The spring constant of the spring is 6.66 N/m.
What is force?The definition of force in physics is: The push or pull on a massed object changes its velocity.
An external force is an agent that has the power to alter the resting or moving condition of a body. It has a direction and a magnitude.
The rotational speed of the 90 g = 0.09 kg mass is: ω = 90 rpm
= 90×2π/60 radian/second.
= 3π radian/second.
So centripetal force acting on the spring = mω²r
This causes the spring to stretch to a length of 12 cm = 0.12 m.
Hence, spring constant: k = mω²r/0.12 = 0.09×(3π)²×0.10/0.12 N/m = 6.66 N/m.
Hence, the spring constant of the spring is 6.66 N/m.
Learn more about force here:
https://brainly.com/question/13191643
#SPJ1
a particle is moving with a constant velocity in the x-direction. when the particle reaches the origin, a constant force is exerted on it in the y-direction. which of the following graphs best shows the path the particle will follow?
Parabolic Up. Since the force is in the y-direction, the particle will continue to move at a constant speed in the x-direction and accelerate in the y-direction. This creates a parabolic path around y-axis.
Force is the power that changes the motion of an item. A force can purpose an object with mass to alternate its pace. Pressure also can be described intuitively as a push or a pull. A force has both value and path, making it a vector quantity.
Pressure is a push or a pull and it affects us in our daily lives because, without force, people might not be capable of open and near stuff or lifting up their arms or legs.
Variety of Forces :
* Muscular Forces, muscular tissues feature to produce an ensuing force which is referred to as 'muscular force'.
* Frictional Forces, while an item modifications its national motion, 'frictional pressure' acts upon it.
* Carried out pressure.
* Tension force.
* Spring force.
* Gravitational pressure.
Learn more about Force here:-https://brainly.com/question/12785175
#SPJ4
a ground wire is an essential component for a circuit breaker. please select the best answer from the choices provided t f
It is false to say that a ground wire is an essential component for a circuit breaker. So, given statement is false.
The reason for why it is off-base on the grounds is that the seriousness of an electric shock relies upon how much flow streaming in it, not on the sort of material by which it is made. An electrical switch is an electrical wellbeing gadget intended to shield an electrical circuit from harm brought about by an overcurrent or cut off. Its essential capability is to hinder current stream to safeguard hardware and to forestall the gamble of fire.
Dissimilar to a wire, which works once and afterward should be supplanted, an electrical switch can be reset (either physically or naturally) to continue typical activity.
Circuit breakers are made in changing sizes, from little gadgets that safeguard low-current circuits or individual domestic devices, to huge switchgear intended to safeguard high voltage circuits taking care of a whole city. The conventional capability of an electrical switch, or circuit, as a programmed method for eliminating power from a broken framework, is frequently truncated as OCPD (Over Flow Insurance Gadget).
Hence, given statement is false.
To know more about Circuit breakers, visit here:
https://brainly.com/question/17040163
#SPJ4
Which states of matter are required for energy transfer to occur when radiant energy is the source?.
No state of matter is required for energy transfer to occur when radiant energy is the source.
Which states of matter are required for energy transfer when radiant energy is the source?When radiant energy is the source, it means we are talking about energy transfer by radiation, so matter is not needed for the energy to be transferred.
An example of this is the Sun as it heats up the Earth by radiation, even through the vacuum of outer space, where there is almost no matter.
Radiant energy is used for radiant heating that can be generated electrically by infrared lamps, or can be absorbed from sunlight and is used to heat water.
To know more about radiant energy, refer
https://brainly.com/question/637839
#SPJ4
1. (10 points) when ashley sat on a rotating stool holding a set of weights close to her body, her rate of rotation changed when she moved the weights away from her body. did her rate or rotation slow down or speed up? why did this occur? did this violate the conservation of energy?
Moment of inertia decreases. due to friction effects associated with the tides driven by the Moon.
