A bank has three types of accounts: checking, savings, and loan. Following are the attributes for each type of account:
CHECKING: Acct No, Date Opened, Balance, Service Charge
SAVINGS: Acct No, Date Opened, Balance, Interest Rate
LOAN: Acct No, Date Opened, Balance, Interest Rate, Payment
Assume that each bank account must be a member of exactly one of these subtypes. Using generalization, develop an EER model segment to represent this situation using the traditional EER notation, the Visio notation, or other tools like Lucidchart / Draw.io. Remember to include a subtype discriminator.

Answer:

4096 VLANs

Explanation:

A VLAN (virtual LAN) is a group of devices on one or more LAN connected to each other without physical connections. VLANs help reduce collisions.

An 802.1Q Ethernet frame header has VLAN ID of 12 bit VLAN field. Hence the maximum number of possible VLAN ID is 4096 (2¹²).  This means that a switch supporting the 802.1Q protocol can have a maximum of 4096 VLANs

A lot of VLANs ID are supported by a switch. The maximum number of VLANs that can be configured on a switch supporting the 802.1Q protocol is 4,094 VLANS.

But that of 0x000 and 0xFFF are set apart. This therefore makes or leaves it as 4,094 possible VLANS limits. Under IEEE 802.1Q, the maximum number of VLANs that is found on an Ethernet network is 4,094.

Learn more about VLANs from

https://brainly.com/question/25867685

Answer:

The answer to this question is given below in the explanation section.

Explanation:

The correct answer to this question is online decision support system. Because the decision support systems process the data, evaluate and predict the decision, and helps the decision-makers,  and offer real time information immediately in making the decision in an organization. So the correct answer to this question is the decision supports system.

Why other options are not correct

Because the transaction processing system can only process the transaction and have not the capability to make the decision for the future. Office support processing system support office work, while the batch processing system process the task into the batch without user involvement.   however, online executive processing does not make decisions and offer timely information to decision-makers in an organization.

Answer:

It is A: Packet metadata is used to route and reassemble information travelling  through the internet.

Explanation:

Step 1: The Internet works by chopping data into chunks called packets. Each packet then moves through the network in a series of hops. Each packet hops to a local Internet service provider (ISP), a company that offers access to the network -- usually for a fee

Step 2: Entering the network

Each packet hops to a local Internet service provider (ISP), a company that offers access to the network -- usually for a fee.

Step 3: Taking flight

The next hop delivers the packet to a long-haul provider, one of the airlines of cyberspace that quickly carrying data across the world.

Step 4: BGP

These providers use the Border Gateway Protocol to find a route across the many individual networks that together form the Internet.

Step 5: Finding a route

This journey often takes several more hops, which are plotted out one by one as the data packet moves across the Internet.

Step 6: Bad information

For the system to work properly, the BGP information shared among routers cannot contain lies or errors that might cause a packet to go off track – or get lost altogether.

Last step: Arrival

The final hop takes a packet to the recipient, which reassembles all of the packets into a coherent message. A separate message goes back through the network confirming successful delivery.

Answer:

a task and a calendar entry

Explanation:

ITS RIGHT

Answer:

its A) a task and a calendar entry

Explanation:

correct on e2020

Answer:

lookup value

Explanation:

Answer:

The correct answer to this question is given below in the explanation section.

Explanation:

in most programming languages, the print() function is used to display a string value to the screen. Because, the print function prints all the string given in it as a parameter.

for example: to print hello world.

we use the function to print hello world as print("hello world").

However, it noted that other options are not correct because the main() function is an entry point of a program and it does not print string value to the screen. while run and show function do not print string value of screen also.

Answer:

in python print()

Answer:

See solution below

See comments for explanations

Explanation:

import java.util.*;

class Main {

 public static void main(String[] args) {

   //PrompT the User to enter a String

   System.out.println("Enter a sentence or phrase: ");

   //Receiving the string entered with the Scanner Object

   Scanner input = new Scanner (System.in);

   String string_input = input.nextLine();

   //Print out string entered by user

   System.out.println("You entered: "+string_input);

   //Call the first method (GetNumOfCharacters)

   System.out.println("Number of characters: "+ GetNumOfCharacters(string_input));

   //Call the second method (OutputWithoutWhitespace)

   System.out.println("String with no whitespace: "+OutputWithoutWhitespace(string_input));

   }

 //Create the method GetNumOfCharacters

   public static int GetNumOfCharacters (String word) {

   //Variable to hold number of characters

   int noOfCharactersCount = 0;

   //Use a for loop to iterate the entire string

   for(int i = 0; i< word.length(); i++){

     //Increase th number of characters each time

     noOfCharactersCount++;

   }

   return noOfCharactersCount;

 }

 //Creating the OutputWithoutWhitespace() method

 //This method will remove all tabs and spaces from the original string

 public static String OutputWithoutWhitespace(String word){

   //Use the replaceAll all method of strings to replace all whitespaces

   String stringWithoutWhiteSpace = word.replaceAll(" ","");

   return stringWithoutWhiteSpace;

 }

}

This is python code.

