Answer:
16,931 turnsExplanation:
The magnetic field produced is expressed using the formula
[tex]B = \frac{\mu_0NI}{L}[/tex]
B is the magnetic field = 0.30T
I is the current produced in the coil = 4.5A
[tex]\mu_0[/tex] is the magnetic permittivity in vacuum = 1.26*10^-6Tm/A
L is the length of the solenoid = 32 cm = 0.32 m
N is the number of turns in the solenoid.
Making N the subject of the formula from the equation above;
[tex]B = \frac{\mu_0NI}{L}\\\\BL = \mu_0NI\\\\Dividing\ both\ sides \ by \ \mu_0I\\\\\frac{BL}{\mu_0I} =\frac{\mu_oNI}{\mu_0I} \\\\[/tex]
[tex]N = \frac{BL}{\mu_0I}[/tex]
Substituting the give values to get N;
[tex]N = \frac{0.3*0.32}{1.26*10^{-6} * 4.5}\\\\N = \frac{0.096}{0.00000567} \\\\N = 16,931.21[/tex]
The number of turns the solenoid must have is approximately 16,931 turns
A loaded ore car has a mass of 950 kg and rolls on rails with negligible friction. It starts from rest and is pulled up a mine shaft by a cable connected to a winch. The shaft is inclined at 28.0° above the horizontal. The car accelerates uniformly to a speed of 2.35 m/s in 14.0 s and then continues at constant speed.(A) What power must the winch motor provide when the car is moving at constant speed? kW(B) What maximum power must the motor provide? kW(C) What total energy transfers out of the motor by work by the time the car moves off the end of the track, which is of length 1,250 m?
Answer:
a) P = 10.27 kW
b) Pmax = 10.65 kW
c) E = 5.47 MJ
Explanation:
Mass of the loaded car, m = 950 kg
Angle of inclination of the shaft, θ = 28°
Acceleration due to gravity, g = 9.8 m/s²
The speed of the car, v = 2.35 m/s
Change in time, t = 14.0 s
a) The power that must be provided by the winch motor when the car is moving at constant speed.
P = Fv
The force exerted by the motor, F = mg sinθ
P = mgv sinθ
P = 950 * 9.8 *2.35* sin28°
P = 10,271.3 W
P = 10.27 kW
b) Maximum power that the motor must provide:
[tex]P = mv\frac{dv}{dt} + mgvsin \theta\\dv/dt = \frac{2.35 - 0}{14} \\dv/dt = 0.168 m/s^2\\P = (950*2.35*0.168) + (950*9.8*2.35* sin28)\\P = 374.74 + 10271.3\\P = 10646.04 W\\10.65 kW[/tex]
c) Total energy transferred:
Length of the track, d = 1250 m
[tex]E = 0.5 mv^2 + mgd sin \theta\\E = (0.5 * 950 * 2.35^2) + (950 * 9.8 * 1250 * sin 28)\\E = 2623.19 + 5463475.31\\E = 5466098.50 J\\E = 5.47 MJ[/tex]
If you were to experimentally determine the length of the pendulum, why would you not get the same length in Iowa?
Answer:
The length of the pendulum depends on acceleration due to gravity (g) which varies in different Earth's location beacuse Earth is not perfectly spherical.
Explanation:
The period of oscillation is calculated as;
[tex]T = 2\pi\sqrt{\frac{l}{g} }[/tex]
where;
L is the length of the pendulum bob
g is acceleration due to gravity
If we make L the subject of the formula in the equation above, we will have;
[tex]T = 2\pi\sqrt{\frac{l}{g}}\\\\\sqrt{\frac{l}{g} } = \frac{T}{2\pi} \\\\\frac{l}{g} = (\frac{T}{2\pi} \)^2\\\\\frac{l}{g} =\frac{T^2}{4\pi^2}\\\\L = \frac{gT^2}{4\pi^2}[/tex]
The length of the pendulum depends on acceleration due to gravity (g).