Conservation of energy Physics. a fundamental regulation of physics and chemistry stating that the whole power of an isolated system is steady despite inner modifications. it's far most normally expressed as electricity can neither be created nor destroyed and is the basis of the first law of thermodynamics.
According to the regulation of conservation of electricity, electricity can not be created or destroyed. it is able to, however, be converted from one shape to some other. whilst all kinds of strength are considered, the full strength of an isolated gadget stays consistent.
The longer we pass without making enormous adjustments, the greater the risk of world warming and climate exchange come to be in our everyday lives. whilst we burn fossil fuels, they devise an awesome amount of greenhouse gas emissions.
Learn more about the conservation of energy here:-https://brainly.com/question/166559
#SPJ4
a particle of mass 0.195 ???? carries a charge of −2.50×10ି଼ ????. the particle is given an initial horizontal velocity that is due north and has a magnitude of 4.00×10ସ ௦. what are the magnitude and direction of the minimum magnetic field that will keep the particle moving in the earth’s gravitational field in the same horizontal, northward direction?
The magnitude and direction of the minimum magnetic field that will keep the particle moving in the earth’s gravitational field in the same horizontal, northward direction is 1.911 Tesla.
Velocity v = 4×[tex]10^{4}[/tex]
Charge q = 2.5 × [tex]10^{-8}[/tex]
Mass of particle m= 0.195 g = 0.195 × [tex]10^{-3}[/tex] kg
Using the concept of Lorentz force
mg=Bvq
B = mg/vq
Substituting the values
B= 0.195 × [tex]10^{-3}[/tex] × 9.8/4×[tex]10^{4}[/tex]×2.5×[tex]10^{-8}[/tex]
B= 1.911 Tesla
Therefore, To produce upward force, using right hand value and taking particle in negative charge then the magnetic field has to be point in eastwards.
What is gravitational field?
In physics, a gravitational field is a model used to describe the effect of one massive object spreading out in space around it and creating a force on another massive object. Gravitational fields are used to describe gravitational phenomena and are measured in Newtons per kilogram.
To know more about gravitational field, check out:
https://brainly.in/question/7033375
#SPJ4
A mover is trying to lift a piano (slowly) up to a second-story apartment. He use a pulley and ropes to decrease the force needed to raise a heavy load (Figure 1) Figure 1 of 1 B mg Part A But for every meter the load is raised, how much rope must be pulled up? Account for this, using energy concepts O For each meter of the load is raised, 2 m of rope must be pulled up. O For each meter of the load is raised, 2.5 m of rope must be pulled up For each meter of the load is raised, 1.5 m of rope must be pulled up. O For each meter of the load is raised, 0.5 m of rope must be pulled up. Submit Request Answer Provide Feedback
Two metres of rope must be raised in order to move the burden every metre.
Explain why two metres of rope should be raised.
Assuming no dissipative forces are at work over the rope.
The effort is used to draw upward on the rope's free end while the load is hung from the pulley block. The effort required is just half the amount of the load because the load is now suspended from two ropes, each of which is bearing half of the weight.
Hence, two metres of rope must be raised in order to move the burden every metre.
To learn more about forces, follow the link:
https://brainly.com/question/29676926
#SPJ4
a crew of scientsits has b uilt a new space station the space station is shaped lke a wheel of radius r with esssentially all its mass m at the irm. When the crew arrives. The Station will be set roteting at a rate that causes an object at the rim to have radial acceleration g, thereby simulatitng Earth's surface gravity. This is accomplished by
The required time need to fire the rockets to achieve the desired condition is by the relationship of centripetal acceleration by angular acceleration and angular velocity, t = [tex]\sqrt{gR}\frac{M}{2T}[/tex]
What is Centripetal Acceleration?
Centripetal acceleration is a characteristic of an object's motion along a circular path. Centripetal acceleration applies to any item travelling in a circle with an acceleration vector pointing in the direction of the circle's center. In your daily existence, you must have encountered numerous instances of centripetal acceleration. A centripetal acceleration occurs when you drive in a circle, and a centripetal acceleration also occurs when a satellite orbits the Earth. Centripetal refers to being in the middle.
