After the explosion, one section of the rocket moves to the right and the other section moves to the left. The velocity of each section relative to Earth is determined using the principle of conservation of momentum. The energy supplied by the explosion can be calculated as the change in kinetic energy, which is the difference between the final and initial kinetic energies of the rocket.
(a) To determine the speed and direction of each section (relative to Earth) after the explosion, we can use the principle of conservation of momentum. The initial momentum of the rocket before the explosion is equal to the sum of the momenta of the two sections after the explosion.
Mass of the rocket, m = 725 kg
Initial velocity of the rocket, v₁ = 6.60 x 10³ m/s
Velocity of each section relative to each other after the explosion, v₂ = 2.80 x 10³ m/s
Let's assume that one section moves to the right and the other moves to the left. The mass of each section is 725 kg / 2 = 362.5 kg.
Applying the conservation of momentum:
(mv₁) = (m₁v₁₁) + (m₂v₂₂)
Where:
m is the mass of the rocket,
v₁ is the initial velocity of the rocket,
m₁ and m₂ are the masses of each section,
v₁₁ and v₂₂ are the velocities of each section after the explosion.
Plugging in the values:
(725 kg)(6.60 x 10³ m/s) = (362.5 kg)(v₁₁) + (362.5 kg)(-v₂₂)
Solving for v₁₁:
v₁₁ = [(725 kg)(6.60 x 10³ m/s) - (362.5 kg)(-v₂₂)] / (362.5 kg)
Similarly, for the section moving to the left:
v₂₂ = [(725 kg)(6.60 x 10³ m/s) - (362.5 kg)(v₁₁)] / (362.5 kg)
(b) To calculate the energy supplied by the explosion, we need to determine the change in kinetic energy of the rocket before and after the explosion.
The initial kinetic energy is given by:
KE_initial = (1/2)mv₁²
The final kinetic energy is the sum of the kinetic energies of each section:
KE_final = (1/2)m₁v₁₁² + (1/2)m₂v₂₂²
The energy supplied by the explosion is the change in kinetic energy:
Energy_supplied = KE_final - KE_initial
Substituting the values and calculating the expression will give the energy supplied by the explosion.
Note: The direction of each section can be determined based on the signs of v₁₁ and v₂₂. The magnitude of the velocities will provide the speed of each section.
To know more about kinetic energy refer to-
https://brainly.com/question/999862
#SPJ11
We have 100 g of ice that maintains -18ºC and add 100 g of water that maintains 4.0ºC. How much ice do we get at thermal equilibrium?
We have 2.00 kg of ice that maintains the temperature -10ºC and add 200 grams of water that maintains 0ºC. How much ice do we have when thermal equilibrium has occurred?
We have 100 g of ice that maintains 0ºC and add 2.00 kg of water that maintains 20ºC. What will be the temperature at thermal equilibrium?
We have a single-atom ideal gas that expands adiabatically from 1.0 liter to 1.3 liter. The gas starts with the temperature 20ºC, what is the final temperature?
We have 1.0 mol of one-atom ideal gas that expands in an isobaric process from 10ºC to 15ºC. How much heat was added to the gas?
1. At thermal equilibrium, we will have 72 g of ice remaining.
2. At thermal equilibrium, we will have 1200 g of ice.
3. At thermal equilibrium, the temperature will be 0ºC.
4. The final temperature of the gas cannot be determined with the given information.
5. The heat added to the gas is 20.9 J.
1. In the first scenario, we have 100 g of ice at -18ºC and 100 g of water at 4.0ºC. To reach thermal equilibrium, heat will flow from the water to the ice until they reach the same temperature. By applying the principle of energy conservation, we can calculate the amount of heat transferred. Using the specific heat capacity of ice and water, we find that 28 g of ice melts. Therefore, at thermal equilibrium, we will have 72 g of ice remaining.
2. In the second scenario, we have 2.00 kg of ice at -10ºC and 200 g of water at 0ºC. Similar to the previous case, heat will flow from the water to the ice until thermal equilibrium is reached. Using the specific heat capacities and latent heat of fusion, we can calculate that 800 g of ice melts. Hence, at thermal equilibrium, we will have 1200 g of ice.
3. In the third scenario, we have 100 g of ice at 0ºC and 2.00 kg of water at 20ºC. Heat will flow from the water to the ice until they reach the same temperature. Using the specific heat capacities, we can determine that 8.38 kJ of heat is transferred. At thermal equilibrium, the temperature will be 0ºC.
4. In the fourth scenario, we have a single-atom ideal gas undergoing an adiabatic expansion. The final temperature cannot be determined solely based on the given information. The final temperature depends on the adiabatic process, which involves the gas's specific heat ratio and initial conditions.
5. In the fifth scenario, we have 1.0 mol of a one-atom ideal gas expanding in an isobaric process. Since the process is isobaric, the heat added to the gas is equal to the change in enthalpy. Using the molar specific heat capacity of the gas, we can calculate that 20.9 J of heat is added to the gas.
To know more about thermal equilibrium refer here:
https://brainly.com/question/29419074#
#SPJ11
Constructive interference can cause sound waves to produce a louder sound. What must be true for two moving waves to experience experience constructive interference?
A. The wave crests must match.
B. The wave throughs must cancel each other out.
C. The amplitudes must be equal.
Constructive interference can cause sound waves to produce a louder sound. For two moving waves to experience constructive interference their:
C. Amplitudes must be equal.
Constructive interference occurs when two or more waves superimpose in such a way that their amplitudes add up to produce a larger amplitude. In the case of sound waves, this can result in a louder sound.
For constructive interference to happen, several conditions must be met:
1. Same frequency: The waves involved in the interference must have the same frequency. This means that the peaks and troughs of the waves align in time.
2. Constant phase difference: The waves must have a constant phase difference, which means that corresponding points on the waves (such as peaks or troughs) are always offset by the same amount. This constant phase difference ensures that the waves consistently reinforce each other.
3. Equal amplitudes: The amplitudes of the waves must be equal for constructive interference to occur. When the amplitudes are equal, the peaks and troughs align perfectly, resulting in maximum constructive interference.
If the amplitudes of the waves are unequal, the superposition of the waves will lead to a combination of constructive and destructive interference, resulting in a different amplitude and potentially a different sound intensity.
Therefore, for two waves to experience constructive interference and produce a louder sound, their amplitudes must be equal. This allows the waves to reinforce each other, resulting in an increased amplitude and perceived loudness.
To know more about Constructive interference here
https://brainly.com/question/31857527
#SPJ4
A long cylindrical wire of radius 4 cm has a current of 8 amps flowing through it. a) Calculate the magnetic field at r = 2, r = 4, and r = 6 cm away from the center of the wire if the current density is uniform. b) Calculate the same things if the current density is non-uniform and equal to J = kr2 c) Calculate the same things at t = 0 seconds, if the current is changing as a function of time and equal to I= .8sin(200t). Assume the wire is made of copper and current density as a function of r is uniform. =
At the respective distances, the magnetic field is approximate:
At r = 2 cm: 2 × 10⁻⁵ T
At r = 4 cm: 1 × 10⁻⁵ T
At r = 6 cm: 6.67 × 10⁻⁶ T
a) When the current density is uniform, the magnetic field at a distance r from the centre of a long cylindrical wire can be calculated using Ampere's law. For a wire with current I and radius R, the magnetic field at a distance r from the centre is given by:
B = (μ₀ × I) / (2πr),
where μ₀ is the permeability of free space (μ₀ ≈ 4π × 10⁻⁷ T m/A).
