The exhaust heat discharged per hour is 2.64 GW.
The heat energy converted into electrical energy, which is the efficiency of the nuclear power plant, can be expressed as follows:
efficiency= [(T1 - T2) / T1 ] × 100%
Here, T1 and T2 are the temperatures between which the plant operates.
It can be expressed mathematically as:
efficiency = [(630 - 320) / 630] × 100% = 49.21%
The efficiency of the power plant is 49.21%.
The total heat generated in the reactor is proportional to the power output.
The heat discharged per hour is directly proportional to the power output (1.3 GW).
heat = power output/efficiency
= (1.3 × 109 W)/(49.21%)
= 2.64 × 109 W
= 2.64 GW
Hence, the exhaust heat discharged per hour is 2.64 GW.
Learn more about the heat:
brainly.com/question/25603269
#SPJ11
Timer 0.346 s S a. The accuracy of the given timer b. The accuracy of ruler c. The relative error in measured acceleration due to gravity v cm d. What will happen to the value of g if the ball falls from height y= 100.0 cm Y=60.0 cm Timer 0.346 s QUESTION 5 1.4 points A Free Fall experiment was performed by a student in order to find the gravitional acceleration (9exp). The motion of a free falling object from rest is given by the following equation : 2y g= t2 Use the free fall setup diagram and the given equation to answer the following: Y=60.0 cm
The accuracy of the given timer is 0.346 s.The accuracy of the ruler is not provided in the given information. The relative error in measured acceleration due to gravity (g) in cm is not specified in the question. If the ball falls from a height of y = 100.0 cm or y = 60.0 cm, the value of g (gravitational acceleration) will remain constant.
The equation provided, 2y = [tex]gt^2[/tex], relates the distance fallen (y) to the time squared [tex](t^2)[/tex], but it does not depend on the initial height.
The gravitational acceleration, g, is constant near the surface of the Earth regardless of the starting height of the object.
To know more about acceleration refer to-
https://brainly.com/question/2303856
#SPJ11
Juan loves the movie "Titanic". So after he gets his Pfizer booster he takes a Disney Cruise to Newfoundland, Canada (where the real Titanic sank) and is on the look out for icebergs. However, due to global warming all the ice he sees are roughly 1 m cubes. If ice has a density of 917 kg/m^3 and the ocean water has a density of 1,025 kg/m^3, how high will the 1 m^3 "icebergs" above the water so that Juan can see them?
Group of answer choices
A. 0.4 m
B. 1.0 m
C. 0.6 m
D. 0.1 m
The fraction of the ice above the water level is 0.6 meters (option c).
The ice floats on water because its density is less than that of water. The volume of ice seen above the surface is dependent on its density, which is less than water density. The volume of the ice is dependent on the water that it displaces. An ice cube measuring 1 m has a volume of 1m^3.
Let V be the fraction of the volume of ice above the water, and let the volume of the ice be 1m^3. Therefore, the volume of water displaced by ice will be V x 1m^3.The mass of the ice is 917kg/m^3 * 1m^3, which is equal to 917 kg. The mass of water displaced by the ice is equal to the mass of the ice, which is 917 kg.The weight of the ice is equal to its mass multiplied by the gravitational acceleration constant (g) which is equal to 9.8 m/s^2.
Hence the weight of the ice is 917kg/m^3 * 1m^3 * 9.8m/s^2 = 8986.6N.The buoyant force of water will support the weight of the ice that is above the surface, hence it will be equal to the weight of the ice above the surface. Therefore, the buoyant force on the ice is 8986.6 N.The formula for the buoyant force is as follows:
Buoyant force = Volume of the fluid displaced by the object × Density of the fluid × Gravity.
Buoyant force = V*1m^3*1025 kg/m^3*9.8m/s^2 = 10002.5*V N.
As stated earlier, the buoyant force is equal to the weight of the ice that is above the surface. Hence, 10002.5*V N = 8986.6
N.V = 8986.6/10002.5V = 0.8985 meters.
To find the fraction of the volume of ice above the water, we must subtract the 0.4 m of ice above the water from the total volume of the ice above and below the water.V = 1 - (0.4/1)V = 0.6 meters.
To know more about fraction:
https://brainly.com/question/10354322
#SPJ11
A certain boat traveling on a river displaces a volume of 6.7 m of water. The density of the water is 1000 kg/m2.) a. What is the mass of the water displaced by the boat? b. What is the weight of the boat?
According to the question (a). The mass of the water displaced by the boat is 6700 kg. (b). The weight of the boat is 65560 N.
a. To calculate the mass of the water displaced by the boat, we can use the formula:
[tex]\[ \text{mass} = \text{volume} \times \text{density} \][/tex]
Given that the volume of water displaced is 6.7 m³ and the density of water is 1000 kg/m³, we can substitute these values into the formula:
[tex]\[ \text{mass} = 6.7 \, \text{m³} \times 1000 \, \text{kg/m³} \][/tex]
[tex]\[ \text{mass} = 6700 \, \text{kg} \][/tex]
Therefore, the mass of the water displaced by the boat is 6700 kg.
b. To calculate the weight of the boat, we need to know the gravitational acceleration in the specific location. Assuming the standard gravitational acceleration of approximately 9.8 m/s²:
[tex]\[ \text{weight} = \text{mass} \times \text{acceleration due to gravity} \][/tex]
Given that the mass of the water displaced by the boat is 6700 kg, we can substitute this value into the formula:
[tex]\[ \text{weight} = 6700 \, \text{kg} \times 9.8 \, \text{m/s}^2 \][/tex]
[tex]\[ \text{weight} = 65560 \, \text{N} \][/tex]
Therefore, the weight of the boat is 65560 N.
To know more about gravitational visit-
brainly.com/question/29013218
#SPJ11
Problem 104. Our universe is undergoing continuous uniform ex. pansion, like an expanding balloon. At its currently measured rate of expansion, it will expand by a scaling factor of k=1+.0005T in T million years. How long will it take to expand by 10% of its present size?
Given that the rate of expansion of the universe is k = 1 + 0.0005T in T million years and we want to know how long it takes for the universe to expand by 10% of its present size. We can write the equation for the rate of expansion as follows: k = 1 + 0.0005T
where T is the number of million years. We know that the expansion of the universe after T million years is given by: Expansion = k * Present size
Thus, the expansion of the universe after T million years is:
Expansion = (1 + 0.0005T) * Present size
We are given that the universe has to expand by 10% of its present size.
