A 20 ohm and 60 ohm light bulb are put in series together which one would be brighter?

Answers

Answer 1

Answer:

The 60 Ohm bulb would be brighter than the 20 Ohm bulb.

Explanation:

Hi there!

Ohm's Law: [tex]V=IR[/tex] where V is voltage, I is current and R is resistance

Power equation: [tex]P=VR[/tex]

The greater the power of a bulb, the brighter it is.

The bulbs are connected in series, meaning the the current travelling through each will be the same. Plug Ohm's law into the power equation so we just have I and R:

[tex]P=I^2R[/tex]

Because the current stays the same, the bulb with greater resistance will have greater power, hence being brighter. Therefore, the 60 Ohm bulb would be brighter than the 20 Ohm bulb.

I hope this helps!

Answer 2

Answer:

The 60 Ohm bulb would be brighter than the 20 Ohm bulb.

Explanation:

Hi there!

Ohm's Law: V=IRV=IR where V is voltage, I is current and R is resistance

Power equation: P=VRP=VR

The greater the power of a bulb, the brighter it is.

The bulbs are connected in series, meaning the the current travelling through each will be the same. Plug Ohm's law into the power equation so we just have I and R:

P=2RP=I

2

R

Because the current stays the same, the bulb with greater resistance will have greater power, hence being brighter. Therefore, the 60 Ohm bulb would be brighter than the 20 Ohm bulb.

I hope this helps!


Related Questions

on what factor does speed of sound depend​

Answers

Answer:

For sound waves to travel, there is a requirement of medium and density of the medium is considered to be one of the factors on which the speed of sound depends. When the medium is dense, the molecules in the medium are closely packed which means that the sound travels faster.

Explanation:

A train traveled 100 kilometers north in 2 hours. After exchanging some railroad cars, it traveled 100 kilometers south in 2 hours along the same track. Why has the train's velocity changed

Answers

Answer:Due to change in direction

Explanation:

Given

Initially train has traveled a 100 km in North and after exchanging some railroad cars, it traveled 100 in south.

The velocity of the train changes as it direction of motion changes. Velocity is the vector quantity which require direction and magnitude for its reperesentation.

How many types of galaxies are there?

a. 3

b. 4

c. 5

d. 6

Answers

The answer is 3 elliptical, spiral, and irregular.

HELP PLEASE
A virtual image is produced by a convex mirror that is 1.60 cm from the mirror. If the magnification is 0.20, how far from the mirror is the object?

Answers

1.80 If I had to guess

The distance of the object from the mirror Is = –8 cm

Calculation of the object distance of a mirror

The image distance from the mirror = –1.60cm

The magnification of the image = 0.20

The distance of the object from the mirror can be calculated using the formula below:

magnification= – image distance/ object distance

Substitute the available values into the equation above,

0.20 = – 1.60/ X

Make X the subject of formula,

X = – 1.60/0.20

X = – 8cm

The negative sign indicates that the image is virtual which is formed behind the mirror.

Therefore, the distance of the object from the mirror Is = –8 cm.

Learn more about mirror equations here:

https://brainly.com/question/26257987

Explain how frequency and amplitude affect sound vibrations?

Answers

Answer:

The larger the amplitude of the waves, the louder the sound. Pitch (frequency) – shown by the spacing of the waves displayed. The closer together the waves are, the higher the pitch of the sound.

Explanation:

When electrons flow through wires from a terminal to a terminal a/an _____
created

Answers

Answer:

When electrons flow through wires from a terminal to a terminal circuit is created.

Write a short narrative from the perspective of a mineral moving through the rock cycle. The mineral must undergo at least four changes.

Answers

Answer: Mineral and non- mineral components circulate in the environment in different forms whether it is in the form of solid, liquid, or gas.

Explanation:

Plants take up the minerals like calcium, potassium, nitrogen, sulphur, and others from the soil and utilize them for their survival and growth. These minerals are stored in the flowers, leaves, roots, and other plant parts and these plant parts are consumed by humans and animals. So, inorganic minerals from the soil are converted into organic forms by the plants again the minerals are decomposed into inorganic forms after the death of organisms and again mineral is converted into inorganic form in the soil and these minerals can become the component of the rocks after the sedimentation of the soil.

the M.E = K.E + P.E. If the M.E of the football is 150 J and when it's thrown the K.E is 70 J. What is the P.E of the football?