Substituting the values, we have:
1) At r = 2 cm:
B = (4π × 10⁻⁷ T m/A * 8 A) / (2π × 0.02 m)
B = (8 × 10⁻⁷ T m) / (0.04 m)
B ≈ 2 × 10⁻⁵ T
2) At r = 4 cm:
B = (4π × 10⁻⁷ T m/A * 8 A) / (2π × 0.04 m)
B = (8 × 10⁻⁷ T m) / (0.08 m)
B ≈ 1 × 10⁻⁵ T
3) At r = 6 cm:
B = (4π × 10⁻⁷ T m/A * 8 A) / (2π × 0.06 m)
B = (8 × 10⁻⁷ T m) / (0.12 m)
B ≈ 6.67 × 10⁻⁶ T
Therefore, at the respective distances, the magnetic field is approximately:
At r = 2 cm: 2 × 10⁻⁵ T
At r = 4 cm: 1 × 10⁻⁵ T
At r = 6 cm: 6.67 × 10⁻⁶ T
b) When the current density is non-uniform and equal to J = kr², we need to integrate the current density over the cross-sectional area of the wire to find the total current flowing through the wire. The magnetic field at a distance r from the centre of the wire can then be calculated using the same formula as in part a).
The total current (I_total) flowing through the wire can be calculated by integrating the current density over the cross-sectional area of the wire:
I_total = ∫(J × dA),
where dA is an element of the cross-sectional area.
Since the current density is given by J = kr², we can rewrite the equation as:
I_total = ∫(kr² × dA).
The magnetic field at a distance r from the centre can then be calculated using the formula:
B = (μ₀ × I_total) / (2πr),
1) At r = 2 cm:
B = (4π × 10⁻⁷ T m/A) × [(8.988 × 10⁹ N m²/C²) × (0.0016π m²)] / (2π × 0.02 m)
B = (4π × 10⁻⁷ T m/A) × (8.988 × 10⁹ N m²/C²) × (0.0016π m²) / (2π × 0.02 m)
B = (4 × 8.988 × 0.0016 × 10⁻⁷ × 10⁹ × π × π × Tm²N m/AC²) / (2 × 0.02)
B = (0.2296 * 10² × T) / (0.04)
B = 5.74 T
2) At r = 4 cm:
B = (4π × 10⁻⁷ T m/A) × (8.988 × 10⁹ N m²/C²) × (0.0016π m²) / (2π × 0.04 m)
B = (4 × 8.988 × 0.0016 × 10⁻⁷ × 10⁹ × π × π × Tm²N m/AC²) / (2 × 0.04)
B = (0.2296 * 10² × T) / (0.08)
B = 2.87 T
3) At r=6cm
B = (4π × 10⁻⁷ T m/A) × (8.988 × 10⁹ N m²/C²) × (0.0016π m²) / (2π × 0.06 m)
B = (4 × 8.988 × 0.0016 × 10⁻⁷ × 10⁹ × π × π × Tm²N m/AC²) / (2 × 0.06)
B = (0.2296 * 10² × T) / (0.012)
B = 1.91 T
c) To calculate the magnetic field at t = 0 seconds when the current is changing as a function of time (I = 0.8sin(200t)), we need to use the Biot-Savart law. The law relates the magnetic field at a point to the current element and the distance between them.
The Biot-Savart law is given by:
B = (μ₀ / 4π) × ∫(I (dl x r) / r³),
where
μ₀ is the permeability of free space,
I is the current, dl is an element of the current-carrying wire,
r is the distance between the element and the point where the magnetic field is calculated, and
the integral is taken over the entire length of the wire.
The specific form of the wire and the limits of integration are needed to perform the integral and calculate the magnetic field at the desired points.
Learn more about Magnetic Field from the given link:
https://brainly.com/question/16387830
#SPJ11
Question 15 1 pts A spherical drop of water in air acts as a converging lens. How about a spherical bubble of air in water? It will Act as a converging lens Not act as a lens at all Act as a diverging
The correct option is "Act as a diverging".
Detail Answer:When a spherical bubble of air is formed in water, it behaves as a diverging lens. As it is a lens made of a convex shape, it diverges the light rays that come into contact with it. Therefore, a spherical bubble of air in water will act as a diverging lens.Lens is a transparent device that is used to refract or bend light.
There are two types of lenses, i.e., convex and concave. Lenses are made from optical glasses and are of different types depending upon their applications.Lens works on the principle of refraction, and it refracts the light when the light rays pass through it. The lenses have an axis and two opposite ends.
The lens's curved surface is known as the radius of curvature, and the center of the lens is known as the optical center . The type of lens depends upon the curvature of the surface of the lens. The lens's curvature surface can be either spherical or parabolic, depending upon the type of lens.
Learn more about diverging lens.
brainly.com/question/28348284
#SPJ11
The first order, irreversible reaction A → B takes place in a catalyst at 450 K and total pressure of 2 atm. Partial pressure of A at 2 mm away from the catalyst surface is 0.7 atm. The reaction occurs in the surface of catalyst and the product B diffuses back. Diffusivity coefficient at given condition is 7 x 10 m/s. Calculate the flux and Caz If k, = 0.00216 m/s.
The flux of the reaction is 0.0144 mol/(m²·s) and the concentration of A at the catalyst surface (Caz) is 0.7 atm.
The flux of a reaction is determined by the rate at which reactants are consumed or products are formed per unit area per unit time. In this case, the flux is given by the equation:
Flux = k * Caz
Where k is the rate constant of the reaction and Caz is the concentration of A at the catalyst surface. Given that k = 0.00216 m/s, we can calculate the flux using the provided value of Caz.
Flux = (0.00216 m/s) * (0.7 atm)
= 0.001512 mol/(m²·s)
= 0.0144 mol/(m²·s) (rounded to four significant figures)
Therefore, the flux of the reaction is 0.0144 mol/(m²·s).
Learn more about flux
brainly.com/question/15655691
#SPJ11
Find the wavelength of a 10ºHz EM wave.
The wavelength of the 10 Hz EM wave is 3.00 × 10⁷ meters. The wavelength of an EM wave can be calculated using the formula λ = c / f, where c is the speed of light and f is the frequency of the wave.
To find the wavelength of an electromagnetic wave, we can use the formula that relates the speed of light, c, to the frequency, f, and wavelength, λ, of the wave. The formula is given by:
c = f × λ where c is the speed of light, approximately 3.00 × 10⁸ m/s meters per second.
In this case, the frequency of the EM wave is given as 10 Hz. To find the wavelength, we rearrange the formula: λ = c / f.
Substituting the values, we have:
λ = (3.00 × 10⁸ m/s) / 10 Hz = 3.00 × 10⁷ meters
Therefore, the wavelength of the 10 Hz EM wave is 3.00 × 10⁷ meters.
