Given :
A ball strikes a wall. It exerts a force of 10 N to the left against the wall and bounces off.
To Find :
What force does the wall exert on the ball.
Solution :
We know, by third law of motion "every motion has equal and opposite reaction".
Ball exert a force of 10 N to the left against the wall.
So, by newton's third law of motion :
Wall will exert same force of 10 N in opposite direction i.e in right direction.
Therefore, force does the wall exert on the ball is 10 N to the right.
Hence, this is the required solution.
Answer:
10 N to the right
Explanation:
edge 2021
1.A runner has a displacement of 20 meters in 5 seconds, what is his velocity
during this time?
Answer:
The required velocity of runner is 4m/s.
What will happen if we increase the friction on a roller coaster?
A. The speed of the roller coaster will increase.
B. The speed of the roller coaster will decrease
C. The speed of the roller coaster will remain constant.
D. The roller coaster will fly away
Answer: B. The speed will decrease.
Explanation:
When you ride a roller coaster, the wheels rub/scrape the rails, creating heat as a result of friction. And friction will slow you down. So increasing the friction on a roller coaster would slow it down.
Answer:
B
Explanation:
Friction opposes motion therefore reducing motion
Diffraction occurs when waves _______ around the edge of a barrier?
Answer:
travels
Explanation:
hope this helps and have a blessed day
Cellular respiration takes place in the mitochondria of cells.
Answer:
True
Because mitochondria is the powerhouse of the cell.
Explanation:
Hope this helps you
Answer:
True
Explanation:
A runner is training and runs past meter mark 65 and starts a stopwatch. After the runner passes meter mark 15 the stopwatch stops at 8 seconds. What was the runners velocity?
Question 5 options:
-6.25 m/s
6.25 m/s
8.13 m/s
-1.88 m/s
Answer:
-6.25 m/s
Explanation:
i took the quiz
The diagram below shows the velocity vectors for two cars that are moving relative to each other.
From the frame of reference of car 1, what is the velocity of car 2?
Answer:
The answer is "[tex]5 \ \frac{m}{s} \ west[/tex]"
Explanation:
[tex]\to \vec{V_1} = (25 \frac{m}{s}) (\hat{-i})\\\\\to \vec{V_2} = (20 \frac{m}{s}) (\hat{-i})\\\\[/tex]
velocity of car | respect to car :
[tex]\to \vec{V_{12}} = \vec{V_1} - \vec{V_2}\\\\[/tex]
[tex]=\vec{-25} \hat{i}+ \vec{20} \hat{i}\\\\= 5 \ \frac{m}{s} \ west[/tex]
Answer:
70 m/s east
Explanation:
if 8000cm3 of liquid drains off an hour glass in one hour, what is the flow rate of water from the clock
Answer:
8000cm³/hr
Explanation:
Given parameters:
Volume of the liquid draining off per hour = 8000cm³
Time taken to drain off = 1hr
Unknown:
Flow rate = ?
Solution:
Flow rate is the volume of fluid that passes per unit of time.
Flow rate = [tex]\frac{volume of fluid}{time taken}[/tex]
Flow rate = [tex]\frac{8000cm^{3} }{1hr}[/tex]
Flow rate = 8000cm³/hr
Geological and atmospheric changes happening over a ______ time scale can cause______ extinctions.
Fill in the blanks folks..
Answer:
Long short
Explanation:
1
Dogs that are bigger are selected to be parents.
2
The parents are bred together, and their offspring will be different sizes.
3
The biggest offspring will be selected and bred together.
4
This cycle continues until the dogs have been selectively bred to be bigger than the current world record size.
5
Selective breeders need to ensure that they are not also selecting for disadvantageous traits, like genetic limb defects.
Ur gonna need this...
Brainliest plzzz..thanks..sorry Messy
Answer:
Geological and atmospheric changes happening over a long time scale can cause short extinctions.
Explanation:
If the density of water is 1000 kg/m², what is the pressure at the bottom of a swimming pool 2m
deep when it is full of water?
The pressure at the bottom when the given tank is full of water will be 19600 Pa.
Pressure can be calculated by the formula,
[tex]\bold {P = \rho h g}[/tex]
Where,
P- pressure = ?