Therefore,
we can write: Expansion = Present size + 0.1 * Present size= 1.1 * Present size
Equating the two equations of the expansion,
we get: (1 + 0.0005T) * Present size = 1.1 * Present size
dividing both sides by Present size, we get:1 + 0.0005T = 1.1
Dividing both sides by 0.0005, we get: T = (1.1 - 1)/0.0005= 200 million years
Therefore, the universe will expand by 10% of its present size in 200 million years. Hence, the correct answer is 200.
learn more about: rate of expansion
https://brainly.com/question/33332793
#SPJ11
Explain the photoelectric effect. Again, diagrams are important
to the explanation.
A diagram illustrating the photoelectric effect would typically show light photons striking the surface of a metal, causing the ejection of electrons from the material. The diagram would also depict the energy levels of the material, illustrating how the energy of the photons must surpass the work function for electron emission to occur.
The photoelectric effect refers to the phenomenon in which electrons are emitted from a material's surface when it is exposed to light of a sufficiently high frequency or energy. The effect played a crucial role in establishing the quantum nature of light and laid the foundation for the understanding of photons as particles.
Here's a simplified explanation of the photoelectric effect:
1. When light (consisting of photons) with sufficient energy strikes the surface of a material, it interacts with the electrons within the material.
2. The energy of the photons is transferred to the electrons, enabling them to overcome the binding forces of the material's atoms.
3. If the energy transferred to an electron is greater than the material's work function (the minimum energy required to remove an electron from the material), the electron is emitted.
4. The emitted electrons, known as photoelectrons, carry the excess energy as kinetic energy.
A diagram illustrating the photoelectric effect would typically show light photons striking the surface of a metal, causing the ejection of electrons from the material. The diagram would also depict the energy levels of the material, illustrating how the energy of the photons must surpass the work function for electron emission to occur.
Learn more about photoelectric effect from the link
https://brainly.com/question/1359033
#SPJ11
An X-ray photon scatters from a free electron at rest at an angle of 165∘ relative to the incident direction. Use h=6.626⋆10−34 Js for Planck constant. Use c=3.00⋆108 m/s for the speed of light in a vacuum. Part A - If the scattered photon has a wavelength of 0.310 nm, what is the wavelength of the incident photon? Part B - Determine the energy of the incident photon in electron-volt (eV),1eV=1.6×10−19 J Part C - Determine the energy of the scattered photon. Part D - Find the kinetic energy of the recoil electron. Unit is eV. Keep 1 digit after the decimal point. Learning Goal: An X-ray photon scatters from a free electron at rest at an angle of 165∘ relative to the incident direction. Use h=6.626⋆10−34Js for Planck constant. Use c=3.00∗108 m/s for the speed of light in a vacuum.
An X-ray photon scatters from a free electron at rest at an angle of 165∘ relative to the incident direction. Use h=6.626×10⁻³⁴ J s for Planck constant. Use c=3.00×10⁸ m/s for the speed of light in a vacuum.
Part A - If the scattered photon has a wavelength of 0.310 nm, the wavelength of the incident photon is 0.310 nm.
Part B - The energy of the incident photon in electron-volt is 40.1 eV.
Part C - The energy of the scattered photon is 40.1 eV.
Part D - The kinetic energy of the recoil electron is 0 eV.
To solve this problem, we can use the principle of conservation of energy and momentum.
Part A: To find the wavelength of the incident photon, we can use the energy conservation equation:
Energy of incident photon = Energy of scattered photon
Since the energies of photons are given by the equation E = hc/λ, where h is Planck's constant, c is the speed of light, and λ is the wavelength, we can write:
hc/λ₁ = hc/λ₂
Where λ₁ is the wavelength of the incident photon and λ₂ is the wavelength of the scattered photon. We are given λ₂ = 0.310 nm. Rearranging the equation, we can solve for λ₁:
λ₁ = λ₂ * (hc/hc) = λ₂
So, the wavelength of the incident photon is also 0.310 nm.
Part B: To determine the energy of the incident photon in electron-volt (eV), we can use the energy equation E = hc/λ. Substituting the given values, we have:
E = (6.626 × 10⁻³⁴ J s * 3.00 × 10⁸ m/s) / (0.310 × 10⁻⁹ m) = 6.42 × 10⁻¹⁵ J
To convert this energy to electron-volt, we divide by the conversion factor 1.6 × 10⁻¹⁹ J/eV:
E = (6.42 × 10⁻¹⁵ J) / (1.6 × 10⁻¹⁹ J/eV) ≈ 40.1 eV
So, the energy of the incident photon is approximately 40.1 eV.
Part C: The energy of the scattered photon remains the same as the incident photon, so it is also approximately 40.1 eV.
Part D: To find the kinetic energy of the recoil electron, we need to consider the conservation of momentum. Since the electron is initially at rest, its initial momentum is zero. After scattering, the electron gains momentum in the opposite direction to conserve momentum.
Using the equation for the momentum of a photon, p = h/λ, we can calculate the momentum change of the photon:
Δp = h/λ₁ - h/λ₂
Substituting the given values, we have:
Δp = (6.626 × 10⁻³⁴ J s) / (0.310 × 10⁻⁹ m) - (6.626 × 10⁻³⁴ J s) / (0.310 × 10⁻⁹ m) = 0
Since the change in momentum of the photon is zero, the recoil electron must have an equal and opposite momentum to conserve momentum. Therefore, the kinetic energy of the recoil electron is zero eV.
To know more about photon here
https://brainly.com/question/33017722
#SPJ4
candle (h, - 0.24 m) is placed to the left of a diverging lens (f=-0.071 m). The candle is d, = 0.48 m to the left of the lens.
Write an expression for the image distance, d;
The expression for the image distance, d is;d' = 0.00093 m
Given that: Height of candle, h = 0.24 m
Distance of candle from the left of the lens, d= 0.48 m
Focal length of the diverging lens, f = -0.071 m
Image distance, d' is given by the lens formula as;1/f = 1/d - 1/d'
Taking the absolute magnitude of f, we have f = 0.071 m
Substituting the values in the above equation, we have; 1/0.071 = 1/0.48 - 1/d'14.0845
= (0.048 - d')/d'
Simplifying the equation above by cross multiplying, we have;
14.0845d' = 0.048d' - 0.048d' + 0.071 * 0.48d'
= 0.013125d'
= 0.013125/14.0845
= 0.00093 m (correct to 3 significant figures).
Therefore, the expression for the image distance, d is;d' = 0.00093 m
To learn more about image visit;
https://brainly.com/question/30725545
#SPJ11
calculate the mean free path of a photon in the core in mm,
given: The radius of the solar core is 0.1R (R is the solar radius)
The core contains 25% of the sun's total mass.
The mean free path of a photon in the core in mm can be calculated using the given information which are:Radius of solar core = 0.1R, where R is the solar radius.