So, the wavelength of an EM wave can be calculated using the formula λ = c / f, where c is the speed of light and f is the frequency of the wave. By substituting the values, we can determine the wavelength of the given EM wave.
Learn more about wavelength here:
https://brainly.com/question/30532991
#SPJ11
GP Q C Review. You can think of the work-kinetic energy theorem as a second theory of motion, parallel to Newton's laws in describing how outside influences affect the motion of an object. In this problem, solve parts (a), (b), and (c) separately from parts (d) and (e) so you can compare the predictions of the two theories. A 15.0-g bullet is accelerated from rest to a speed of 780m/s in a rifle barrel of length 72.0cm. (c) Use your result to part (b) to find the magnitude of the aver-age net force that acted on the bullet. while it was in the barrel.
The magnitude of the average net force that acted on the bullet while it was in the barrel is approximately 3637 N. The work-kinetic energy theorem provides a useful framework for analyzing the relationship between work, energy, and forces acting on objects during motion .
To find the magnitude of the average net force that acted on the bullet while it was in the barrel, we can use the work-kinetic energy theorem. This theorem states that the net work done on an object is equal to the change in its kinetic energy.
In part (b), we found that the kinetic energy of the bullet is 453.375 J. The work done on the bullet is equal to the change in its kinetic energy:
Work = ΔKE
The work done can be calculated using the formula for work: Work = Force × Distance. In this case, the distance is given as 0.72 m (the length of the barrel), and the force is the average net force we want to find.
Therefore, we have:
Force × Distance = ΔKE
Force = ΔKE / Distance
Substituting the values, we get:
Force = 453.375 J / 0.72 m
Force ≈ 629.375 N
However, it's important to note that the force calculated above is the average force exerted on the bullet during its acceleration in the barrel. The force might vary during the process due to factors such as friction and pressure variations.
The magnitude of the average net force that acted on the bullet while it was in the barrel is approximately 3637 N. This value is obtained by dividing the change in kinetic energy of the bullet by the distance it traveled inside the barrel. It's important to consider that this value represents the average force exerted on the bullet during its acceleration and that the force may not be constant throughout the process.
The work-kinetic energy theorem provides a useful framework for analyzing the relationship between work, energy, and forces acting on objects during motion. By comparing the predictions of the work-kinetic energy theorem with Newton's laws, we can gain a deeper understanding of the factors influencing the motion of objects and the transfer of energy.
To know more about force ,visit:
https://brainly.com/question/12785175
#SPJ11
The centripetal acceleration of a car moving around a circular curve at a constant speed of 22 m/s has a magnitude of 7.8 m/s ^2
. Calculate the radius of the curve.
The radius of the curve is [tex]\(62.05 \, \text{m}\)[/tex]
The centripetal acceleration of an object moving in a circular path is given by the formula:
[tex]\[a_c = \frac{{v^2}}{{r}}\][/tex]
where [tex]\(a_c\)[/tex] is the centripetal acceleration, [tex]\(v\)[/tex] is the speed of the object, and [tex]\(r\)[/tex] is the radius of the circular path.
Given that [tex]\(v = 22 \, \text{m/s}\) and \(a_c = 7.8 \, \text{m/s}^2\)[/tex], we can rearrange the formula to solve for [tex]\(r\)[/tex]:
[tex]\[r = \frac{{v^2}}{{a_c}}\][/tex]
Substituting the given values:
[tex]\[r = \frac{{(22 \, \text{m/s})^2}}{{7.8 \, \text{m/s}^2}}\][/tex]
Calculating the result:
[tex]\[r = \frac{{484 \, \text{m}^2/\text{s}^2}}{{7.8 \, \text{m/s}^2}} \\\\= 62.05 \, \text{m}\][/tex]
Therefore, the radius of the curve is [tex]\(62.05 \, \text{m}\)[/tex].
Know more about radius:
https://brainly.com/question/24051825
#SPJ4
The radius of the curve is 61.56 m.
The centripetal acceleration of a car moving around a circular curve at a constant speed of 22 m/s has a magnitude of 7.8 m/s². We are to calculate the radius of the curve. To find the radius of the curve, we use the formula for centripetal acceleration as shown below:a_c = v²/r
where a_c is the centripetal acceleration, v is the velocity of the object moving in the circular motion and r is the radius of the curve. Rearranging the formula above to make r the subject, we have:r = v²/a_c
Now, substituting the given values into the formula above, we have:r = 22²/7.8r = 61.56 m.
Learn more about centripetal acceleration
https://brainly.com/question/17123770
#SPJ11
In an oscillating IC circuit with capacitance C, the maximum potential difference across the capacitor during the oscillations is V and the
maximum current through the inductor is I.
NOTE: Give your answer in terms of the variables given.
(a) What is the inductance L?
[:
(b) What is the frequency of the oscillations?
f (c) How much time is required for the charge on the capacitor to rise
from zero to its maximum value?
The inductance (L) is obtained by dividing V by I multiplied by 2πf, while f is determined by 1/(2π√(LC)).
In an oscillating circuit, the inductance L can be calculated using the formula L = V / (I * 2πf). The inductance is directly proportional to the maximum potential difference across the capacitor (V) and inversely proportional to both the maximum current through the inductor (I) and the frequency of the oscillations (f). By rearranging the formula, we can solve for L.
The frequency of the oscillations can be determined using the formula f = 1 / (2π√(LC)). This formula relates the frequency (f) to the inductance (L) and capacitance (C) in the circuit. The frequency is inversely proportional to the product of the square root of the product of the inductance and capacitance.
To summarize, to find the inductance (L) in an oscillating circuit, we can use the formula L = V / (I * 2πf), where V is the maximum potential difference across the capacitor, I is the maximum current through the inductor, and f is the frequency of the oscillations. The frequency (f) can be determined using the formula f = 1 / (2π√(LC)), where L is the inductance and C is the capacitance.
To learn more about inductance click here:
brainly.com/question/31127300
#SPJ11
An electron that has a velocity with x component 2.4 x 100 m/s and y component 3.1 x 100 m/s moves through a uniform magnetic field with x component 0.034 T and y component -0.22 T. (a) Find the magnitude of the magnetic force on the electron. (b) Repeat your calculation for a proton having the same velocity. (a) Number PO Units (b) Number i Units
a) Calculation of magnetic force on the electron:
The magnetic force on a moving charged particle can be calculated using the formula F = qvB sin θ, where F is the magnetic force, q is the charge of the particle, v is the velocity of the particle, B is the magnetic field, and θ is the angle between the velocity and the magnetic field.
Given data:
vx (x-component of velocity of the electron) = 2.4 × 100 m/s
vy (y-component of velocity of the electron) = 3.1 × 100 m/s
Bx (x-component of magnetic field) = 0.034 T
By (y-component of magnetic field) = -0.22 T
q (charge of an electron) = -1.6 × 10^-19 C
θ = 90°
Since sin 90° = 1, we can substitute the values into the formula:
F = qvB sin θ = (-1.6 × 10^-19 C)(2.4 × 100 m/s)(0.034 T)(1) = -1.386 × 10^-19 N
Therefore, the magnitude of the magnetic force on the electron is 1.386 × 10^-19 N.
b) Calculation of magnetic force on the proton:
Given data:
vx (x-component of velocity of the proton) = 2.4 × 100 m/s
vy (y-component of velocity of the proton) = 3.1 × 100 m/s
Bx (x-component of magnetic field) = 0.034 T
By (y-component of magnetic field) = -0.22 T
q (charge of a proton) = +1.6 × 10^-19 C
θ = 90°
Since sin 90° = 1, we can substitute the values into the formula:
F = qvB sin θ = (1.6 × 10^-19 C)(2.4 × 100 m/s)(0.034 T)(1) = 1.386 × 10^-19 N
Therefore, the magnitude of the magnetic force on the proton is 1.386 × 10^-19 N.
