Answer:
See Explanation
Explanation:
Sound is a mechanical wave. A mechanical wave requires a material medium for propagation. This means that sound waves must be carried in air. If there are no air molecules, sound waves can not travel.
When air is gradually removed from the jar by the pump, the sound intensity from the bell gradually decreases owing to the fact that air which is the medium through which sound waves are propagated is gradually being removed from the jar.
In a double-slit experiment, the third-order maximum for light of wavelength 510 nm is located 17 mm from the central bright spot on a screen 1.6 m from the slits. Light of wavelength 670 nm is then projected through the same slits. Part A How far from the central bright spot will the second-order maximum of this light be located
Answer:
14.9 mm
Explanation:
We know dsinθ = mλ where d = separating of slit, m = order of maximum = 3 and λ = wavelength = 510nm = 510 × 10⁻⁹ m
Also tanθ = L/D where L = distance of m order fringe from central bright spot = 17 mm = 0.017 m and D = distance of screen from slit = 1.6 m
So, sinθ = mλ/d
Since θ is small, sinθ ≅ tanθ
So,
mλ/d = L/D
d = mλD/L
Substituting the values of the variables into the equation, we have
d = 3 × 510 × 10⁻⁹ m × 1.6 m/0.017 m
d = 2448 × 10⁻⁹ m²/0.017 m
d = 144000 × 10⁻⁹ m
d = 1.44 × 10⁻⁴ m
d = 0.144 × 10⁻³ m
d = 0.144 mm
Now, for the second-order maximum, m' of the 670 nm wavelength of light,
m'λ'/d = L'/D where m' = order of maximum = 2, λ' = wavelength of light = 670 nm = 670 × 10⁻⁹ m, d = slit separation = 0.144 mm = 0.144 × 10⁻³ m, L' = distance of second order maximum from central bright spot and D = distance of screen from slit = 1.6m
So, L' = m'λ'D/d
So, substituting the values of the variables into the equation, we have
L' = 2 × 670 × 10⁻⁹ m × 1.6 m/0.144 × 10⁻³ m
L' = 2144 × 10⁻⁹ m²/0.144 × 10⁻³ m
L' = 14888.89 × 10⁻⁶ m
L' = 0.01488 m
L' ≅ 0.0149 m
L' = 14.9 mm
Solve the following problem. A force of 5N is being applied to the right, and a force of
3N is being applied to the left. What is the net force?
A- 15 N
B- 8 N
C- 7N
D- 2N
Answer:
D 2N
Explanation:
these are opposite forces so one becomes negative and the other positive that is
-3+5=2 or 5-3=2
Monochromatic light with wavelength 633 nn passes through a narrow slit and a patternappears on a screen 6.0 m away. The distance on the screen between the centers of thefirst minima on either side of the screen is 32 mm. How wide (in mm) is the slit
Answer:
Explanation:
screen distance D = 6 m .
wavelength of light λ = 633 nm.
slit width = d .
Distance between first minima on either side is width of central maxima
= 2 x λD /d
Given
32 x 10⁻³ = 2 x λD /d
d = 2 x λD /32 x 10⁻³
= 2 x 633 x 10⁻⁹ x 6 / 32 x 10⁻³
= 237.37 x 10⁻⁶ m
= .23737 x 10⁻³ m
= .24 mm .
g A meteoroid is in a circular orbit 600 km above the surface of a distant planet. The planet has the same mass as Earth but has a radius that is 90 % of Earth's (where Earth's radius is approximately 6370 km ). What is the gravitational acceleration of the meteoroid
Answer:
Explanation:
gravitational acceleration of meteoroid
= GM / R²
M is mass of planet , R is radius of orbit of meteoroid from the Centre of the planet .
R = (.9 x 6370 + 600 )x 10³ m
= 6333 x 10³ m
M , mass of the planet = 5.97 x 10²⁴ kg .
gravitational acceleration of meteoroid
= GM / R²
= (6.67 x 10⁻¹¹ x 5.97 x 10²⁴ kg / (6333 x 10³ m)²
9.92m/s²
what is the value of 3 in
24.635
Answer:
3 tens
Explanation:
The value
of 3 in 24.635 is at 3 tens place as the place is two to the left.
The correct answer to the given is question is "0.03".