Radius of the spaceship in the form of a wheel = R
Mass of the spaceship concentrated at its rim = M
Radial acceleration of any object placed on the spaceship = g
Thrust exerted by the rocket = T
Time needed to fire the rockets = t
I understand the question you are looking for
"A crew of scientists has built a new space station. The space station is shaped like a wheel of radius R with essentially all its mass M at the rim. When the crew arrives the station will be set rotating at a rate that causes an object at the rim to have radial acceleration g thereby simulating Earth's surface gravity. This is accomplished by two small rockets each with thrust T newtons mounted on the station's rim. How long a time t does one need to fire the rockets to achieve the desired condition?"
To know more Centripetal Acceleration check out:
https://brainly.com/question/14465119
#SPJ4
a jeweler is wearing a 20 d magnifying lens directly in front of his eye. if his near point is a typical 25 cm, how close can he hold a gem that he is inspecting?
If his near point is a typical 25cm, he must hold the gem that he is inspecting at 4.17cm in front of the magnifying lens that the jeweler is wearing.
What is magnifying lens (magnifying glass)?It is a convex lens that is used to produce a magnified image of an object. The lens is usually mounted in a frame with a handle or wear it like an eyeglasses in front of our eye.
How to calculate, how close can he hold a gem that he is inspecting?
First, let's calculate the focal length of the lens.
f = 1 / P
= 1 / 20D
= 0.05m * ( 10^2 cm / 1m)
= 5cm
Convex lens will create a virtual image of a nearby object. Therefore, the image distance is taken as negative, di = -25cm
The position where the gem can be held is calculated with this formula :
1 / f = 1 / do + 1 / di
1 / do = 1 / f - 1 / di
= (1 / 5cm) - (1 / -25cm)
do = 4.17cm
Therefore, the jeweler needs to hold the gem at 4.17cm.
Learn more about magnifying lens (magnifying glass) https://brainly.com/question/9896908
#SPJ4
a stuntman is being pulled along a rough road at a constant velocity, by a cable attached to a moving truck. the cable is parallel to the ground. the mass of the stuntman is 109 kg, and the coefficient of kinetic friction between the road and him is 0.870. find the tension in the cable.pdf
The tension in the cable is 929.334 N.
Solution:
The net force in the horizontal direction is T - F = 0.
Resolving vertically,
N = mg
The relationship between friction and reaction force is
[tex]F = \mu_{k}N[/tex]
[tex]T - \mu_{k} N = 0[/tex]
[tex]T = \mu_{k} mg[/tex]
= [tex](0.870)(109 kg) \times 9.8 \frac{m}{s^{2}}=(0.870)(109kg)[/tex] x 9.8ms²
N = 929.334N.
Tension refers to the force transmitted when a cable, rope, wire, or cord is knotted by forces acting on both ends. The cord is unidirectional along its length and pulls the object evenly at both ends of the cord. As lift increases, the total stress equals the sum of weight and force due to acceleration. As the lift is lowered, the total stress equals the difference in weight and force due to acceleration.
Learn more about Kinetic friction here:- https://brainly.com/question/20241845
#SPJ4
a solid cylinder with a mass of 5 kg and a radius of 30 cm is rolling on a flat surface. the cylinder rolls with a speed of 2 m/s. what its kinetic energy?
The total kinetic energy of a cylinder is 15 J.
Given that, mass = 5 kg
Radius of the cylinder= 30 cm = 30/100 m = 0.3 m
Speed = 2 m/s
Ut = Uk + Ur
where, Uk - translation kinetic energy
Ur - rotational kinetic energy
I is the moment of inertia of the solid cylinder
⇒ 1/2 mv² + 1/2 Iω²
⇒ 1/2 mv² + 1/2 [1/2 m r² * (v/r)²]
⇒ 1/2* 5 * (2)² + 1/2 [1/2* 5 *(0.3)² * (2/0.3)²]
⇒ 10 + 1/2*1/2*5* (0.3)²* 4 / (0.3)²
⇒ 10 + 5 = 15 J
Thus, the total kinetic energy is 15 J.