Acceleration due to gravity is often assumed to be the same everywhere on Earth, but it varies because Earth is not perfectly spherical. The variation of acceleration due to gravity (g) as a result of Earth's geometry, will also cause the length of the pendulum to vary.
The vector indicates the instantaneous displacement of a projectile from the origin. At the instant when the projectile is at , its velocity and acceleration vectors are and . Which statement is correct?
Answer:
The only force acts on a projectile is gravitational force {Fg}, therefore its acceleration a=Fg/m will always directed towards the direction of force i.e. vertically downwards. Therefore it will always be perpendicular to the x direction or here we can say that a is always perpendicular to Vx}.
Explanation:
The vector r indicates the instantaneous displacement of a projectile from the origin. At the instant when the projectile is at r , its velocity and acceleration vectors are v and a . Which statement is correct?
lens is to be used to allow this eye to clearly focus on objects 25 cm in front of it. What should be the focal length of this lens
The nearpoint of an eye is 151 cm. A corrective lens is to be used to allow this eye to clearly focus on objects 25 cm in front of it. What should be the focal length of this lens?
Answer:
29.96cm
Explanation:
Using the corrective lens, the image should be formed at the front of the eye and be upright and virtual.
Now using the lens equation as follows;
[tex]\frac{1}{f} = \frac{1}{v} + \frac{1}{u}[/tex] -------------(i)
Where;
f = focal length of the lens
v = image distance as seen by the lens
u = object distance from the lens
From the question;
v = -151cm [-ve since the image formed is virtual]
u = 25cm
Rewrite equation (i) to have;
[tex]f = \frac{uv}{u+v}[/tex]
Substitute the values of v and u into the equation;
[tex]f = \frac{25*(-151)}{25-151}[/tex]
[tex]f = \frac{-3775}{-126}[/tex]
f = 29.96cm
The focal length should be 29.96cm
Value of g in CGS system
Answer:
in CGS system G is denoted as gram
Which of the following technologies is based on the work of Ibn al-Haytham?
A. Telescopes to observe the visible light of distant stars
B. Radiation treatments for breast cancer
C. Radar to detect the movement of storms
O D. An orbiting observatory to detect X-rays from space objects
Answer:
The answer is A
Explanation:
Its A because he created a telescope to be able to observe stars.
A proton moves at a speed 1.4 × 10^7 m/s perpendicular to a magnetic field. The field causes the proton to travel in a circular path of radius 0.85 m. What is the field strength?
0.17T
Explanation:
When a charged particle moves into a magnetic field perpendicularly, it experiences a magnetic force [tex]F_{M}[/tex] which is perpendicular to the magnetic field and direction of the velocity. This motion is circular and hence there is a balance between the centripetal force [tex]F_{C}[/tex] and the magnetic force. i.e
[tex]F_{C}[/tex] = [tex]F_{M}[/tex] --------------(i)
But;
[tex]F_{C}[/tex] = [tex]\frac{mv^2}{r}[/tex] [m = mass of the particle, r = radius of the path, v = velocity of the charge]
[tex]F_{M}[/tex] = qvB [q = charge on the particle, B = magnetic field strength, v = velocity of the charge ]
Substitute these into equation (i) as follows;
[tex]\frac{mv^2}{r}[/tex] = qvB
Make B subject of the formula;
B = [tex]\frac{mV}{qr}[/tex] ---------------(ii)
Known constants
m = 1.67 x 10⁻²⁷kg
q = 1.6 x 10⁻¹⁹C
From the question;
v = 1.4 x 10⁷m/s
r = 0.85m
Substitute these values into equation(ii) as follows;
B = [tex]\frac{1.67 * 10 ^{-27} * 1.4 * 10^{7}}{1.6 * 10^{-19} * 0.85}[/tex]
B = 0.17T
Therefore, the magnetic field strength is 0.17T
7. Which statement is true about teens that are in Marcia’s final state of identity formation?
Answer:
D. All of the above
Explanation:
The last stage in the Marcia's identity formation theory is Identity achievement. In this last stage, teens have made a thorough search or exploration about their identity and have made a commitment to that identity. This identity represents their values, beliefs, and desired goals. At this point, they know want they want in life, and can now make informed decisions based on their belief and ideology.