Answers

Answer:

M.E = K.E +P.E

150=70+P.E

P.E=150 –70

P.E=80J

expalin how waves energy and matter are related

Answers

They are related because waves affect matter. Reflection, refraction, and diffraction. Reflection occurs when wave bounces back from a surface that they cannot pass through. Refraction occurs when waves bend as they enter a new medium at an angle and start traveling at a different speed.

A (200 g) of water at (80 °C) is mixed with (100 g)of water at (20 °C). What is the final temperature of the water?

Answers

Answer:

60 °C

Explanation:

From the question given above, the following data were obtained:

Mass of 1st sample (M₁) = 200 g

Temperature of 1st sample (T₁) = 80 °C

Mass of 2nd sample (M₂) = 100 g

Temperature of 2nd sample (T₂) = 20 °C

Equilibrium temperature (Tₑ) =?

NOTE: Since the sample are the same, the specific heat capacity is constant.

We can obtain the equilibrium temperature as follow:

Heat lost by 1st = heat gained by the 2nd

M₁C(T₁ – Tₑ) = M₂C(Tₑ – T₂)

Cancel out C

M₁(T₁ – Tₑ) = M₂(Tₑ – T₂)

200 (80 – Tₑ) = 100 (Tₑ – 20)

Clear bracket

16000 – 200Tₑ = 100Tₑ – 2000

Collect like terms

16000 + 2000 = 100Tₑ + 200Tₑ

18000 = 300Tₑ

Divide both side by 300

Tₑ = 18000 / 300

Tₑ = 60 °C

Therefore, the equilibrium temperature (i.e the final temperature) of the mixture is 60 °C.

What is the magnification when an object is placed at 2f from the pole of the convex mirror? 

-2/ 3

-3/2

-1

-1/3​

Answers

Answer:

Linear magnification = 1/3

Explanation:

Given:

Convex mirror

Object's distance from pole = 2f

Find:

Linear magnification

Computation:

Object distance, u = −2f

So,

1/v + 1/u = 1/f

1/v + 1/(-2f) = 1/f

1/v = 1/f + 1/2f

BY taking LCM

1/v = 3 / 2f

v = 2f / 3

Magnification, M = -v / u

So,

Magnification, M = (2f / 3) / 2f

Magnification, M = 2f / 6f

Magnification, M = 2 / 6

Linear magnification = 1/3

 

Light travels through space at a speed of 3.0 x 108 m/s. A space probe is
traveling toward Earth at 2.5 * 108 m/s when one of its spotlights is turned
on. What speed would an observer on Earth measure for the light from the
spotlight?
O A. 2.5 * 108 m/s
O B. 3.0 x 108 m/s
O c. 5.5 x 108 m/s
O D. 0.5 x 108 m/s

Answers

Explanation:

The answer is (B). The speed of light is the same for all observers regardless of their motion relative to the light source.

The speed would an observer on Earth measures for the light from the spotlight will be 3×10⁸ m/sec.

What is speed?

Speed is defined as the rate of change of the distance or the height attained. it is a time-based quantity. it is denoted by u for the initial speed while v for the final speed. its si unit is m/sec.

The given data in the problem is;

The speed of light is, [tex]\rm C =3 \times 10^8\ m/sec[/tex]

All frames of reference have the same speed of light in a vacuum. Therefore the speed would an observer on Earth measures for the light from the spotlight will be 3×10⁸ m/sec.

Hence option B is correct.

To learn more about the speed refer to the link;

https://brainly.com/question/7359669

In what way may the turning effect of a force be increased?

By decreasing the perpendicular distance between the force and the pivot point

By lubricating the fulcrum with oil or grease.

By increasing the perpendicular distance between the force and the pivot point.

By reducing the applied force

Answers

Answer:

By increasing the perpendicular distance between the force and the pivot point

Explanation:

Due to the formula [tex]force * distance[/tex],

An increase in distance would cause the turning force to increase

Feel free to mark it as brainliest :D

help me calculate the kinetic energy (just the middle column) ASAP! SHOW WORK! ON PAPER

Answers

Answer:

Explanation:

I can tell you what the answers for the middle column are, but if you don't know how to solve total energy problems, they won't make any sense to you at all.