To learn more about magnetic forces and their calculations, you can visit the following link:
brainly.com/question/15396385
#SPJ11
If calcium has a 0.647 in specific heat and has been added 5.0 more does that mean it has a high temperature in specific heat?
Calcium has a specific heat capacity of 0.647. This means that it requires 0.647 Joules of energy to raise the temperature of 1 gram of calcium by 1 degree Celsius.
If calcium has a 0.647 in specific heat and has been added 5.0 more does that mean it has a high temperature in specific heat? Adding 5.0 more of calcium does not necessarily mean that it has a high temperature in specific heat. The specific heat capacity of a substance is a measure of how much heat it can absorb or release without changing its temperature significantly. It is not directly related to the temperature of the substance. To determine the temperature change, you would need to know the amount of heat energy transferred to or from the calcium, as well as its mass. Based on the information provided, it is not possible to determine the temperature of the calcium. Calcium has a specific heat capacity of 0.647. This means that it requires 0.647 Joules of energy to raise the temperature of 1 gram of calcium by 1 degree Celsius.
The specific heat capacity of calcium is 0.647, but without more information, we cannot determine its temperature.
To know more about Calcium visit:
brainly.com/question/31566398
#SPJ11
A man-made satellite of mass 6000 kg is in orbit around the earth, making one revolution in 450 minutes. Assume it has a circular orbit and it is interacting with earth only.
a.) What is the magnitude of the gravitational force exerted on the satellite by earth?
b.) If another satellite is at a circular orbit with 2 times the radius of revolution of the first one, what will be its speed?
c.) If a rocket of negligible mass is attached to the first satellite and the rockets fires off for some time to increase the radius of the first satellite to twice its original mass, with the orbit again circular.
i.) What is the change in its kinetic energy?
ii.) What is the change in its potential energy?
iii.) How much work is done by the rocket engine in changing the orbital radius?
Mass of Earth is 5.97 * 10^24 kg
The radius of Earth is 6.38 * 10^6 m,
G = 6.67 * 10^-11 N*m^2/kg^2
a) The magnitude of the gravitational force exerted on the satellite by Earth is approximately 3.54 * 10^7 N.
b) The speed of the second satellite in its circular orbit is approximately 7.53 * 10^3 m/s.
c) i) There is no change in kinetic energy (∆KE = 0).
ii) The change in potential energy is approximately -8.35 * 10^11 J.
iii) The work done by the rocket engine is approximately -8.35 * 10^11 J.
a) To calculate the magnitude of the gravitational force exerted on the satellite by Earth, we can use the formula:
F = (G × m1 × m2) / r²
where F is the gravitational force, G is the gravitational constant, m1 is the mass of the satellite, m2 is the mass of Earth, and r is the radius of the orbit.
Given:
Mass of the satellite (m1) = 6000 kg
Mass of Earth (m2) = 5.97 × 10²⁴ kg
Radius of the orbit (r) = radius of Earth = 6.38 × 10⁶ m
Gravitational constant (G) = 6.67 × 10⁻¹¹ N×m²/kg²
Plugging in the values:
F = (6.67 × 10⁻¹¹ N×m²/kg² × 6000 kg × 5.97 × 10²⁴ kg) / (6.38 × 10⁶ m)²
F ≈ 3.54 × 10⁷ N
Therefore, the magnitude of the gravitational force exerted on the satellite by Earth is approximately 3.54 * 10^7 N.
b) The speed of a satellite in circular orbit can be calculated using the formula:
v = √(G × m2 / r)
Given that the radius of the second satellite's orbit is 2 times the radius of the first satellite's orbit:
New radius of orbit (r') = 2 × 6.38 * 10⁶ m = 1.276 × 10⁷ m
Plugging in the values:
v' = √(6.67 × 10⁻¹¹ N×m²/kg^2 × 5.97 × 10²⁴ kg / 1.276 × 10⁷ m)
v' ≈ 7.53 × 10³ m/s
Therefore, the speed of the second satellite in its circular orbit is approximately 7.53 * 10^3 m/s.
c) i) The change in kinetic energy can be calculated using the formula:
∆KE = (1/2) × m1 × (∆v)²
Since the satellite is initially in a circular orbit and its speed remains constant throughout, there is no change in kinetic energy (∆KE = 0).
ii) The change in potential energy can be calculated using the formula:
∆PE = - (G × m1 × m2) × ((1/r') - (1/r))
∆PE = - (6.67 × 10⁻¹¹ N*m²/kg² × 6000 kg × 5.97 × 10²⁴ kg) × ((1/1.276 × 10⁷ m) - (1/6.38 × 10⁶ m))
∆PE ≈ -8.35 × 10¹¹ J
The change in potential energy (∆PE) is approximately -8.35 × 10¹¹ J.
iii) The work done by the rocket engine in changing the orbital radius is equal to the change in potential energy (∆PE) since no other external forces are involved. Therefore:
Work done = ∆PE ≈ - 8.35 × 10¹¹ J
The work done by the rocket engine is approximately -8.35 × 10¹¹ J. (Note that the negative sign indicates work is done against the gravitational force.)
Read more on gravitational force here: https://brainly.com/question/940770
#SPJ11
1. An oil drop is balanced in a Millikan apparatus. The drop has a mass of 1.8 10-18 kg. The plates have a potential difference of 920 V, are separated by 3.6 cm, and the lower plate is positive. Calculate the number of excess or deficit electrons on the oil drop, and state whether it is an excess or deficit. [5 marks)
The Millikan experiment was carried out to determine the value of the electric charge carried by an electron.'
The method was to suspend oil droplets in a uniform electric field between two metal plates by adjusting the voltage applied to the plates such that the force on the droplet was balanced by the force of gravity. The excess or deficit charge on the droplet could then be calculated and from this,
The charge carried by an electron could be determined.What is an oil drop?An oil drop is a charged droplet of oil that is formed in a high voltage field. An oil droplet carries an electric charge because when it comes into contact with an ion.
To know more about Millikan visit:
https://brainly.com/question/32827743
#SPJ11
When launching a satellite into space, the energy required is using an assumption for constant gravity vs. the universal law of gravity a) underestimated b) exactly the same c) overestimated The gravitational potential energy of a two-object system a) Increases as the objects move closer together b) Does not depend on the distance between objects c) Decreases in magnitude if the objects become more massive d) Can be positive or negative e) None of the above
The energy required to launch a satellite into space using an assumption for constant gravity is underestimated.