The core contains 25% of the sun's total mass First, we will calculate the radius of the core:Radius of core, r = 0.1RWe know that the mass of the core, M = 0.25Ms, where Ms is the total mass of the sun.A formula that can be used to calculate the mean free path of a photon is given by:l = 1 / [σn]Where l is the mean free path, σ is the cross-sectional area for interaction and n is the number density of the target atoms/molecules.
Let's break the formula down for easier understanding:σ = πr² where r is the radius of the core n = N / V where N is the number of target atoms/molecules in the core and V is the volume of the core.l = 1 / [σn] = 1 / [πr²n]We can calculate N and V using the mass of the core, M and the mass of a single atom, m.N = M / m Molar mass of the sun.
To know more about calculated visit:
https://brainly.com/question/30781060
#SPJ11
2. Write a question, including a sketch, that calculates the amount of current in an electrical device with a voltage source of Z volts that delivers 6.3 watts of electrical power. Then answer it. ed on the falla
The amount of current in an electrical device with a voltage source of Z volts that delivers 6.3 watts of electrical power is given by I = 6.3/Z.
Explanation:
Consider an electrical device connected to a voltage source of Z volts.
The device is designed to consume 6.3 watts of electrical power.
Calculate the amount of current flowing through the device.
Sketch:
+---------[Device]---------+
| |
----|--------Z volts--------|----
To calculate the current flowing through the electrical device, we can use the formula:
Power (P) = Voltage (V) × Current (I).
Given that the power consumed by the device is 6.3 watts, we can express it as P = 6.3 W.
The voltage provided by the source is Z volts, so V = Z V.
We can rearrange the formula to solve for the current:
I = P / V
Now, substitute the given values:
I = 6.3 W / Z V
Therefore, the current flowing through the electrical device connected to a Z-volt source is 6.3 watts divided by Z volts.
To know more about electrical power, visit:
https://brainly.com/question/29869646
#SPJ11
The amount of current flowing through the electrical device is 6.3 watts divided by the voltage source in volts (Z).
To calculate the current flowing through the electrical device, we can use the formula:
Power (P) = Voltage (V) × Current (I)
Given that the power (P) is 6.3 watts, we can substitute this value into the formula. The voltage (V) is represented as Z volts.
Therefore, we have:
6.3 watts = Z volts × Current (I)
Now, let's solve for the current (I):
I = 6.3 watts / Z volts
The sketch below illustrates the circuit setup:
+---------+
| |
---| |---
| | | |
| | Device | |
| | | |
---| |---
| |
+---------+
Voltage
Source (Z volts)
So, the amount of current flowing through the electrical device is 6.3 watts divided by the voltage source in volts (Z).
To know more about voltage source, visit:
https://brainly.com/question/13577056
#SPJ11
An air bubble at the bottom of a lake 41,5 m doep has a volume of 1.00 cm the temperature at the bottom is 25 and at the top 225°C what is the radius of the bubble ist before it reaches the surface? Express your answer to two significant figures and include the appropriate units.
The radius of the bubble before it reaches the surface is approximately 5.4 × 10^(-4) m
The ideal gas law and the hydrostatic pressure equation.
Temperature at the bottom (T₁) = 25°C = 25 + 273.15 = 298.15 K
Temperature at the top (T₂) = 225°C = 225 + 273.15 = 498.15 K
Using the ideal gas law equation: PV = nRT, where P is the pressure, V is the volume, n is the number of moles, R is the gas constant, and T is the temperature in Kelvin.
(P₁ * V₁) / T₁ = (P₂ * V₂) / T₂
P₁ = pressure at the bottom of the lake
P₂ = pressure at the surface (atmospheric pressure)
V₁ = volume of the bubble at the bottom = 1.00 cm³ = 1.00 × 10^(-6) m³
V₂ = volume of the bubble at the surface (unknown)
T₁ = temperature at the bottom = 298.15 K
T₂ = temperature at the top = 498.15 K
V₂ = (P₂ * V₁ * T₂) / (P₁ * T₁)
P₁ = ρ * g * h
P₂ = atmospheric pressure
ρ = density of water = 1000 kg/m³
g = acceleration due to gravity = 9.8 m/s²
h = height = 41.5 m
P₁ = 1000 kg/m³ * 9.8 m/s² * 41.5 m
P₂ = atmospheric pressure (varies, but we can assume it to be around 1 atmosphere = 101325 Pa)
V₂ = (P₂ * V₁ * T₂) / (P₁ * T₁)
V₂ = (101325 Pa * 1.00 × 10^(-6) m³ * 498.15 K) / (1000 kg/m³ * 9.8 m/s² * 41.5 m * 298.15 K)
V₂ ≈ 1.10 × 10^(-6) m³
The volume of a spherical bubble can be calculated using the formula:
V = (4/3) * π * r³
The radius of the bubble before it reaches the surface is approximately 5.4 × 10^(-4) m
Learn more about ideal gas law here : brainly.com/question/30458409
#SPJ11
Prob. 7-6 7-7. Determine the resultant internal loadings in the beam at cross sections through points D and E. Point E is just to the right of the 15-kN load. 15 kN 25 kN/m B E 2 m 2 m 1.5 m- -1.5 m Prob. 7-7 D C
At point D, the resultant internal loadings in the beam consist of a shear force of 15 kN and a bending moment of 40 kNm in the clockwise direction. At point E, just to the right of the 15-kN load, the resultant internal loadings in the beam consist of a shear force of 40 kN and a bending moment of 80 kNm in the clockwise direction.
To determine the internal loadings in the beam at points D and E, we need to analyze the forces and moments acting on the beam.
At point D, which is located 2 m from the left end of the beam, there is a concentrated load of 15 kN acting downward. This load creates a shear force of 15 kN at point D. Additionally, there is a distributed load of 25 kN/m acting downward over a 1.5 m length of the beam from point C to D. To calculate the bending moment at D, we can use the equation:
M = -wx²/2
where w is the distributed load and x is the distance from the left end of the beam. Substituting the values, we have:
M = -(25 kN/m)(1.5 m)²/2 = -56.25 kNm
Therefore, at point D, the resultant internal loadings in the beam consist of a shear force of 15 kN (acting downward) and a bending moment of 56.25 kNm (clockwise).
Moving to point E, just to the right of the 15-kN load, we need to consider the additional effects caused by this load. The 15-kN load creates a shear force of 15 kN (acting upward) at point E, which is balanced by the 25 kN/m distributed load acting downward. As a result, the net shear force at point E is 25 kN (acting downward). The distributed load also contributes to the bending moment at point E, calculated using the same equation:
M = -wx²/2
Considering the distributed load over the 2 m length from point B to E, we have:
M = -(25 kN/m)(2 m)²/2 = -100 kNm
Adding the bending moment caused by the 15-kN load at point E (clockwise) gives us a total bending moment of -100 kNm + 15 kN x 2 m = -70 kNm (clockwise).