James Marcia is a psychologist known mainly for his research and theories in human identity. Identity according to him is the sum total of a person's beliefs, values, and ideologies that shape what a person actually becomes and is known for. Occupation and Ideologies primarily determine identity. The four stages of Identity status include, Identity diffusion, foreclosure, moratorium, and achievement.
A spherical shell rolls without sliding along the floor. The ratio of its rotational kinetic energy (about an axis through its center of mass) to its translational kinetic energy is:
Answer:
The ratio is [tex]\frac{RE}{TE} = \frac{2}{3}[/tex]
Explanation:
Generally the Moment of inertia of a spherical object (shell) is mathematically represented as
[tex]I = \frac{2}{3} * m r^2[/tex]
Where m is the mass of the spherical object
and r is the radius
Now the the rotational kinetic energy can be mathematically represented as
[tex]RE = \frac{1}{2}* I * w^2[/tex]
Where [tex]w[/tex] is the angular velocity which is mathematically represented as
[tex]w = \frac{v}{r}[/tex]
=> [tex]w^2 = [\frac{v}{r}] ^2[/tex]
So
[tex]RE = \frac{1}{2}* [\frac{2}{3} *mr^2] * [\frac{v}{r} ]^2[/tex]
[tex]RE = \frac{1}{3} * mv^2[/tex]
Generally the transnational kinetic energy of this motion is mathematically represented as
[tex]TE = \frac{1}{2} mv^2[/tex]
So
[tex]\frac{RE}{TE} = \frac{\frac{1}{3} * mv^2}{\frac{1}{2} * m*v^2}[/tex]
[tex]\frac{RE}{TE} = \frac{2}{3}[/tex]
Jerome solves a problem using the law of conservation of momentum. What should Jerome always keep constant for each object after the objects collide and bounce apart?
Jerome solves a problem using the law of conservation of momentum. What should Jerome always keep constant for each object after the objects collide and bounce apart?
a-velocity
b-mass
c-momentum
d-direction
Answer:
b. Mass
Explanation:
This question has to do with the principle of the law of conservation of momentum which states that the momentum of a system remains constant if no external force is acting on it.
As the question states, two objects collide with each other and eventually bounce apart, so their momentum may not be conserved but the mass of the objects is constant for each non-relativistic motion. Because of this, the mass of each object prior to the collision would be the same as the mass after the collision.
Therefore, the correct answer is B. Mass.
This question involves the concept of the law of conservation of momentum.
Jerome should always keep the "mass" of each object constant after the objects collide and bounce apart.
The law of conservation of momentum states that the momentum of a system of objects must remain constant before and after the collision has taken place.
Mathematically,
[tex]m_1u_1+m_2u_2=m_1v_1+m_v_2[/tex]
where,
m₁ = mass of the first object
m₂ = mass of the second object
u₁ = velocity of the first object before the collision
u₂ = velocity of the second object before the collision
v₁ = velocity of the first object after the collision
v₂ = velocity of the second object after the collision
Hence, it is clear from the formula that the only thing unchanged before and after the collision is the mass of each object.
Learn more about the law of conservation of momentum here:
brainly.com/question/1113396?referrer=searchResults
The attached picture illustrates the law of conservation of momentum.