First row, KE = 0

Second row, KE = 220500 J

Third row, KE = 183750 J

Fourth row, KE = 205800 J

That's also not paying any attention to significant digits because your velocity only had 1 and that's not enough to do the problem justice. I left all the digits in the answer. Round how your teacher tells you to.

a car moving with a speed of 10 metre per second is accelerator at the rate of 2 metre per second square find its velocity after 6 seconds​

Answers

a = ( v(2) - v(1) ) ÷ ( t(2) - t(1) )

2 = ( v(2) - 10 ) ÷ ( 6 - 0 )

2 × 6 = v(2) - 10

v(2) = 12 + 10

v(2) = 22 m/s

An alpha particle (charge 2e) is sent at high speed toward an atomic nucleus. The electric force acting on the alpha particle is 79.8 N when it is 2.29 x 10(-14) m away from the nucleus. What is the charge on the atomic nucleus? (e = 1.60 x 10(-19) C, Kc = 9 x 10(9) N•m(2)/c(2)

Answers

Answer:

1.45×10⁻¹⁶ C

Explanation:

Applying,

F = kqq'/r²................ Equation 1

Where F = force acting on the alpha particle, k = coulomb's constant, q = charge on the alpha particle, q' = charge on the atomic nucleus, r = distance of seperation between the alpha particle and the atomic nucleus.

make q' the subject of the equation

q' = Fr²/(kq)................. Equation 2

From the question,

Given: F = 79.8 N, r = 2.29×10⁻¹⁴ m, q = 2e = (2×1.6×10⁻¹⁹) = 3.2×10⁻¹⁹ C, k = 9×10⁹ Nm²/C²

Substitute these values into equation 2

q' = [79.8×(2.29×10⁻¹⁴)²]/(3.2×10⁻¹⁹×9×10⁹)

q' = (4.18×10⁻²⁶)/(2.88×10⁻¹⁰)

q' = 1.45×10⁻¹⁶ C

The switch in a circuit breaker opens when which of the following in the circuit becomes too high?
A) current
B) resistance
C) static charge
D) total charge

Answers

Answer:

b) resistance

Explanation:

since resistance is responsible for heating, if it increases the circuit breaker opens breaking the flow of current to the circuit and thus preventing short circuits.

I'm walking 1.6m/s to 7-11 and it started to rain so I sped up to 2.7m/s in 1.2
seconds. What is my acceleration?
a=(vf-viyt
-0.92m/s2
O 01.1m/s2
0.92m/s2
1.1m/s2
1 points
Save A

Answers

Answer:

Explanation:

[tex]a = \frac{v_f-v_0}{t}[/tex] which is the final velocity minus the initial velocity in the numerator, and the change in time in the denominator.  For us:

[tex]a=\frac{2.7-1.6}{1.2}[/tex] so

a = .92 m/s/s (NOT negative because you're speeding up)

The voltage drop across any component is
the difference in voltage referenced to
between the two terminals of
the component.

Answers

Answer:

The voltage si the nevery Hokage de Naruto y fue su amigo

car moves a distance of 420 m. Each tire on the car has a diameter of 42 cm. Which shows how many revolutions each

tire makes as they move that distance?




Plzzzz help asap

Answers

Answer:

10 is the correct answer

Answer:

Total Distance: 420 meters

Diameter: 42 cm

Notice the units meters vs cm

420÷ 42 = 10 total revolutions

Astronomical observatories have been available since ancient times, and many cultures set aside special sites for astronomical observations. The thing modern observatories have that was missing from these older observatories until about 1610 was __________________. Group of answer choices

Answers

Answer:

The answer is "telescopes".

Explanation:

Throughout ancient times, astronomical observatories have indeed been available, and so many historical locations were reserved for astronomical observations. All contemporary astronomers lacked within those older telescopes were lenses until 1610. A telescope is indeed an instrument used to view far-off objects. Telescopes often are being used to look at planets and stars.