Therefore, at point E, the resultant internal loadings in the beam consist of a shear force of 25 kN (acting downward) and a bending moment of 70 kNm (clockwise).
To know more about beam refer here:
https://brainly.com/question/31324896#
#SPJ11
Given an object distance of 12 cm and a lens with focal length
of magnitude 4 cm, what is the image distance for a concave lens?
Give your answers in cm.
An object distance of 12 cm and a lens with focal length of magnitude 4cm, the image distance for a concave lens is 6cm.
To calculate the image distance for a concave lens, we can use the lens formula:
1/f = 1/v - 1/u
where:
f = focal length of the concave lens (given as 4 cm)
v = image distance (unknown)
u = object distance (given as 12 cm)
Let's substitute the given values into the formula and solve for v:
1/4 = 1/v - 1/12
To simplify the equation, we can find a common denominator:
12/12 = (12 - v) / 12v
Now, cross-multiply:
12v = 12(12 - v)
12v = 144 - 12v
Add 12v to both sides:
12v + 12v = 144
24v = 144
Divide both sides by 24:
v = 6cm
Therefore, the image distance for a concave lens is 6cm.
To learn more about concave lens visit: https://brainly.com/question/2289939
#SPJ11
CI Photo Credit Cameron Out A 1.9 m radius playground merry-go-round has a mass of 120 kg and is rotating with an angular velocity of 0.400 rev/s. What is its angular velocity after a 22.0 kg child gets onto it by grabbing its outer edge? a The added child is initially at rest. Treat the merry-go-round as a solid disk a mr"), and treat the child as a point mass ( - m x2).
When a 22.0 kg child gets onto the merry-go-round, grabbing its outer edge, the angular velocity of the merry-go-round will decrease. The angular momentum added by the child is L_child = (22.0 kg)(1.9 m)^2 × 0 rev/s.
After the child's addition, the angular velocity can be calculated using the principle of conservation of angular momentum. The child can be treated as a point mass, and the merry-go-round can be considered as a solid disk. The new angular velocity will depend on the initial angular momentum of the merry-go-round and the added angular momentum of the child.
The initial angular momentum of the merry-go-round can be calculated using the formula L = Iω, where L is the angular momentum, I is the moment of inertia, and ω is the angular velocity. The moment of inertia for a solid disk rotating about its central axis is given by I = (1/2)mr^2, where m is the mass of the disk and r is its radius.
Substituting the given values, we find that the initial angular momentum
L_initial = (1/2)(120 kg)(1.9 m)^2 × 0.400 rev/s.
When the child gets onto the merry-go-round, the system's total angular momentum remains conserved. The angular momentum added by the child can be calculated using the same formula, L_child = I_child ω_child. Here, the moment of inertia of a point mass is given by I_child = mx^2, where m is the mass of the child and x is the distance from the axis of rotation (the radius of the merry-go-round).
Since the child grabs the outer edge, x is equal to the radius of the merry-go-round, i.e., x = 1.9 m. Therefore, the angular momentum added by the child is L_child = (22.0 kg)(1.9 m)^2 × 0 rev/s.
Learn more about angular velocity click here: brainly.com/question/32217742
#SPJ11
A curling stone slides on ice with a speed of 2.0 m/s and collides inelastically with an identical, stationary curling stone. After the collision, the first stone is deflected by a counterclockwise angle of 28° from its original direction of travel, and the second stone moves in a direction that makes a 42° clockwise angle with the original direction of travel of the first stone. What fraction of the initial energy is lost in this collision? A) 0.12 B) 0.24 C) 0.48 D) 0.64 E) 0.36
The fraction of initial energy lost in this collision is 0. This implies that no energy is lost, indicating an elastic collision.
To determine the fraction of initial energy lost in the collision, we need to compare the initial kinetic energy with the final kinetic energy after the collision.
Given:
Initial speed of the first stone (v_1) = 2.0 m/s
Angle of deflection for the first stone (θ_1) = 28°
Angle of deflection for the second stone (θ_2) = 42°
Let's calculate the final speeds of the first and second stones using the given information:
Using trigonometry, we can find the components of the final velocities in the x and y directions for both stones.
For the first stone:
vx_1 = v_1 * cos(θ_1)
vy_1 = v_1 * sin(θ_1)
For the second stone:
vx_2 = v_2 * cos(θ_2)
vy_2 = v_2 * sin(θ_2)
Since the second stone is initially stationary, its initial velocity is zero (v_2 = 0).
Now, we can calculate the final velocities:
vx_1 = v1 * cos(θ_1)
vy_1 = v1 * sin(θ_1)
vx_2 = 0 (as v_2 = 0)
vy_2 = 0 (as v_2 = 0)
The final kinetic energy (Kf) can be calculated using the formula:
Kf = (1/2) * m * (vx1^2 + vy1^2) + (1/2) * m * (vx2^2 + vy2^2)
Since the second stone is initially stationary, its final kinetic energy is zero:
Kf = (1/2) * m * (vx_1^2 + vy_1^2)
The initial kinetic energy (Ki) can be calculated using the formula:
Ki = (1/2) * m * v_1^2
Now, we can determine the fraction of initial energy lost in the collision:
Fraction of initial energy lost = (K_i - K_f) / K_i
Substituting the expressions for K_i and K_f:
[tex]Fraction of initial energy lost = [(1/2) * m * v1^2 - (1/2) * m * (vx_1^2 + vy_1^2)] / [(1/2) * m * v_1^2]Simplifying and canceling out the mass (m):Fraction of initial energy lost = (v_1^2 - vx_1^2 - vy_1^2) / v_1^2Using the trigonometric identities sin^2(θ) + cos^2(θ) = 1, we can simplify further:[/tex]
Therefore, the fraction of initial energy lost in this collision is 0. This implies that no energy is lost, indicating an elastic collision.
Learn more about elastic collision
https://brainly.com/question/24616147
#SPJ11[tex]Fraction of initial energy lost = (v_1^2 - vx_1^2 - vy_1^2) / v_1^2Fraction of initial energy lost = (v_1^2 - v_1^2 * cos^2(θ_1) - v_1^2 * sin^2(θ_1)) / v_1^2Fraction of initial energy lost = (v_1^2 * (1 - cos^2(θ_1) - sin^2(θ_1))) / v_1^2Fraction of initial energy lost = (v_1^2 * (1 - 1)) / v1^2Fraction of initial energy lost = 0[/tex]
A 10 m wide building has a gable shaped roof that is
angled at 23.0° from the horizontal (see the linked
figure).