What fundamental frequency would you expect from blowing across the top of an empty soda bottle that is 24 cm deep, if you assumed it was a closed tube
Answer:
f = 357.29Hz
Explanation:
In order to calculate the fundamental frequency in the closed tube, you use the following formula:
[tex]f_n=\frac{nv}{4L}[/tex] (1)
n: order of the mode = 1
v: speed of sound = 343m/s
L: length of the tube = 24cm = 0.24m
You replace the values of the parameters in the equation (1):
[tex]f_1=\frac{(1)(343m/s)}{4(0.24m)}=357.29Hz[/tex]
The fundamental frequency of in the tube is 357.29Hz
A student stretches an elastic band by 0.8 m in 0.5 seconds. The spring constant of the elastic band is 40 N/m. What was the power exerted by the student
Answer:
The power exerted by the student is 51.2 W
Explanation:
Given;
extension of the elastic band, x = 0.8 m
time taken to stretch this distance, t = 0.5 seconds
the spring constant, k = 40 N/m
Apply Hook's law;
F = kx
where;
F is the force applied to the elastic band
k is the spring constant
x is the extension of the elastic band
F = 40 x 0.8
F = 32 N
The power exerted by the student is calculated as;
P = Fv
where;
F is the applied force
v is velocity = d/t
P = F x (d/t)
P = 32 x (0.8 /0.5)
P = 32 x 1.6
P = 51.2 W
Therefore, the power exerted by the student is 51.2 W
A dielectric material such as paper is placed between the plates of a capacitor holding a fixed charge. What happens to the electric field between the plates
Answer:
Majorly the electric field is reduced among other effect listed in the explanation
Explanation:
In capacitors the presence of di-electric materials
1. decreases the electric fields
2. increases the capacitance of the capacitors.
3. decreases the voltage hence limiting the flow of electric current.
The di-electric material serves as an insulator between the metal plates of the capacitors
Determine the magnitude of the force between two 11 m-long parallel wires separated by 0.033 m, both carrying 5.2 A in the same direction.
Answer:
[tex]F=1.8\times 10^{-3}\ N[/tex]
Explanation:
We have,
Length of wires is 11 m
Separation between wires is 0.033 m
Current in both the wires is 5.2 A
It is required to find the magnitude of force between two wires. The force between wires is given by :
[tex]F=\dfrac{\mu_o I_1I_2l}{2\pi r}\\\\F=\dfrac{4\pi \times 10^{-7}\times 5.2\times 5.2\times 11}{2\pi \times 0.033}\\\\F=1.8\times 10^{-3}\ N[/tex]
So, the magnitude of force between wires is [tex]1.8\times 10^{-3}\ N[/tex]
Point A of the circular disk is at the angular position θ = 0 at time t = 0. The disk has angular velocity ω0 = 0.17 rad/s at t = 0 and subsequently experiences a constant angular acceleration α = 1.3 rad/s2. Determine the velocity and acceleration of point A in terms of fixed i and j unit vectors at time t = 1.7 s.
Given that,
Angular velocity = 0.17 rad/s
Angular acceleration = 1.3 rad/s²
Time = 1.7 s
We need to calculate the angular velocity
Using angular equation of motion
[tex]\omega=\omega_{0}+\alpha t[/tex]
Put the value in the equation
[tex]\omega=0.17+1.3\times1.7[/tex]
[tex]\omega=2.38(k)\ m/s[/tex]
We need to calculate the angular displacement
Using angular equation of motion
[tex]\theta=\theta_{0}+\omega_{0}t+\dfrac{\alpha t^2}{2}[/tex]
Put the value in the equation