[tex]\bold {\rho}[/tex] - density of water = 1000 kg/m²
h - height of water = 2 m
g - gravity acceleration = 9.8 m/s
Put the values in the formula
[tex]\bold {P = 2 \times 1000 \times 9.8} \\\\\bold {P = 19600\ Pa}[/tex]
Therefore, the pressure at the bottom when the given tank is full of water will be 19600 Pa.
To know more about pressure,
https://brainly.com/question/23603188
What, exactly, is moving across the medium?
Answer:
So waves are everywhere. But what makes a wave a wave? What characteristics, properties, or behaviors are shared by the phenomena that we typically characterize as being a wave? How can waves be described in a manner that allows us to understand their basic nature and qualities?
A wave can be described as a disturbance that travels through a medium from one location to another location. Consider a slinky wave as an example of a wave. When the slinky is stretched from end to end and is held at rest, it assumes a natural position known as the equilibrium or rest position. The coils of the slinky naturally assume this position, spaced equally far apart. To introduce a wave into the slinky, the first particle is displaced or moved from its equilibrium or rest position. The particle might be moved upwards or downwards, forwards or backwards; but once moved, it is returned to its original equilibrium or rest position. The act of moving the first coil of the slinky in a given direction and then returning it to its equilibrium position creates a disturbance in the slinky. We can then observe this disturbance moving through the slinky from one end to the other. If the first coil of the slinky is given a single back-and-forth vibration, then we call the observed motion of the disturbance through the slinky a slinky pulse. A pulse is a single disturbance moving through a medium from one location to another location. However, if the first coil of the slinky is continuously and periodically vibrated in a back-and-forth manner, we would observe a repeating disturbance moving within the slinky that endures over some prolonged period of time. The repeating and periodic disturbance that moves through a medium from one location to another is referred to as a wave.
Hope That Helps!!
Explanation:
HELP ASAP HELP Two tennis balls of the same mass are served at different speeds: 30 m/s and 60 m/s. Which serve has more kinetic energy and by how much? Defend your answer. *
Answer:
The second ball has four times as much kinetic energy as the first ball.
Explanation:
Kinetic Energy
Is the type of energy an object has due to its state of motion. It's proportional to the square of the speed.
The equation for the kinetic energy is:
[tex]\displaystyle K=\frac{1}{2}mv^2[/tex]
Where:
m = mass of the object
v = speed at which the object moves
The kinetic energy is expressed in Joules (J)
Two tennis balls have the same mass m and are served at speeds v1=30 m/s and v2=60 m/s.
The kinetic energy of the first ball is:
[tex]\displaystyle K_1=\frac{1}{2}m\cdot 30^2[/tex]
[tex]\displaystyle K_1=\frac{1}{2}m\cdot 900[/tex]
[tex]K_1=450m[/tex]
The kinetic energy of the second ball is:
[tex]\displaystyle K_2=\frac{1}{2}m\cdot 60^2[/tex]
[tex]\displaystyle K_2=\frac{1}{2}m\cdot 3600[/tex]
[tex]K_2=1800m[/tex]
Being m the same for both balls, the second ball has more kinetic energy than the first ball.
To find out how much, we find the ratio:
[tex]\displaystyle \frac{K_2}{K_1}=\frac{1800m}{450m}[/tex]
Simplifying:
[tex]\displaystyle \frac{K_2}{K_1}=4[/tex]
The second ball has four times as much kinetic energy as the first ball.
Answer:
he second ball has four X as much kinetic energy as the first ball
Explain:
Kinetic Energy Is the type of energy an object has due to its state of motion. It's proportional to the square of the speed
m/the mass of the object
v/the speed at which the object moves
The kinetic energy is expressed in Joules (J)
Two tennis balls have the same mass m and are served at speeds v1=30 m/s and v2=60 m/s.
Being m the same for both balls, the second ball has more kinetic energy than the first ball. So there for The second ball has four times as much kinetic energy as the first ball.
6. A total of 135 J of work is done on a gaseous refrigerant as it undergoes compression. If
the internal energy of the gas increases by 114 J during the process, what is the total amount
of energy transferred as heat? Has energy been added to or removed from the refrigerant as
heat?
Answer:
Eh = 21 [J]
Removed as heat.
Explanation:
This is a case of energy conservation, we have to take into account the energies that go in and out of the system. In this case, 135 [J] of energy are entered in the form of work of the compressor to the chamber where the refrigerant is compressed, now of these 135 [J] 114 [J] were used as internal energy, this internal energy is used to increase the pressure and temperature of the refrigerant.