What is Place Value?The value of each digit in a number is known as place value.For example the 2 in 125 represent 2 tens or 20, however the 2 in 2103 represent 2 thousands or 2000.Frequently, they will only include the letters like Millions, Hundred Thousands, Ten Thousands, Thousands, Hundreds, Tens, Ones, tenths, hundredths, and so on to denote each place. How to solve this question?Let's display the number 24.635 using a place value chart.
Tens -> 2 Ones -> 4 Tenth -> 6 Hundredths -> 3 Thousandths -> 5
The 3 is in Hundredths Place or the value of 3 in 24.635 is 0.03.
Thus, we can conclude that the value of 3 in 24.635 is 0.03 after solving the question.
Learn more about Place Value here:
https://brainly.com/question/569339
#SPJ2
how is intera in baseball
Answer:
Ok I guess
Explanation:
Answer:
what is intera basketball?
Which nucleus completes the following equation?
Answer:
b
Explanation:
b
Answer: c
Explanation:
A p e x
a spring has a spring constant of 330 n/m. how far is the spring compressed when 150 newtons of force are used?
a. 0.0014 meters
b. 0.45 meters
c. 2.2 meters
d. 5.0 meters
show your work
Answer:
I think its B
Explanation:
If two connected points objects pass through the same set of three points, the shapes created by each will be identical, regardless of the order in which each object was plotted. True False
Answer:
True
Explanation:
It Depends on the order in which each object was plotted, if two connected points objects pass through the same set of three points, the shapes created by each point may be different
Select the correct answer. A body travels 10 meters during the first 5 seconds of its travel, and it travels a total of 30 meters over the first 10 seconds of its travel. What is its average speed during the time from t = 5 seconds to t = 10 seconds? A. 2 meters/second B. 3 meters/second C. 4 meters/second D. 5 meters/second E. 6 meters/second
Answer:
2 m/s
Explanation:
...........................
Answer:
A:2 m/s
Explanation:
Plato
A Piatma is a very hot gas comprised of freely moving positive and negative suale particles that are in random motion. Which of the following microscopic properties, together alwama held to have an observable macroscopic effect on the plasma when the plan is placed in the region that contains the magnetic field?
A. The particles have subatomically mal dimensions
B. The particles are charged
C. The particles are not all classified as fundamental particles
D. The particles are in random motion
Answer:
B. The particles are charged
Explanation:
We know that a moving charge particle in magnetic field experiences a magnetic force given by :
[tex]$\vec F = q (\vec v \times \vec B)$[/tex]
In the context, a very hot gas of piatma consists of freely moving positive particles as well as negative particles. Now when the plasma is placed in the region of a magnetic field, then it experiences a force and thus it shows that the particles are charged particles.
Hence , option (B) is correct.
PLEASE HELP I WILL MARK BRAINLYIST!!!!!!!!!
All of the matter in the universe formed after the big bang. Scientists
predicted that hydrogen and helium would be the most abundant elements.
What did scientists discover?
A. The universe has 73% hydrogen and 25% helium, which does not
support the big bang theory
B. Planets are made mostly of other elements, which does not
support the big bang theory
C. Stars are made mostly of other elements, which supports the big
bang theory
D. The universe has 74% hydrogen and 24% helium, which supports
the big bang theory.
Answer:
The answer is D. Here is proof . Plz mark brainliest
Explanation:
What forces are acting on the race car while it is in motion? (hint: there are 3
forces)
Answer:
the forces acting on the car while moving are - frictional force, applied force , air resistance and gravity.:
The temperature of a body is from 200 to 300C.The change of temp at absolute scale is
Answer:
mark me brainliest
Explanation:
The change of temperature at absolute scale is. A. 3.73 K
Answer:
373K
Explanation:
300°c - 200°c =100°c
Absolute scale means Kelvin scale so
0°c= 273°c
100°c = 100 + 273
=373K
to increase the frequency by 2 octave (s), to 4 f , by what factor would you have to increase the tension
Answer:
16
Explanation:
Since frequency in a stretched string f = (n/2L)√T/μ and n, L and μ are constant, f ∝ √T where T = tension in string
Now f₂/f₁ = √T₂/√T₁
Since f₁ = f (frequency at tension T₁) and f₂ = 4f (since its frequency increases by 2 octaves to 4f at tension T₂).