The assumption of constant gravity, where gravity is considered to be uniform throughout the entire process of launching the satellite, leads to an underestimation of the energy required. In reality, as the satellite moves away from the Earth's surface, the gravitational force decreases, requiring additional energy to overcome the gravitational potential energy and reach the desired orbital position. Neglecting this variation in gravity would result in an underestimation of the energy needed for the satellite launch.
The gravitational potential energy of a two-object system is a) increases as the objects move closer together.
The gravitational potential energy between two objects is directly related to the distance between them. As the objects move closer together, the distance decreases, resulting in an increase in the gravitational potential energy. This can be understood from the formula for gravitational potential energy: PE = -G * (m1 * m2) / r, where G is the gravitational constant, m1 and m2 are the masses of the objects, and r is the distance between them. As the distance (r) decreases, the potential energy (PE) increases.
Therefore, the gravitational potential energy of a two-object system increases as the objects move closer together.
Learn more about gravity from the given link
https://brainly.com/question/31321801
#SPJ11
can
i please get the answer to this
Question 6 (1 point) + Doppler shift Destructive interference Standing waves Constructive interference Resonance O Resonant Frequency
Resonance is a phenomenon that occurs when the frequency of a vibration of an external force matches an object's natural frequency of vibration, resulting in a dramatic increase in amplitude.
When the frequency of the external force equals the natural frequency of the object, resonance is said to occur. This results in an enormous increase in the amplitude of the object's vibration.
In other words, resonance is the tendency of a system to oscillate at greater amplitude at certain frequencies than at others. Resonance occurs when the frequency of an external force coincides with one of the system's natural frequencies.
A standing wave is a type of wave that appears to be stationary in space. Standing waves are produced when two waves with the same amplitude and frequency travelling in opposite directions interfere with one another. As a result, the wave appears to be stationary. Standing waves are found in a variety of systems, including water waves, electromagnetic waves, and sound waves.
The Doppler effect is the apparent shift in frequency or wavelength of a wave that occurs when an observer or source of the wave is moving relative to the wave source. The Doppler effect is observed in a variety of wave types, including light, water, and sound waves.
Constructive interference occurs when two waves with the same frequency and amplitude meet and merge to create a wave of greater amplitude. When two waves combine constructively, the amplitude of the resultant wave is equal to the sum of the two individual waves. When the peaks of two waves meet, constructive interference occurs.
Destructive interference occurs when two waves with the same frequency and amplitude meet and merge to create a wave of lesser amplitude. When two waves combine destructively, the amplitude of the resultant wave is equal to the difference between the amplitudes of the two individual waves. When the peak of one wave coincides with the trough of another wave, destructive interference occurs.
The resonant frequency is the frequency at which a system oscillates with the greatest amplitude when stimulated by an external force with the same frequency as the system's natural frequency. The resonant frequency of a system is determined by its mass and stiffness properties, as well as its damping characteristics.
To know more about Resonance, refer
https://brainly.com/question/29298725
#SPJ11
Part A Calculate the displacement current Ip between the square platos, 6.8 cm on a side of a capacitor if the electric field is changing at a rate of 2.1 x 10% V/m. Express your answer to two significant figures and include the appropriate units. lo =
the displacement current between the square plates of the capacitor is 9694 A. To calculate displacement current, we convert the units appropriately and perform the multiplication.
In this case, the square plates have a side length of 6.8 cm, which gives us an area of (6.8 cm)^2. The electric field is changing at a rate of 2.1 x 10^6 V/m.
The displacement current (Ip) between the square plates of a capacitor can be calculated by multiplying the rate of change of electric field (dE/dt) by the area (A) of the plates.
The area of the square plates is (6.8 cm)^2 = 46.24 cm^2. Converting this to square meters, we have A = 46.24 cm^2 = 0.004624 m^2.
Now, we can calculate the displacement current (Ip) by multiplying the rate of change of electric field (dE/dt) by the area (A):
Ip = (dE/dt) * A = (2.1 x 10^6 V/m) * (0.004624 m^2) = 9694 A
Therefore, the displacement current between the square plates of the capacitor is 9694 A.
Learn more about capacitor here: brainly.com/question/31627158
#SPJ11
(5 points) In a harmonic oscillator, the spacing energy AE between the quantized energy levels is 4 eV. What is the energy of the ground state? O a 4eV Oblev O c. 2 eV O d. 0 eV
the energy of the ground state in a harmonic oscillator with a spacing energy of 4 eV is approximately 12.03 eV. None of the provided answer options (a, b, c, d) matches this result.
In a harmonic oscillator, the spacing energy between quantized energy levels is given by the formula:
ΔE = ħω,
where ΔE is the spacing energy, ħ is the reduced Planck's constant (approximately 6.626 × 10^(-34) J·s), and ω is the angular frequency of the oscillator.
ΔE = 4 eV × 1.602 × 10^(-19) J/eV = 6.408 × 10^(-19) J.
6.408 × 10^(-19) J = ħω.
E₁ = (n + 1/2) ħω,
where E₁ is the energy of the ground state.
E₁ = (1 + 1/2) ħω = (3/2) ħω.
E₁ = (3/2) × 6.408 × 10^(-19) J.
E₁ = (3/2) × 6.408 × 10^(-19) J / (1.602 × 10^(-19) J/eV) = 3 × 6.408 / 1.602 eV.
E₁ ≈ 12.03 eV.
Therefore, the energy of the ground state in a harmonic oscillator with a spacing energy of 4 eV is approximately 12.03 eV. None of the provided answer options (a, b, c, d) matches this result.
Learn more about oscillator here : brainly.com/question/15780863
#SPJ11
13. A particle vibrates 5 times a second and each time it
vibrates, the energy advances by 50 cm. What is the wave speed? A.
5 m/s B. 2.5 m/s C. 1.25 m/s D. 0.5 m/s
14. Which of the following apply to
A particle that vibrates 5 times a second and advances energy 50 cm per vibration will create a wave with a wavelength of 10 cm and the wave speed is 0.5 m/s
Therefore, the speed of the wave can be calculated using the following formula:
Wave speed = frequency x wavelength
Substituting in the values gives:
Wave speed = 5 x 10 cm/s = 50 cm/s = 0.5 m/s. Therefore, the answer is option D (0.5 m/s).
When a particle vibrates, it produces a wave, which is defined as a disturbance that travels through space and time. The wave has a certain speed, frequency, and wavelength. The wave speed refers to the distance covered by the wave per unit time. It is determined by multiplying the frequency by the wavelength.
In this problem, a particle vibrates five times a second, and each time it vibrates, the energy advances by 50 cm. The question is to determine the wave speed of the particle's vibration. To determine the wave speed, we need to use the following formula:
Wave speed = frequency x wavelengthThe frequency of the particle's vibration is 5 Hz, and the distance advanced by the energy per vibration is 50 cm. Therefore, the wavelength can be calculated as follows:
Wavelength = distance/number of vibrations = 50 cm/5 = 10 cm.
Substituting these values into the formula for wave speed, we get:
Wave speed = 5 x 10 cm/s = 50 cm/s = 0.5 m/sTherefore, the wave speed of the particle's vibration is 0.5 m/s.
A particle that vibrates five times a second and advances energy 50 cm per vibration will create a wave with a wavelength of 10 cm. The wave speed can be calculated using the formula wave speed = frequency x wavelength, which gives a value of 0.5 m/s.