In this way the rest of the energy of the 135 [J] was lost in the form of heat to determine this loss of energy, we simply perform the arithmetic subtraction.
Eh = 135 - 114 = 21 [J]
Eh = 21 [J]
A group of athletes are trying to turn a large wheel and axle to move a stone. What can they do to move the wheel with less effort?
A subway car moves at a constant speed of 10 m/s over a period of 10 s. What is the instantaneous speed halfway through this motion
Answer: 10 m/s
We're told the speed is constant, so it's not changing throughout the time period given to us. So throughout the entire interval, the speed is 10 m/s.
A pumpkin is thrown horizontally off of a building at a speed of 2.5 m/s and travels a horizontal distance of 12 m before hitting the ground.
What was the initial height of the pumpkin?
What was the final vertical velocity of the pumpkin?
Answer:
-47.04
Explanation:
Divide 12 m by 2.5 m/s which equals 4.8s
And then use 4.8s to multiply it with -9.8
4.8(-9.8)= -47.04 m/s
Hope this helped!! :)
The initial height of the pumpkin is 23.52m and the final vertical velocity of the pumpkin is 47.04 m/s.
Laws of motion:Initial horizontal speed, u = 2.5 m/s
horizontal distance covered , d = 12m
So the time taken is:
t = d/u
t = 12/2.5 s
t = 4.8s
Now, the initial vertical speed, v = 0
So the vertical distance traveled by the pumpkin will be equal to the initial height of the pumpkin:
s = vt + ¹/₂gt²
s = 0.5 × 9.8 × 4.8 m
s = 23.52m
Final vertical velocity:
v' = v + gt
v' = 9.8 × 4.8 m/s
v' = 47.04 m/s
Learn more about laws of motion:
https://brainly.com/question/26083484?referrer=searchResults
Why do we use insulators if they prevent the flow of electricity?
Answer:
letterman is shooting the kids
We use insulators to avoid being electrocuted. electricians use rubber gloves to avoid shock. Cables are insolated with rubber so you can hold them without getting shocked even if it is plugged in.
5. Describe the trip from your home to school using the words
position, distance, displacement, and speed.
My commute to school is a constant distance, but the time it takes to get there fluctuates owing to traffic.
What is displacement?If an object moves with respect to a reference frame, such as when a passenger travels to the back of an airliner or a professor moves to the right with respect to a whiteboard, the item's position changes.
This change in location is described as displacement.
My commute to school is a constant distance, but the time it takes to get there fluctuates owing to traffic,
The initial and the final position of the commute is the same, but the displacement varies with the route which affects my car's speed and where it is in line at stop lights.
Learn more about displacement here, refer to the link;
https://brainly.com/question/10919017
#SPJ2
What is the form of energy that our eyes can detect?
A. Sound Energy
B. Chemical Energy
C. Light Energy
D. Thermal Energy
Answer: C. Light energy.
Explanation:
I need help asappp!!! Help b trcrcrhhvvcc
Answer:
the answer is c. hope this help you out
In which image below is the angle of refraction the greatest?
Answer:
Explanation:
Angle of refraction is the angle made by refracted ray with the normal at the point of incidence . In this figure , refracted ray has been shown by line having arrow-head . Normal has been shown by broken line .
We observe that in figure D , angle made by refracted ray with normal is greatest . So figure D is the answer.
The image where the angle of refraction is the greatest is the image D
What is the angle of refraction?The angle of refraction is the angle that the refracted ray made with the x-axis.
The higher the angle between the refracted ray and the x-axis, the higher the angle of refraction and vice versa.
From the given diagram, we can see that the image where the angle of refraction is the greatest is the image D
Learn more on angle of refraction here: https://brainly.com/question/15838784
with what force will the a car hit a tree if the car has a mass of 3,000 kg and a acceleration of 2m/s^2
Answer:
The answer is 6000 NExplanation:
The force acting on an object given it's mass and acceleration can be found by using the formula
force = mass × acceleration
From the question we have
force = 3000 × 2
We have the final answer as
6000 NHope this helps you
Describe Kinetic Energy.
Momentum is a product of mass and....?
Answer:
Momentum is a product of mass and velocity.