A bird in flight pushes itself upward with
a 7.28 N force. If the bird is climbing at a
constant rate of 1 m/s (no acceleration),
what is the weight of the bird?
[?] N

Answers

Answer:

The weight of the bird is equal to 7.28 N.

Explanation:

The upward force acting on the bird = 7.28 N

The bird is climbing at a constant rate of 1 m/s.

We need to find the weight of the bird.

We know that the weight of an object is the force of gravity acting on it. It can be calculated as follows :

W = mg

In this case, 7.28 N of force is acting on the object. Hence, the weight of the bird is equal to 7.28 N.

You have just learned that the planet core of Mars is no longer radiating heat like the core of Earth. With this information what would you communicate to building designers as the lead geologist in regards to suitable building locations on the surface of Mars? Remember your informing builders about locations that would best avoid natural disasters like marsquakes and volcanoes? What evidence or theories do you have to support your statements?

Answers

Answer:

Explanation:

That is a fun question!

Without a hot radiating core like Earth, Mars will have very different geological and seismic events. The Mars core will be relatively cold and there will not be any molten magma. So Mars will not have earthquakes or volcano activities. Both only occur when there is magma flowing or tectonic plate motion and they will not occur with a cold core.

Select the correct answer.
What does the number, or density, of field lines on a source charge indicate?
O A.
direction of charge on the source charge
OB.
amount of charge on the test charge
O c.
amount of charge on the source charge
OD.
direction of charge on the test charge
Reset
Next

Answers

Answer:

amount of charge on the source charge

what is the size of the electron charge?​

Answers

Answer:

It’s like medium uk

Explanation:

The size of electron charge is estimated to be 1.6 × 10-¹

An object of mass m slides down an incline with angle 0.

Which expression
shows the net force on the object along the surface of the incline?

A. mg cos(0) - FN
B. mg cos(0)
C. mg sin(0)
D. mg sin(0) - FN

Answers

Answer:

C. mg sin(θ)

Explanation:

The plane is incline and the only force acting in the object is the gravity, so you multiply mg per sin(θ) because sin(θ) gave you the part of the gravity acting in the horizontal direction parallel with the inclined surface

The expression shows the net force on the object along the surface of the incline is mg sin(θ).  The correct option is C.

What is Net force?

When two or more forces are acting on the system of objects, then the to attain equilibrium, net force must be zero.

An object of mass m slides down an incline with angle (θ).

The plane is incline and the only force acting in the object is the gravity, The weight or gravity acting in the horizontal direction parallel with the inclined surface is  mg sin(θ).

Thus, the correct option is C.

Learn more about net force.

https://brainly.com/question/18031889

#SPJ2

can someone please help me answer this question ?

Answers

Answer:

b 60 N force

Explanation:

The change in the momentum is given by the force•distance from the attached point. We don't have any distance, but apparently, the stick forces are being applied in each quarter of the stick, so let's use fractions of 4 to solve it:

150 N:

150•1/4 = 37.5

30 N:

30•2/4 = 30•1/2 = 15

60 N:

60•3/4 = 45

40 N:

40•4/4 = 40•1 = 40

I will give more points
for this thank you I u helped
me ​

Answers

Answer:

weight = mass×gravity

15×9.8147N

stay safe healthy and happy.

If a chemical spill reaches groundwater, the availability of which resource will be reduced for people in the area?
A. fish
B. drinking water
C. hydroelectric energy
D. geothermal energy

Answers

The answer is fish I’ve had this question before

True or false
scientific research has now proven that atoms are composed of parts that are larger than protons neutrons and electrons

Answers

Answer:

False

Explanation:

parts that are smaller than protons neutrons and electrons

False .......hope this helped you out
Other Questions
1. Hayes Enterprises began 2003 with a retained earnings balance of $820,000. During 2003, the firm earned $470,000 after taxes. From this amount, preferred stockholders were paid $47,000 in dividends. At year-end 2003, the firm's retained earnings totaled $1,040,000. The firm had 120,000 shares of common stock outstanding during 2003.a. Prepare a statement of retained earnings for the year ended December 31, 2003, for Hayes Enterprises. (Note: Be sure to calculate and include the amount of cash dividends paid in 2003.)b. Calculate the firm's 2003 earnings per share (EPS).c. How large a per-share cash dividend did the firm pay on common stock during 2003? Pls help Which type of reproduction provides organisms with the following advantages? Desirable traits can be selectively bred for in a population of organisms. More genetic diversity that might benefit individuals when environment changes.A. Asexual reproduction B. Sexual reproduction How did the invention of interchangeable parts revolutionize the way products like guns could be produced? Question 9Two sides of a triangle have lengths 10 and 15.What must be true about the length of the third side?Greater than 5 but less than 25Less than 15 Less than 25 answer pls with a detailed explanation Please help!!! 60 points change to passive voice let us sing together The difference between two positive numbers is 5 and the square of their sum is 169. find the two numbers. HELP PLEASEEE :) TY TYYYYY Madeleine says she can use a clock to show that 5/60 and 1/12 are equivalent fractions. Do you think she is correct? Explain. Give some ways in which rivers grow? ...It feels like the end of the world? pls help! its due today i would mark u brainliest! but pls it's an emergency do both problems! Electrical current is the flow of ____________A) heliumB) protonsC) atomsD) electronsHow much voltage is required to make 0.56 A flow through a 72-ohm resistance? [V = I x R]A)48 VB)36 VC)40 VD)52 VWILL GIVE BRAINLIEST!!! Please help with this, will give brainliest. que tipo de fermentacion es al mezclar el agua tibia con levadura please help (Determine the slope of the line. Show the work you did to find the slope.)10 POINTS! What is your opinion of the idea that accepting live difficulties make it easier to bear? What is true about plate tectonics?A. The plates are always moving, just too slow for us to feel most times.B. The Earths core is cold.C. The plates havent moved for over a million years.D. Landforms like mountains, volcanoes, and valleys existed before the movement of the plates. 1. Factory in WichitaThe cost per unit for Wichitas factory is graphed as a piecewise function over the domain [0, 35000]. a. Write one or two sentences to describe the cost function for the Wichita factory. (5 points) b. Write the piecewise function for the cost per unit for production of units in the Wichita factory. That is, state the function (), where is the number of units produced. (10 points) c. What is the cost per unit for 35,000 units? (5 points) d. According to the graph, if only one unit was produced, the cost per unit would be $1.00. In reality, the company would not call in its worker and start up the equipment to produce one unit. What safeguard do you think that many manufacturers use to avoid this type of problem? (5 points) e. Of the following three statements, choose the best option and write a viable argument showing how it is reflected by the Cost Function for Wichitas factory. (10 points) ___ The electricity contract with the utility company is structured so that higher daily energy usage is charged at a lower rate.___ The plants production processes are performed primarily by robots that are able to work longer hours, when needed, at no additional cost.___Overtime wages were required to produce at levels above 25,000 units.2. Factory in Seattle Seattles factory is the companys newest. It was constructed with sustainable building techniques and materials, so its cost structure has been affected in several ways. The Seattle plant uses a mix of solar power (not very reliable with so many clouds), thermal power, and wind. It has an array of batteries, so at the beginning of each production day, there is free stored energy that can produce up to 8,000 units. Of course, energy is just one factor of the cost of production, but it is significant.The cost function for the Seattle factory is given by the following piecewise function. That is, ()is the cost function, where is the number of units produced. The plants maximum capacity is 42,000 unitsper day.() = { 0.35 8,0000.75 8,000 < 20,0000.83 ( 200,000) 20,000 < 42,000a. Sketch a graph to model Seattles cost structure over the domain [0, 42000]. Be sure to label the axes and any endpoints where the graph breaks. (5 points)b. Describe the function over each part of its domain. State whether it is constant, increasing, or decreasing, and state the slope over each part. (5 points)3. Factory in Omaha Omahas factory has yet another type of cost structure. Its cost function is provided graphically. Its maximum capacity is 38,000 units per day. a. At what rate is the cost per unit decreasing for production levels above 12,000?(5 points) b. State the function for the domain over [12000, 38000]. (10 points)c. What is the cost per unit at the production level of 19,000? (5 points)Omahas city council approved a special growth incentive that decreases the companys tax burden for production levels above last years average. Explain how this is reflected by the Cost Function for Omahas factory. 4. Analysis and Making Production Decisions You have now provided your companys management with powerful tools that model the cost of