[tex]\theta=0+0.17\times1.7+\dfrac{1.3\times1.7^2}{2}[/tex]
[tex]\theta=2.1675\times\dfrac{180}{\pi}[/tex]
[tex]\theta= 124.18^{\circ}[/tex]
We need to calculate the velocity at point A
Using equation of motion
[tex]v_{A}=v_{0}+\omega\times r[/tex]
Put the value into the formula
[tex]v_{A}=0+2.38(k) \times0.2(\cos(124.18)i+\sin(124.18)j))[/tex]
[tex]v_{A}=0.476\cos(124.18)j+0.476\sin(124.18)i[/tex]
[tex]v_{A}=(-0.267j-0.393i)\ m/s[/tex]
We need to calculate the acceleration at point A
Using equation of motion
[tex]a_{A}=a_{0}+\alpha\times r+\omega\times(\omega\times r)[/tex]
Put the value in the equation
[tex]a_{A}=0+1.3(k)\times0.2(\cos(124.18)i+\sin(124.18)j)+2.38\times2.38\times0.2(\cos(124.18)i+\sin(124.18)j)[/tex]
[tex]a_{A}=0.26\cos(124.18)i+0.26\sin(124.18)j+(2.38)^2\times0.2(\cos(124.18)i+\sin(124.18)j)[/tex]
[tex]a_{A}=-0.146j-0.215i−0.636i+0.937j[/tex]
[tex]a_{A}=0.791j-0.851i[/tex]
[tex]a_{A}=-0.851i+0.791j\ m/s^2[/tex]
Hence, (a). The velocity at point A is [tex](-0.267j-0.393i)\ m/s[/tex]
(b). The acceleration at point A is [tex](-0.851i+0.791j)\ m/s^2[/tex]
An ac series circuit contains a resistor of 20 ohms, a capacitor of 0.75 microfarads of 120 x 10-3 H. If an effective (rms) voltage of 120 V is applied, what is the effective (rms) current when the circuit is in resonance
Answer:
The effective (rms) current when the circuit is in resonance is 6 A
Explanation:
Given;
resistance of the resistor, R = 20 ohms
capacitance of the capacitor, C = 0.75 microfarads
inductance of the inductor, L = 0.12 H
effective rms voltage, [tex]V_{rms}[/tex] = 120
At resonance, the impedance Z = R, Since the capacitive reactance (Xc) is equal to inductive reactance (XL).
The effective (rms) current, = [tex]V_{rms}[/tex] / R
= 120 / 20
= 6 A
Therefore, the effective (rms) current when the circuit is in resonance is 6 A
What must the charge (sign and magnitude) of a 1.60 g particle be for it to remain balanced against gravity when placed in a downward-directed electric field of magnitude 680 N/C
Answer:
Explanation:
The charge must be negative so that force in a downward electric field will be upward so that its weight is balanced .
Let the charge be - q .
force on charge
= q x E where E is electric field
= q x 680
weight = 1.6 x 10⁻³ x 9.8
so
q x 680 = 1.6 x 10⁻³ x 9.8
q = 1.6 x 10⁻³ x 9.8 / 680
= 23 x 10⁻⁶ C
- 23 μ C .
A 100 cm length of nichrome wire has a radius of 0.50 mm, a resistivity LaTeX: \rho_0ρ 0= 1.0 × 10-6 Ω ∙ m , and a temperature coefficient LaTeX: \alphaα = 0.4 × 10-3 (oC)-1. At T0 = 20 oC the wire carries current of 0.50 A. How much power does the wire dissipate at a temperature T = 350 oC? Assume the potential difference across the ends of the wire remains constant. Group of answer choices
Answer:
P₃₅₀ = 0.28 watt
Explanation:
First we find the resistance of the wire at 20°C:
R₀ = ρL/A
where,
ρ = resistivity = 1 x 10⁻⁶ Ωm
L = Length of wire = 100 cm = 1 m
A = cross-sectional area of wire = πr² = π(0.5 x 10⁻³ m)² = 0.785 x 10⁻⁶ m²
Therefore,
R₀ = (1 x 10⁻⁶ Ωm)(1 m)/(0.785 x 10⁻⁶ m²)
R₀ = 1.27 Ω
Now, from Ohm's Law:
V = I₀R₀
where,
V = Potential Difference = ?
I₀ = Current Passing at 20°C = 0.5 A
Therefore,
V = (0.5 A)(1.27 Ω)
V = 0.64 volts
Now, we need to find the resistance at 350°C:
R₃₅₀ = R₀(1 + αΔT)
where,
R₃₅₀ = Resistance at 350°C = ?