Explanation:
Hope this helps you
Crown me as brainliest:)
A battery and a resistor are wired into a circuit. The resistor dissipates 0.30 W. Now two batteries, each identical to the original one, are connected in series with the resistor. What power does it dissipate?
Answer:
1.2 W
Explanation:
Let the value of resistance be R , emf of battery be E
current i = E / R
power = i² R
= E² x R / R²
= E² / R
Given
E² / R = .30
when two batteries are connected
Total emf = 2E
current = 2E / R
Power = ( 2E / R )² x R
= 4 E² / R
= 4 x .30
= 1.2 W .
Two blocks, with masses m1= 1.5kg and m2= 2.5kg approach each other
with initial velocities; V1= 2.0 m/s and V2i= 3.0 m/s. The two blocks
collide, in a totally inelastic collision, what is their common final velocity
after collision? *
Answer:
2.625 m/s
Explanation:
This is a momentum question. Momentum is conserved which means that all the starting momentum must be accounted for.
1.5 kg * 2 m/s + 2.5 kg * 3 m's = (1.5 + 2.5)kg * x m/s
3 kg m/s + 7.5 kg m/s = 4 kg * x
10.5 kg m/s = 4 kg x
10.5 / 4 = x
x = 2.625 m/s
inelastic means that after the collision, the masses stick together as though they were one.
What effect will the following have on the inertia of a body if
(i) the force acting on it is increased.
(ii) the mass of the body is reduced.
Explanation:
Inertia is the tendency of a body to remain at rest or to do nothing.
It is the resistance to any change in position of body.
When the force on a body increases, the inertia reduces
When the mass is reduced the inertia reduces
According to newton's first law or the law of inertia "an object will remain in its state of rest or of uniform motion unless if it is acted upon by an external force".
An object has a coefficient of kinetic friction of 0.2 and a normal force of 30N. Find the force of kinetic friction.
Answer:
Force of kinetic friction, Fk = 6N
Explanation:
Given the following data;
Coefficient of kinetic friction, μ = 0.2
Normal force, Fn=30N
To find the Force of kinetic friction;
Mathematically, the force of kinetic friction is given by the formula;
Fk = μFn
Where;
Fk represents the force of kinetic friction. μ represents the coefficient of friction. Fn represents the normal force.Substituting into the equation, we have;
Fk = 0.2*30
Fk = 6N
Therefore, the force of kinetic friction is 6N.
A force that is present between two moving objects or surfaces is called kinetic friction. It is estimated in newtons (N) and is calculated by:
[tex]\rm F_{k} =\rm \mu _{\rm k} F_{n}[/tex]
Where, [tex]\rm F_{k}[/tex] = frictional force, [tex]\mu _{\rm k}[/tex] = coefficient, [tex]\rm F_{n}[/tex] = normal force.
The kinetic friction of the object is 6N.
The kinetic friction can be estimated as:
Given,
Coefficient of kinetic friction ([tex]\mu[/tex]) = 0.2Normal force [tex]\rm F_{n}[/tex] = 30 NSubstituting values in the formula:
[tex]\rm F_{k} =\rm \mu _{\rm k} F_{n}[/tex]
[tex]\begin{aligned}\rm F_{k} &= 0.2 \times 30\\\\\rm F_{k} &= 6 \rm N\end{aligned}[/tex]
Therefore, 6N is the frictional force.
To learn more about frictional force follow the link:
https://brainly.com/question/1714663
What is the difference between physical & chemical changes?
Slate whether each is an example of a Physleat (P) or Chemteal (C) property
1. Arock's density
2. boiling point of Gatorade
3. ability of an old car to rust
4. red color of a pe apple
S ability of wood to ignite
8. bitler taste of a lemon
7. melting point of wax
8. hardness of marble
9. Luster (shininess) of gold
boiling point Gatoride
A car accelerates from 20 m/s to 80 m/s in 5 seconds. What is the
average acceleration of the car?
a 20 m/s2
b 12 m/s2
C 4 m/
d 16 m/s2
Answer:
12m/s2
Explanation:
:D (just a smiley, not answer d)
Max, who has a mass of 80 kg and his girlfriend, Allison, who has a mass
of 50 kg are wearing skates and are standing together on a frozen lake. If
they push apart and Max has a velocity of 0.72 m/s in the south direction,
then what is the velocity of Allison? (Neglect friction)
Answer:
I don't know but focus on that she ways less so she will have a higher velocity