To know more about kinetic energy:
https://brainly.com/question/29009971
#SPJ4
an ideal fluid flows from left to right through this horizontal pipe, whose interior is hidden. a higher fluid level in the vertical pipes indicates a higher pressure inside the horizontal pipe. at which point does the pipe have the smallest inner diameter?
The pipe at point b will have the least inner diameter based on the supplied statement.
A fluid is what in physics?Any liquid, gas, or substance in general that, while under stress, changes form continuously and is incapable of withstanding tangential or shearing forces.
Briefing:Pipe size and water pressure are related in a moisture pipeline. Because if a pipe's diameter is reduced, the pressure inside the pipeline will rise. According to Bernoulli equation, pressure may be decreased by decreasing the area on conveyance. As a result, there is a high pressure at B and a low diameter at B.
To know more about Fluid visit:
https://brainly.com/question/17123802
#SPJ4
The complete question is-
An ideal fluid flows from left to right through this horizontal pipe, whose interior is hidden. A higher fluid level in the vertical pipes indicates a higher pressure inside the horizontal pipe. At which point does the pipe have the smallest inner diameter? (A higher fluid level in the vertical pipes indicates a higher pressure inside the horizontal pipe).
(A). Point a
(B). Point b
(C). Point c
(D). The diameter doesn't change
(E). We can't determine the diameter of the pipe.
an uncharged capacitor and a resistor are connected in series to a source of emf. if e 5 9.00 v, c 5 20.0 mf, and r 5 100 v, find (a) the time constant of the circuit, (b) the maximum charge on the capacitor, and (c) the charge on the capacitor at a time equal to one time constant after the battery is connected.
a)The time constant of the circuit is 2sec.
b)The maximum charge on the capacitor is 0.18C
c)The charge on the capacitor at one time constant is 0.18×(1-(1/[tex]e^\frac{t}{500}[/tex]).
a)We have resistor resistance 100ohm,capacitor capacitance as 20mf and EMF value as 9V.
We know very well that the time constant of the circuit is defined as the product of Resistance and Capacitance, or in other words
τ=R×C
Therefore,τ=100ohm×20×10⁻³F
=>τ=2sec.
b)The maximum charge on the capacitor is defined as the product of capacitance and voltage applied by the battery.
In other words, Q=C×E
=>Q=20×10⁻³F×9V
=>Q= 180×10⁻³C
=>Q=0.18C
c)Now,we need to find the charge on the capacitor at one constant time.We know very well that charge on the capacitor at any given time is represented by
q(t)=q₀(1−1 /[tex]e\frac{t}{RC}[/tex])
where q₀ is the maximum charge induced on the capacitor
Therefore, q(t)=0.18×(1-(1/[tex]e^\frac{t}{100.5}[/tex])
=>q(t)=0.18×(1-(1/[tex]e^\frac{t}{500}[/tex])
Hence, a)time constant is 2sec,b)maximum charge is 0.18C and c)charge at one time constant on capacitor is q(t)=0.18×(1-(1/[tex]e^\frac{t}{500}[/tex]).
To know more about R-C circuit, visit here:
https://brainly.com/question/14687618
#SPJ4
in a series circuit with three bulbs, adding another bulb will a. make the nearest bulb brighter. b. make some of the bulbs dimmer. c. make all the bulbs brighter. d. make all the bulbs dimmer. please select the best answer from the choices provided a b c d
The addition of a fourth bulb will cause some of the three lights in a series circuit to become dim.
What does an electrical bulb do?A wire filament is used in an electronic bulb, a compact and basic light source that emits light when power is applied. The illustration below shows the incandescent light bulb's construction. Three essential components make up the light bulb. the thread. glass lightbulb
Is a light a bulb?An electrical device that generates light is known as an electric light, lamp, or lightbulb. The most prevalent type of artificial illumination is this. A lamp's base, which is often composed of ceramic, metal, glass, or plastic, attaches it in the socket of such a lighting system, which is also frequently referred to as a "lamp."