To know more about frequency visit
brainly.com/question/29739263
#SPJ11
A beam of light strikes the surface of glass (n = 1.46) at an angle of 60° with respect to the normal. Find the angle of refraction inside the glass. Take the index of refraction of air n₁ = 1.
The angle of refraction is 53.13°.
Here are the given:
* Angle of incidence: 60°
* Index of refraction of air: n₁ = 1
* Index of refraction of glass: n₂ = 1.46
To find the angle of refraction, we can use the following formula:
sin(θ₂) = n₁ sin(θ₁)
where:
* θ₂ is the angle of refraction
* θ₁ is the angle of incidence
* n₁ is the index of refraction of the first medium (air)
* n₂ is the index of refraction of the second medium (glass)
Plugging in the known values, we get:
sin(θ₂) = 1 * sin(60°) = 0.866
θ₂ = sin⁻¹(0.866) = 53.13°
Therefore, the angle of refraction is 53.13°.
Learn more about refraction with the given link,
https://brainly.com/question/27932095
#SPJ11
Which of the following statements correctly describes the relationship between an object's gravitational potential energy and its height above the ground?
proportional to the square of the object's height above the ground
directly proportional to the object's height above the ground
inversely proportional to the object's height above the ground
proportional to the square root of the object's height above the ground
An archer is able to shoot an arrow with a mass of 0.050 kg at a speed of 120 km/h. If a baseball of mass 0.15 kg is given the same kinetic energy, determine its speed.
A 50 kg student bounces up from a trampoline with a speed of 3.4 m/s. Determine the work done on the student by the force of gravity when she is 5.3 m above the trampoline.
The correct statement describing the relationship between an object's gravitational potential energy and its height above the ground is that it is directly proportional to the object's height above the ground.
Gravitational potential energy is the energy an object possesses due to its position in a gravitational field. As an object is raised higher above the ground, its potential energy increases. This relationship is linear and follows the principle of work done against gravity. When an object is lifted vertically, the work done is equal to the force of gravity multiplied by the vertical displacement. Since the force of gravity is constant near the Earth's surface, the potential energy is directly proportional to the height.
The kinetic energy (KE) of an object is given by the equation:
KE = (1/2) × mass × velocity^2
Let's denote the velocity of the baseball as v. We know the mass of the baseball is 0.15 kg, and the kinetic energy of the arrow is equal to the kinetic energy of the baseball. Therefore, we can write:
(1/2) × 0.050 kg × (120 km/h)^2 = (1/2) × 0.15 kg × v^2
First, we need to convert the velocity of the arrow from km/h to m/s by dividing it by 3.6:
(1/2) × 0.050 kg × (120,000/3.6 m/s)^2 = (1/2) × 0.15 kg × v^2
Simplifying the equation gives:
0.050 kg × (120,000/3.6 m/s)^2 = 0.15 kg × v^2
Solving for v, we can find the speed of the baseball.
To determine the work done on the student by the force of gravity, we can use the formula:
Work = Force * displacement * cos(theta)
In this case, the force of gravity is equal to the weight of the student, which can be calculated as mass_student * acceleration due to gravity. Given that the student's mass is 50 kg and the displacement is 5.3 m, we can substitute these values into the equation:
Work = (50 kg) * (9.8 m/s^2) * (5.3 m) * cos(180 degrees)
Since cos(180 degrees) = -1, the negative sign indicates that the force of gravity acts in the opposite direction of displacement.
Now, we can perform the calculation:
Work = (50 kg) * (9.8 m/s^2) * (5.3 m) * (-1)
The result will give us the work done on the student by the force of gravity when she is 5.3 m above the trampoline.
To learn more about gravitational potential, click here:https://brainly.com/question/29020626
#SPJ11
Write the complete decay equation for the given nuclide in the complete 4xy notation. Refer to the periodic table for values of Z. A decay of 210 Po, the isotope of polonium in the decay series of 238U that was discovered by the Curies.
The complete decay equation for the given nuclide, 210Po, in the complete 4xy notation is:
210Po → 206Pb + 4He
Polonium-210 (210Po) is an isotope of polonium that undergoes alpha decay as part of the decay series of uranium-238 (238U). In alpha decay, an alpha particle (consisting of two protons and two neutrons) is emitted from the nucleus of the parent atom.
In the case of 210Po, the parent atom decays into a daughter atom by emitting an alpha particle. The daughter atom formed in this process is lead-206 (206Pb), and the emitted alpha particle is represented as helium-4 (4He).
The complete 4xy notation is used to represent the nuclear reactions, where x and y represent the atomic numbers of the daughter atom and the emitted particle, respectively. In this case, the complete decay equation can be written as:
210Po → 206Pb + 4He
This equation shows that 210Po decays into 206Pb by emitting a 4He particle. It is important to note that the sum of the atomic numbers and the sum of the mass numbers remain conserved in a nuclear decay reaction.
Learn more about decay
brainly.com/question/32239385
#SPJ11
A body oscillates with simple harmonic motion along the x axis. Its displacement in m varies with time according to the equation x = 5.0 cos (3t). The magnitude of the velocity (in m/s) of the body at t = 0 sis Show your works. a. 3.5 b. 59 14 d. 45 e. 0
The magnitude of the velocity of the body at t = 0 is e. 0 m/s.
The velocity (v) of the body in simple harmonic motion is obtained by taking the derivative of the displacement equation x = 5.0 cos (3t) with respect to time. Differentiating, we find that v = -15.0 sin (3t).
v = dx/dt = -15.0 sin (3t)
Evaluating the velocity at t = 0:
v(0) = -15.0 sin (3 * 0)
= -15.0 sin (0)
= 0
Therefore, the magnitude of the velocity of the body at t = 0 is 0 m/s, signifying a momentary pause in motion during the oscillation.
To learn more about velocity, click here: https://brainly.com/question/30559316
#SPJ11
1. (5 pts.) A 25 g cylinder of metal at a temperature of 120°C is dropped into 200 g of water at 10°C. The container is a perfect insulator, so no energy is lost to the environment. The specific heat of the cylinder is 280 J/kg/K. a. What is the equilibrium temperature of the system? b. What is the change in entropy of the system?
a. The equilibrium temperature of the system is approximately 34.8°C.
b. The change in entropy of the system is positive.
a. To find the equilibrium temperature of the system, we can use the principle of energy conservation. The heat lost by the metal cylinder is equal to the heat gained by the water. The heat transfer can be calculated using the equation:
Q = m1 * c1 * (T f - Ti)
where Q is the heat transferred, m1 is the mass of the metal cylinder, c1 is the specific heat of the cylinder, T f is the final temperature (equilibrium temperature), and Ti is the initial temperature.
The heat gained by the water can be calculated using the equation:
Q = m2 * c2 * (T f - Ti)
where m2 is the mass of the water, c2 is the specific heat of water, T f is the final temperature (equilibrium temperature), and Ti is the initial temperature.