So,
f₂/f₁ = √T₂/√T₁
4f/f = √T₂/√T₁
√T₂/√T₁ = 4
squaring both sides, we have
(√T₂/√T₁)² = 4²
T₂/T₁ = 16
T₂ = 16T₁
So, the tension would have to increase by a factor of 16
A golf club rotates 215 degrees and has a length (radius) equal to 29 inches. The time it took to swing the club was 0.8 seconds. What is the average linear velocity (inches/second) of the golf club
Answer:
The average linear velocity (inches/second) of the golf club is 136.01 inches/second
Explanation:
Given;
length of the club, L = 29 inches
rotation angle, θ = 215⁰
time of motion, t = 0.8 s
The angular speed of the club is calculated as follows;
[tex]\omega = (\frac{\theta}{360} \times 2\pi, \ rad) \times \frac{1}{t} \\\\\omega = (\frac{215}{360} \times 2\pi, \ rad) \times \frac{1}{0.8 \ s} \\\\\omega = 4.69 \ rad/s[/tex]
The average linear velocity (inches/second) of the golf club is calculated as;
v = ωr
v = 4.69 rad/s x 29 inches
v = 136.01 inches/second
Therefore, the average linear velocity (inches/second) of the golf club is 136.01 inches/second
whats is the purpose of the
(1) Armature winding
(2) the commutator
(3) the fan
here's your correct answer.. please copy it..
A current of 5 a flows in a copper wire for 20 s. how many coulombs of charge passed through the wire in this time?
Answer:
I think so too
Explanation:
:*
A graduated cylinder with which of the following gradations would lead to the most precise measurements of volume?
O marked every 10 ml
O marked every mL
O marked every 5 ml
If u shine a light of frequency 375Hz on a double slit setup, and u measure the slit separation to be 950nm and the screen distance to be 4030 nm away what is the distance from the zero order fringe to the first order fringe
Answer:
Y = 3.39 x 10⁶ m
Explanation:
We will use Young's Double Slit formula here:
[tex]Y = \frac{\lambda L}{d}[/tex]
where,
Y = Fringe spacing = ?
λ = wavelength = [tex]\frac{speed\ of\ light}{frequency} = \frac{3\ x\ 10^8\ m/s}{375\ Hz}[/tex] = 8 x 10⁵ m
L = screend distance = 4030 nm = 4.03 x 10⁻⁶ m
d = slit separation = 950 nm = 9.5 x 10⁻⁷ m
Therefore,
[tex]Y = \frac{(8\ x\ 10^5\ m)(4.03\ x\ 10^{-6}\ m)}{9.5\ x\ 10^{-7}\ m}[/tex]
Y = 3.39 x 10⁶ m
Question 15 of 25
You feel warm sitting next to a bright light. Which type of heat transfer are
Experiencing?
Answer:
radiation
Explanation:
A boy stands between two vertical walls and fires a rifle. Under what condition will he hear a single echo from both walls? Calculate the distance between the walls if the single echo is heard six seconds later.
Answer:
d = 1,029 m
Explanation:
When the young man shoots the rifle the sound travels in all directions, if the young man is at the same distance from the two walls, as the speed of the wave is constant, he takes the same time to go to the wall and return for which he hears a single echo.
To calculate the distance let's use the uniform motion relationships
v = d / t
d = v t
As the speed is constant, the time to reach the wall is the same as it takes to go from the wall to the young man,
t = to / 2
t = 6/2
t = 3 s
d = 343 3
d = 1,029 m
please help, im having trouble can you please explain how to do it
Answer:
independent and the second one with the (-8, 1, -3)
Se infla hasta 3dm3 un globo de goma a una temperatura de 20ºC y se lo lleva a una temperatura de
30ºC. Calcular su nuevo volumen
Answer:
V2 = 4.5 dm³
Explanation:
Dados los siguientes datos;
Volumen inicial = 3 dm³
Temperatura inicial = 20°C Temperatura final = 30°C
Para encontrar el nuevo volumen V2, usaríamos la ley de Charles.
Charles afirma que cuando la presión de un gas ideal se mantiene constante, el volumen del gas es directamente proporcional a la temperatura absoluta del gas.
Matemáticamente, Charles está dado por;
[tex] VT = K[/tex]
[tex] \frac{V_{1}}{T_{1}} = \frac{V_{2}}{T_{2}}[/tex]
Dónde;
V1 y V2 representan los volúmenes inicial y final respectivamente.
T1 y T2 representan las temperaturas inicial y final, respectivamente.