To know more about Bulb visit:
https://brainly.com/question/29668994
#SPJ4
when testing the strength of grade a cotton fabric covering an aircraft that requires only intermediate grade, the minimum acceptable strength the fabric must have is
B- 70 percent of the original strength for intermediate fabric.
What is Fabric covering?
Fabrics are adaptable and employed in a wide range of industries, including clothing, agriculture, the military, and obviously the healthcare sector. More than you would imagine, specialty textiles are a part of our daily life. These textiles are generally flame resistant, mould and mildew resistant, and particularly treated with antibacterial properties for the healthcare sector. Why, I presume you ask? Because textiles used often in the medical field need to be antimicrobial and stain resistant from the start, this will help prevent bacteria from growing on the fabric surface.
Learn more about Fabric covering from given link
https://brainly.com/question/23358361
#SPJ4
A slate falls from the roof of a height-rise building. Find how far it falls
a. In the first second
b. In the first two seconds
c. During the third second
In the first second, a slate drops from the roof of a tall building.
Explain about the seconds?Second is the standard unit of time in the International System of Units (SI) (s or sec). In decimal form, one cycle of radiation, or 9,192,631,770 (9.192631770 x 109), is equal to one second. This radiation is produced as the cesium-133 atom moves between two levels.
The symbol for a second, or s, is used to denote SI time. It is described as the fixed numerical value of the cesium frequency, vCs, which is the unaltered ground-state hyperfine transition frequency of the cesium 133 atom. The unit Hz, which is equivalent to s-1, is used to express this frequency. The second is the unit of time measurement.
To learn more about seconds refer to:
https://brainly.com/question/26524032
#SPJ1
in an oscillator consisting of a spring and a block, the amount of kinetic energy reaches maximum when:
In an oscillator consisting of a spring and a block, the amount of kinetic energy reaches maximum when: A. The block passes over the equilibrium point.
What is kinetic energy?In Science, kinetic energy can be defined as a type of energy that's possessed by a physical object or body, especially due to its motion or a change in velocity (acceleration).
This ultimately implies that, a physical object or body would gain more of kinetic energy as it falls back toward the Earth because it is in motion.
In an experiment that is based on an oscillator using both a spring and a block, the amount of kinetic energy that is possessed by the block would reach maximum when it passes over the equilibrium point.
Read more on kinetic energy here: brainly.com/question/1242059
#SPJ1
Complete Question:
In an oscillator consisting of a spring and a block, the amount of kinetic energy reaches maximum when:
The block passes over the equilibrium point.
The block is at maximum positive displacement from the equilibrium point.
The spring's extension is half of the amplitude of oscillation.
The spring is at maximum compression.
None of these.
use newton's method to approximate the zero(s) of the function. continue the iterations until two successive approximations differ by less than 0.001. then find the zero(s) to three decimal places using a graphing utility and compare the results. f(x)
Only one genuine zero exists, and it is found at x = 1.359. newton's method to approximate the zero(s) of the function
The first three decimal places were repeated in the solution after the fourth iteration. I began by assuming that x = 1 was the answer to the Newton's Method formula.
When I entered 1 for x, I received a zero of 5/3.
I entered 5/3 and repeated the process to get 997/687.
I was able to get 1.36976 by plugging in 997/687 and repeating the process.
I entered 1.36976 and repeated the process to get 1.359454.
I entered 1.359454 and repeated the process to get 1.359304.
There was no need to go any further because we are only interested in accuracy to three decimal places.
