 \times 10}=42.05[/tex]
PLEASE HELP!
what would the answer be?
Answer:
Tie aluminium foil on each end of the battery using rubber band, then use copper wire to attach the led to the aluminium foil...... probably would work
The new roller coaster at Carowinds flies along at 80 m/s. How long does it take to
travel 16000 meters of track?
help meee plisssssssssssssssssssssssssssss
Answer:
Resistance = 0.22 Ohms
Current = 13.63636 A
Explanation:
Total resistance for resistors in parallel is given by:
[tex]\frac{1}{T} =\frac{1}{R1} +\frac{1}{R2} +...+\frac{1}{Rn}[/tex] where n is the number of resistors
[tex]\frac{1}{T} = \frac{1}{1.1} +\frac{1}{1.1} +\frac{1}{1.1} +\frac{1}{1.1} +\frac{1}{1.1}[/tex]
if you solve that you get [tex]\frac{1}{T} = 5/1.1 \\\\T = 1.1/5T = 0.22 Ohms[/tex]
Solve current using V=IR
I=V/R =
I=3/0.22
I = 13.63636 A
A 100 W engine generates 1000 J of energy. How long did it run for?
A. 1 s
B. 10 s
C. 5 s
D. 100 s
Answer:
B. 10 s
Explanation:
Given the following data;
Power = 100 Watts
Energy = 1000 Joules
To find the time;
Power can be defined as the energy required to do work per unit time.
Mathematically, it is given by the formula;
[tex] Power = \frac {Energy}{time} [/tex]
Making time the subject of formula, we have;
[tex] Time = \frac {Energy}{Power} [/tex]
Substituting into the formula, we have;
[tex] Time = \frac {1000}{100} [/tex]
Time = 10 seconds