α = temperature coefficient of resistance = 0.4 x 10⁻³ °C⁻¹
ΔT = Difference in Temperature = 350°C - 20°C = 330°C
Therefore,
R₃₅₀ = (1.27 Ω)[1 + (0.4 x 10⁻³ °C⁻¹)(330°C)]
R₃₅₀ = 1.44 Ω
Now, for power at 350°C:
P₃₅₀ = VI₃₅₀
where,
P₃₅₀ = Power dissipation at 350°C = ?
V = constant potential difference = 0.64 volts
I₃₅₀ = Current at 350°C = V/R₃₅₀ (From Ohm's Law)
Therefore,
P₃₅₀ = V²/R₃₅₉
P₃₅₀ = (0.64 volts)²/(1.44 Ω)
P₃₅₀ = 0.28 watt
in a certain region of space, the gravitational field is given by -k/r,where r=distance,k=const.if gravitational potential at r=r0 be v0,then what is the expression for the gravitational potential v?
options
1)k log(r/ro)
2)k log(ro/r)
3)vo+k log(r/ro)
4)vo+k log(ro/r)
plz help me out
I will mark u as brainliest if u answer correct
Answer:
The correct answer is option 3 .
Please check the answer once :)
A ball is shot at an angle of 45 degrees into the air with initial velocity of 46 ft/sec. Assuming no air resistance, how high does it go
Answer:
5.02 m
Explanation:
Applying the formula of maximum height of a projectile,
H = U²sin²Ф/2g...................... Equation 1
Where H = maximum height, U = initial velocity, Ф = angle, g = acceleration due to gravity.
Given: U = 46 ft/sec = 14.021 m/s, Ф = 45°
Constant: g = 9.8 m/s²
Substitute these values into equation 1
H = (14.021)²sin²45/(2×9.8)
H = 196.5884×0.5/19.6
H = 5.02 m.
Hence the ball goes 5.02 m high
The ball reaches the maximum height of 54 feet
The question is about projectile motion,
the ball is shot at an angle α = 45°, and
the initial velocity u = 46 ft/s.
Under the projectile motion, the maximum height H is given by:
[tex]H=\frac{u^2sin^2\alpha }{2g} [/tex]
where, g = 9.8 m/s²
substituting the given values we get:
[tex]H=\frac{46^2sin^{2}(45)}{2*9.8}\\ \\ H=\frac{46*46*(1/2)}{2*9.8}\\ \\ H=54 feet[/tex]
Hence, the maximum height is 54 feet.
Learn more:
https://brainly.com/question/2818076?referrer=searchResults
4. Chloe has a vertical velocity of 3 m/s when she leaves the 1 m diving board. At this instant, her center of gravity is 2.5 m above the water. How high above the water will Chloe go
Answer:
2.95m
Explanation:
Using h= 2.5+ v²/2g
Where v= 3m/s
g= 9.8m/s²
h= 2.95m
f the mass of the block is 2 kg, the radius of the circle is 0.8 m, and the speed of the block is 3 m/s, what is the tension in the string at the top of the circle
Answer:
the size are components relative to the whole.
Explanation:
they are particularly good at showing percentage or proportional data
In which direction does a bag at rest move when a force of 20 newtons is applied from the right?
ОА.
in the direction of the applied force
OB.
in the direction opposite of the direction of the applied force
OC. perpendicular to the direction of the applied force
OD
in a circular motion
Answer:
in the direction of the applied force
Explanation:
A 2kg block is sitting on a hinged ramp such that you can increase the angle of the incline. The coefficient of static friction between the block and the ramp is 0.67 and the coefficient of kinetic friction is 0.25.
a. What angle do you have to tilt the ramp to get the block to slide?
b. What acceleration does the block experience at this angle when kinetic friction takes over?
Answer:
θ = 33.8
a = 3.42 m/s²
Explanation:
given data
mass m = 2 kg
coefficient of static friction μs = 0.67
coefficient of kinetic friction μk = 0.25
solution
when block start slide
N = mg cosθ .............1
fs = mg sinθ ...............2
now we divide equation 2 by equation 1 we get
[tex]\frsc{fs}{N} = \frac{sin \theta }{cos \theta }[/tex]
[tex]\frac{\mu s N }{N}[/tex] = tanθ
put here value we get
tan θ = 0.67
θ = 33.8
and
when block will slide then we apply newton 2nd law
mg sinθ - fk = ma ...............3
here fk = μk N = μk mg cosθ
so from equation 3 we get
mg sinθ - μk mg cosθ = ma
so a will be
a = (sinθ - μk cosθ)g
put here value and we get
a = (sin33.8 - 0.25 cos33.8) 9.8
a = 3.42 m/s²
At a playground, two young children are on identical swings. One child appears to be about twice as heavy as the other. Part A If you pull them back together the same distance and release them to start them swinging, what will you notice about the oscillations of the two children
Answer:
The motion of the lighter child would look faster than that of the heavier child, but both have the same period of oscillation.
Explanation:
Oscillation is a type of simple harmonic motion which involves the to and fro movement of an object. The oscillation takes place at a required time called the period of oscillation.
Since the swings are similar, the period of oscillation of the two children are the same and they would complete one oscillation in the same time. Though the oscillation of the lighter child seems faster than that of the heavy child, their masses does not affect the period of oscillation.
When a heavy object oscillates, its mass increases the drag or damping force, but not the period of oscillation. Thus, it oscillate slowly.
An ideal gas in a cubical box having sides of length L exerts a pressure p on the walls of the box. If all of this gas is put into a box having sides of length 0.5L without changing its temperature, the pressure it exerts on the walls of the larger box will be...
p.
2p.
4p.
8p.
12p.
Answer:
2P
Explanation:
See attached file
I WILL MARK YOU AS BRAINLIEST!!! An object is launched straight up into the air with an initial velocity of 40 meters per second, from a height 30 m above the ground. Assuming that gravity pulls it down, changing its position by about 4.9 /2, after how many seconds will the object hit the ground? Enter your answer as a number rounded to the nearest tenth, such as: 42.5
Answer:
8.9 seconds
Explanation:
The height of the object at time t is:
y = h + vt − 4.9t²
where h is the initial height, and v is the initial velocity.
Given h = 30 and v = 40:
y = 30 + 40t − 4.9t²
When y = 0:
0 = 30 + 40t − 4.9t²
4.9t² − 40t − 30 = 0
Solving with quadratic formula:
t = [ -(-40) ± √((-40)² − 4(4.9)(-30)) ] / 2(4.9)
t = [ 40 ± √(1600 + 588) ] / 9.8
t = 8.9
It takes 8.9 seconds for the object to land.
Point charges q1=50μCq1=50μC and q2=−25μCq2=−25μC are placed 1.0 m apart. (a) What is the electric field at a point midway between them? (b) What is the force on a charge q3=20μCq3=20μC situated there?
Answer:
a) E = 2.7x10⁶ N/C
b) F = 54 N
Explanation:
a) The electric field can be calculated as follows:
[tex] E = \frac{Kq}{d^{2}} [/tex]
Where:
K: is the Coulomb's constant = 9x10⁹ N*m²/C²
q: is the charge
d: is the distance
Now, we need to find the electric field due to charge 1:
[tex] E_{1} = \frac{9 \cdot 10^{9} N*m^{2}/C^{2}*50 \cdot 10^{-6} C}{(0.5 m)^{2}} = 1.8 \cdot 10^{6} N/C [/tex]
The electric field due to charge 2 is:
[tex]E_{2} = \frac{9 \cdot 10^{9} N*m^{2}/C^{2}*(-25) \cdot 10^{-6} C}{(0.5 m)^{2}} = -9.0 \cdot 10^{5} N/C[/tex]
The electric field at a point midway between them is given by the sum of E₁ and E₂ (they are in the same direction, that is to say, to the right side):
[tex]E_{T} = E_{1} + E_{2} = 1.8 \cdot 10^{6} N/C + 9.0 \cdot 10^{5} N/C = 2.7 \cdot 10^{6} N/C to the right side[/tex]
Hence, the electric field at a point midway between them is 2.7x10⁶ N/C to the right side.
b) The force on a charge q₃ situated there is given by:
[tex]E_{T} = \frac{F_{T}}{q_{3}} \rightarrow F_{T} = E_{T}*q_{3}[/tex]
[tex] F = 2.7 \cdot 10^{6} N/C*20 \cdot 10^{-6} C = 54 N [/tex]
Therefore, the force on a charge q₃ situated there is 54 N.
I hope it helps you!
(a) The electric field at a point midway between [tex]q_1[/tex] and [tex]q_2[/tex] is obtained to be [tex]2.7\times 10^6 \,N/C[/tex].
(b) The electrostatic force on the third charge [tex]q_3[/tex] situated between [tex]q_1[/tex] and [tex]q_2[/tex] is obtained as 54 N.
The answer can be explained as follows.
Electric FieldGiven that the two charges are;
[tex]q_1 = 50\times 10^{-6}\,C[/tex] and [tex]q_2 = -25\times 10^{-6}\,C[/tex](a) At the midpoint; [tex]r = 0.5\,m[/tex].
We know that the electric field due to charge [tex]q_1[/tex].
[tex]E_1 = k\,\frac{q_1}{r^2}[/tex]Where, [tex]k=9\times 10^9\,Nm^2/C[/tex]
[tex]E_1 = (9\times 10^9) \times\frac{(50 \times 10^{-6})}{(0.5)^2}=1.8\times 10^6N/C[/tex]The electric field due to charge [tex]q_2[/tex] is given by;
[tex]E_2 = (9\times 10^9) \times\frac{(-25 \times 10^{-6})}{(0.5)^2}=-9\times 10^5\,N/C[/tex]Therefore, the net electric field in the midpoint is given by;
[tex]E_{net} =E_2+E_1[/tex][tex]\implies E_{net}=1.8 \times 10^6 N/C + 9 \times 10^5\,N/C=2.7\times 10^6\,N/C[/tex]The direction is towards the right side.
Electrostatic Force(b) Now, there is another charge [tex]q_3=20\times 10^{-6}[/tex] in the midpoint.
So the force on the charge is ;
[tex]F=E_{net} \times q_3=(2.7 \times 10^6\,N/C) \times (20\times 10^{-6}\,C)=54\,N[/tex]Find out more about electrostatic force and fields here:
https://brainly.com/question/14621988
key points that can be found in the realist philosophical position
Answer:
Key points that can be found in the realist philosophical position are as follows:
The view that we observe or identify is real, truly out there.The objects which are identified are independent of someone's perceptions, linguistic practices, conceptual scheme, and beliefs.Quantum mechanics is an example of philosophical realism that claims world is mind-independent.As a laudably skeptical physics student, you want to test Coulomb's law. For this purpose, you set up a measurement in which a proton and an electron are situated 971 nm from each other and you study the forces that the particles exert on each other. As expected, the predictions of Coulomb's law are well confirmed.
You find that the forces are attractive and the magnitude of each force is:______
Answer:
The magnitude of each force is 2.45 x 10⁻¹⁶ N
Explanation:
The charge of proton, +q = 1.603 x 10⁻¹⁹ C
The charge of electron, -q = 1.603 x 10⁻¹⁹ C
Distance between the two charges, r = 971 nm = 971 x 10⁻⁹ m
Apply Coulomb's law;
[tex]F = \frac{kq_1q_2}{r^2}[/tex]
where;
k is Coulomb's constant = 8.99 x 10⁹ Nm²/C²
q₁ and q₂ are the charges of proton and electron respectively
F is the magnitude of force between them
Substitute in the given values and solve for F
[tex]F = \frac{(8.99*10^9)(1.603*10^{-19})^2}{(971*10^{-9})^2} \\\\F = 2.45*10^{-16} \ N[/tex]
Therefore, the magnitude of each force is 2.45 x 10⁻¹⁶ N