Learn more about newton here-
https://brainly.com/question/3273157
#SPJ4
A person can see objects clearly only if they are between 0.6 m and 4 m from her eyes. Her optometrist prescribes bifocals that enable her to see distant objects through the top half of the lenses and read papers at a distance of 0.25 m through the lower half. What are the respective powers of the top and bottom lenses?a. -0.25 dB (top lens); +5.7 dB (bottom lens)b. +2.3 dB (top lens); -3.3 dB (bottom lens)c. +4 dB (top lens); -1.7 dB (bottom lens)d. -5.7 dB (top lens); +0.25 dB (bottom lens)e. -0.25 dB (top lens); +2.3 dB (bottom lens)
A person can see objects clearly only if they are between 0.6 m and 4 m from her eyes. Her optometrist prescribes bifocals that enable her to see distant objects through the top half of the lenses and read papers at a distance of 0.25 m through the lower half. What are the respective powers of the top and bottom lenses?a. -0.25 dB (top lens); +5.7 dB (bottom lens)b. +2.3 dB (top lens); -3.3 dB (bottom lens)c. +4 dB (top lens); -1.7 dB (bottom lens)d. -5.7 dB (top lens); +0.25 dB (bottom lens)e. -0.25 dB (top lens); +2.3 dB (bottom lens).
e. -0.25 dB (top lens); +2.3 dB (bottom lens)
docs of optometry (O.D.s/optometrists), the usa's number one eye health care carriers, are the frontline of eye and vision care. doctors of optometry are essential fitness care companies and are diagnosed as physicians underneath Medicare. They study, diagnose, treat and control illnesses and issues of the attention.
Learn more about optometrist here:-
brainly.com/question/7454688
#SPJ4
a two-stage rocket moves in space at a constant velocity of 4900 m/s. the two stages are then separated by a small explosive charge placed between them. immediately after the explosion the velocity of the 1200-kg upper stage is 5700 m/s in the same direction as before the explosion. what is the velocity (magnitude and direction) of the 2400-kg lower stage after the explosion?
The small explosive charge produces only internal forces between the two stages of the rocket, so no external forces. Momentum is conserved.
=
( + )( ⁄) − ( )( ⁄)/
=
. / − . //
= . / /
=. / / = /s
Since this is positive the lower stage is moving in the same direction as the upper stage and both are in the same as the original direction.
Therefore, The small explosive charge produces only internal forces between the two stages of the rocket, so no external forces. Momentum is conserved.
To know more about momentum, check out:
https://brainly.com/question/1042017
#SPJ4
in the proton-proton chain, the mass of four protons is slightly greater than the mass of a helium nucleus. explain what happens to this "lost" mass.
The lost mass or mass defect that results in the mass of four protons being slightly greater than the mass of a helium nucleus is due to the conversion of matter to energy.
What is the lost mass in a nucleus of atoms?The lost mass or the mass defect is the difference in mass that is observed when the mass atoms of elements are compared to the sum of the mass of the constituents of all the particles in the nucleus of the atom.
For example, the mass of four protons is slightly greater than the mass of a helium nucleus that is also composed of four protons.
This loss in mass is known as the mass defect.
The loss in mass or mass defect is a result of the conversion of some of the mass of the particles to energy.
Learn more about mass defect at: https://brainly.com/question/16485729
#SPJ1
if electromagnetic radiation a has a lower frequency than electromagnetic radiation b, then compared to b, the wavelength of a is:____.
a flat, circular loop has 17 turns. the radius of the loop is 11.0 cm and the current through the wire is 0.58 a. determine the magnitude of the magnetic field at the center of the loop (in t).
The magnitude of the magnetic field at the center of the loop 6.28 × 10⁻⁵ T.
A magnetic field is a vector subject that describes the magnetic effect on moving electric charges, electric currents, and magnetic materials. A transferring price in a magnetic area stories a pressure perpendicular to its very own pace and to the magnetic discipline.
calculation:-
Given;
Number of turns n = 17 turns
radius = 11 cm = 0.11m
current i = 0.58 A
Magnetic field at the centre of the loop is
B = μ₀nI//2r
B = 4π × 10⁻⁷ × 17 × 0.58 / 2× 0.11
= 628.4 × 10⁻⁷ T
= 6.28 × 10⁻⁵ T
A magnetic field is a vector field that describes the magnetic influence on moving electric charges, electric-powered currents, and magnetic substances. A transferring rate in a magnetic field story a pressure perpendicular to its own velocity and to the magnetic area.