In python, you are supposed to put a colon at the end of while loops. This code does not have a colon after the while loop, therefore, you need to add a colon to the end of the statement.

The error to be fixed in the while loop is to add a colon at the end of the while statements.

x = 1

while (x<26)

     print(x)

     x = x + 1

This is the right code;

x = 1

while(x < 26):

   print(x)

   x = x + 1

The actual code , the while statement is missing a colon at the end of it.

The code is written in python. In python while or for loops statements always ends with a colon.

In the error code, there was no colon at the end of the while loop.

The right codes which I have written will print the value 1 to 25.

learn more on python loop here: https://brainly.com/question/19129298?referrer=searchResults

public class Drive {

   int miles;

   int gas;

   String carType;

   public String getGas(){

       return Integer.toBinaryString(gas);

   }

   public Drive(String driveCarType){

       carType = driveCarType;

   }

   public static void main(String [] args){

       System.out.println("Hello World!");

   }

}

I'm pretty new to Java myself, but I think this is what you wanted. I hope this helps!

Answer:

C. O(n).

Explanation:

for better understanding, the os is a program that helps in telling how much resources can be used and when processor can be accessed.

to each programme data structures would load and unload every time that a programme is to be run.

while a programme is being managed there would be extra overheads and based on whatever type of os or programme that this is, it may or may not have fixed overhead

from our question overhead is fixed at 100ms

we have,

net time as: 300-100, 510-100, 905-100, 1750-100, 3305-100,

which is, 200, 410, 805, 1650, 3205

when we double 2¹⁰ to 2¹¹ to 2¹² etc, the programme ran is also doubling

this says that run time is same as size of instance n

O(n)

In python:

number = input("Enter a 10-character phone number: ")

for i in number:

   if i.isalpha():

       if i == "A" or i == "B" or i == "C":

           i = "2"

       elif i == "D" or i == "E" or i == "F":

           i = "3"

       elif i == "G" or i == "H" or i == "I":

           i = "4"

       elif i == "J" or i == "K" or i == "L":

           i = "5"

       elif i == "M" or i == "N" or i == "O":

           i = "6"

       elif i == "P" or i == "Q" or i == "R" or i == "S":

           i = "7"

       elif i == "V" or i == "T" or i == "U":

           i = "8"

       elif i == "W" or i == "X" or i == "Y" or i == "Z":

           i = "9"

   print(i, end="")

I hope this helps!

Code:

def phonenumber():

alpha = ['A','B','C','D','E','F','G','H','I','J','K','L','M','N','O','P','Q','R','S','T','U','V','W','X','Y','Z']

n =[2,2,2,3,3,3,4,4,4,5,5,5,6,6,6,7,7,7,7,8,8,8,9,9,9,9]

phone = input('Enter phone number in format of XXX-XXX-XXXX : ').upper()

index = 0

for index in range(len(phone)):

if phone[index].isalpha():

print (n[alpha.index(phone[index])], end = ' ')

else:

print (phone[index], end = ' ')

phonenumber()

Compilation output is attached below:

Learn More:https://brainly.com/question/15687460

Answer: 40, 4

Explanation:

Answer:

True

Operating System

Booting

Answer:

The answer to this question is given below in the explanation section.

Explanation:

The correct answer to this question is an online decision support system. Because the decision support systems process the data, evaluate and predict the decision, and helps the decision-makers,  and offer real-time information immediately in making the decision in an organization. So the correct answer to this question is the decision supports system.

Why other options are not correct

Because the transaction processing system can only process the transaction and have not the capability to make the decision for the future. Office support processing system support office work, while the batch processing system process the task into the batch without user involvement.   however, online executive processing does not make decisions and offer timely information to decision-makers in an organization.

Answer: the answer is A.

Explanation: He has to listen to what the people tell him and think about the information he has and make a choice on what to reply with.

Answer:

B

Explanation:

you can post blog updates in real time as things happen

Answer: Stock market values and news updates

Explanation: These are things that you can follow in real time and that happen in real time (think of something like a livestream)

PLATO/EDMENTUM

Answer:

The answer to this question is given below in the explanation section

Explanation:

The correct option for this question is Animation tab.

Animation tab in PowerPoint ribbon is a unique tab that is not found in other office applications such as in word, excel, outlook, publisher etc.

Because in PowerPoint you can use animation to make your slides animated and all animation can be managed and animation-related settings, you can find in the animation tab.

However, other tabs such as Home, Insert, and View are common in all office applications.

Answer:

To provide standard dialog boxes such as message dialog box, confirm dialog box and input dialog box.

In Java, the import statement is used to include classes or packages from outside sources in your code. This lets you access and use the features of those classes or packages.

To do the above, You need to import JOptionPane in Java because it belongs to a different package from the Math class.