What is the height difference between the lowest and
highest point of the roof?
The height difference between the lowest and highest point of the roof is needed. By using the trigonometric function tangent, we can determine the height difference between the lowest and highest point of the gable-shaped roof.
To calculate the height difference between the lowest and highest point of the roof, we can use trigonometry. Here's how:
1. Identify the given information: The width of the building is 10 m, and the roof is angled at 23.0° from the horizontal.
2. Draw a diagram: Sketch a triangle representing the gable roof. Label the horizontal base as the width of the building (10 m) and the angle between the base and the roof as 23.0°.
3. Determine the height difference: The height difference corresponds to the vertical side of the triangle. We can calculate it using the trigonometric function tangent (tan).
tan(angle) = opposite/adjacent
In this case, the opposite side is the height difference (h), and the adjacent side is the width of the building (10 m).
tan(23.0°) = h/10
Rearrange the equation to solve for h:
h = 10 * tan(23.0°)
Use a calculator to find the value of tan(23.0°) and calculate the height difference.
By using the trigonometric function tangent, we can determine the height difference between the lowest and highest point of the gable-shaped roof. The calculated value will provide the desired information about the vertical span of the roof.
To know more about tangent visit:
https://brainly.com/question/1533811
#SPJ11
A photon of wavelength 1.73pm scatters at an angle of 147 ∘ from an initially stationary, unbound electron. What is the de Broglie wavelength of the electron after the photon has been scattered?
The de Broglie wavelength of the electron after the photon has been scattered is approximately -1.12 picometers (-1.12 pm).
To determine the de Broglie wavelength of the electron after the photon scattering, we can use the conservation of momentum and energy.
Given:
Wavelength of the photon before scattering (λ_initial) = 1.73 pm
Scattering angle (θ) = 147°
The de Broglie wavelength of a particle is given by the formula:
λ = h / p
where λ is the de Broglie wavelength, h is the Planck's constant, and p is the momentum of the particle.
Before scattering, both the photon and the electron have momentum. After scattering, the momentum of the electron changes due to the transfer of momentum from the photon.
We can use the conservation of momentum to relate the initial and final momenta:
p_initial_photon = p_final_photon + p_final_electron
Since the photon is initially stationary, its initial momentum (p_initial_photon) is zero. Therefore:
p_final_photon + p_final_electron = 0
p_final_electron = -p_final_photon
Now, let's calculate the final momentum of the photon:
p_final_photon = h / λ_final_photon
To find the final wavelength of the photon, we can use the scattering angle and the initial and final wavelengths:
λ_final_photon = λ_initial / (2sin(θ/2))
Substituting the given values:
λ_final_photon = 1.73 pm / (2sin(147°/2))
Using the sine function on a calculator:
sin(147°/2) ≈ 0.773
λ_final_photon = 1.73 pm / (2 * 0.773)
Calculating the value:
λ_final_photon ≈ 1.73 pm / 1.546 ≈ 1.120 pm
Now we can calculate the final momentum of the photon:
p_final_photon = h / λ_final_photon
Substituting the value of Planck's constant (h) = 6.626 x 10^-34 J·s and converting the wavelength to meters:
λ_final_photon = 1.120 pm = 1.120 x 10^-12 m
p_final_photon = (6.626 x 10^-34 J·s) / (1.120 x 10^-12 m)
Calculating the value:
p_final_photon ≈ 5.91 x 10^-22 kg·m/s
Finally, we can find the de Broglie wavelength of the electron after scattering using the relation:
λ_final_electron = h / p_final_electron
Since p_final_electron = -p_final_photon, we have:
λ_final_electron = h / (-p_final_photon)
Substituting the values:
λ_final_electron = (6.626 x 10^-34 J·s) / (-5.91 x 10^-22 kg·m/s)
Calculating the value:
λ_final_electron ≈ -1.12 x 10^-12 m
Therefore, the de Broglie wavelength of the electron after the photon has been scattered is approximately -1.12 picometers (-1.12 pm).
Learn more about de Broglie wavelength https://brainly.com/question/30404168
#SPJ11
a 190-lb man carries a 20-lb can of paint up a helical staircase that encircles a silo with radius 15 ft. if the silo is 80 ft high and the man makes exactly four complete revolutions, how much work is done by the man against gravity in climbing to the top?
The work done by the man against gravity in climbing to the top is 9,480 foot-pounds.
To calculate the work done by the man, we need to determine the total change in potential energy as he climbs up the helical staircase that encircles the silo. The potential energy can be calculated using the formula PE = mgh, where m represents the mass, g represents the acceleration due to gravity, and h represents the height.
In this case, the mass of the man is 190 lb, and the height of the silo is 80 ft. Since the man makes exactly four complete revolutions around the silo, we can calculate the circumference of the helical staircase. The circumference of a circle is given by the formula C = 2πr, where r represents the radius. In this case, the radius of the silo is 15 ft.
To find the work done against gravity, we need to multiply the change in potential energy by the number of revolutions. The change in potential energy is obtained by multiplying the mass, the acceleration due to gravity (32.2 ft/s²), and the height. The number of revolutions is four.
Therefore, the work done by the man against gravity in climbing to the top can be calculated as follows:
Work = 4 * m * g * h
= 4 * 190 lb * 32.2 ft/s² * 80 ft
= 9,480 foot-pounds.
Learn more about Work
brainly.com/question/18094932
#SPJ11
Onsider a turbojet engine mounted on a stationary test stand at sea level. The inlet and exit areas are 1. 0 atm and 800 K, respectively Calculate the static thrus O Thrust-3188 Thrust-32680N That-31680N Thrust-380N both equal to 0. 45 m². The velocity pressure, and temperature of the exhaust gas are 100 m/s
The static thrust of a turbojet engine can be calculated using the formula:
F = ma + (p2 - p1)A
where F is the static thrust, m is the mass flow rate of exhaust gases, a is the acceleration of the gases, p1 is the inlet pressure, p2 is the exit pressure, and A is the area of the exhaust nozzle.
Given that the inlet and exit areas are both 0.45 m², the area A equals 0.45 m².
The velocity of the exhaust gases is given as 100 m/s, and assuming that the exit pressure is atmospheric pressure (101,325 Pa), the velocity pressure can be calculated as:
q = 0.5 * ρ * V^2 = 0.5 * 1.18 kg/m³ * (100 m/s)^2 = 5900 Pa
The temperature of the exhaust gases is given as 800 K, and assuming that the specific heat ratio γ is 1.4, the density of the exhaust gases can be calculated as:
ρ = p/RT = (101,325 Pa)/(287 J/kgK * 800 K) = 0.456 kg/m³
Using the above values, the static thrust can be calculated as follows:
F = ma + (p2 - p1)A
m = ρAV = 0.456 kg/m³ * 0.45 m² * 100 m/s = 20.52 kg/s
a = (p2 - p1)/ρ = (101,325 Pa - 1 atm)/(0.456 kg/m³) = 8367.98 m/s^2
Therefore,
F = 20.52 kg/s * 8367.98 m/s^2 + (101,325 Pa - 1 atm)*0.45 m² = 31680 N
Hence, the static thrust of the turbojet engine is 31680 N.
learn more about velocity
brainly.com/question/24216590
#SPJ11
How long will it take for 30 grams of Rn-222 to decay to 7. 5g?
Half-Life: 3. 823 Days
The decay of radioactive atoms is an exponential process, and the amount of a radioactive substance remaining after time t can be modeled by the equation:
N(t) = N0 * e^(-λt)
where N0 is the initial amount of the substance, λ is the decay constant, and e is the base of the natural logarithm. The half-life of Rn-222 is given as 3.823 days, which means that the decay constant is:
λ = ln(2)/t_half = ln(2)/3.823 days ≈ 0.1814/day
Let N(t) be the amount of Rn-222 at time t (measured in days) after the initial measurement, and let N0 = 30 g be the initial amount. We want to find the time t such that N(t) = 7.5 g.
Substituting the given values into the equation above, we get:
N(t) = 30 * e^(-0.1814t) = 7.5
Dividing both sides by 30, we get:
e^(-0.1814t) = 0.25
Taking the natural logarithm of both sides, we get:
-0.1814t = ln(0.25) = -1.3863
Solving for t, we get:
t = 7.64 days
Therefore, it will take approximately 7.64 days for 30 grams of Rn-222 to decay to 7.5 grams.
Learn more about radioactive :
brainly.com/question/9932896
#SPJ11
Enter only the last answer c) into moodle.
A solid sphere of mass M and radius R rolls without slipping to the right with a linear speed of v
a) Find a simplified algebraic expression using symbols only for the tolal kinetic energy Kior of the ball in terms of M and R
b) IfM = 7.5 kg. R = 10,8 cm and v = 4.5 m/s find the moment of inertia of the bail.
c) Plug in the numbers from part b) into your formula from part a) to get the value of the total kinetic energy
The total kinetic energy of the rolling ball, taking into account both its translational and rotational kinetic energy, is approximately 100.356 Joules. This is calculated by considering the mass, linear speed, radius, moment of inertia, and angular velocity of the ball.
a) The total kinetic energy of the rolling ball can be expressed as the sum of its translational kinetic energy and rotational kinetic energy.
The translational kinetic energy (Kt) is given by the formula: Kt = 0.5 * M * v^2, where M is the mass of the ball and v is its linear speed.
The rotational kinetic energy (Kr) is given by the formula: Kr = 0.5 * I * ω^2, where I is the moment of inertia of the ball and ω is its angular velocity.
Since the ball is rolling without slipping, the linear speed v is related to the angular velocity ω by the equation: v = R * ω, where R is the radius of the ball.
Therefore, the total kinetic energy (Kior) of the ball can be expressed as: Kior = Kt + Kr = 0.5 * M * v^2 + 0.5 * I * (v/R)^2.
b) To find the moment of inertia (I) of the ball, we can rearrange the equation for ω in terms of v and R: ω = v / R.
Substituting the values, we have: ω = 4.5 m/s / 0.108 m = 41.67 rad/s.
The moment of inertia (I) can be calculated using the equation: I = (2/5) * M * R^2.
Substituting the values, we have: I = (2/5) * 7.5 kg * (0.108 m)^2 = 0.08712 kg·m².
c) Plugging in the values from part b) into the formula from part a) for the total kinetic energy (Kior):
Kior = 0.5 * M * v^2 + 0.5 * I * (v/R)^2
= 0.5 * 7.5 kg * (4.5 m/s)^2 + 0.5 * 0.08712 kg·m² * (4.5 m/s / 0.108 m)^2
= 91.125 J + 9.231 J
= 100.356 J.
Therefore, the total kinetic energy of the ball, with the given values, is approximately 100.356 Joules.
learn more about "inertia":- https://brainly.com/question/1140505
#SPJ11
A police car is moving to the right at 27 m/s, while a speeder is coming up from behind at a speed 36 m/s, both speeds being with respect to the ground. The police officer points a radar gun at the oncoming speeder. Assume that the electromagnetic wave emitted by the gun has a frequency of 7.5×109 Hz. Find the difference between the frequency of the wave that returns to the police car after reflecting from the speeder's car and the frequency emitted by the police car.
In this scenario, a police car is moving to the right at 27 m/s, and a speeder is approaching from behind at 36 m/s.
The police officer points a radar gun at the speeder, emitting an electromagnetic wave with a frequency of 7.5×10^9 Hz. The task is to find the difference between the frequency of the wave that returns to the police car after reflecting from the speeder's car and the frequency emitted by the police car.
The frequency of the wave that returns to the police car after reflecting from the speeder's car is affected by the relative motion of the two vehicles. This phenomenon is known as the Doppler effect.
In this case, since the police car and the speeder are moving relative to each other, the frequency observed by the police car will be shifted. The Doppler effect formula for frequency is given by f' = (v + vr) / (v + vs) * f, where f' is the observed frequency, v is the speed of the wave in the medium (assumed to be the same for both the emitted and reflected waves), vr is the velocity of the radar gun wave relative to the speeder's car, vs is the velocity of the radar gun wave relative to the police car, and f is the emitted frequency.
In this scenario, the difference in frequency can be calculated as the observed frequency minus the emitted frequency: Δf = f' - f. By substituting the given values and evaluating the expression, the difference in frequency can be determined.
Learn more about electromagnetic here: brainly.com/question/31038220
#SPJ11
An object is 2m away from a convex mirror in a store, its image
is 1 m behind the mirror. What is the focal length of the
mirror?
The focal length of the convex mirror is -2 m. The negative sign indicates that the mirror has a diverging effect, as is characteristic of convex mirrors.
To determine the focal length of a convex mirror, we can use the mirror equation:
1/f = 1/d_o + 1/d_i
Where f is the focal length, d_o is the object distance (distance of the object from the mirror), and d_i is the image distance (distance of the image from the mirror).
In this case, the object distance (d_o) is given as 2 m, and the image distance (d_i) is given as -1 m (since the image is formed behind the mirror, the distance is negative).
Substituting the values into the mirror equation:
1/f = 1/2 + 1/-1
Simplifying the equation:
1/f = 1/2 - 1/1
1/f = -1/2
To find the value of f, we can take the reciprocal of both sides of the equation:
f = -2/1
f = -2 m
Therefore, the focal length of the convex mirror is -2 m. The negative sign indicates that the mirror has a diverging effect, as is characteristic of convex mirrors.
Learn more about a convex mirror:
https://brainly.com/question/32811695
#SPJ11
A satellite revolving around Earth has an orbital radius of 1.5 x 10^4 km. Gravity being the only force acting on the satele calculate its time period of motion in seconds. You can use the following numbers for calculation: Mass of Earth = 5.97 x 10^24 kg Radius of Earth = 6.38 x 10^3 km Newton's Gravitational Constant (G) = 6.67 x 10^-11 N m^2/kg^2 Mass of the Satellite = 1050 kg O a. 1.90 x 10^4 s O b. 4.72 x 10^3 s O c. 11.7 x 10^7 s O d. 3.95 x 10^6 s O e. 4.77 x 10^2 s O f. 2.69 x 10^21 s
The time period of motion of a satellite revolving around Earth with an orbital radius of 1.5 x 10^4 km is 67805.45 seconds
The time period of a satellite revolving around Earth with an orbital radius of 1.5 x 10^4 km can be calculated as follows: Given values are:
Mass of Earth (M) = 5.97 x 10^24 kg
Radius of Earth (R) = 6.38 x 10^3 km
Newton's Gravitational Constant (G) = 6.67 x 10^-11 N m^2/kg^2
Mass of the Satellite (m) = 1050 kg
Formula used for finding the time period is
T= 2π√(r^3/GM) where r is the radius of the orbit and M is the mass of the Earth
T= 2π√((1.5 x 10^4 + 6.38 x 10^3)^3/(6.67 x 10^-11 x 5.97 x 10^24))T = 2π x 10800.75T = 67805.45 seconds
The time period of motion of the satellite is 67805.45 seconds.
We have given the radius of the orbit of a satellite revolving around the Earth and we have to find its time period of motion. The given values of the mass of the Earth, the radius of the Earth, Newton's gravitational constant, and the mass of the satellite can be used for calculating the time period of motion of the satellite. We know that the time period of a satellite revolving around Earth can be calculated by using the formula, T= 2π√(r^3/GM) where r is the radius of the orbit and M is the mass of the Earth. Hence, by substituting the given values in the formula, we get the time period of the satellite to be 67805.45 seconds.
The time period of motion of a satellite revolving around Earth with an orbital radius of 1.5 x 10^4 km is 67805.45 seconds.
To know more about Gravitational Constant visit
brainly.com/question/17239197
#SPJ11
Two capacitors, C, = 6.10 MF and Cz = 3.18 F, are connected in parallel, then the combination is connected to a 250 V battery. When the capacitors are charged, each one is removed from the circuit. Next, the two charged capacitors are connected to each other so that the positive plate of one
capacitor is connected to the negative plate of the other capacitor. What is the resulting charge on each capacitor (in uC)?
The resulting charge on each capacitor, both when connected in parallel to the battery and when connected to each other in series, is approximately 2.32 µC.
When capacitors are connected in parallel, the voltage across them is the same. Therefore, the voltage across the combination of capacitors in the first scenario (connected in parallel to the battery) is 250 V.
For capacitors connected in parallel, the total capacitance (C_total) is the sum of individual capacitances:
C_total = C1 + C2
Given:
C1 = 6.10 µF = 6.10 × 10^(-6) F
C2 = 3.18 F
C_total = C1 + C2
C_total = 6.10 × 10^(-6) F + 3.18 × 10^(-6) F
C_total = 9.28 × 10^(-6) F
Now, we can calculate the charge (Q) on each capacitor when connected in parallel:
Q = C_total × V
Q = 9.28 × 10^(-6) F × 250 V
Q ≈ 2.32 × 10^(-3) C
Therefore, the resulting charge on each capacitor when connected in parallel to the battery is approximately 2.32 µC.
When the capacitors are disconnected from the circuit and connected to each other in series, the charge remains the same on each capacitor.
Thus, the resulting charge on each capacitor when they are connected to each other in series is also approximately 2.32.
To learn more about voltage, Visit:
https://brainly.com/question/30764403
#SPJ11
a A simple refractor telescope has an objective lens with a focal length of 1.6 m. Its eyepiece has a 3.80 cm focal length lens. a) What is the telescope's angular magnification?
The telescope's angular magnification is approximately -42.11, indicating an inverted image.
Angular magnification refers to the ratio of the angle subtended by an object when viewed through a magnifying instrument, such as a telescope or microscope, to the angle subtended by the same object when viewed with the eye. It quantifies the degree of magnification provided by the instrument, indicating how much larger an object appears when viewed through the instrument compared to when viewed without it.
The angular magnification of a telescope can be calculated using the formula:
Angular Magnification = - (focal length of the objective lens) / (focal length of the eyepiece)
Given:
Focal length of the objective lens (f_objective) = 1.6 mFocal length of the eyepiece (f_eyepiece) = 3.80 cm = 0.038 mPlugging these values into the formula:
Angular Magnification = - (1.6 m) / (0.038 m)
Simplifying the expression:
Angular Magnification ≈ - 42.11
Therefore, the angular magnification of the telescope is approximately -42.11. Note that the negative sign indicates an inverted image.
To learn more about angular magnification, Visit:
https://brainly.com/question/28325488
#SPJ11
Imagine two parallel wires of equal current, with the currents both heading along the x-axis. Suppose that the current in each wire is I, and that the wires are separated by a distance of one meter. The magnitude of the magnetic force per unit length between the two wires is given by E = a × 10-N/m x /m What is the value of a , if I = 4 amps? L
The magnitude of the magnetic force per unit length between the two wires is given by E = a × 10-N/m & the value of 'a' from the calculation we can get is 8.
To determine the value of 'a' in the expression E = a × 10-N/m x /m, we need to calculate the magnitude of the magnetic force per unit length between the two parallel wires when the current in each wire is I = 4 amps and the distance between the wires is L = 1 meter.
The magnetic force per unit length between two parallel wires carrying current can be calculated using the formula:
E = (μ₀ * I₁ * I₂) / (2πd)
where μ₀ is the permeability of free space (μ₀ ≈ [tex]4 \pi * 10^{-7[/tex] T·m/A), I₁ and I₂ are the currents in the wires, and d is the distance between the wires.
Plugging in the given values:
E = ([tex]4 \pi * 10^{-7[/tex]T·m/A * 4 A * 4 A) / (2π * 1 m)
E = ([tex]16 \pi * 10^{-7[/tex]T·m/A²) / (2π * 1 m)
E = [tex]8 * 10^{-7[/tex] T/m
Comparing this with the given expression E = a * 10-N/m x /m, we can see that 'a' must be equal to 8 to match the calculated value of E.
To know more about magnetic force refer here
https://brainly.com/question/10353944#
#SPJ11
EM radiation has an average intensity of 1700 W/m2. Which of the following statements about the E or B fields in this radiation is correct? Erms = 800.2 N/C Bmax = 4.42 x 10-6 T Brms = 2.29 x 10-6 T Emax = 1500.0 N/C At a certain place on the surface of the earth, the sunlight has an intensity of about 1.8 x 103 W/m². What is the total electromagnetic energy from this sunlight in 5.5 m³ of space? (Give your answer in joules but don't include the units.) Click Submit to complete this assessment. Question 12 of
The correct statement about the E or B fields in radiation is that Erms = 800.2 N/C.
EM (electromagnetic) radiation has an average intensity of 1700 W/m². As a result, the electrical field (Erms) is related to the average intensity through the equation E = cB, where E is the electric field, B is the magnetic field, and c is the speed of light.
Erms is related to the average intensity I (in W/m²) through the formula Erms = sqrt(2 I / c ε) which is approximately equal to 800.2 N/C.
For a 5.5 m³ space on the earth's surface, the total electromagnetic energy from sunlight with an intensity of 1.8 x 103 W/m² is 9.9 x 106 J.
The formula for calculating the energy is E = I × A × t, where E is the energy, I is the intensity, A is the area, and t is the time.
Here, the area is 5.5 m³ and the time is 1 second, giving an energy of 9.9 x 106 J.
Learn more about electric field here:
https://brainly.com/question/15800304
#SPJ11
Vertically polarized light of intensity lo is incident on a polarizer whose transmission axis is at an angle of 70° with the vertical. If the intensity of the transmitted light is measured to be 0.34W/m² the intensity lo of the incident light is 0.43 W/m 1.71 W/m 2.91 W/m 0.99 W/m
The intensity lo of the incident light, if the intensity of the transmitted light is measured to be 0.34W/m² is 1.050 W/m². So none of the options are correct.
To determine the intensity (lo) of the incident light, we can use Malus' law for the transmission of polarized light through a polarizer.
Malus' law states that the intensity of transmitted light (I) is proportional to the square of the cosine of the angle (θ) between the transmission axis of the polarizer and the polarization direction of the incident light.
Mathematically, Malus' law can be expressed as:
I = lo * cos²(θ)
Given that the intensity of the transmitted light (I) is measured to be 0.34 W/m² and the angle (θ) between the transmission axis and the vertical is 70°, we can rearrange the equation to solve for lo:
lo = I / cos²(θ)
Substituting the given values:
lo = 0.34 W/m² / cos²(70°)
The value of cos²(70°) as approximately 0.3236. Plugging this value into the equation:
lo = 0.34 W/m² / 0.3236
lo = 1.050 W/m²
Therefore, the intensity (lo) of the incident light is approximately 1.050 W/m².
To learn more about intensity: https://brainly.com/question/28145811
#SPJ11
A medium-sized banana provides about 105 Calories of energy. HINT (a) Convert 105 Cal to joules. (b) Suppose that amount of energy is transformed into kinetic energy of a 2.13 kg object initially at rest. Calculate the final speed of the object (in m/s). m/s J (c) If that same amount of energy is added to 3.79 kg (about 1 gal) of water at 19.7°C, what is the water's final temperature (in °C)?
(a) To convert 105 Calories to joules, multiply by 4.184 J/cal.
(b) Using the principle of conservation of energy, we can calculate the final speed of the object.
(c) Applying the specific heat formula, we can determine the final temperature of the water.
To convert Calories to joules, we can use the conversion factor of 4.184 J/cal. Multiplying 105 Calories by 4.184 J/cal gives us the energy in joules.
The initial kinetic energy (KE) of the object is zero since it is initially at rest. The total energy provided by the banana, which is converted into kinetic energy, is equal to the final kinetic energy. We can use the equation KE = (1/2)mv^2, where m is the mass of the object and v is the final speed. Plugging in the known values, we can solve for v.
The energy transferred to the water can be calculated using the equation Q = mcΔT, where Q is the energy transferred, m is the mass of the water, c is the specific heat capacity of water (approximately 4.184 J/g°C), and ΔT is the change in temperature. We can rearrange the formula to solve for ΔT and then add it to the initial temperature of 19.7°C to find the final temperature.
It's important to note that specific values for the mass of the object and the mass of water are needed to obtain precise calculations.
learn more about "temperature ":- https://brainly.com/question/27944554
#SPJ11
Two spheres with uniform surface charge density, one with a radius of 7.1 cm and the other with a radius of 4.2 cm, are separated by a center-to-center distance of 38 cm. The spheres have a combined charge of + 55jC and repel one another with a
force of 0.71 N. Assume that the chargo of the first sphote is
eator than the charge o the second sobore
What is tho surface chargo density on the sobero bi radicie 7 12
The surface charge density can be calculated by using the formula:σ=q/A, where σ = surface charge density, q = charge of a spherical object A = surface area of a spherical object. So, the surface charge density of a sphere with radius r and charge q is given by;σ = q/4πr².
The total charge of the spheres, q1 + q2 = 55 μC. The force of repulsion between the two spheres, F = 0.71 N.
To find, The surface charge density on the sphere with radius 7.1 cm,σ1 = q1/4πr1². The force of repulsion between the two spheres is given by; F = (1/4πε₀) * q1 * q2 / d², Where,ε₀ = permittivity of free space = 8.85 x 10^-12 N^-1m^-2C²q1 + q2 = 55 μC => q1 = 55 μC - q2.
We have two equations: F = (1/4πε₀) * q1 * q2 / d²σ1 = q1/4πr1². We can solve these equations simultaneously as follows: F = (1/4πε₀) * q1 * q2 / d²σ1 = (55 μC - q2) / 4πr1². Putting the values in the first equation and solving for q2:0.71 N = (1/4πε₀) * (55 μC - q2) * q2 / (38 cm)²q2² - (55 μC / 0.71 N * 4πε₀ * (38 cm)²) * q2 + [(55 μC)² / 4 * (0.71 N)² * (4πε₀)² * (38 cm)²] = 0q2 = 9.24 μCσ1 = (55 μC - q2) / 4πr1²σ1 = (55 μC - 9.24 μC) / (4π * (7.1 cm)²)σ1 = 23.52 μC/m².
Therefore, the surface charge density on the sphere with radius 7.1 cm is 23.52 μC/m².
Let's learn more about surface charge density :
https://brainly.com/question/14306160
#SPJ11