The magnetic field is the place around a magnet wherein the impact of magnetism is felt. We use the magnetic discipline as a tool to explain how the magnetic force is shipped in the area around and inside something magnetic in nature.
Learn more about the magnetic field here:-https://brainly.com/question/9719792
#SPJ4
How can friends, family members, or teammates
increase the likelihood of you reaching your goals?
a grating with 532 lines/mm is illuminated with light of wavelength 565 nm. what is the angular separation between the two lines formed in order m
The angular separation is 77.8°.
What is angular separation?
It is the angle between two point objects or sightlines, as seen from an observer. It is denoted by θ.
What is bragg's law?
Bragg's law states that "The reflected x-ray beam has the same angle of scattering as the incident beam when an x-ray beam strikes a crystal at an angle. When the path difference (d) is equal to the wavelength's whole number (n), constructive interference will result."
nλ = 2d sin θ
Separation of 532 lines = 1 mm, so the slit separation is,
d= 1 / 532 mm
=[tex](1.8 * 10^-^3mm) (\frac{10^-^3m}{1 mm)}[/tex] = [tex]1.8 * 10^-^6[/tex] m
The Bragg's equation is,
d sinθ = nλ
Rewrite the Bragg's equation for θ
θ = [tex]sin^-^1[/tex] [mλ / d ]
Thus, the angle of diffraction is,
θ = [tex]sin^-^1 [\frac{2(565 * 10^-^9) }{1.8 * 10^-^6}][/tex]
= 38.89°
Angular separation = 2θ
=2(38.89)°
= 77.78°
≅ 77.8°
The angular separation is 77.8°.
To know more angular separation, check out:
https://brainly.com/question/28163826
#SPJ4
an object is traveling with a constant velocity with no unbalanced forces acting upon it. what do we expect this object to do?
While changing direction, the object will continue to move at the same speed.
What are velocity and speed?In way of comparison to kinetic energy, which defines the course and speed of an object's moving, velocity is the amount of mobility along one journey. Alternatively, velocity is a vector and speed is a scalar quantity.
Exactly why is velocity measured?The rate and direction of motion are measured by a vector known as velocity. The speed that something moves in one direction is known as its velocity. Velocity can be used to gauge both the speed of an oncoming car on a busy freeway and the speed of a rocket being launched into space.
To know more about Velocity visit:
https://brainly.com/question/28738284
#SPJ4
in sec. 10.6 of the experiment, your ear simultaneously hears waves from different sources, so it can hear beats from the two speakers. suppose one speaker is driven at 590 hz and the other at 560 hz. what is the beat frequency (in hz)?
It can hear the two speakers' beats because of the frequency of 30 Hz. Consider driving one speaker at 590 Hz and another at 560 Hz.
Why not offer an example of frequency?The quantity of observations that take place during a specific predetermined timeframe is the frequency of the a class interval. Therefore, if 20 individuals between the ages of 5 and 9 are found in the data from our study, the frequency again for 5–9 age range is 20.
What is the purpose of frequency?The temporal rate of evolution seen in oscillatory & periodic events, such as vibrations, speech recordings (sound), radio frequencies, and light, is specified by the frequency, an essential parameter in science and engineering.
Briefing:Beat frequency f = f₂ - f₁
F₂ = 590 Hz
F₁ = 560 Hz
f = 590 - 560
f = 30 Hz
To know more about frequency visit:
https://brainly.com/question/17196899
#SPJ4
Nuclear decay occurs according to first-order kinetics. What is the half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes?.
The half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes is 3.5 minutes.
Rate of first order reaction is given by:[tex]kt = 2.303 * log(R'/R)[/tex]
Where , k = rate of reaction
t= time = 2.5 minutes
R= final amount = 31.7g
R'= initial amount = 55.4g
Putting these values in above equation we get k = 0.22
Now half life of a first order reaction is given by: 0.693/k
Putting k= 0.22 , we get half life = 3.5 minutes.