Setting these two equations equal to each other and solving for T f:
m1 * c1 * (T f - Ti1) = m2 * c2 * (T f - Ti2)
(25 g) * (280 J/kg/K) * (T f - 120°C) = (200 g) * (4.18 J/g/K) * (T f - 10°C)
Simplifying the equation:
(7 T f - 8400) = (836 T f - 8360)
Solving for T f:
836 T f - 7 T f = 8360 - 8400
829 T f = -40
T f ≈ -0.048°C ≈ 34.8°C
Therefore, the equilibrium temperature of the system is approximately 34.8°C.
b. The change in entropy of the system can be calculated using the equation:
ΔS = Q / T
where ΔS is the change in entropy, Q is the heat transferred, and T is the temperature.
Since the container is a perfect insulator and no energy is lost to the environment, the total heat transferred in the system is zero. Therefore, the change in entropy of the system is also zero.
a. The equilibrium temperature of the system is approximately 34.8°C.
b. The change in entropy of the system is zero.
To know more about entropy ,visit:
https://brainly.com/question/419265
#SPJ11
Calculate the force between 2 charges which each have a charge of +2.504C and
are separated by 1.25cm.
The force between the two charges of +2.504 C, separated by 1.25 cm, is approximately [tex]3.0064 \times 10^{14}[/tex] Newtons.
To calculate the force between two charges, we can use Coulomb's law, which states that the force (F) between two charges (q1 and q2) is directly proportional to the product of the charges and inversely proportional to the square of the distance between them. The formula for Coulomb's law is:
[tex]F = \frac {(k \times q_1 \times q_2)}{r^2}[/tex] where F is the force, k is the electrostatic constant (approximately [tex]9 \times 10^9 N \cdot m^2/C^2[/tex]), q₁ and q₂ are the charges, and r is the distance between the charges.
In this case, both charges have a value of +2.504 C, and they are separated by a distance of 1.25 cm (which is equivalent to 0.0125 m). Substituting these values into the formula, we have:
[tex]F = \frac{(9 \times 10^9 N \cdot m^2/C^2 \times 2.504 C \times 2.504 C)}{(0.0125 m)^2}[/tex]
Simplifying the calculation, we find: [tex]F \approx 3.0064 \times 10^{14}[/tex] Newtons.
So, to calculate the force between two charges, we can use Coulomb's law. By substituting the values of the charges and the distance into the formula, we can determine the force. In this case, the force between the two charges of +2.504 C, separated by 1.25 cm, is approximately [tex]3.0064 \times 10^{14}[/tex] Newtons.
Learn more about Coulomb force here:
https://brainly.com/question/31828017
#SPJ11
If 2 grams of matter could be entirely converted to energy, how
much would the energy produce cost at 25 centavos per kWh?
if 2 grams of matter could be entirely converted to energy, it would produce energy with a cost of 12.5 million pesos at 25 centavos per kWh.
How do we calculate?we will make use of the energy equation developed by Albert Einstein:
E = mc²
E= energy,
m = mass,
c = speed of light =[tex]3.0 * 10^8[/tex] m/s
E = (0.002 kg) * ([tex]3.0 * 10^8[/tex]m/s)²
E =[tex]1.8 * 10^1^4[/tex] joules
1 kWh = [tex]3.6 * 10^6[/tex] joules
Energy in kWh = ([tex]1.8 * 10^1^4[/tex] joules) / ([tex]3.6 * 10^6[/tex] joules/kWh)
Energy in kWh =[tex]5.0 * 10^7[/tex] kWh
The Cost is then found as = ([tex]5.0 * 10^7[/tex] kWh) * (0.25 pesos/kWh)
Cost = [tex]1.25 * 10^7[/tex]pesos
Learn more about Energy at:
https://brainly.com/question/13881533
#SPJ4
Coherent light with single wavelength falls on two slits separated by 0.610 mm. In the resulting interference pattern on the screen 1.70 m away, adjacent bright fringes are separated by 2.10 mm. What is the wavelength (in nanometers) of the light that falls on the slits? Use formula for the small angles of diffraction (10 pts.)
The wavelength of the light falling on the slits is approximately 493 nanometers when adjacent bright fringes are separated by 2.10 mm.
To find the wavelength of the light falling on the slits, we can use the formula for the interference pattern in a double-slit experiment:
λ = (d * D) / y
where λ is the wavelength of the light, d is the separation between the slits, D is the distance between the slits and the screen, and y is the separation between adjacent bright fringes on the screen.
Given:
Separation between the slits (d) = 0.610 mm = 0.610 × 10^(-3) m
Distance between the slits and the screen (D) = 1.70 m
Separation between adjacent bright fringes (y) = 2.10 mm = 2.10 × 10^(-3) m
Substituting these values into the formula, we can solve for the wavelength (λ):
λ = (0.610 × 10^(-3) * 1.70) / (2.10 × 10^(-3))
λ = (1.037 × 10^(-3)) / (2.10 × 10^(-3))
λ = 0.4933 m
To convert the wavelength to nanometers, we multiply by 10^9:
λ = 0.4933 × 10^9 nm
λ ≈ 493 nm
Therefore, the wavelength of the light falling on the slits is approximately 493 nanometers.
To know more about bright fringes please refer:
https://brainly.com/question/29487127
#SPJ11
1) An airplane (m=1500 kg) is traveling at 225 m/s when it strikes a weather balloon (m 34.1 kg at rest. After the collision, the balloon is caught on the fuselage and is traveling with the airplane. What is the velocity of the plane + balloon after the collision (10 points)? The collision takes place over a time interval of 4.44x10 s. What is the average force that the balloon exerts on the airplane (5 points)?
the average force exerted by the balloon on the airplane is F = 0 / (4.44 × 10⁻³) = 0 N.
Let the velocity of the airplane be V0 and the velocity of the balloon after the collision be v
After the collision, the momentum of the airplane + balloon system should be conserved before and after the collision, since there are no external forces acting on the system.
That is,m1v1 + m2v2 = (m1 + m2)V [1]
where m1 = 1500 kg (mass of airplane), v1 = 225 m/s (velocity of airplane), m2 = 34.1 kg (mass of balloon), v2 = 0 (initial velocity of balloon) and V is the velocity of the airplane + balloon system after collision.
On solving the above equation, we get V = (m1v1 + m2v2) / (m1 + m2) = 225(1500) / 1534.1 = 220.6 m/s
Therefore, the velocity of the airplane + balloon after the collision is 220.6 m/s.
The average force exerted by the balloon on the airplane is given by F = ΔP / Δt
where ΔP is the change in momentum and Δt is the time interval of the collision. Here, ΔP = m2v2 (since the momentum of the airplane remains unchanged), which is 0.
The time interval is given as 4.44 × 10⁻³ s. Therefore, the average force exerted by the balloon on the airplane is F = 0 / (4.44 × 10⁻³) = 0 N.
learn more about velocity here
https://brainly.com/question/29563991
#SPJ11
a)What is the magnitude of the tangential acceleration of a bug on the rim of an 11.5-in.-diameter disk if the disk accelerates uniformly from rest to an angular speed of 79.0 rev/min in 3.80 s?
b) When the disk is at its final speed, what is the magnitude of the tangential velocity of the bug?
c) One second after the bug starts from rest, what is the magnitude of its tangential acceleration?
d) One second arter the bug starts from rest, what Is the magnitude or its centripetal acceleration?
e) One second after the bug starts from rest, what is its total acceleration? (Take the positive direction to be in the direction of motion.)
a) The magnitude of the tangential acceleration of the bug on the rim of the disk is approximately 1.209 m/s².
b) The magnitude of the tangential velocity of the bug when the disk is at its final speed is approximately 2.957 m/s.
c) One second after starting from rest, the magnitude of the tangential acceleration of the bug is approximately 1.209 m/s².
d) One second after starting from rest, the magnitude of the centripetal acceleration of the bug is approximately 1.209 m/s².
e) One second after starting from rest, the magnitude of the total acceleration of the bug is approximately 1.710 m/s².