Haciendo V2 como la fórmula del sujeto, tenemos;
[tex] V_{2}= \frac{V1}{T1} * T_{2}[/tex]
[tex] V_{2}= \frac{3}{20} * 30 [/tex]
[tex] V_{2}= 0.15 * 30 [/tex]
V2 = 4.5 dm³
b. Why are the resources listed in part (a) considered "renewable"?
Answer:
I would need to see the part a to be more specific but this may help:
resources like solar, water, wind are considered renewable because they will never run out, they can be replenished over and over again. There will always be a sun (and if there wasn't then we'd have bigger conserns than renewable energy) and the wind will always blow. It can never run out because you use too much unlike coal and fossil fuels.
Hope this helps!
g PRACTICE ANOTHER Two trains approach each other on separate but adjacent tracks. Train 1 is traveling at a speed of 30.3 m/s and train 2 at a speed of 22.5 m/s. If the engineer of train 1 sounds his horn which has a frequency of 520 Hz, determine the frequency of the sound heard by the engineer of train 2. (Use 343 m/s as the speed of sound. Enter your answer to the nearest Hz.)
Answer:
f'= 607.8 Hz
Explanation:
This is a Doppler effect exercise due to the relative velocity of the sound source and the observer.
By the time the source and the observer are getting closer the expression is
f ’=[tex]f_o \ \frac{ v+ v_o}{v - v_s}[/tex]
where vs is the speed of the source, vo is the speed of the observer, if the bodies move away the signs are exchanged
in this case, train 1 emits sound, so its speed is v_s = 30.3 m / s and train 2 is the receiver of the sound v₀ = 22.5 m / s
let's calculate
f ’= [tex]520 \ ( \frac{343 + 22.5}{343 - 30.3} )[/tex]520 (343+ 22.5 / 343 - 30.3)
f'= 607.8 Hz
The power output of a car engine running at 2500 rpm is 500 kW . You may want to review (Pages 574 - 577) . Part A How much work is done per cycle if the engine's thermal efficiency is 20.0 %
Answer:
Explanation:
2500 rpm = 2500 / 60 rps ( revolution per second )
= 41.67 rps .
power output = 500 kW
thermal efficiency = 20 %
power input = (100 /20) x 500 kW
= 2500 kW .
work done per second = 2500 kJ
work done per cycle = 2500 / 41.67
= 60 kJ .
We have that the workdone per cycle is mathematically given as
Wc=12.00KJ
Workdone per cycle of engineQuestion Parameters:
The power output of a car engine running at 2500 rpm is 500 kW
Generally the work done per cycle is mathematically given as
Wc=500*1/41.666
Where
=2500rev/60sec
=41.666
Meaning one cycle takes 1/41.666
Hence
Wc=500*1/41.666
Wc=12.00KJ
For more information on work
https://brainly.com/question/756198
Light with a single wavelength falls on two slits separated by 0.510 mm. In the resulting interference pattern on a screen 2.24 m away, adjacent bright fringes are separated by 2.88 mm.What is the wavelength of the light that falls on the slits
Answer: 655.7 nm
Explanation:
Given
The slits are separated by [tex]d=0.510\ mm[/tex]
Distance between slits and screen is [tex]D=2.24\ m[/tex]
Adjacent bright fringes are [tex]\beta =2.88\ mm[/tex] apart
Also, the distance between bright fringes is given by
[tex]\Rightarrow \beta =\dfrac{\lambda D}{d}\quad [\lambda=\text{Wavelength of light}]\\\\\text{Insert the values}\\\\\Rightarrow 2.88\times 10^{-3}=\dfrac{\lambda \cdot 2.24}{0.510\times 10^{-3}}\\\\\Rightarrow \lambda =\dfrac{2.88\times 10^{-3}\times 0.510\times 10^{-3}}{2.24}\\\\\Rightarrow \lambda =0.6557\times 10^{-6}\ m\\\Rightarrow \lambda =655.7\ nm[/tex]
A child with a mass of 20 kg slides down a slide at an angle of 40º from the horizontal. She accelerates at 1.3 m/s2. Calculate the magnitude of the frictional force on the child
Answer:
OK
The component of gravity that aids his sliding down.. is
Mgsin∆
Friction will oppose the motion
Therefore... The net force acting will be
MgSin∆ - Fr=Ma
Where Fr= Frictional Force
Fr = MgSin∆ - Ma
= 20x9.8Sin40 - 20x1.3
=125.99 - 26
=99.99N ~ 100N.
using the image provided, which moon phase is next?
Answer:
Waning Crescent
Answer: waxing crescent
Explanation: