Answer:
concentration of diluted solution = 0.0125 ( ± 0.0002)M
Uncertainty = ± 0.0002
Explanation:
Given that
Initial volume of Cu2+ = 4.00 (±0.01) mL
Initial molarity 0f Cu2+ = 0.302 (±0.004) M
transferred to 100.00 (±0.08) Class A volumetric flask
first we get amount of water added
100.00 (±0.08) - 4.00 (±0.01) = 96 ± (0.09)
Now according to law of dilution
The concentration of Cu2+ after adding water
M1V1 = M2V2
we substitute
0.302 (±0.004) * 4.00 (±0.01) = x * 96 ± (0.09)
Now the multiplication of two digits with uncertainty is
(0.004/0.302) * 100 = 1.32% ; (0.01/4.00) * 100 = 0.25%
= [0.302 ( ± 1.32% )] * [ 4.00 ± (0.25%)]
= 1.208 ±(1.57%)
1.57/100 * 1.208 = 0.0189
so
= (1.208 ± 0.0189)
now substitute in our previous equation
1.208 ± (0.0189) = x * 96 ± (0.09)
x = 1.208 ± (0.0189) / 96 ± (0.09)
{ 0.09/96 * 100 = 0.094% }
so x = 1.208 ± (1.57%) / 96 ± (0.094% )
x = 0.0125 ± ( 1.664)
now( 1.664/100 * 0.0125)
= ± 0.000208
Hence
concentration of diluted solution = 0.0125 ( ± 0.0002)M
Uncertainty = ± 0.0002
Help me please, i’d appreciate it a lot! thank you!❤️
Explanation:
think so it is useful and sufficient for your question
Which statement correctly defines pasteurization?
Answer:
Pasteurization is the process by which liquids are heated to kill bacteria that may be present.
explanation I got the correct answer
Answer:
Pasteurization is the process by which liquids are heated to kill bacteria that may be present.
Explanation:
i just did that one
What property of matter is a
measure of the force of
gravity on an object?
Answer:
No matter where that object is in the vast universe, it will have the same mass. Weight, on the other hand, is a measure of how much gravitational force is exerted on an object.
55:55
The MSDS for benzene indicates that it is a clear liquid that has a substantial vapor pressure. It has a health rating of
2, a fire rating of 3, and a reactivity rating of O. It is a cancer-causing agent.
Based on this information, which statement about benzene is accurate?
O Benzene readily reacts with moist air.
O Benzene explodes if the container is shaken.
O Benzene must be kept away from flames.
O Benzene must be stored under high pressure.
Answer:
Benzene must be kept away from flames.
Explanation:
Hello,
In this case since MSDS tables show the potential risks of chemical compounds, for benzene which which has a substantial vapor pressure and a fire rating of 3, which means that is highly flammable (very likely to get on fire), we conclude then that benzene must be kept away from flames due to its high risk. The other options are incorrect since it has 0 reactivity, it is nor fragile so it is not affected by shaking and it could be storage at standard pressures since it is a liquid at standard conditions as well.
Regards.
Question you have about rocks or minerals
Explain how plastic can be both beneficial and detrimental at the same time.
Answer:
Detrimental- Toxic chemicals leach out of plastic and are found in the blood and tissue of nearly all of us. Exposure to them is linked to cancers, birth defects, impaired immunity, endocrine disruption and other ailments
Beneficial- Plastic packaging helps protect and preserve goods, while reducing weight in transportation,
A cannonball made of iron has a volume of 110. cm3. What is the mass, in kilograms, of the cannonball?
Answer:
1 cubic centimeter (cu cm) = 0.001 kilogram (kg)
110cm³ =110*0.001=0.11kg
Explanation:
The volume has been the space occupied by the object and substances and uses the derived units. The mass of the iron ball with a volume of 110 cubic centimeters is 0.11kg.
What is volume?
Volume has been the three-dimensional space that an object has been using in space. The volume can be measured differently for the various states of matter in various units. Volume is the physical parameter to measure the states of matter.
The estimation of the volume can be given by density or mass and has been expressed by the various units like liters, milliliters, cubic meters, cubic centimeters, kiloliters, cubic decimeters, gallons, etc.
The unit cubic centimeter can be converted into kilogram (kg) as:
1 cubic centimeter = 0.001 kilogram
Given,
The volume of a cannonball made of iron = 110 cubic centimeters
The unit conversion from cubic centimeter to kg is shown as:
1 cubic centimeter = 0.001 kg
110 cubic centimeters = 0.11 Kg
Therefore, 0.11 kilogram is the mass of a cannonball made of iron.
Learn more about volume, here:
https://brainly.com/question/13807002
#SPJ2
The elements carbon, hydrogen, oxygen, and nitrogen make up which percentage of the human body?
Answer:
96% Hope it helps
Explanation:
Roughly 96% of the mass of the human body is made up of just four elements: oxygen, carbon, hydrogen and nitrogen, with a lot of that in the form of water. The remaining 4% is a sparse sampling of the periodic table of elements.
The flask contains 10.0 mL of HCl and a few drops of phenolphthalein indicator. The buret contains 0.160 M NaOH. It requires 18.2 mL of the NaOH solution to reach the end point of the titration. A buret filled with a titrant is held above a graduated cylinder containing an analyte solution. What is the initial concentration of HCl
Answer:
Approximately [tex]0.291\; \rm M[/tex] (rounded to two significant figures.)
Explanation:
The unit of concentration [tex]\rm M[/tex] is the same as [tex]\rm mol \cdot L^{-1}[/tex] (moles per liter.) On the other hand, the volume of both the [tex]\rm NaOH[/tex] solution and the original [tex]\rm HCl[/tex] solution here are in milliliters. Convert these two volumes to liters:
[tex]V(\mathrm{NaOH}) = 18.2\; \rm mL = 18.2 \times 10^{-3}\; \rm L = 0.0182\; \rm L[/tex].[tex]V(\text{$\mathrm{HCl}$, original}) = 10.0\; \rm mL = 10.0\times 10^{-3}\; \rm L = 0.0100\; \rm L[/tex].Calculate the number of moles of [tex]\rm NaOH[/tex] in that [tex]0.0182\; \rm L[/tex] of [tex]0.160\; \rm M[/tex] solution:
[tex]\begin{aligned} n(\mathrm{NaOH}) &= c(\mathrm{NaOH})\cdot V(\mathrm{NaOH})\\ &= 0.160\; \rm mol \cdot L^{-1} \times 0.0182\; \rm L \approx 0.00291\; \rm mol\end{aligned}[/tex].
[tex]\rm HCl[/tex] reacts with [tex]\rm NaOH[/tex] at a one-to-one ratio:
[tex]\rm HCl\; (aq) + NaOH\; (aq) \to NaCl\; (aq) + H_2O\; (l)[/tex].
Coefficient ratio:
[tex]\displaystyle \frac{n(\mathrm{HCl})}{n(\mathrm{NaOH})} = 1[/tex].
In other words, one mole of [tex]\rm NaOH[/tex] would neutralize exactly one mole of [tex]\rm HCl[/tex]. In this titration, [tex]0.291\; \rm mol[/tex] of [tex]\rm NaOH\![/tex] was required. Therefore, the same amount of [tex]\rm HC[/tex] should be present in the original solution:
[tex]\begin{aligned}&n(\text{$\mathrm{HCl}$, original})\\ &= n(\mathrm{NaOH})\cdot \frac{n(\mathrm{HCl})}{n(\mathrm{NaOH})} \\ &\approx 0.00291\; \rm mol \times 1 = 0.00291\; \rm mol\end{aligned}[/tex].
Calculate the concentration of the original [tex]\rm HCl[/tex] solution:
[tex]\displaystyle c(\text{$\mathrm{HCl}$, original}) = \frac{n(\text{$\mathrm{HCl}$, original})}{V(\text{$\mathrm{HCl}$, original})} \approx \frac{0.00291\; \rm mol}{0.0100\; \rm L} \approx 0.291\; \rm M[/tex].
what ahppens when you free lava?
Answer:
It will melt everything and if lava goes into water it will become rock.
Hope this helped you!
Explanation:
Convert .0027 CL to mL.
Answer:
0.027 ml
Explanation:
[tex]1\:cl = 10\:ml\\0.0027 \: cl = x\:ml[/tex]
Cross Multiply
[tex]x = 0.027 \:ml[/tex]
Which of the following is a savanna? a. Veldts b. Plains c. Steppes d. Llanos
Answer:
d) Llanos
Explanation:
Answer:
D . Llanos
Explanation:
Imagine that you are developing a TLC plate, but you get distracted and forget to take the TLC plate out. Later, when you remove your TLC plate from the developing chamber, you notice that the solvent front has reached the top of the TLC plate. How will the Rf values from this TLC plate compare with those of a student who stopped developing their TLC plate before the solvent front reached the top of the plate
Answer:
The full form of TLC is Thin layer chromatography which is used in separating non volatile mixtures.
Explanation:
In the context, the Rf values could not be read properly or determined properly and accurately if the solvent front flows to the top of the plate. If the solvent reaches the plate's top, then the Rf values reading will be different from the TLC plate where the solvent did not reach the plate's top.
If the solvent front reaches the top, then it is not possible to accurately determine draw the line and to determine how far the spot went. And thus it would be difficult to solve the ratio as the plate would keep advancing or developing and also the compound spot keeps rising. As a result, spots reaches higher or rises than the normal rise but the solvent front does not change, it remains same. Thus, the Rf value would be completely off.
I can sort the way each object moves by
Answer:
By the way they move
Explanation:
hope this helps
The value of ΔG°′ΔG°′ for the conversion of glucose-6-phosphate to fructose-6-phosphate (F6P) is +1.67 kJ/mol+1.67 kJ/mol . If the concentration of glucose-6-phosphate at equilibrium is 2.95 mM2.95 mM , what is the concentration of fructose-6-phosphate? Assume a temperature of 25.0°C25.0°C .
Answer:
The concentration of fructose-6-phosphate is 1.50x10⁻³M
Explanation:
Gibbs Free energy, ΔG°, is defined as:
ΔG° = -RTln K
Where ΔG° = 1670J/mol
R is gas constant = 8.314J/molK
T is absolute temperature (25°C + 273.15 = 298.15K)
Thus, equilibrium constant, k, is:
1670J/mol = -8.314J/molK* 298.15K ln K
-0.6737 = ln K
0.5098 = K
K of the reaction:
G6P ⇄ F6P
is:
K = 0.5098 = [F6P] / [G6P]
As [G6P] is 2.95x10⁻³M:
0.5098 = [F6P] / [2.95x10⁻³M]
[F6P] = 1.50x10⁻³M
The concentration of fructose-6-phosphate is 1.50x10⁻³MHow many sig figs are there
5.00000008
Answer:
2 sig figs.
Explanation:
Sig Fig Rules:
Any non-zero digit is a significant figure.
Any zeros between 2 non-zero digits are significant figures.
Trailing zeros after the decimal are significant figures.
or the solution containing Zn2+(aq), n is 2, so the MM/n ratio will be the molar mass of Zn divided by 2: MM/n = (65.39 g/mol) / 2 = 32.70 g/mol Compare this theoretical value with your experimental result. If the plating efficiency is significantly less than 1, say it is 0.55, how would the observed MM/n ratio compare to the theoretical value?
Answer:
MM/n will be less than the theoretical value
Explanation:
Provided that
The plating efficiency is proportional to the element weight
i.e.
[tex]\frac{Zn^2}{(aq)}[/tex]
That represents [tex]\frac{MM}{n\ value}[/tex]
So,
MM by N value is
= 65.39 g /mol ÷ 2
= 32.70 g/mol
Also, the experimental plating value is 0.55 that represents that it is much lesser than the normal value
So it would be concluded that the MM by N would be lower than the theoretical value
b.) If the half-life of Carbon-14 is 5230 years and I start with 100 grams, how long will it take for the
Carbon-14 to decay to 3.125 grams?
Answer:
26150 years
Explanation:
First we need to determine the number of half lives -- not years -- it'll take for 100g (of any element) to decay to 3.125 g
First Half Life 100/2 = 50
Seconf Half Life 50/2 = 25
Third Half Life 25/2 = 12.5
Fourth Half Life 12.5/2 = 6.25
Fifth Half Life 6.25/2 = 3.125
So it'll take 5 half lives for 100g to decay to 3.125g.
If the Half Life of Carbon-14 is 5230 and it will take 5 half lives, to determine the number of years we just need to multiply 5*5230
5*5230 = 26150
This means that it will take 26150 years for 100g Carbon-14 to decay to 3.125g.
Hope this helps!
To create increased pressure in the lungs which of the following muscles might be active? Mark all that apply. (A) External Intercostals (B) Internal Intercostals (C)Pectoralis major (D) Abdominal muscles (E) Diaphragm (F) Serratus anterior
Answer:
the diaphragm,the rib cage muscles and the abdominal muscles.
Explanation:
From a functional point of view, there are three groups of respiratory muscles: the diaphragm, the rib cage muscles and the abdominal muscles. Each group acts on the chest wall and its compartments, i.e. the lung-apposed rib cage, the diaphragm-apposed rib cage and the abdomen.
why is a lot of energy needed to break covalent bonds
Answer:
The strength of a bond between two atoms increases as the number of electron pairs in the bond increases.
Explanation:
In which of does the convection only occur in
A. Gases
B. Fluids
C. Liquids
D. Solids
Answer:
B. Fluids
I hope this helps!