To solve the problem, we need to convert the given quantities to SI units.
Given:
Diameter of the disk = 11.5 inches = 0.2921 meters (1 inch = 0.0254 meters)
Angular speed (ω) = 79.0 rev/min
Time (t) = 3.80 s
(a) Magnitude of tangential acceleration (at):
We can use the formula for angular acceleration:
α = (ωf - ωi) / t
where ωf is the final angular speed and ωi is the initial angular speed (which is 0 in this case).
Since we know that the disk accelerates uniformly from rest, the initial angular speed ωi is 0.
α = ωf / t = (79.0 rev/min) / (3.80 s)
To convert rev/min to rad/s, we use the conversion factor:
1 rev = 2π rad
1 min = 60 s
α = (79.0 rev/min) * (2π rad/rev) * (1 min/60 s) = 8.286 rad/s²
The tangential acceleration (at) can be calculated using the formula:
at = α * r
where r is the radius of the disk.
Radius (r) = diameter / 2 = 0.2921 m / 2 = 0.14605 m
at = (8.286 rad/s²) * (0.14605 m) = 1.209 m/s²
Therefore, the magnitude of the tangential acceleration of the bug on the rim of the disk is approximately 1.209 m/s².
(b) Magnitude of tangential velocity (v):
To calculate the tangential velocity (v) at the final speed, we use the formula:
v = ω * r
v = (79.0 rev/min) * (2π rad/rev) * (1 min/60 s) * (0.14605 m) = 2.957 m/s
Therefore, the magnitude of the tangential velocity of the bug on the rim of the disk when the disk is at its final speed is approximately 2.957 m/s.
(c) Magnitude of tangential acceleration one second after starting from rest:
Given that one second after starting from rest, the time (t) is 1 s.
Using the formula for angular acceleration:
α = (ωf - ωi) / t
where ωi is the initial angular speed (0) and ωf is the final angular speed, we can rearrange the formula to solve for ωf:
ωf = α * t
Substituting the values:
ωf = (8.286 rad/s²) * (1 s) = 8.286 rad/s
To calculate the tangential acceleration (at) one second after starting from rest, we use the formula:
at = α * r
at = (8.286 rad/s²) * (0.14605 m) = 1.209 m/s²
Therefore, the magnitude of the tangential acceleration of the bug one second after starting from rest is approximately 1.209 m/s².
(d) Magnitude of centripetal acceleration:
The centripetal acceleration (ac) can be calculated using the formula:
ac = ω² * r
where ω is the angular speed and r is the radius.
ac = (8.286 rad/s)² * (0.14605 m) = 1.209 m/s²
Therefore, the magnitude of the centripetal acceleration of the bug one second after starting from rest is approximately 1.209 m/s².
(e) Magnitude of total acceleration:
The total acceleration (a) can be calculated by taking the square root of the sum of the squares of the tangential acceleration and centripetal acceleration:
a = √(at² + ac²)
a = √((1.209 m/s²)² + (1.209 m/s²)²) = 1.710 m/s²
Therefore, the magnitude of the total acceleration of the bug one second after starting from rest is approximately 1.710 m/s².
Learn more about tangential acceleration from the link given below.
https://brainly.com/question/15743294
#SPJ4
What is the pressure inside a 310 L container holding 103.9 kg of argon gas at 21.0 ∘ C ? X Incorrect; Try Again; 4 attempts remaining
The pressure inside a 310 L container holding 103.9 kg of argon gas at 21.0 ∘C can be calculated using the Ideal Gas Law, which states that
PV = nRT,
where,
P is the pressure,
V is the volume,
n is the number of moles,
R is the universal gas constant,
T is the temperature in kelvins.
We can solve forP as follows:P = nRT/V .We need to first find the number of moles of argon gas present. This can be done using the formula:
n = m/M
where,
m is the mass of the gas
M is its molar mass.
For argon, the molar mass is 39.95 g/mol.
n = 103.9 kg / 39.95 g/mol
= 2.6 × 10³ mol
Now, we can substitute the given values into the formula to get:
P = (2.6 × 10³ mol)(0.0821 L·atm/mol·K)(294.15 K) / 310 L
≈ 60.1 atm
Therefore, the pressure inside the container is approximately 60.1 atm.
To know more about pressure , visit;
https://brainly.com/question/28012687
#SPJ11
3. Define or describe each of the following terms. Include a diagram for each. (3 marks each) I. Reflection II. Refraction III. Diffraction IV. Doppler Effect
We can describe the 1.Reflection II. Refraction III. Diffraction IV. Doppler Effect
I. Reflection:
Reflection is the process by which a wave encounters a boundary or surface and bounces back, changing its direction. It occurs when waves, such as light or sound waves, strike a surface and are redirected without being absorbed or transmitted through the material.
The angle of incidence, which is the angle between the incident wave and the normal (perpendicular) to the surface, is equal to the angle of reflection, the angle between the reflected wave and the normal.
A diagram illustrating reflection would show an incident wave approaching a surface and being reflected back in a different direction, with the angles of incidence and reflection marked.
II. Refraction:
Refraction is the bending or change in direction that occurs when a wave passes from one medium to another, such as light passing from air to water.
It happens because the wave changes speed when it enters a different medium, causing it to change direction. The amount of bending depends on the change in the wave's speed and the angle at which it enters the new medium.
A diagram illustrating refraction would show a wave entering a medium at an angle, bending as it crosses the boundary between the two media, and continuing to propagate in the new medium at a different angle.
III. Diffraction:
Diffraction is the spreading out or bending of waves around obstacles or through openings. It occurs when waves encounter an edge or aperture that is similar in size to their wavelength. As the waves encounter the obstacle or aperture, they diffract or change direction, resulting in a spreading out of the wavefronts.
This phenomenon is most noticeable with waves like light, sound, or water waves.
A diagram illustrating diffraction would show waves approaching an obstacle or passing through an opening and bending or spreading out as they encounter the obstacle or aperture.
IV. Doppler Effect:
The Doppler Effect refers to the change in frequency and perceived pitch or frequency of a wave when the source of the wave and the observer are in relative motion.
It is commonly observed with sound waves but also applies to other types of waves, such as light. When the source and observer move closer together, the perceived frequency increases (higher pitch), and when they move apart, the perceived frequency decreases (lower pitch). This effect is experienced in daily life when, for example, the pitch of a siren seems to change as an emergency vehicle approaches and then passes by.
A diagram illustrating the Doppler Effect would show a source emitting waves, an observer, and the relative motion between them, with wavefronts compressed or expanded depending on the direction of motion.
Learn more about Reflection from the given link
https://brainly.com/question/4070544
#SPJ11