The Math class is a part of the java. lang package, which is automatically included in Java. This package has important classes and interfaces that are used in Java programs. Because the Math class is already included in this package, you don't have to import it separately.

Read more about  JOptionPane here:

https://brainly.com/question/13101293

#SPJ2

Answer:

7. true

8.B

Hopefully those are correct!

Explanation:

Answer:

ok so u have take the 5 and put 6

Explanation:

5-5. Ethernet network design: UTP connections from client PC and server to workgroup switches, 900m fiber optic link between switches, 800 Mbps communication.

5-6. Additional client connects to the same switch, UTP connection, maintains existing fiber optic link, 800 Mbps communication with the server.

5-5. For connecting a single client PC to a single server, both located 900 meters apart and requiring communication at 800 Mbps, the following Ethernet network design can be implemented:

- Client PC and server connect to their respective workgroup switches via UTP.

- Use fiber optic cables for the 900-meter transmission link between the switches.

- Install switches at the client PC and server locations.

- Ensure that the switches support at least 1 Gbps Ethernet speeds to accommodate the required transmission speed.

5-6. In addition to the previous design, for adding another client next to the first client:

- Connect both clients to the same switch.

- Use UTP cables to connect the second client to the switch.

- Ensure the switch supports 1 Gbps Ethernet speeds.

- Maintain the existing fiber optic transmission link between the switches.

- The second client can also communicate with the server at the required 800 Mbps transmission speed.

Learn more about Network Design at:

https://brainly.com/question/7181203

#SPJ2

Answer:

The answer to this question is given below in the explanation section.

Explanation:

The correct answer to this question is the Bar graph.

Because we use this chart type to visually compare values across a few categories when the charts show duration or when the category text is long.

However, we can present information similarly in the bar graph and in column charts, but if you want to create a chart with the horizontal bar then you must use the Bar graph. In an Excel sheet, you can easily draw a bar graph and can format the bar graph into a 2-d bar and 3-d bar chart.

A column chart is used to compare values across a few categories. You can present values in columns and into vertical bars.

A line graph chart is used to show trends over months, years, and decades, etc.

Pie Chart is used to show a proportion of a whole. You can use the Pie chart when the total of your numbers is 100%.

Answer:

Bar graph option A

Explanation:

I did the test

The one that is not a period of the Middle Ages is the High Middle Ages. The correct option is c.

The Middle Ages, which roughly correspond to the years 500 to 1400–1500 BCE, is the term used to describe this time of European history. The phrase was initially used by academics in the 15th century to refer to the time frame between their own era and the dissolution of the Western Roman Empire.

The period between the fall of Imperial Rome and the start of Early Modern Europe is referred to as the “Middle Ages” for this reason. The reason the Middle Ages are known as the Dark Ages is that life was hard and brief in Europe, and contrasted with the orderliness of classical antiquity.

The time period in European history from roughly 500 AD to 1500 AD. This time period's early years are commonly referred to as the Dark Ages.

Therefore, the correct option is c, High Middle Ages.

To learn more about the middle ages, refer to the link:

https://brainly.com/question/26586178

#SPJ6

since this has already been answered, who is your favorite SMP character?

mines Wilbur/ Ghostbur

some people will disagree with me but jshlatt is one of my favorite characters on the dream smp . But my all time favorite characters is ALL of Wilbur's characters

You could try something likes this.

lst = []

n = int(input("Number of elements: ))

for i in range(0, n):

element = int(input("Element: "))

lst.append(element)

Answer:

The solution is provided in the explanation section.

Detailed explanation is provided using comments within the code

Explanation:

import java.util.*;

public class Main {

//The Bubble sort method

public static void bb_Sort(int[] arr) {  

   int n = 10; //Length of array  

   int temp = 0; // create a temporal variable  

   for(int i=0; i < n; i++){  

         for(int j=1; j < (n-i); j++){  

           if(arr[j-1] > arr[j]){  

               // The bubble sort algorithm swaps elements  

               temp = arr[j-1];  

               arr[j-1] = arr[j];  

               arr[j] = temp;  

             }  

         }            

         }  

        }

 public static void main(String[] args) {

   //declaring the array of integers

   int [] array = new int[10];

   //Prompt user to add elements into the array

   Scanner in = new Scanner(System.in);

   //Use for loop to receive all 10 elements

   for(int i = 0; i<array.length; i++){

     System.out.println("Enter the next array Element");

     array[i] = in.nextInt();

   }

   //Print the array elements before bubble sort

   System.out.println("The Array before bubble sort");

   System.out.println(Arrays.toString(array));

   //Call bubble sort method

   bb_Sort(array);  

   System.out.println("Array After Bubble Sort");  

   System.out.println(Arrays.toString(array));

 }

}

Answer:

when a file is double clicked it opens so you can see the file.

Explanation:

I believe the answer is A. because he has to listen to what the people tell him and he information he has to think about and make a choice on what to reply with.

I hope this helps and its correct please let me know if its wrong have a great day//night.

Answer:

5467373737474737377474747