So the half-life of polonium-218 if a sample decays from 55. 4 g to 31. 7 g in 2. 50 minutes is 3.5 minutes.
To know more about radioactivity visit:
https://brainly.com/question/20039004
#SPJ4
go to the exploring waves discussion and post an answer to this question: waves are used in many practical applications to support work, entertainment, and health. one example is the use of ultrasound imaging to safely track the development of a growing fetus. what is a specific example of a practical application of waves in medicine, entertainment, safety, or other fields? provide a brief explanation of how the properties of waves are useful to that application. in your explanation, make sure you use at least four of the terms about waves introduced in this lesson. respond to at least one other person and explain why you agree or disagree with their comment. make a copy of your discussion post and response, and paste these items into 06.02 exploring waves discussion assessment.
A specific example of a practical application of waves in medicine is the capturing of body structures to detect abnormalities in them.
Abnormality is the giant deviation from normally usual patterns of conduct, emotion, or notion, same time as normality is the absence of illness and the presence of a country of nicely being otherwise referred to as normalcy. It may be hard to attract the line between regular and strange behaviors, specifically in management.
Abnormality consists of 3 extraordinary classes; they're subnormal, supernormal, and paranormal. The technology of unusual psychology studies two types of behaviors: adaptive and maladaptive behaviors.
Apart from genes, similarly, organic elements that contribute effectively to the abnormality of 1's behavior are neurotransmitters and hormones. Imbalance in neurotransmitters like GABA, norepinephrine, and many others., causes unusual neural plasticity or mental dysfunction.
Learn more about Abnormality here:-https://brainly.com/question/23694513
#SPJ4
a 2800. kg rollercoaster is traveling at 18.5 m/s along its track. what is the largest radius loop (in m) that the coaster could successfully go around at that speed?
The Radius loop of 34.88m that coaster could go around with speed of 18.5m/s.
Mass of rollercoaster =2800kg
Speed is 18.5m/s
On a roller coaster, the so-called clothoid loops are the most obvious place where centripetal acceleration takes place. A spiral segment with a variable radius is called a clothoid. The radius at the bottom of a clothoid loop is significantly larger than the radius at the top, in contrast to a circular loop where the radius is a constant value.A clothoid's curvature is less at the bottom of the loop than it is at the top. We will characterize a clothoid loop as being made up of a number of circular sections that overlap or are adjacent to one another in order to simplify our analysis of the physics of clothoid loops.[tex]V=\sqrt{gR}\\ \\V=speed=18.5m/s\\\\g=gravity=9.81m/s^2\\\\R=radius[/tex]
Calculation- squaring both sides of equation.
[tex]V^2=gR\\\\R=V^2/g\\\\R=18.5^2/9.81\\\\R=342.25/9.81\\\\R=34.88m[/tex]
To study more about centripetal acceleration -
https://brainly.com/question/14465119
#SPJ4
a ferris wheel starts from rest and builds up to a final angular speed of 1.9 rad/s while rotating through an angular displacement of 4.9 rad. what is its average angular acceleration?
The average angular acceleration of Ferris wheel is 0.368m/s².
According to their position on the Ferris wheel, riders will feel "heavier" or "lighter" depending on the physics of the Ferris wheel, which is directly related to centripetal acceleration.The passenger gondolas (seats) for the ferris wheel are attached to the rim of an upright wheel. At the support where they are connected to the Ferris wheel, these gondolas can freely pivot. As a result, while the Ferris wheel is spinning, the gondolas always hang downward.ω=1.9rad/s
α=4.9rad
To find angular acceleration.
[tex]w^2=2\alpha s[/tex]
To find α:-
[tex]\alpha =\frac{w^2}{2s}[/tex]
=1.9 x 1.9/9.8
=0.368m/s²
To find angular acceleration-
https://brainly.com/question/29461770
#SPJ4