Answer:
B
Explanation:
What happens to the principle energy level number when moving from s to p sub levels
Answer:
The principal energy level remains the same
Explanation:
A principal energy level is one defines where electrons reside in an atom and that can contain one or more sub levels and have 2·n² number of electrons located in different sub levels within the energy level. Therefore, when moving up from s to p within the same principal energy level, the principal energy level does not change value.
Identify the characteristics of a good recrystallization solvent. Select one or more: Dissolves a chemical sample well at high temperatures. Is not an organic liquid with a low boiling point. Does not dissolve a chemical sample well at low temperatures. Does not dissolve a chemical sample well at high temperatures. Dissolves a chemical sample well at low temperatures. g
Answer:
Dissolves a chemical sample well at high temperatures.
Does not dissolve a chemical sample well at low temperatures.
Explanation:
Recrystallization involves the dissolution of the solute in a solvent at high temperature. As the solution cools, it becomes saturated and the solute crystallizes out of the solution.
A good recrystallization solvent must only dissolve the solute at high temperature and must not dissolve it at low temperature. Hence, these are the two conditions required for any good recrystallization solvent.
The formula for a compound containing sodium and oxide ions would contain... This
compound would have an overall ... charge.
Answer:
Explanation:
the formula of the compound containing sodium and oxide ion is
NaOH the charge on sodium is partial positive and the charge on hydroxide ion is partial negative
another compound containing sodium and oxide ion is Na2O here the charge on sodium oxide is neutral
Cuci
what is the formula?
Answer:
Copper(I) chloride, commonly called cuprous chloride, is the lower chloride of copper, with the formula CuCl. The substance is a white solid sparingly soluble in water, but very soluble in concentrated hydrochloric acid. Impure samples appear green due to the presence of copper(II) chloride.
Explanation:
Please mark me brainliest
What is a nebula? ...........................
a cloud of gas and dust in outer space, visible in the night sky either as an indistinct bright patch or as a dark silhouette against other luminous matter.
a clouded spot on the cornea causing defective vision.
Hope this helped
Answer:
A cloud of gas and dust in outer space, visible in the night sky either as an indistinct bright patch or as a dark silhouette against other luminous matter.
Explanation:
Please help asap!! Need help for problem #2.
Naturally occuring iron, contains 5.82% ^54Fe, 91.66% ^56Fe, 2.19% ^57Fe, and 0.33% ^58Fe. The reslective atomic masses are 53.940 amu, 55.935 amu, 56.935 amu and 57.933 amu. Calculate the average atmoic mass of iron. (show work)
Answer:
55.56 amu
Explanation:
Let A, B, C and D represent the four isotopes of iron.
The following data were obtained from the question:
Isotope A (Fe-54):
Mass of A = 53.940 amu
Abundance (A%) = 5.82%
Isotope B (Fe-56):
Mass of B = 55.935 amu
Abundance (B%) = 91.66%
Isotope C (Fe-57):
Mass of C = 56.935 amu
Abundance (C%) = 2.19%
Isotope D (Fe-58):
Mass of D = 57.933 amu
Abundance (D%) = 0.33%
Average atomic mass =.?
The average atomic mass of the iron can obtained as follow:
Average atomic mass = [(mass of A × A%)/100] + [(mass of B × B%)/100] + [(mass of C × C%)/100] + [(mass of D × D%)/100]
Average atomic mass = [(53.940 × 5.82)/100] + [(55.935 × 91.66 )/100] + [(56.935 × 2.19)/100] + [(57.933 × 0.33)/100]
= 2.848 + 51.270 + 1.247 + 0.191
= 55.56 amu
Therefore, the average atomic mass of the iron is 55.56 amu
Which set of elements has 4 valence electrons?
Answer:
carbon group
All the carbon group atoms, having four valence electrons, form covalent bonds with nonmetal atoms; carbon and silicon cannot lose or gain electrons to form free ions, whereas germanium, tin, and lead do form metallic ions but only with two positive charges.
The set of elements that has 4 Valence electrons are the carbon group.
What are valence electrons?Valence electrons are those electrons that are found at the outermost shell of an element that can go into formation of chemical bonds with another element on a chemical reaction.
The group 14 elements in the periodic table are known to have a four Valence electron on their outermost shell.
Learn more about atom here:
https://brainly.com/question/26952570
#SPJ6
An open-topped tub is filled completely to the top edge with solid ice. What will happen when the ice melts?
A)
The tub will overflow.
B)
In the process of melting, 9 percent of the water will be converted to water vapor.
C)
The level of the water will be lower than the edge of the tub.
D)
There will be no change in the level of the tub.
Answer:
d
Explanation:
Answer:
B
Explanation:
1) Chemistry is a (physical/biological) science?
Answer:
Explanation:
Biological.
I hope I helped you! :)